| /* |
| * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. |
| * (C) Copyright 2007 DENX Software Engineering |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * CPU specific code for the MPC512x family. |
| * |
| * Derived from the MPC83xx code. |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <net.h> |
| #include <netdev.h> |
| #include <asm/processor.h> |
| |
| #if defined(CONFIG_OF_LIBFDT) |
| #include <fdt_support.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int checkcpu (void) |
| { |
| volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; |
| ulong clock = gd->cpu_clk; |
| u32 pvr = get_pvr (); |
| u32 spridr = immr->sysconf.spridr; |
| char buf1[32], buf2[32]; |
| |
| puts ("CPU: "); |
| |
| switch (spridr & 0xffff0000) { |
| case SPR_5121E: |
| puts ("MPC5121e "); |
| break; |
| default: |
| printf ("Unknown part ID %08x ", spridr & 0xffff0000); |
| } |
| printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr)); |
| |
| switch (pvr & 0xffff0000) { |
| case PVR_E300C4: |
| puts ("e300c4 "); |
| break; |
| default: |
| puts ("unknown "); |
| } |
| printf ("at %s MHz, CSB at %s MHz\n", |
| strmhz(buf1, clock), |
| strmhz(buf2, gd->csb_clk) ); |
| return 0; |
| } |
| |
| |
| int |
| do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) |
| { |
| ulong msr; |
| volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; |
| |
| /* Interrupts and MMU off */ |
| __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); |
| |
| msr &= ~( MSR_EE | MSR_IR | MSR_DR); |
| __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); |
| |
| /* |
| * Enable Reset Control Reg - "RSTE" is the magic word that let us go |
| */ |
| immap->reset.rpr = 0x52535445; |
| |
| /* Verify Reset Control Reg is enabled */ |
| while (!((immap->reset.rcer) & RCER_CRE)) |
| ; |
| |
| printf ("Resetting the board.\n"); |
| udelay(200); |
| |
| /* Perform reset */ |
| immap->reset.rcr = RCR_SWHR; |
| |
| /* Unreached... */ |
| return 1; |
| } |
| |
| |
| /* |
| * Get timebase clock frequency (like cpu_clk in Hz) |
| */ |
| unsigned long get_tbclk (void) |
| { |
| ulong tbclk; |
| |
| tbclk = (gd->bus_clk + 3L) / 4L; |
| |
| return tbclk; |
| } |
| |
| |
| #if defined(CONFIG_WATCHDOG) |
| void watchdog_reset (void) |
| { |
| int re_enable = disable_interrupts (); |
| |
| /* Reset watchdog */ |
| volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; |
| immr->wdt.swsrr = 0x556c; |
| immr->wdt.swsrr = 0xaa39; |
| |
| if (re_enable) |
| enable_interrupts (); |
| } |
| #endif |
| |
| #ifdef CONFIG_OF_LIBFDT |
| |
| #ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES |
| /* |
| * fdt setup for old device trees |
| * fix up |
| * cpu clocks |
| * soc clocks |
| * ethernet addresses |
| */ |
| static void old_ft_cpu_setup(void *blob, bd_t *bd) |
| { |
| /* |
| * avoid fixing up by path because that |
| * produces scary error messages |
| */ |
| uchar enetaddr[6]; |
| |
| /* |
| * old device trees have ethernet nodes with |
| * device_type = "network" |
| */ |
| eth_getenv_enetaddr("ethaddr", enetaddr); |
| do_fixup_by_prop(blob, "device_type", "network", 8, |
| "local-mac-address", enetaddr, 6, 0); |
| do_fixup_by_prop(blob, "device_type", "network", 8, |
| "address", enetaddr, 6, 0); |
| /* |
| * old device trees have soc nodes with |
| * device_type = "soc" |
| */ |
| do_fixup_by_prop_u32(blob, "device_type", "soc", 4, |
| "bus-frequency", bd->bi_ipsfreq, 0); |
| } |
| #endif |
| |
| static void ft_clock_setup(void *blob, bd_t *bd) |
| { |
| char *cpu_path = "/cpus/" OF_CPU; |
| |
| /* |
| * fixup cpu clocks using path |
| */ |
| do_fixup_by_path_u32(blob, cpu_path, |
| "timebase-frequency", OF_TBCLK, 1); |
| do_fixup_by_path_u32(blob, cpu_path, |
| "bus-frequency", bd->bi_busfreq, 1); |
| do_fixup_by_path_u32(blob, cpu_path, |
| "clock-frequency", bd->bi_intfreq, 1); |
| /* |
| * fixup soc clocks using compatible |
| */ |
| do_fixup_by_compat_u32(blob, OF_SOC_COMPAT, |
| "bus-frequency", bd->bi_ipsfreq, 1); |
| } |
| |
| void ft_cpu_setup(void *blob, bd_t *bd) |
| { |
| #ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES |
| old_ft_cpu_setup(blob, bd); |
| #endif |
| ft_clock_setup(blob, bd); |
| #ifdef CONFIG_HAS_ETH0 |
| fdt_fixup_ethernet(blob); |
| #endif |
| fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); |
| } |
| #endif |
| |
| #ifdef CONFIG_MPC512x_FEC |
| /* Default initializations for FEC controllers. To override, |
| * create a board-specific function called: |
| * int board_eth_init(bd_t *bis) |
| */ |
| |
| int cpu_eth_init(bd_t *bis) |
| { |
| return mpc512x_fec_initialize(bis); |
| } |
| #endif |