blob: 0265e9bb360b74d9422eecd833585f02d4440349 [file] [log] [blame]
/*
* (C) Copyright 2007 - 2013 Tensilica Inc.
* (C) Copyright 2014 - 2016 Cadence Design Systems Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <dm.h>
#include <dm/platform_data/net_ethoc.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/stringify.h>
#include <asm/global_data.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Check board idendity.
* (Print information about the board to stdout.)
*/
#if defined(CONFIG_XTFPGA_LX60)
const char *board = "XT_AV60";
const char *description = "Avnet Xilinx LX60 FPGA Evaluation Board / ";
#elif defined(CONFIG_XTFPGA_LX110)
const char *board = "XT_AV110";
const char *description = "Avnet Xilinx Virtex-5 LX110 Evaluation Kit / ";
#elif defined(CONFIG_XTFPGA_LX200)
const char *board = "XT_AV200";
const char *description = "Avnet Xilinx Virtex-4 LX200 Evaluation Kit / ";
#elif defined(CONFIG_XTFPGA_ML605)
const char *board = "XT_ML605";
const char *description = "Xilinx Virtex-6 FPGA ML605 Evaluation Kit / ";
#elif defined(CONFIG_XTFPGA_KC705)
const char *board = "XT_KC705";
const char *description = "Xilinx Kintex-7 FPGA KC705 Evaluation Kit / ";
#else
const char *board = "<unknown>";
const char *description = "";
#endif
int checkboard(void)
{
printf("Board: %s: %sTensilica bitstream\n", board, description);
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_memstart = PHYSADDR(CONFIG_SYS_SDRAM_BASE);
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
int board_postclk_init(void)
{
/*
* Obtain CPU clock frequency from board and cache in global
* data structure (Hz). Return 0 on success (OK to continue),
* else non-zero (hang).
*/
#ifdef CONFIG_SYS_FPGAREG_FREQ
gd->cpu_clk = (*(volatile unsigned long *)CONFIG_SYS_FPGAREG_FREQ);
#else
/* early Tensilica bitstreams lack this reg, but most run at 50 MHz */
gd->cpu_clk = 50000000UL;
#endif
return 0;
}
/*
* Miscellaneous late initializations.
* The environment has been set up, so we can set the Ethernet address.
*/
int misc_init_r(void)
{
#ifdef CONFIG_CMD_NET
/*
* Initialize ethernet environment variables and board info.
* Default MAC address comes from CONFIG_ETHADDR + DIP switches 1-6.
*/
char *s = getenv("ethaddr");
if (s == 0) {
unsigned int x;
char s[] = __stringify(CONFIG_ETHBASE);
x = (*(volatile u32 *)CONFIG_SYS_FPGAREG_DIPSW)
& FPGAREG_MAC_MASK;
sprintf(&s[15], "%02x", x);
setenv("ethaddr", s);
}
#endif /* CONFIG_CMD_NET */
return 0;
}
U_BOOT_DEVICE(sysreset) = {
.name = "xtfpga_sysreset",
};
static struct ethoc_eth_pdata ethoc_pdata = {
.eth_pdata = {
.iobase = CONFIG_SYS_ETHOC_BASE,
},
.packet_base = CONFIG_SYS_ETHOC_BUFFER_ADDR,
};
U_BOOT_DEVICE(ethoc) = {
.name = "ethoc",
.platdata = &ethoc_pdata,
};