| /dts-v1/; |
| / { |
| compatible = "nds32 ae3xx"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&intc>; |
| |
| aliases { |
| uart0 = &serial0; |
| ethernet0 = &mac0; |
| spi0 = &spi; |
| } ; |
| |
| chosen { |
| /* bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug bootmem_debug memblock=debug loglevel=7"; */ |
| bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug loglevel=7"; |
| stdout-path = "uart0:38400n8"; |
| tick-timer = &timer0; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x00000000 0x40000000>; |
| }; |
| |
| spiclk: virt_100mhz { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <100000000>; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cpu@0 { |
| compatible = "andestech,n13"; |
| reg = <0>; |
| /* FIXME: to fill correct frqeuency */ |
| clock-frequency = <60000000>; |
| }; |
| }; |
| |
| intc: interrupt-controller { |
| compatible = "andestech,atnointc010"; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| }; |
| |
| serial0: serial@f0300000 { |
| compatible = "andestech,uart16550", "ns16550a"; |
| reg = <0xf0300000 0x1000>; |
| interrupts = <7 4>; |
| clock-frequency = <14745600>; |
| reg-shift = <2>; |
| reg-offset = <32>; |
| no-loopback-test = <1>; |
| }; |
| |
| timer0: timer@f0400000 { |
| compatible = "andestech,atcpit100"; |
| reg = <0xf0400000 0x1000>; |
| interrupts = <2 4>; |
| clock-frequency = <30000000>; |
| }; |
| |
| mac0: mac@e0100000 { |
| compatible = "andestech,atmac100"; |
| reg = <0xe0100000 0x1000>; |
| interrupts = <25 4>; |
| }; |
| |
| mmc0: mmc@f0e00000 { |
| compatible = "andestech,atfsdc010"; |
| max-frequency = <100000000>; |
| fifo-depth = <0x10>; |
| reg = <0xf0e00000 0x1000>; |
| interrupts = <17 4>; |
| }; |
| |
| nor@0,0 { |
| compatible = "cfi-flash"; |
| reg = <0x88000000 0x1000>; |
| bank-width = <2>; |
| device-width = <1>; |
| }; |
| |
| spi: spi@f0b00000 { |
| compatible = "andestech,atcspi200"; |
| reg = <0xf0b00000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| num-cs = <1>; |
| clocks = <&spiclk>; |
| interrupts = <3 4>; |
| flash@0 { |
| compatible = "spi-flash"; |
| spi-max-frequency = <50000000>; |
| reg = <0>; |
| spi-cpol; |
| spi-cpha; |
| }; |
| }; |
| }; |