| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net> |
| * |
| * Based on earlier arch/arm/cpu/armv7/sunxi/gpio.c: |
| * |
| * (C) Copyright 2007-2011 |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * Tom Cubie <tangliang@allwinnertech.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <malloc.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/io.h> |
| #include <asm/gpio.h> |
| #include <dm/device-internal.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| #define SUNXI_GPIOS_PER_BANK SUNXI_GPIO_A_NR |
| |
| struct sunxi_gpio_platdata { |
| struct sunxi_gpio *regs; |
| const char *bank_name; /* Name of bank, e.g. "B" */ |
| int gpio_count; |
| }; |
| |
| #if !CONFIG_IS_ENABLED(DM_GPIO) |
| static int sunxi_gpio_output(u32 pin, u32 val) |
| { |
| u32 dat; |
| u32 bank = GPIO_BANK(pin); |
| u32 num = GPIO_NUM(pin); |
| struct sunxi_gpio *pio = BANK_TO_GPIO(bank); |
| |
| dat = readl(&pio->dat); |
| if (val) |
| dat |= 0x1 << num; |
| else |
| dat &= ~(0x1 << num); |
| |
| writel(dat, &pio->dat); |
| |
| return 0; |
| } |
| |
| static int sunxi_gpio_input(u32 pin) |
| { |
| u32 dat; |
| u32 bank = GPIO_BANK(pin); |
| u32 num = GPIO_NUM(pin); |
| struct sunxi_gpio *pio = BANK_TO_GPIO(bank); |
| |
| dat = readl(&pio->dat); |
| dat >>= num; |
| |
| return dat & 0x1; |
| } |
| |
| int gpio_request(unsigned gpio, const char *label) |
| { |
| return 0; |
| } |
| |
| int gpio_free(unsigned gpio) |
| { |
| return 0; |
| } |
| |
| int gpio_direction_input(unsigned gpio) |
| { |
| sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_INPUT); |
| |
| return 0; |
| } |
| |
| int gpio_direction_output(unsigned gpio, int value) |
| { |
| sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_OUTPUT); |
| |
| return sunxi_gpio_output(gpio, value); |
| } |
| |
| int gpio_get_value(unsigned gpio) |
| { |
| return sunxi_gpio_input(gpio); |
| } |
| |
| int gpio_set_value(unsigned gpio, int value) |
| { |
| return sunxi_gpio_output(gpio, value); |
| } |
| |
| int sunxi_name_to_gpio(const char *name) |
| { |
| int group = 0; |
| int groupsize = 9 * 32; |
| long pin; |
| char *eptr; |
| |
| if (*name == 'P' || *name == 'p') |
| name++; |
| if (*name >= 'A') { |
| group = *name - (*name > 'a' ? 'a' : 'A'); |
| groupsize = 32; |
| name++; |
| } |
| |
| pin = simple_strtol(name, &eptr, 10); |
| if (!*name || *eptr) |
| return -1; |
| if (pin < 0 || pin > groupsize || group >= 9) |
| return -1; |
| return group * 32 + pin; |
| } |
| #endif /* DM_GPIO */ |
| |
| int sunxi_name_to_gpio_bank(const char *name) |
| { |
| int group = 0; |
| |
| if (*name == 'P' || *name == 'p') |
| name++; |
| if (*name >= 'A') { |
| group = *name - (*name > 'a' ? 'a' : 'A'); |
| return group; |
| } |
| |
| return -1; |
| } |
| |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| /* TODO(sjg@chromium.org): Remove this function and use device tree */ |
| int sunxi_name_to_gpio(const char *name) |
| { |
| unsigned int gpio; |
| int ret; |
| #if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO |
| char lookup[8]; |
| |
| if (strcasecmp(name, "AXP0-VBUS-DETECT") == 0) { |
| sprintf(lookup, SUNXI_GPIO_AXP0_PREFIX "%d", |
| SUNXI_GPIO_AXP0_VBUS_DETECT); |
| name = lookup; |
| } else if (strcasecmp(name, "AXP0-VBUS-ENABLE") == 0) { |
| sprintf(lookup, SUNXI_GPIO_AXP0_PREFIX "%d", |
| SUNXI_GPIO_AXP0_VBUS_ENABLE); |
| name = lookup; |
| } |
| #endif |
| ret = gpio_lookup_name(name, NULL, NULL, &gpio); |
| |
| return ret ? ret : gpio; |
| } |
| |
| static int sunxi_gpio_direction_input(struct udevice *dev, unsigned offset) |
| { |
| struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); |
| |
| sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_INPUT); |
| |
| return 0; |
| } |
| |
| static int sunxi_gpio_direction_output(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); |
| u32 num = GPIO_NUM(offset); |
| |
| sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_OUTPUT); |
| clrsetbits_le32(&plat->regs->dat, 1 << num, value ? (1 << num) : 0); |
| |
| return 0; |
| } |
| |
| static int sunxi_gpio_get_value(struct udevice *dev, unsigned offset) |
| { |
| struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); |
| u32 num = GPIO_NUM(offset); |
| unsigned dat; |
| |
| dat = readl(&plat->regs->dat); |
| dat >>= num; |
| |
| return dat & 0x1; |
| } |
| |
| static int sunxi_gpio_set_value(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); |
| u32 num = GPIO_NUM(offset); |
| |
| clrsetbits_le32(&plat->regs->dat, 1 << num, value ? (1 << num) : 0); |
| return 0; |
| } |
| |
| static int sunxi_gpio_get_function(struct udevice *dev, unsigned offset) |
| { |
| struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); |
| int func; |
| |
| func = sunxi_gpio_get_cfgbank(plat->regs, offset); |
| if (func == SUNXI_GPIO_OUTPUT) |
| return GPIOF_OUTPUT; |
| else if (func == SUNXI_GPIO_INPUT) |
| return GPIOF_INPUT; |
| else |
| return GPIOF_FUNC; |
| } |
| |
| static int sunxi_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, |
| struct ofnode_phandle_args *args) |
| { |
| int ret; |
| |
| ret = device_get_child(dev, args->args[0], &desc->dev); |
| if (ret) |
| return ret; |
| desc->offset = args->args[1]; |
| desc->flags = args->args[2] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0; |
| |
| return 0; |
| } |
| |
| static const struct dm_gpio_ops gpio_sunxi_ops = { |
| .direction_input = sunxi_gpio_direction_input, |
| .direction_output = sunxi_gpio_direction_output, |
| .get_value = sunxi_gpio_get_value, |
| .set_value = sunxi_gpio_set_value, |
| .get_function = sunxi_gpio_get_function, |
| .xlate = sunxi_gpio_xlate, |
| }; |
| |
| /** |
| * Returns the name of a GPIO bank |
| * |
| * GPIO banks are named A, B, C, ... |
| * |
| * @bank: Bank number (0, 1..n-1) |
| * @return allocated string containing the name |
| */ |
| static char *gpio_bank_name(int bank) |
| { |
| char *name; |
| |
| name = malloc(3); |
| if (name) { |
| name[0] = 'P'; |
| name[1] = 'A' + bank; |
| name[2] = '\0'; |
| } |
| |
| return name; |
| } |
| |
| static int gpio_sunxi_probe(struct udevice *dev) |
| { |
| struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| |
| /* Tell the uclass how many GPIOs we have */ |
| if (plat) { |
| uc_priv->gpio_count = plat->gpio_count; |
| uc_priv->bank_name = plat->bank_name; |
| } |
| |
| return 0; |
| } |
| |
| struct sunxi_gpio_soc_data { |
| int start; |
| int no_banks; |
| }; |
| |
| /** |
| * We have a top-level GPIO device with no actual GPIOs. It has a child |
| * device for each Sunxi bank. |
| */ |
| static int gpio_sunxi_bind(struct udevice *parent) |
| { |
| struct sunxi_gpio_soc_data *soc_data = |
| (struct sunxi_gpio_soc_data *)dev_get_driver_data(parent); |
| struct sunxi_gpio_platdata *plat = parent->platdata; |
| struct sunxi_gpio_reg *ctlr; |
| int bank, ret; |
| |
| /* If this is a child device, there is nothing to do here */ |
| if (plat) |
| return 0; |
| |
| ctlr = dev_read_addr_ptr(parent); |
| for (bank = 0; bank < soc_data->no_banks; bank++) { |
| struct sunxi_gpio_platdata *plat; |
| struct udevice *dev; |
| |
| plat = calloc(1, sizeof(*plat)); |
| if (!plat) |
| return -ENOMEM; |
| plat->regs = &ctlr->gpio_bank[bank]; |
| plat->bank_name = gpio_bank_name(soc_data->start + bank); |
| plat->gpio_count = SUNXI_GPIOS_PER_BANK; |
| |
| ret = device_bind(parent, parent->driver, |
| plat->bank_name, plat, -1, &dev); |
| if (ret) |
| return ret; |
| dev_set_of_offset(dev, dev_of_offset(parent)); |
| } |
| |
| return 0; |
| } |
| |
| static const struct sunxi_gpio_soc_data soc_data_a_all = { |
| .start = 0, |
| .no_banks = SUNXI_GPIO_BANKS, |
| }; |
| |
| static const struct sunxi_gpio_soc_data soc_data_l_1 = { |
| .start = 'L' - 'A', |
| .no_banks = 1, |
| }; |
| |
| static const struct sunxi_gpio_soc_data soc_data_l_2 = { |
| .start = 'L' - 'A', |
| .no_banks = 2, |
| }; |
| |
| static const struct sunxi_gpio_soc_data soc_data_l_3 = { |
| .start = 'L' - 'A', |
| .no_banks = 3, |
| }; |
| |
| #define ID(_compat_, _soc_data_) \ |
| { .compatible = _compat_, .data = (ulong)&soc_data_##_soc_data_ } |
| |
| static const struct udevice_id sunxi_gpio_ids[] = { |
| ID("allwinner,sun4i-a10-pinctrl", a_all), |
| ID("allwinner,sun5i-a10s-pinctrl", a_all), |
| ID("allwinner,sun5i-a13-pinctrl", a_all), |
| ID("allwinner,sun50i-h5-pinctrl", a_all), |
| ID("allwinner,sun6i-a31-pinctrl", a_all), |
| ID("allwinner,sun6i-a31s-pinctrl", a_all), |
| ID("allwinner,sun7i-a20-pinctrl", a_all), |
| ID("allwinner,sun8i-a23-pinctrl", a_all), |
| ID("allwinner,sun8i-a33-pinctrl", a_all), |
| ID("allwinner,sun8i-a83t-pinctrl", a_all), |
| ID("allwinner,sun8i-h3-pinctrl", a_all), |
| ID("allwinner,sun8i-r40-pinctrl", a_all), |
| ID("allwinner,sun8i-v3s-pinctrl", a_all), |
| ID("allwinner,sun9i-a80-pinctrl", a_all), |
| ID("allwinner,sun50i-a64-pinctrl", a_all), |
| ID("allwinner,sun50i-h6-pinctrl", a_all), |
| ID("allwinner,sun6i-a31-r-pinctrl", l_2), |
| ID("allwinner,sun8i-a23-r-pinctrl", l_1), |
| ID("allwinner,sun8i-a83t-r-pinctrl", l_1), |
| ID("allwinner,sun8i-h3-r-pinctrl", l_1), |
| ID("allwinner,sun9i-a80-r-pinctrl", l_3), |
| ID("allwinner,sun50i-a64-r-pinctrl", l_1), |
| ID("allwinner,sun50i-h6-r-pinctrl", l_2), |
| { } |
| }; |
| |
| U_BOOT_DRIVER(gpio_sunxi) = { |
| .name = "gpio_sunxi", |
| .id = UCLASS_GPIO, |
| .ops = &gpio_sunxi_ops, |
| .of_match = sunxi_gpio_ids, |
| .bind = gpio_sunxi_bind, |
| .probe = gpio_sunxi_probe, |
| }; |
| #endif /* DM_GPIO */ |