| /* |
| * Marvell PHY drivers |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| * author Andy Fleming |
| * |
| */ |
| #include <config.h> |
| #include <common.h> |
| #include <phy.h> |
| |
| #define PHY_AUTONEGOTIATE_TIMEOUT 5000 |
| |
| /* 88E1011 PHY Status Register */ |
| #define MIIM_88E1xxx_PHY_STATUS 0x11 |
| #define MIIM_88E1xxx_PHYSTAT_SPEED 0xc000 |
| #define MIIM_88E1xxx_PHYSTAT_GBIT 0x8000 |
| #define MIIM_88E1xxx_PHYSTAT_100 0x4000 |
| #define MIIM_88E1xxx_PHYSTAT_DUPLEX 0x2000 |
| #define MIIM_88E1xxx_PHYSTAT_SPDDONE 0x0800 |
| #define MIIM_88E1xxx_PHYSTAT_LINK 0x0400 |
| |
| #define MIIM_88E1xxx_PHY_SCR 0x10 |
| #define MIIM_88E1xxx_PHY_MDI_X_AUTO 0x0060 |
| |
| /* 88E1111 PHY LED Control Register */ |
| #define MIIM_88E1111_PHY_LED_CONTROL 24 |
| #define MIIM_88E1111_PHY_LED_DIRECT 0x4100 |
| #define MIIM_88E1111_PHY_LED_COMBINE 0x411C |
| |
| /* 88E1111 Extended PHY Specific Control Register */ |
| #define MIIM_88E1111_PHY_EXT_CR 0x14 |
| #define MIIM_88E1111_RX_DELAY 0x80 |
| #define MIIM_88E1111_TX_DELAY 0x2 |
| |
| /* 88E1111 Extended PHY Specific Status Register */ |
| #define MIIM_88E1111_PHY_EXT_SR 0x1b |
| #define MIIM_88E1111_HWCFG_MODE_MASK 0xf |
| #define MIIM_88E1111_HWCFG_MODE_COPPER_RGMII 0xb |
| #define MIIM_88E1111_HWCFG_MODE_FIBER_RGMII 0x3 |
| #define MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK 0x4 |
| #define MIIM_88E1111_HWCFG_MODE_COPPER_RTBI 0x9 |
| #define MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO 0x8000 |
| #define MIIM_88E1111_HWCFG_FIBER_COPPER_RES 0x2000 |
| |
| #define MIIM_88E1111_COPPER 0 |
| #define MIIM_88E1111_FIBER 1 |
| |
| /* 88E1118 PHY defines */ |
| #define MIIM_88E1118_PHY_PAGE 22 |
| #define MIIM_88E1118_PHY_LED_PAGE 3 |
| |
| /* 88E1121 PHY LED Control Register */ |
| #define MIIM_88E1121_PHY_LED_CTRL 16 |
| #define MIIM_88E1121_PHY_LED_PAGE 3 |
| #define MIIM_88E1121_PHY_LED_DEF 0x0030 |
| |
| /* 88E1121 PHY IRQ Enable/Status Register */ |
| #define MIIM_88E1121_PHY_IRQ_EN 18 |
| #define MIIM_88E1121_PHY_IRQ_STATUS 19 |
| |
| #define MIIM_88E1121_PHY_PAGE 22 |
| |
| /* 88E1145 Extended PHY Specific Control Register */ |
| #define MIIM_88E1145_PHY_EXT_CR 20 |
| #define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 |
| #define MIIM_M88E1145_RGMII_TX_DELAY 0x0002 |
| |
| #define MIIM_88E1145_PHY_LED_CONTROL 24 |
| #define MIIM_88E1145_PHY_LED_DIRECT 0x4100 |
| |
| #define MIIM_88E1145_PHY_PAGE 29 |
| #define MIIM_88E1145_PHY_CAL_OV 30 |
| |
| #define MIIM_88E1149_PHY_PAGE 29 |
| |
| /* Marvell 88E1011S */ |
| static int m88e1011s_config(struct phy_device *phydev) |
| { |
| /* Reset and configure the PHY */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| |
| genphy_config_aneg(phydev); |
| |
| return 0; |
| } |
| |
| /* Parse the 88E1011's status register for speed and duplex |
| * information |
| */ |
| static uint m88e1xxx_parse_status(struct phy_device *phydev) |
| { |
| unsigned int speed; |
| unsigned int mii_reg; |
| |
| mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_STATUS); |
| |
| if ((mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) && |
| !(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) { |
| int i = 0; |
| |
| puts("Waiting for PHY realtime link"); |
| while (!(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) { |
| /* Timeout reached ? */ |
| if (i > PHY_AUTONEGOTIATE_TIMEOUT) { |
| puts(" TIMEOUT !\n"); |
| phydev->link = 0; |
| break; |
| } |
| |
| if ((i++ % 1000) == 0) |
| putc('.'); |
| udelay(1000); |
| mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, |
| MIIM_88E1xxx_PHY_STATUS); |
| } |
| puts(" done\n"); |
| udelay(500000); /* another 500 ms (results in faster booting) */ |
| } else { |
| if (mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) |
| phydev->link = 1; |
| else |
| phydev->link = 0; |
| } |
| |
| if (mii_reg & MIIM_88E1xxx_PHYSTAT_DUPLEX) |
| phydev->duplex = DUPLEX_FULL; |
| else |
| phydev->duplex = DUPLEX_HALF; |
| |
| speed = mii_reg & MIIM_88E1xxx_PHYSTAT_SPEED; |
| |
| switch (speed) { |
| case MIIM_88E1xxx_PHYSTAT_GBIT: |
| phydev->speed = SPEED_1000; |
| break; |
| case MIIM_88E1xxx_PHYSTAT_100: |
| phydev->speed = SPEED_100; |
| break; |
| default: |
| phydev->speed = SPEED_10; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int m88e1011s_startup(struct phy_device *phydev) |
| { |
| genphy_update_link(phydev); |
| m88e1xxx_parse_status(phydev); |
| |
| return 0; |
| } |
| |
| /* Marvell 88E1111S */ |
| static int m88e1111s_config(struct phy_device *phydev) |
| { |
| int reg; |
| int timeout; |
| |
| if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || |
| (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || |
| (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || |
| (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { |
| reg = phy_read(phydev, |
| MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR); |
| if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || |
| (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)) { |
| reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY); |
| } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { |
| reg &= ~MIIM_88E1111_TX_DELAY; |
| reg |= MIIM_88E1111_RX_DELAY; |
| } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
| reg &= ~MIIM_88E1111_RX_DELAY; |
| reg |= MIIM_88E1111_TX_DELAY; |
| } |
| |
| phy_write(phydev, |
| MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR, reg); |
| |
| reg = phy_read(phydev, |
| MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR); |
| |
| reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK); |
| |
| if (reg & MIIM_88E1111_HWCFG_FIBER_COPPER_RES) |
| reg |= MIIM_88E1111_HWCFG_MODE_FIBER_RGMII; |
| else |
| reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RGMII; |
| |
| phy_write(phydev, |
| MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR, reg); |
| } |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { |
| reg = phy_read(phydev, |
| MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR); |
| |
| reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK); |
| reg |= MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK; |
| reg |= MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MIIM_88E1111_PHY_EXT_SR, reg); |
| } |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RTBI) { |
| reg = phy_read(phydev, |
| MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR); |
| reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY); |
| phy_write(phydev, |
| MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR, reg); |
| |
| reg = phy_read(phydev, MDIO_DEVAD_NONE, |
| MIIM_88E1111_PHY_EXT_SR); |
| reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK | |
| MIIM_88E1111_HWCFG_FIBER_COPPER_RES); |
| reg |= 0x7 | MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MIIM_88E1111_PHY_EXT_SR, reg); |
| |
| /* soft reset */ |
| timeout = 1000; |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| udelay(1000); |
| reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| while ((reg & BMCR_RESET) && --timeout) { |
| udelay(1000); |
| reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| } |
| if (!timeout) |
| printf("%s: phy soft reset timeout\n", __func__); |
| |
| reg = phy_read(phydev, MDIO_DEVAD_NONE, |
| MIIM_88E1111_PHY_EXT_SR); |
| reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK | |
| MIIM_88E1111_HWCFG_FIBER_COPPER_RES); |
| reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RTBI | |
| MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MIIM_88E1111_PHY_EXT_SR, reg); |
| } |
| |
| /* soft reset */ |
| timeout = 1000; |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| udelay(1000); |
| reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| while ((reg & BMCR_RESET) && --timeout) { |
| udelay(1000); |
| reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| } |
| if (!timeout) |
| printf("%s: phy soft reset timeout\n", __func__); |
| |
| genphy_config_aneg(phydev); |
| |
| phy_reset(phydev); |
| |
| return 0; |
| } |
| |
| /* Marvell 88E1118 */ |
| static int m88e1118_config(struct phy_device *phydev) |
| { |
| /* Change Page Number */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0002); |
| /* Delay RGMII TX and RX */ |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x1070); |
| /* Change Page Number */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0003); |
| /* Adjust LED control */ |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x021e); |
| /* Change Page Number */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); |
| |
| genphy_config_aneg(phydev); |
| |
| phy_reset(phydev); |
| |
| return 0; |
| } |
| |
| static int m88e1118_startup(struct phy_device *phydev) |
| { |
| /* Change Page Number */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); |
| |
| genphy_update_link(phydev); |
| m88e1xxx_parse_status(phydev); |
| |
| return 0; |
| } |
| |
| /* Marvell 88E1121R */ |
| static int m88e1121_config(struct phy_device *phydev) |
| { |
| int pg; |
| |
| /* Configure the PHY */ |
| genphy_config_aneg(phydev); |
| |
| /* Switch the page to access the led register */ |
| pg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE); |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, |
| MIIM_88E1121_PHY_LED_PAGE); |
| /* Configure leds */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_LED_CTRL, |
| MIIM_88E1121_PHY_LED_DEF); |
| /* Restore the page pointer */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, pg); |
| |
| /* Disable IRQs and de-assert interrupt */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_EN, 0); |
| phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_STATUS); |
| |
| return 0; |
| } |
| |
| /* Marvell 88E1145 */ |
| static int m88e1145_config(struct phy_device *phydev) |
| { |
| int reg; |
| |
| /* Errata E0, E1 */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x001b); |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0x418f); |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x0016); |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0xa2da); |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_SCR, |
| MIIM_88E1xxx_PHY_MDI_X_AUTO); |
| |
| reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR); |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) |
| reg |= MIIM_M88E1145_RGMII_RX_DELAY | |
| MIIM_M88E1145_RGMII_TX_DELAY; |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR, reg); |
| |
| genphy_config_aneg(phydev); |
| |
| phy_reset(phydev); |
| |
| return 0; |
| } |
| |
| static int m88e1145_startup(struct phy_device *phydev) |
| { |
| genphy_update_link(phydev); |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_LED_CONTROL, |
| MIIM_88E1145_PHY_LED_DIRECT); |
| m88e1xxx_parse_status(phydev); |
| |
| return 0; |
| } |
| |
| /* Marvell 88E1149S */ |
| static int m88e1149_config(struct phy_device *phydev) |
| { |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x1f); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c); |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x5); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x0); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); |
| |
| genphy_config_aneg(phydev); |
| |
| phy_reset(phydev); |
| |
| return 0; |
| } |
| |
| |
| static struct phy_driver M88E1011S_driver = { |
| .name = "Marvell 88E1011S", |
| .uid = 0x1410c60, |
| .mask = 0xffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &m88e1011s_config, |
| .startup = &m88e1011s_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver M88E1111S_driver = { |
| .name = "Marvell 88E1111S", |
| .uid = 0x1410cc0, |
| .mask = 0xffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &m88e1111s_config, |
| .startup = &m88e1011s_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver M88E1118_driver = { |
| .name = "Marvell 88E1118", |
| .uid = 0x1410e10, |
| .mask = 0xffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &m88e1118_config, |
| .startup = &m88e1118_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver M88E1118R_driver = { |
| .name = "Marvell 88E1118R", |
| .uid = 0x1410e40, |
| .mask = 0xffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &m88e1118_config, |
| .startup = &m88e1118_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver M88E1121R_driver = { |
| .name = "Marvell 88E1121R", |
| .uid = 0x1410cb0, |
| .mask = 0xffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &m88e1121_config, |
| .startup = &genphy_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver M88E1145_driver = { |
| .name = "Marvell 88E1145", |
| .uid = 0x1410cd0, |
| .mask = 0xffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &m88e1145_config, |
| .startup = &m88e1145_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver M88E1149S_driver = { |
| .name = "Marvell 88E1149S", |
| .uid = 0x1410ca0, |
| .mask = 0xffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &m88e1149_config, |
| .startup = &m88e1011s_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver M88E1518_driver = { |
| .name = "Marvell 88E1518", |
| .uid = 0x1410dd1, |
| .mask = 0xffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &m88e1111s_config, |
| .startup = &m88e1011s_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| int phy_marvell_init(void) |
| { |
| phy_register(&M88E1149S_driver); |
| phy_register(&M88E1145_driver); |
| phy_register(&M88E1121R_driver); |
| phy_register(&M88E1118_driver); |
| phy_register(&M88E1118R_driver); |
| phy_register(&M88E1111S_driver); |
| phy_register(&M88E1011S_driver); |
| phy_register(&M88E1518_driver); |
| |
| return 0; |
| } |