blob: 8d4a8cd0c2db38d29d3fe2dfc29bcc9d38c1c158 [file] [log] [blame]
/*
* (C) Copyright 2009
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __MANROLAND_COMMON_H
#define __MANROLAND_COMMON_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_BOARD_EARLY_INIT_R
/* Partitions */
#define CONFIG_DOS_PARTITION
/*
* Command line configuration.
*/
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DISPLAY
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_DTT
#define CONFIG_CMD_IDE
/*
* 8-symbol LED display (can be accessed with 'display' command)
*/
#define CONFIG_PDSP188x
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
/*
* Autobooting
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addwdt=setenv bootargs ${bootargs} wdt=off\0" \
"logval=4\0" \
"addlog=setenv bootargs ${bootargs} loglevel=${logval}\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"kernel_addr=ff810000\0" \
"fdt_addr="__stringify(CONFIG_SYS_FLASH_BASE)"\0" \
"flash_nfs=run nfsargs addip addcon addwdt addlog;" \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
"rootpath=/opt/eldk/ppc_82xx\0" \
"kernel_addr_r=300000\0" \
"fdt_addr_r=200000\0" \
"fdt_file=" __stringify(CONFIG_HOSTNAME) "/" \
__stringify(CONFIG_HOSTNAME) ".dtb\0" \
"kernel_file=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \
"load_fdt=tftp ${fdt_addr_r} ${fdt_file};\0" \
"load_kernel=tftp ${kernel_addr_r} ${kernel_file};\0" \
"addcon=setenv bootargs ${bootargs} console=ttyPSC0,${baudrate}\0"\
"net_nfs=run load_fdt load_kernel; " \
"run nfsargs addip addcon addwdt addlog;" \
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin \0" \
"u-boot_addr_r=200000\0" \
"load=tftp ${u-boot_addr_r} ${u-boot}\0" \
"update=protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize};"\
"erase " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize};"\
"cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_TEXT_BASE) \
" ${filesize};" \
"protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize}\0"\
""
#define CONFIG_BOOTCOMMAND "run net_nfs"
#define CONFIG_MISC_INIT_R 1
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
/* Enable an alternate, more extensive memory test */
#define CONFIG_SYS_ALT_MEMTEST
/*
* Enable loopw command.
*/
#endif /* __MANROLAND_COMMON_H */