blob: 6622eeea9814ddc5ef5972607647541f2f11f094 [file] [log] [blame]
/*
*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <asm/immap.h>
#include <asm/rtc.h>
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
scm1->mpr = 0x77777777;
scm1->pacra = 0;
scm1->pacrb = 0;
scm1->pacrc = 0;
scm1->pacrd = 0;
scm1->pacre = 0;
scm1->pacrf = 0;
scm1->pacrg = 0;
/* FlexBus */
gpio->par_be =
GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | GPIO_PAR_BE_BE1_BE1 |
GPIO_PAR_BE_BE0_BE0;
gpio->par_fbctl =
GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | GPIO_PAR_FBCTL_RW_RW |
GPIO_PAR_FBCTL_TS_TS;
#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
fbcs->csar0 = CFG_CS0_BASE;
fbcs->cscr0 = CFG_CS0_CTRL;
fbcs->csmr0 = CFG_CS0_MASK;
#endif
#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
/* Latch chipselect */
fbcs->csar1 = CFG_CS1_BASE;
fbcs->cscr1 = CFG_CS1_CTRL;
fbcs->csmr1 = CFG_CS1_MASK;
#endif
#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
fbcs->csar2 = CFG_CS2_BASE;
fbcs->cscr2 = CFG_CS2_CTRL;
fbcs->csmr2 = CFG_CS2_MASK;
#endif
#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
fbcs->csar3 = CFG_CS3_BASE;
fbcs->cscr3 = CFG_CS3_CTRL;
fbcs->csmr3 = CFG_CS3_MASK;
#endif
#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
fbcs->csar4 = CFG_CS4_BASE;
fbcs->cscr4 = CFG_CS4_CTRL;
fbcs->csmr4 = CFG_CS4_MASK;
#endif
#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
fbcs->csar5 = CFG_CS5_BASE;
fbcs->cscr5 = CFG_CS5_CTRL;
fbcs->csmr5 = CFG_CS5_MASK;
#endif
#ifdef CONFIG_FSL_I2C
gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA;
#endif
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
#ifdef CONFIG_MCFTMR
volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE);
volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended;
u32 oscillator = CFG_RTC_OSCILLATOR;
rtcex->gocu = (CFG_RTC_OSCILLATOR >> 16) & 0xFFFF;
rtcex->gocl = CFG_RTC_OSCILLATOR & 0xFFFF;
#endif
return (0);
}
void uart_port_conf(void)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (CFG_UART_PORT) {
case 0:
gpio->par_uart =
(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
break;
case 1:
gpio->par_uart =
(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
break;
}
}