| /* |
| * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <asm/io.h> |
| #include <asm/arch/gxbb.h> |
| #include <asm/arch/sm.h> |
| #include <asm/arch/eth.h> |
| #include <asm/arch/mem.h> |
| |
| #define EFUSE_SN_OFFSET 20 |
| #define EFUSE_SN_SIZE 16 |
| #define EFUSE_MAC_OFFSET 52 |
| #define EFUSE_MAC_SIZE 6 |
| |
| int board_init(void) |
| { |
| return 0; |
| } |
| |
| int misc_init_r(void) |
| { |
| u8 mac_addr[EFUSE_MAC_SIZE]; |
| char serial[EFUSE_SN_SIZE]; |
| ssize_t len; |
| |
| meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); |
| |
| /* Enable power and clock gate */ |
| setbits_le32(GXBB_GCLK_MPEG_0, GXBB_GCLK_MPEG_0_I2C); |
| |
| /* Reset PHY on GPIOZ_14 */ |
| clrbits_le32(GXBB_GPIO_EN(3), BIT(14)); |
| clrbits_le32(GXBB_GPIO_OUT(3), BIT(14)); |
| mdelay(10); |
| setbits_le32(GXBB_GPIO_OUT(3), BIT(14)); |
| |
| if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { |
| len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, |
| mac_addr, EFUSE_MAC_SIZE); |
| if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) |
| eth_env_set_enetaddr("ethaddr", mac_addr); |
| } |
| |
| if (!env_get("serial#")) { |
| len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, |
| EFUSE_SN_SIZE); |
| if (len == EFUSE_SN_SIZE) |
| env_set("serial#", serial); |
| } |
| |
| return 0; |
| } |
| |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| meson_gx_init_reserved_memory(blob); |
| |
| return 0; |
| } |