| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * eSPI controller driver. |
| * |
| * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| * Copyright 2020 NXP |
| * Author: Mingkai Hu (Mingkai.hu@freescale.com) |
| * Chuanhua Han (chuanhua.han@nxp.com) |
| */ |
| |
| #include <common.h> |
| #include <log.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| |
| #include <malloc.h> |
| #include <spi.h> |
| #include <asm/immap_85xx.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <dm/platform_data/fsl_espi.h> |
| |
| struct fsl_spi_slave { |
| struct spi_slave slave; |
| ccsr_espi_t *espi; |
| u32 speed_hz; |
| unsigned int cs; |
| unsigned int div16; |
| unsigned int pm; |
| int tx_timeout; |
| unsigned int mode; |
| size_t cmd_len; |
| u8 cmd_buf[16]; |
| size_t data_len; |
| unsigned int max_transfer_length; |
| }; |
| |
| #define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) |
| #define US_PER_SECOND 1000000UL |
| |
| /* default SCK frequency, unit: HZ */ |
| #define FSL_ESPI_DEFAULT_SCK_FREQ 10000000 |
| |
| #define ESPI_MAX_CS_NUM 4 |
| #define ESPI_FIFO_WIDTH_BIT 32 |
| |
| #define ESPI_EV_RNE BIT(9) |
| #define ESPI_EV_TNF BIT(8) |
| #define ESPI_EV_DON BIT(14) |
| #define ESPI_EV_TXE BIT(15) |
| #define ESPI_EV_RFCNT_SHIFT 24 |
| #define ESPI_EV_RFCNT_MASK (0x3f << ESPI_EV_RFCNT_SHIFT) |
| |
| #define ESPI_MODE_EN BIT(31) /* Enable interface */ |
| #define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */ |
| #define ESPI_MODE_RXTHR(x) ((x) << 0) /* Rx FIFO threshold */ |
| |
| #define ESPI_COM_CS(x) ((x) << 30) |
| #define ESPI_COM_TRANLEN(x) ((x) << 0) |
| |
| #define ESPI_CSMODE_CI_INACTIVEHIGH BIT(31) |
| #define ESPI_CSMODE_CP_BEGIN_EDGCLK BIT(30) |
| #define ESPI_CSMODE_REV_MSB_FIRST BIT(29) |
| #define ESPI_CSMODE_DIV16 BIT(28) |
| #define ESPI_CSMODE_PM(x) ((x) << 24) |
| #define ESPI_CSMODE_POL_ASSERTED_LOW BIT(20) |
| #define ESPI_CSMODE_LEN(x) ((x) << 16) |
| #define ESPI_CSMODE_CSBEF(x) ((x) << 12) |
| #define ESPI_CSMODE_CSAFT(x) ((x) << 8) |
| #define ESPI_CSMODE_CSCG(x) ((x) << 3) |
| |
| #define ESPI_CSMODE_INIT_VAL (ESPI_CSMODE_POL_ASSERTED_LOW | \ |
| ESPI_CSMODE_CSBEF(0) | ESPI_CSMODE_CSAFT(0) | \ |
| ESPI_CSMODE_CSCG(1)) |
| |
| #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 |
| |
| void fsl_spi_cs_activate(struct spi_slave *slave, uint cs) |
| { |
| struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| ccsr_espi_t *espi = fsl->espi; |
| unsigned int com = 0; |
| size_t data_len = fsl->data_len; |
| |
| com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); |
| com |= ESPI_COM_CS(cs); |
| com |= ESPI_COM_TRANLEN(data_len - 1); |
| out_be32(&espi->com, com); |
| } |
| |
| void fsl_spi_cs_deactivate(struct spi_slave *slave) |
| { |
| struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| ccsr_espi_t *espi = fsl->espi; |
| |
| /* clear the RXCNT and TXCNT */ |
| out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); |
| out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); |
| } |
| |
| static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout) |
| { |
| ccsr_espi_t *espi = fsl->espi; |
| unsigned int tmpdout, event; |
| int tmp_tx_timeout; |
| |
| if (dout) |
| tmpdout = *(u32 *)dout; |
| else |
| tmpdout = 0; |
| |
| out_be32(&espi->tx, tmpdout); |
| out_be32(&espi->event, ESPI_EV_TNF); |
| debug("***spi_xfer:...%08x written\n", tmpdout); |
| |
| tmp_tx_timeout = fsl->tx_timeout; |
| /* Wait for eSPI transmit to go out */ |
| while (tmp_tx_timeout--) { |
| event = in_be32(&espi->event); |
| if (event & ESPI_EV_DON || event & ESPI_EV_TXE) { |
| out_be32(&espi->event, ESPI_EV_TXE); |
| break; |
| } |
| udelay(1); |
| } |
| |
| if (tmp_tx_timeout < 0) |
| debug("***spi_xfer:...Tx timeout! event = %08x\n", event); |
| } |
| |
| static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, |
| unsigned int bytes) |
| { |
| ccsr_espi_t *espi = fsl->espi; |
| unsigned int tmpdin, rx_times; |
| unsigned char *buf, *p_cursor; |
| |
| if (bytes <= 0) |
| return 0; |
| |
| rx_times = DIV_ROUND_UP(bytes, 4); |
| buf = (unsigned char *)malloc(4 * rx_times); |
| if (!buf) { |
| debug("SF: Failed to malloc memory.\n"); |
| return -1; |
| } |
| p_cursor = buf; |
| while (rx_times--) { |
| tmpdin = in_be32(&espi->rx); |
| debug("***spi_xfer:...%08x readed\n", tmpdin); |
| *(u32 *)p_cursor = tmpdin; |
| p_cursor += 4; |
| } |
| |
| if (din) |
| memcpy(din, buf, bytes); |
| |
| free(buf); |
| out_be32(&espi->event, ESPI_EV_RNE); |
| |
| return bytes; |
| } |
| |
| void espi_release_bus(struct fsl_spi_slave *fsl) |
| { |
| /* Disable the SPI hardware */ |
| out_be32(&fsl->espi->mode, |
| in_be32(&fsl->espi->mode) & (~ESPI_MODE_EN)); |
| } |
| |
| int espi_xfer(struct fsl_spi_slave *fsl, uint cs, unsigned int bitlen, |
| const void *data_out, void *data_in, unsigned long flags) |
| { |
| struct spi_slave *slave = &fsl->slave; |
| ccsr_espi_t *espi = fsl->espi; |
| unsigned int event, rx_bytes; |
| const void *dout = NULL; |
| void *din = NULL; |
| int len = 0; |
| int num_blks, num_chunks, max_tran_len, tran_len; |
| int num_bytes; |
| unsigned char *buffer = NULL; |
| size_t buf_len; |
| u8 *cmd_buf = fsl->cmd_buf; |
| size_t cmd_len = fsl->cmd_len; |
| size_t data_len = bitlen / 8; |
| size_t rx_offset = 0; |
| int rf_cnt; |
| |
| max_tran_len = fsl->max_transfer_length; |
| switch (flags) { |
| case SPI_XFER_BEGIN: |
| cmd_len = data_len; |
| fsl->cmd_len = cmd_len; |
| memcpy(cmd_buf, data_out, cmd_len); |
| return 0; |
| case 0: |
| case SPI_XFER_END: |
| if (bitlen == 0) { |
| fsl_spi_cs_deactivate(slave); |
| return 0; |
| } |
| buf_len = 2 * cmd_len + min(data_len, (size_t)max_tran_len); |
| len = cmd_len + data_len; |
| rx_offset = cmd_len; |
| buffer = (unsigned char *)malloc(buf_len); |
| if (!buffer) { |
| debug("SF: Failed to malloc memory.\n"); |
| return 1; |
| } |
| memcpy(buffer, cmd_buf, cmd_len); |
| if (data_in == NULL) |
| memcpy(buffer + cmd_len, data_out, data_len); |
| break; |
| case SPI_XFER_BEGIN | SPI_XFER_END: |
| len = data_len; |
| buffer = (unsigned char *)malloc(len * 2); |
| if (!buffer) { |
| debug("SF: Failed to malloc memory.\n"); |
| return 1; |
| } |
| memcpy(buffer, data_out, len); |
| rx_offset = len; |
| cmd_len = 0; |
| break; |
| } |
| |
| debug("spi_xfer: data_out %08X(%p) data_in %08X(%p) len %u\n", |
| *(uint *)data_out, data_out, *(uint *)data_in, data_in, len); |
| |
| num_chunks = DIV_ROUND_UP(data_len, max_tran_len); |
| while (num_chunks--) { |
| if (data_in) |
| din = buffer + rx_offset; |
| dout = buffer; |
| tran_len = min(data_len, (size_t)max_tran_len); |
| num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4); |
| num_bytes = (tran_len + cmd_len) % 4; |
| fsl->data_len = tran_len + cmd_len; |
| fsl_spi_cs_activate(slave, cs); |
| |
| /* Clear all eSPI events */ |
| out_be32(&espi->event , 0xffffffff); |
| /* handle data in 32-bit chunks */ |
| while (num_blks) { |
| event = in_be32(&espi->event); |
| if (event & ESPI_EV_TNF) { |
| fsl_espi_tx(fsl, dout); |
| /* Set up the next iteration */ |
| if (len > 4) { |
| len -= 4; |
| dout += 4; |
| } |
| } |
| |
| event = in_be32(&espi->event); |
| if (event & ESPI_EV_RNE) { |
| rf_cnt = ((event & ESPI_EV_RFCNT_MASK) |
| >> ESPI_EV_RFCNT_SHIFT); |
| if (rf_cnt >= 4) |
| rx_bytes = 4; |
| else if (num_blks == 1 && rf_cnt == num_bytes) |
| rx_bytes = num_bytes; |
| else |
| continue; |
| if (fsl_espi_rx(fsl, din, rx_bytes) |
| == rx_bytes) { |
| num_blks--; |
| if (din) |
| din = (unsigned char *)din |
| + rx_bytes; |
| } |
| } |
| } |
| if (data_in) { |
| memcpy(data_in, buffer + 2 * cmd_len, tran_len); |
| if (*buffer == 0x0b) { |
| data_in += tran_len; |
| data_len -= tran_len; |
| *(int *)buffer += tran_len; |
| } |
| } |
| fsl_spi_cs_deactivate(slave); |
| } |
| |
| free(buffer); |
| return 0; |
| } |
| |
| void espi_claim_bus(struct fsl_spi_slave *fsl, unsigned int cs) |
| { |
| ccsr_espi_t *espi = fsl->espi; |
| unsigned char pm = fsl->pm; |
| unsigned int mode = fsl->mode; |
| unsigned int div16 = fsl->div16; |
| int i; |
| |
| /* Enable eSPI interface */ |
| out_be32(&espi->mode, ESPI_MODE_RXTHR(3) |
| | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); |
| |
| out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ |
| out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ |
| |
| /* Init CS mode interface */ |
| for (i = 0; i < ESPI_MAX_CS_NUM; i++) |
| out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); |
| |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & |
| ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 |
| | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK |
| | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); |
| |
| /* Set eSPI BRG clock source */ |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| | ESPI_CSMODE_PM(pm) | div16); |
| |
| /* Set eSPI mode */ |
| if (mode & SPI_CPHA) |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| | ESPI_CSMODE_CP_BEGIN_EDGCLK); |
| if (mode & SPI_CPOL) |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| | ESPI_CSMODE_CI_INACTIVEHIGH); |
| |
| /* Character bit order: msb first */ |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| | ESPI_CSMODE_REV_MSB_FIRST); |
| |
| /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ |
| out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| | ESPI_CSMODE_LEN(7)); |
| } |
| |
| void espi_setup_slave(struct fsl_spi_slave *fsl) |
| { |
| unsigned int max_hz; |
| sys_info_t sysinfo; |
| unsigned long spibrg = 0; |
| unsigned long spi_freq = 0; |
| unsigned char pm = 0; |
| |
| max_hz = fsl->speed_hz; |
| |
| get_sys_info(&sysinfo); |
| spibrg = sysinfo.freq_systembus / 2; |
| fsl->div16 = 0; |
| if ((spibrg / max_hz) > 32) { |
| fsl->div16 = ESPI_CSMODE_DIV16; |
| pm = spibrg / (max_hz * 16 * 2); |
| if (pm > 16) { |
| pm = 16; |
| debug("max_hz is too low: %d Hz, %ld Hz is used.\n", |
| max_hz, spibrg / (32 * 16)); |
| } |
| } else { |
| pm = spibrg / (max_hz * 2); |
| } |
| if (pm) |
| pm--; |
| fsl->pm = pm; |
| |
| if (fsl->div16) |
| spi_freq = spibrg / ((pm + 1) * 2 * 16); |
| else |
| spi_freq = spibrg / ((pm + 1) * 2); |
| |
| /* set tx_timeout to 10 times of one espi FIFO entry go out */ |
| fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * ESPI_FIFO_WIDTH_BIT |
| * 10), spi_freq);/* Set eSPI BRG clock source */ |
| } |
| |
| #if !CONFIG_IS_ENABLED(DM_SPI) |
| int spi_cs_is_valid(unsigned int bus, unsigned int cs) |
| { |
| return bus == 0 && cs < ESPI_MAX_CS_NUM; |
| } |
| |
| struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, |
| unsigned int max_hz, unsigned int mode) |
| { |
| struct fsl_spi_slave *fsl; |
| |
| if (!spi_cs_is_valid(bus, cs)) |
| return NULL; |
| |
| fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); |
| if (!fsl) |
| return NULL; |
| |
| fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| fsl->mode = mode; |
| fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; |
| fsl->speed_hz = max_hz; |
| |
| espi_setup_slave(fsl); |
| |
| return &fsl->slave; |
| } |
| |
| void spi_free_slave(struct spi_slave *slave) |
| { |
| struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| |
| free(fsl); |
| } |
| |
| int spi_claim_bus(struct spi_slave *slave) |
| { |
| struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| |
| espi_claim_bus(fsl, slave->cs); |
| |
| return 0; |
| } |
| |
| void spi_release_bus(struct spi_slave *slave) |
| { |
| struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| |
| espi_release_bus(fsl); |
| } |
| |
| int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, |
| void *din, unsigned long flags) |
| { |
| struct fsl_spi_slave *fsl = (struct fsl_spi_slave *)slave; |
| |
| return espi_xfer(fsl, slave->cs, bitlen, dout, din, flags); |
| } |
| #else |
| static void __espi_set_speed(struct fsl_spi_slave *fsl) |
| { |
| espi_setup_slave(fsl); |
| |
| /* Set eSPI BRG clock source */ |
| out_be32(&fsl->espi->csmode[fsl->cs], |
| in_be32(&fsl->espi->csmode[fsl->cs]) |
| | ESPI_CSMODE_PM(fsl->pm) | fsl->div16); |
| } |
| |
| static void __espi_set_mode(struct fsl_spi_slave *fsl) |
| { |
| /* Set eSPI mode */ |
| if (fsl->mode & SPI_CPHA) |
| out_be32(&fsl->espi->csmode[fsl->cs], |
| in_be32(&fsl->espi->csmode[fsl->cs]) |
| | ESPI_CSMODE_CP_BEGIN_EDGCLK); |
| if (fsl->mode & SPI_CPOL) |
| out_be32(&fsl->espi->csmode[fsl->cs], |
| in_be32(&fsl->espi->csmode[fsl->cs]) |
| | ESPI_CSMODE_CI_INACTIVEHIGH); |
| } |
| |
| static int fsl_espi_claim_bus(struct udevice *dev) |
| { |
| struct udevice *bus = dev->parent; |
| struct fsl_spi_slave *fsl = dev_get_priv(bus); |
| |
| espi_claim_bus(fsl, fsl->cs); |
| |
| return 0; |
| } |
| |
| static int fsl_espi_release_bus(struct udevice *dev) |
| { |
| struct udevice *bus = dev->parent; |
| struct fsl_spi_slave *fsl = dev_get_priv(bus); |
| |
| espi_release_bus(fsl); |
| |
| return 0; |
| } |
| |
| static int fsl_espi_xfer(struct udevice *dev, unsigned int bitlen, |
| const void *dout, void *din, unsigned long flags) |
| { |
| struct udevice *bus = dev->parent; |
| struct fsl_spi_slave *fsl = dev_get_priv(bus); |
| |
| return espi_xfer(fsl, fsl->cs, bitlen, dout, din, flags); |
| } |
| |
| static int fsl_espi_set_speed(struct udevice *bus, uint speed) |
| { |
| struct fsl_spi_slave *fsl = dev_get_priv(bus); |
| |
| debug("%s speed %u\n", __func__, speed); |
| fsl->speed_hz = speed; |
| |
| __espi_set_speed(fsl); |
| |
| return 0; |
| } |
| |
| static int fsl_espi_set_mode(struct udevice *bus, uint mode) |
| { |
| struct fsl_spi_slave *fsl = dev_get_priv(bus); |
| |
| debug("%s mode %u\n", __func__, mode); |
| fsl->mode = mode; |
| |
| __espi_set_mode(fsl); |
| |
| return 0; |
| } |
| |
| static int fsl_espi_child_pre_probe(struct udevice *dev) |
| { |
| struct dm_spi_slave_plat *slave_plat = dev_get_parent_plat(dev); |
| struct udevice *bus = dev->parent; |
| struct fsl_spi_slave *fsl = dev_get_priv(bus); |
| |
| debug("%s cs %u\n", __func__, slave_plat->cs); |
| fsl->cs = slave_plat->cs; |
| |
| return 0; |
| } |
| |
| static int fsl_espi_probe(struct udevice *bus) |
| { |
| struct fsl_espi_plat *plat = dev_get_plat(bus); |
| struct fsl_spi_slave *fsl = dev_get_priv(bus); |
| |
| fsl->espi = (ccsr_espi_t *)((u32)plat->regs_addr); |
| fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; |
| fsl->speed_hz = plat->speed_hz; |
| |
| debug("%s probe done, bus-num %d.\n", bus->name, bus->seq); |
| |
| return 0; |
| } |
| |
| static const struct dm_spi_ops fsl_espi_ops = { |
| .claim_bus = fsl_espi_claim_bus, |
| .release_bus = fsl_espi_release_bus, |
| .xfer = fsl_espi_xfer, |
| .set_speed = fsl_espi_set_speed, |
| .set_mode = fsl_espi_set_mode, |
| }; |
| |
| #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) |
| static int fsl_espi_of_to_plat(struct udevice *bus) |
| { |
| fdt_addr_t addr; |
| struct fsl_espi_plat *plat = bus->plat; |
| const void *blob = gd->fdt_blob; |
| int node = dev_of_offset(bus); |
| |
| addr = dev_read_addr(bus); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| plat->regs_addr = lower_32_bits(addr); |
| plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency", |
| FSL_ESPI_DEFAULT_SCK_FREQ); |
| |
| debug("ESPI: regs=%p, max-frequency=%d\n", |
| &plat->regs_addr, plat->speed_hz); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id fsl_espi_ids[] = { |
| { .compatible = "fsl,mpc8536-espi" }, |
| { } |
| }; |
| #endif |
| |
| U_BOOT_DRIVER(fsl_espi) = { |
| .name = "fsl_espi", |
| .id = UCLASS_SPI, |
| #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) |
| .of_match = fsl_espi_ids, |
| .of_to_plat = fsl_espi_of_to_plat, |
| #endif |
| .ops = &fsl_espi_ops, |
| .plat_auto = sizeof(struct fsl_espi_plat), |
| .priv_auto = sizeof(struct fsl_spi_slave), |
| .probe = fsl_espi_probe, |
| .child_pre_probe = fsl_espi_child_pre_probe, |
| }; |
| #endif |