| /* |
| * Copyright (C) Freescale Semiconductor, Inc. 2007 |
| * |
| * Author: Scott Wood <scottwood@freescale.com>, |
| * with some bits from older board-specific PCI initialization. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <pci.h> |
| |
| #if defined(CONFIG_OF_LIBFDT) |
| #include <libfdt.h> |
| #elif defined(CONFIG_OF_FLAT_TREE) |
| #include <ft_build.h> |
| #endif |
| |
| #include <asm/mpc8349_pci.h> |
| |
| #ifdef CONFIG_83XX_GENERIC_PCI |
| #define MAX_BUSES 2 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static struct pci_controller pci_hose[MAX_BUSES]; |
| static int pci_num_buses; |
| |
| static void pci_init_bus(int bus, struct pci_region *reg) |
| { |
| volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; |
| volatile pot83xx_t *pot = immr->ios.pot; |
| volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus]; |
| struct pci_controller *hose = &pci_hose[bus]; |
| u32 dev; |
| u16 reg16; |
| int i; |
| |
| if (bus == 1) |
| pot += 3; |
| |
| /* Setup outbound translation windows */ |
| for (i = 0; i < 3; i++, reg++, pot++) { |
| if (reg->size == 0) |
| break; |
| |
| hose->regions[i] = *reg; |
| hose->region_count++; |
| |
| pot->potar = reg->bus_start >> 12; |
| pot->pobar = reg->phys_start >> 12; |
| pot->pocmr = ~(reg->size - 1) >> 12; |
| |
| if (reg->flags & PCI_REGION_IO) |
| pot->pocmr |= POCMR_IO; |
| #ifdef CONFIG_83XX_PCI_STREAMING |
| else if (reg->flags & PCI_REGION_PREFETCH) |
| pot->pocmr |= POCMR_SE; |
| #endif |
| |
| if (bus == 1) |
| pot->pocmr |= POCMR_DST; |
| |
| pot->pocmr |= POCMR_EN; |
| } |
| |
| /* Point inbound translation at RAM */ |
| pci_ctrl->pitar1 = 0; |
| pci_ctrl->pibar1 = 0; |
| pci_ctrl->piebar1 = 0; |
| pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | |
| PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); |
| |
| i = hose->region_count++; |
| hose->regions[i].bus_start = 0; |
| hose->regions[i].phys_start = 0; |
| hose->regions[i].size = gd->ram_size; |
| hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_MEMORY; |
| |
| hose->first_busno = 0; |
| hose->last_busno = 0xff; |
| |
| pci_setup_indirect(hose, CFG_IMMR + 0x8300 + bus * 0x80, |
| CFG_IMMR + 0x8304 + bus * 0x80); |
| |
| pci_register_hose(hose); |
| |
| /* |
| * Write to Command register |
| */ |
| reg16 = 0xff; |
| dev = PCI_BDF(hose->first_busno, 0, 0); |
| pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); |
| reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; |
| pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); |
| |
| /* |
| * Clear non-reserved bits in status register. |
| */ |
| pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); |
| pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); |
| pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); |
| |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| printf("PCI: Bus Dev VenId DevId Class Int\n"); |
| #endif |
| /* |
| * Hose scan. |
| */ |
| hose->last_busno = pci_hose_scan(hose); |
| } |
| |
| /* |
| * The caller must have already set OCCR, and the PCI_LAW BARs |
| * must have been set to cover all of the requested regions. |
| * |
| * If fewer than three regions are requested, then the region |
| * list is terminated with a region of size 0. |
| */ |
| void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot) |
| { |
| volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; |
| int i; |
| |
| if (num_buses > MAX_BUSES) { |
| printf("%d PCI buses requsted, %d supported\n", |
| num_buses, MAX_BUSES); |
| |
| num_buses = MAX_BUSES; |
| } |
| |
| pci_num_buses = num_buses; |
| |
| /* |
| * Release PCI RST Output signal. |
| * Power on to RST high must be at least 100 ms as per PCI spec. |
| * On warm boots only 1 ms is required. |
| */ |
| udelay(warmboot ? 1000 : 100000); |
| |
| for (i = 0; i < num_buses; i++) |
| immr->pci_ctrl[i].gcr = 1; |
| |
| /* |
| * RST high to first config access must be at least 2^25 cycles |
| * as per PCI spec. This could be cut in half if we know we're |
| * running at 66MHz. This could be insufficiently long if we're |
| * running the PCI bus at significantly less than 33MHz. |
| */ |
| udelay(1020000); |
| |
| for (i = 0; i < num_buses; i++) |
| pci_init_bus(i, reg[i]); |
| } |
| |
| #if defined(CONFIG_OF_LIBFDT) |
| void ft_pci_setup(void *blob, bd_t *bd) |
| { |
| int nodeoffset; |
| int err; |
| int tmp[2]; |
| |
| if (pci_num_buses < 1) |
| return; |
| |
| nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); |
| if (nodeoffset >= 0) { |
| tmp[0] = cpu_to_be32(pci_hose[0].first_busno); |
| tmp[1] = cpu_to_be32(pci_hose[0].last_busno); |
| err = fdt_setprop(blob, nodeoffset, "bus-range", |
| tmp, sizeof(tmp)); |
| |
| tmp[0] = cpu_to_be32(gd->pci_clk); |
| err = fdt_setprop(blob, nodeoffset, "clock-frequency", |
| tmp, sizeof(tmp[0])); |
| } |
| |
| if (pci_num_buses < 2) |
| return; |
| |
| nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600"); |
| if (nodeoffset >= 0) { |
| tmp[0] = cpu_to_be32(pci_hose[0].first_busno); |
| tmp[1] = cpu_to_be32(pci_hose[0].last_busno); |
| err = fdt_setprop(blob, nodeoffset, "bus-range", |
| tmp, sizeof(tmp)); |
| |
| tmp[0] = cpu_to_be32(gd->pci_clk); |
| err = fdt_setprop(blob, nodeoffset, "clock-frequency", |
| tmp, sizeof(tmp[0])); |
| } |
| } |
| #elif CONFIG_OF_FLAT_TREE |
| void ft_pci_setup(void *blob, bd_t *bd) |
| { |
| u32 *p; |
| int len; |
| |
| if (pci_num_buses < 1) |
| return; |
| |
| p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); |
| if (p) { |
| p[0] = pci_hose[0].first_busno; |
| p[1] = pci_hose[0].last_busno; |
| } |
| |
| if (pci_num_buses < 2) |
| return; |
| |
| p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); |
| if (p) { |
| p[0] = pci_hose[1].first_busno; |
| p[1] = pci_hose[1].last_busno; |
| } |
| } |
| #endif /* CONFIG_OF_FLAT_TREE */ |
| |
| #endif /* CONFIG_83XX_GENERIC_PCI */ |