| U-Boot for LogicPD i.MX6 Development Kit |
| ---------------------------------------- |
| |
| This file contains information for the port of U-Boot to the Logic PD Development kit. |
| |
| Logic PD has an i.MX6 System On Module (SOM) and a correspondong development |
| board. SOM has a built-in microSD socket, DDR and NAND flash. The development kit has |
| an SMSC Ethernet PHY, serial debug port and a variety of peripherals. |
| |
| On the intial release, the SOM came with either an i.MX6D or i.MX6Q. |
| |
| For more details about Logic PD i.MX6 Development kit, visit: |
| https://www.logicpd.com/ |
| |
| Building U-Boot for Logic PD Development Kit |
| -------------------------------------------- |
| To build U-Boot for the Dual and Quad variants: |
| |
| make imx6q_logic_defconfig |
| make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux- |
| |
| |
| Flashing U-Boot into the SD card |
| -------------------------------- |
| |
| See README.imximage for details on booting from SD |
| |
| Flashing U-Boot into NAND |
| ------------------------- |
| Once in Linux with MTD support for the NAND on /dev/mtd0, program U-Boot with the following: |
| with: |
| |
| kobs-ng init -v -x u-boot-dtb.imx |
| |
| Additional Support Documentation can be found at: |
| https://support.logicpd.com/ |
| |