| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2019 MediaTek, Inc. |
| * Authors: Chunfeng Yun <chunfeng.yun@mediatek.com> |
| */ |
| |
| #include <clk.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <dm/devres.h> |
| #include <generic-phy.h> |
| #include <malloc.h> |
| #include <usb.h> |
| #include <linux/errno.h> |
| #include <linux/compat.h> |
| #include <power/regulator.h> |
| #include <linux/iopoll.h> |
| #include <usb/xhci.h> |
| |
| /* IPPC (IP Port Control) registers */ |
| #define IPPC_IP_PW_CTRL0 0x00 |
| #define CTRL0_IP_SW_RST BIT(0) |
| |
| #define IPPC_IP_PW_CTRL1 0x04 |
| #define CTRL1_IP_HOST_PDN BIT(0) |
| |
| #define IPPC_IP_PW_STS1 0x10 |
| #define STS1_IP_SLEEP_STS BIT(30) |
| #define STS1_U3_MAC_RST BIT(16) |
| #define STS1_XHCI_RST BIT(11) |
| #define STS1_SYS125_RST BIT(10) |
| #define STS1_REF_RST BIT(8) |
| #define STS1_SYSPLL_STABLE BIT(0) |
| |
| #define IPPC_IP_XHCI_CAP 0x24 |
| #define CAP_U3_PORT_NUM(p) ((p) & 0xff) |
| #define CAP_U2_PORT_NUM(p) (((p) >> 8) & 0xff) |
| |
| #define IPPC_U3_CTRL_0P 0x30 |
| #define CTRL_U3_PORT_HOST_SEL BIT(2) |
| #define CTRL_U3_PORT_PDN BIT(1) |
| #define CTRL_U3_PORT_DIS BIT(0) |
| |
| #define IPPC_U2_CTRL_0P 0x50 |
| #define CTRL_U2_PORT_HOST_SEL BIT(2) |
| #define CTRL_U2_PORT_PDN BIT(1) |
| #define CTRL_U2_PORT_DIS BIT(0) |
| |
| #define IPPC_U3_CTRL(p) (IPPC_U3_CTRL_0P + ((p) * 0x08)) |
| #define IPPC_U2_CTRL(p) (IPPC_U2_CTRL_0P + ((p) * 0x08)) |
| |
| struct mtk_xhci { |
| struct xhci_ctrl ctrl; /* Needs to come first in this struct! */ |
| struct xhci_hccr *hcd; |
| void __iomem *ippc; |
| struct udevice *dev; |
| struct udevice *vusb33_supply; |
| struct udevice *vbus_supply; |
| struct clk_bulk clks; |
| struct phy_bulk phys; |
| int num_u2ports; |
| int num_u3ports; |
| }; |
| |
| static int xhci_mtk_host_enable(struct mtk_xhci *mtk) |
| { |
| u32 value; |
| u32 check_val; |
| int ret; |
| int i; |
| |
| /* power on host ip */ |
| clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN); |
| |
| /* power on and enable all u3 ports */ |
| for (i = 0; i < mtk->num_u3ports; i++) { |
| clrsetbits_le32(mtk->ippc + IPPC_U3_CTRL(i), |
| CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS, |
| CTRL_U3_PORT_HOST_SEL); |
| } |
| |
| /* power on and enable all u2 ports */ |
| for (i = 0; i < mtk->num_u2ports; i++) { |
| clrsetbits_le32(mtk->ippc + IPPC_U2_CTRL(i), |
| CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS, |
| CTRL_U2_PORT_HOST_SEL); |
| } |
| |
| /* |
| * wait for clocks to be stable, and clock domains reset to |
| * be inactive after power on and enable ports |
| */ |
| check_val = STS1_SYSPLL_STABLE | STS1_REF_RST | |
| STS1_SYS125_RST | STS1_XHCI_RST; |
| |
| if (mtk->num_u3ports) |
| check_val |= STS1_U3_MAC_RST; |
| |
| ret = readl_poll_timeout(mtk->ippc + IPPC_IP_PW_STS1, value, |
| (check_val == (value & check_val)), 20000); |
| if (ret) |
| dev_err(mtk->dev, "clocks are not stable 0x%x!\n", value); |
| |
| return ret; |
| } |
| |
| static int xhci_mtk_host_disable(struct mtk_xhci *mtk) |
| { |
| int i; |
| |
| /* power down all u3 ports */ |
| for (i = 0; i < mtk->num_u3ports; i++) |
| setbits_le32(mtk->ippc + IPPC_U3_CTRL(i), CTRL_U3_PORT_PDN); |
| |
| /* power down all u2 ports */ |
| for (i = 0; i < mtk->num_u2ports; i++) |
| setbits_le32(mtk->ippc + IPPC_U2_CTRL(i), CTRL_U2_PORT_PDN); |
| |
| /* power down host ip */ |
| setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN); |
| |
| return 0; |
| } |
| |
| static int xhci_mtk_ssusb_init(struct mtk_xhci *mtk) |
| { |
| u32 value; |
| |
| /* reset whole ip */ |
| setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST); |
| udelay(1); |
| clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST); |
| |
| value = readl(mtk->ippc + IPPC_IP_XHCI_CAP); |
| mtk->num_u3ports = CAP_U3_PORT_NUM(value); |
| mtk->num_u2ports = CAP_U2_PORT_NUM(value); |
| dev_info(mtk->dev, "u2p:%d, u3p:%d\n", |
| mtk->num_u2ports, mtk->num_u3ports); |
| |
| return xhci_mtk_host_enable(mtk); |
| } |
| |
| static int xhci_mtk_ofdata_get(struct mtk_xhci *mtk) |
| { |
| struct udevice *dev = mtk->dev; |
| int ret = 0; |
| |
| mtk->hcd = devfdt_remap_addr_name(dev, "mac"); |
| if (!mtk->hcd) { |
| dev_err(dev, "failed to get xHCI base address\n"); |
| return -ENXIO; |
| } |
| |
| mtk->ippc = devfdt_remap_addr_name(dev, "ippc"); |
| if (!mtk->ippc) { |
| dev_err(dev, "failed to get IPPC base address\n"); |
| return -ENXIO; |
| } |
| |
| dev_info(dev, "hcd: 0x%p, ippc: 0x%p\n", mtk->hcd, mtk->ippc); |
| |
| ret = clk_get_bulk(dev, &mtk->clks); |
| if (ret) { |
| dev_err(dev, "failed to get clocks %d!\n", ret); |
| return ret; |
| } |
| |
| ret = device_get_supply_regulator(dev, "vusb33-supply", |
| &mtk->vusb33_supply); |
| if (ret) |
| debug("can't get vusb33 regulator %d!\n", ret); |
| |
| ret = device_get_supply_regulator(dev, "vbus-supply", |
| &mtk->vbus_supply); |
| if (ret) |
| debug("can't get vbus regulator %d!\n", ret); |
| |
| return 0; |
| } |
| |
| static int xhci_mtk_ldos_enable(struct mtk_xhci *mtk) |
| { |
| int ret; |
| |
| ret = regulator_set_enable(mtk->vusb33_supply, true); |
| if (ret < 0 && ret != -ENOSYS) { |
| dev_err(mtk->dev, "failed to enable vusb33 %d!\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_set_enable(mtk->vbus_supply, true); |
| if (ret < 0 && ret != -ENOSYS) { |
| dev_err(mtk->dev, "failed to enable vbus %d!\n", ret); |
| regulator_set_enable(mtk->vusb33_supply, false); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void xhci_mtk_ldos_disable(struct mtk_xhci *mtk) |
| { |
| regulator_set_enable(mtk->vbus_supply, false); |
| regulator_set_enable(mtk->vusb33_supply, false); |
| } |
| |
| static int xhci_mtk_phy_setup(struct mtk_xhci *mtk) |
| { |
| struct udevice *dev = mtk->dev; |
| struct phy_bulk *phys = &mtk->phys; |
| int ret; |
| |
| ret = generic_phy_get_bulk(dev, phys); |
| if (ret) |
| return ret; |
| |
| ret = generic_phy_init_bulk(phys); |
| if (ret) |
| return ret; |
| |
| ret = generic_phy_power_on_bulk(phys); |
| if (ret) |
| generic_phy_exit_bulk(phys); |
| |
| return ret; |
| } |
| |
| static void xhci_mtk_phy_shutdown(struct mtk_xhci *mtk) |
| { |
| generic_phy_power_off_bulk(&mtk->phys); |
| generic_phy_exit_bulk(&mtk->phys); |
| } |
| |
| static int xhci_mtk_probe(struct udevice *dev) |
| { |
| struct mtk_xhci *mtk = dev_get_priv(dev); |
| struct xhci_hcor *hcor; |
| int ret; |
| |
| mtk->dev = dev; |
| ret = xhci_mtk_ofdata_get(mtk); |
| if (ret) |
| return ret; |
| |
| ret = xhci_mtk_ldos_enable(mtk); |
| if (ret) |
| goto ldos_err; |
| |
| ret = clk_enable_bulk(&mtk->clks); |
| if (ret) |
| goto clks_err; |
| |
| ret = xhci_mtk_phy_setup(mtk); |
| if (ret) |
| goto phys_err; |
| |
| ret = xhci_mtk_ssusb_init(mtk); |
| if (ret) |
| goto ssusb_init_err; |
| |
| mtk->ctrl.quirks = XHCI_MTK_HOST; |
| hcor = (struct xhci_hcor *)((uintptr_t)mtk->hcd + |
| HC_LENGTH(xhci_readl(&mtk->hcd->cr_capbase))); |
| |
| return xhci_register(dev, mtk->hcd, hcor); |
| |
| ssusb_init_err: |
| xhci_mtk_phy_shutdown(mtk); |
| phys_err: |
| clk_disable_bulk(&mtk->clks); |
| clks_err: |
| xhci_mtk_ldos_disable(mtk); |
| ldos_err: |
| return ret; |
| } |
| |
| static int xhci_mtk_remove(struct udevice *dev) |
| { |
| struct mtk_xhci *mtk = dev_get_priv(dev); |
| |
| xhci_deregister(dev); |
| xhci_mtk_host_disable(mtk); |
| xhci_mtk_ldos_disable(mtk); |
| clk_disable_bulk(&mtk->clks); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id xhci_mtk_ids[] = { |
| { .compatible = "mediatek,mtk-xhci" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(usb_xhci) = { |
| .name = "xhci-mtk", |
| .id = UCLASS_USB, |
| .of_match = xhci_mtk_ids, |
| .probe = xhci_mtk_probe, |
| .remove = xhci_mtk_remove, |
| .ops = &xhci_usb_ops, |
| .bind = dm_scan_fdt_dev, |
| .priv_auto_alloc_size = sizeof(struct mtk_xhci), |
| .flags = DM_FLAG_ALLOC_PRIV_DMA, |
| }; |