blob: 22da74679d285bb6bde15f8800bb54f07c066e38 [file] [log] [blame]
/* PCI.c - PCI functions */
/* Copyright - Galileo technology. */
#include <common.h>
#include <pci.h>
#include <galileo/pci.h>
static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
#ifdef CONFIG_ZUMA_V2
{0,0,0,0,0,0,0,29, [8 ... PCI_MAX_DEVICES-1]=0},
{0,0,0,0,0,0,0,28, [8 ... PCI_MAX_DEVICES-1]=0}
#else /* EVB??? This is a guess */
{0,0,0,0,0,0,0,27,27, [9 ... PCI_MAX_DEVICES-1]=0},
{0,0,0,0,0,0,0,29,29, [9 ... PCI_MAX_DEVICES-1]=0}
#endif
};
static const unsigned int pci_p2p_configuration_reg[]={
PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION};
static const unsigned int pci_configuration_address[]={
PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS};
static const unsigned int pci_configuration_data[]={
PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER};
static const unsigned int pci_error_cause_reg[]={
PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE};
static const unsigned int pci_arbiter_control[]={
PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL};
static const unsigned int pci_snoop_control_base_0_low[]={
PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW};
static const unsigned int pci_snoop_control_top_0[]={
PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0};
static const unsigned int pci_access_control_base_0_low[]={
PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW};
static const unsigned int pci_access_control_top_0[]={
PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0};
static const unsigned int pci_scs_bank_size[2][4] = {
{PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
{PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}};
static const unsigned int pci_p2p_configuration[] = {
PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION};
static unsigned int local_buses[] = { 0, 0};
/********************************************************************
* pciWriteConfigReg - Write to a PCI configuration register
* - Make sure the GT is configured as a master before writing
* to another device on the PCI.
* - The function takes care of Big/Little endian conversion.
*
*
* Inputs: unsigned int regOffset: The register offset as it apears in the GT spec
* (or any other PCI device spec)
* pciDevNum: The device number needs to be addressed.
*
* Configuration Address 0xCF8:
*
* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
* |congif|Reserved| Bus |Device|Function|Register|00|
* |Enable| |Number|Number| Number | Number | | <=field Name
*
*********************************************************************/
void pciWriteConfigReg(PCI_HOST host, unsigned int regOffset,unsigned int pciDevNum,unsigned int data)
{
volatile unsigned int DataForAddrReg;
unsigned int functionNum;
unsigned int busNum = PCI_BUS(pciDevNum);
unsigned int addr;
if(pciDevNum > 32) /* illegal device Number */
return;
if(pciDevNum == SELF) /* configure our configuration space. */
{
pciDevNum = (GTREGREAD(pci_p2p_configuration_reg[host]) >> 24) & 0x1f;
busNum = GTREGREAD(pci_p2p_configuration_reg[host]) & 0xff0000;
}
functionNum = regOffset & 0x00000700;
pciDevNum = pciDevNum << 11;
regOffset = regOffset & 0xfc;
DataForAddrReg = ( regOffset | pciDevNum | functionNum | busNum) | BIT31;
GT_REG_WRITE(pci_configuration_address[host],DataForAddrReg);
GT_REG_READ(pci_configuration_address[host], &addr);
if (addr != DataForAddrReg) return;
GT_REG_WRITE(pci_configuration_data[host],data);
}
/********************************************************************
* pciReadConfigReg - Read from a PCI0 configuration register
* - Make sure the GT is configured as a master before reading
* from another device on the PCI.
* - The function takes care of Big/Little endian conversion.
* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
* spec)
* pciDevNum: The device number needs to be addressed.
* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
* cause register to make sure the data is valid
*
* Configuration Address 0xCF8:
*
* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
* |congif|Reserved| Bus |Device|Function|Register|00|
* |Enable| |Number|Number| Number | Number | | <=field Name
*
*********************************************************************/
unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,unsigned int pciDevNum)
{
volatile unsigned int DataForAddrReg;
unsigned int data;
unsigned int functionNum;
unsigned int busNum = PCI_BUS(pciDevNum);
if(pciDevNum > 32) /* illegal device Number */
return 0xffffffff;
if(pciDevNum == SELF) /* configure our configuration space. */
{
pciDevNum = (GTREGREAD(pci_p2p_configuration_reg[host]) >> 24) & 0x1f;
busNum = GTREGREAD(pci_p2p_configuration_reg[host]) & 0xff0000;
}
functionNum = regOffset & 0x00000700;
pciDevNum = pciDevNum << 11;
regOffset = regOffset & 0xfc;
DataForAddrReg = (regOffset | pciDevNum | functionNum | busNum) | BIT31 ;
GT_REG_WRITE(pci_configuration_address[host],DataForAddrReg);
GT_REG_READ(pci_configuration_address[host], &data);
if (data != DataForAddrReg)
return 0xffffffff;
GT_REG_READ(pci_configuration_data[host], &data);
return data;
}
/********************************************************************
* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
* the agent is placed on another Bus. For more
* information read P2P in the PCI spec.
*
* Inputs: unsigned int regOffset - The register offset as it apears in the
* GT spec (or any other PCI device spec).
* unsigned int pciDevNum - The device number needs to be addressed.
* unsigned int busNum - On which bus does the Target agent connect
* to.
* unsigned int data - data to be written.
*
* Configuration Address 0xCF8:
*
* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
* |congif|Reserved| Bus |Device|Function|Register|01|
* |Enable| |Number|Number| Number | Number | | <=field Name
*
* The configuration Address is configure as type-I (bits[1:0] = '01') due to
* PCI spec referring to P2P.
*
*********************************************************************/
void pciOverBridgeWriteConfigReg(PCI_HOST host,
unsigned int regOffset,
unsigned int pciDevNum,
unsigned int busNum,unsigned int data)
{
unsigned int DataForReg;
unsigned int functionNum;
functionNum = regOffset & 0x00000700;
pciDevNum = pciDevNum << 11;
regOffset = regOffset & 0xff;
busNum = busNum << 16;
if(pciDevNum == SELF) /* This board */
{
DataForReg = ( regOffset | pciDevNum | functionNum) | BIT0;
}
else
{
DataForReg = ( regOffset | pciDevNum | functionNum | busNum) |
BIT31 | BIT0;
}
GT_REG_WRITE(pci_configuration_address[host],DataForReg);
if(pciDevNum == SELF) /* This board */
{
GT_REG_WRITE(pci_configuration_data[host],data);
}
else /* configuration Transaction over the pci. */
{
/* The PCI is working in LE Mode So it swap the Data. */
GT_REG_WRITE(pci_configuration_data[host],WORD_SWAP(data));
}
}
/********************************************************************
* pciOverBridgeReadConfigReg - Read from a PCIn configuration register where
* the agent target locate on another PCI bus.
* - Make sure the GT is configured as a master
* before reading from another device on the PCI.
* - The function takes care of Big/Little endian
* conversion.
* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
* spec). (configuration register offset.)
* pciDevNum: The device number needs to be addressed.
* busNum: the Bus number where the agent is place.
* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
* cause register to make sure the data is valid
*
* Configuration Address 0xCF8:
*
* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
* |congif|Reserved| Bus |Device|Function|Register|01|
* |Enable| |Number|Number| Number | Number | | <=field Name
*
*********************************************************************/
unsigned int pciOverBridgeReadConfigReg(PCI_HOST host,
unsigned int regOffset,
unsigned int pciDevNum,
unsigned int busNum)
{
unsigned int DataForReg;
unsigned int data;
unsigned int functionNum;
functionNum = regOffset & 0x00000700;
pciDevNum = pciDevNum << 11;
regOffset = regOffset & 0xff;
busNum = busNum << 16;
if (pciDevNum == SELF) /* This board */
{
DataForReg = (regOffset | pciDevNum | functionNum) | BIT31 ;
}
else /* agent on another bus */
{
DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
BIT0 | BIT31 ;
}
GT_REG_WRITE(pci_configuration_address[host],DataForReg);
if (pciDevNum == SELF) /* This board */
{
GT_REG_READ(pci_configuration_data[host], &data);
return data;
}
else /* The PCI is working in LE Mode So it swap the Data. */
{
GT_REG_READ(pci_configuration_data[host], &data);
return WORD_SWAP(data);
}
}
/********************************************************************
* pciGetRegOffset - Gets the register offset for this region config.
*
* INPUT: Bus, Region - The bus and region we ask for its base address.
* OUTPUT: N/A
* RETURNS: PCI register base address
*********************************************************************/
static unsigned int pciGetRegOffset(PCI_HOST host, PCI_REGION region)
{
switch (host)
{
case PCI_HOST0:
switch(region) {
case PCI_IO: return PCI_0I_O_LOW_DECODE_ADDRESS;
case PCI_REGION0: return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
case PCI_REGION1: return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
case PCI_REGION2: return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
case PCI_REGION3: return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
}
case PCI_HOST1:
switch(region) {
case PCI_IO: return PCI_1I_O_LOW_DECODE_ADDRESS;
case PCI_REGION0: return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
case PCI_REGION1: return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
case PCI_REGION2: return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
case PCI_REGION3: return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
}
}
return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
}
static unsigned int pciGetRemapOffset(PCI_HOST host, PCI_REGION region)
{
switch (host)
{
case PCI_HOST0:
switch(region) {
case PCI_IO: return PCI_0I_O_ADDRESS_REMAP;
case PCI_REGION0: return PCI_0MEMORY0_ADDRESS_REMAP;
case PCI_REGION1: return PCI_0MEMORY1_ADDRESS_REMAP;
case PCI_REGION2: return PCI_0MEMORY2_ADDRESS_REMAP;
case PCI_REGION3: return PCI_0MEMORY3_ADDRESS_REMAP;
}
case PCI_HOST1:
switch(region) {
case PCI_IO: return PCI_1I_O_ADDRESS_REMAP;
case PCI_REGION0: return PCI_1MEMORY0_ADDRESS_REMAP;
case PCI_REGION1: return PCI_1MEMORY1_ADDRESS_REMAP;
case PCI_REGION2: return PCI_1MEMORY2_ADDRESS_REMAP;
case PCI_REGION3: return PCI_1MEMORY3_ADDRESS_REMAP;
}
}
return PCI_0MEMORY0_ADDRESS_REMAP;
}
bool pciMapSpace(PCI_HOST host, PCI_REGION region, unsigned int remapBase, unsigned int bankBase,unsigned int bankLength)
{
unsigned int low=0xfff;
unsigned int high=0x0;
unsigned int regOffset=pciGetRegOffset(host, region);
unsigned int remapOffset=pciGetRemapOffset(host, region);
if(bankLength!=0) {
low = (bankBase >> 20) & 0xfff;
high=((bankBase+bankLength)>>20)-1;
}
GT_REG_WRITE(regOffset, low | (1<<24)); /* no swapping */
GT_REG_WRITE(regOffset+8, high);
if(bankLength!=0) { /* must do AFTER writing maps */
GT_REG_WRITE(remapOffset, remapBase>>20); /* sorry, 32 bits only.
dont support upper 32
in this driver */
}
return true;
}
unsigned int pciGetSpaceBase(PCI_HOST host, PCI_REGION region)
{
unsigned int low;
unsigned int regOffset=pciGetRegOffset(host, region);
GT_REG_READ(regOffset,&low);
return (low&0xfff)<<20;
}
unsigned int pciGetSpaceSize(PCI_HOST host, PCI_REGION region)
{
unsigned int low,high;
unsigned int regOffset=pciGetRegOffset(host, region);
GT_REG_READ(regOffset,&low);
GT_REG_READ(regOffset+8,&high);
high&=0xfff;
low&=0xfff;
if(high<=low) return 0;
return (high+1-low)<<20;
}
/********************************************************************
* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
*
* Inputs: base and size of PCI SCS
*********************************************************************/
void pciMapMemoryBank(PCI_HOST host, MEMORY_BANK bank, unsigned int pciDramBase,unsigned int pciDramSize)
{
pciDramBase = pciDramBase & 0xfffff000;
pciDramBase = pciDramBase | (pciReadConfigReg(host,
PCI_SCS_0_BASE_ADDRESS + 4*bank,SELF) & 0x00000fff);
pciWriteConfigReg(host,PCI_SCS_0_BASE_ADDRESS + 4*bank,SELF,pciDramBase);
if(pciDramSize == 0)
pciDramSize ++;
GT_REG_WRITE(pci_scs_bank_size[host][bank], pciDramSize-1);
}
/********************************************************************
* pciSetRegionFeatures - This function modifys one of the 8 regions with
* feature bits given as an input.
* - Be advised to check the spec before modifying them.
* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
* unsigned int features - See file: pci.h there are defintion for those
* region features.
* unsigned int baseAddress - The region base Address.
* unsigned int topAddress - The region top Address.
* Returns: false if one of the parameters is erroneous true otherwise.
*********************************************************************/
bool pciSetRegionFeatures(PCI_HOST host, PCI_ACCESS_REGIONS region,unsigned int features,
unsigned int baseAddress,unsigned int regionLength)
{
unsigned int accessLow;
unsigned int accessHigh;
unsigned int accessTop = baseAddress + regionLength;
if(regionLength == 0) /* close the region. */
{
pciDisableAccessRegion(host, region);
return true;
}
/* base Address is store is bits [11:0] */
accessLow = (baseAddress & 0xfff00000) >> 20;
/* All the features are update according to the defines in pci.h (to be on
the safe side we disable bits: [11:0] */
accessLow = accessLow | (features & 0xfffff000);
/* write to the Low Access Region register */
GT_REG_WRITE( pci_access_control_base_0_low[host] + 0x10*region,accessLow);
accessHigh = (accessTop & 0xfff00000) >> 20;
/* write to the High Access Region register */
GT_REG_WRITE(pci_access_control_top_0[host] + 0x10*region,accessHigh - 1);
return true;
}
/********************************************************************
* pciDisableAccessRegion - Disable The given Region by writing MAX size
* to its low Address and MIN size to its high Address.
*
* Inputs: PCI_ACCESS_REGIONS region - The region we to be Disabled.
* Returns: N/A.
*********************************************************************/
void pciDisableAccessRegion(PCI_HOST host, PCI_ACCESS_REGIONS region)
{
/* writing back the registers default values. */
GT_REG_WRITE(pci_access_control_base_0_low[host] + 0x10*region,0x01001fff);
GT_REG_WRITE(pci_access_control_top_0[host] + 0x10*region,0);
}
/********************************************************************
* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
*
* Inputs: N/A
* Returns: true.
*********************************************************************/
bool pciArbiterEnable(PCI_HOST host)
{
unsigned int regData;
GT_REG_READ(pci_arbiter_control[host],&regData);
GT_REG_WRITE(pci_arbiter_control[host],regData | BIT31);
return true;
}
/********************************************************************
* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
*
* Inputs: N/A
* Returns: true
*********************************************************************/
bool pciArbiterDisable(PCI_HOST host)
{
unsigned int regData;
GT_REG_READ(pci_arbiter_control[host],&regData);
GT_REG_WRITE(pci_arbiter_control[host],regData & 0x7fffffff);
return true;
}
/********************************************************************
* pciParkingDisable - Park on last option disable, with this function you can
* disable the park on last mechanism for each agent.
* disabling this option for all agents results parking
* on the internal master.
*
* Inputs: PCI_AGENT_PARK internalAgent - parking Disable for internal agent.
* PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
* PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
* PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
* PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
* PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
* PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
* Returns: true
*********************************************************************/
bool pciParkingDisable(PCI_HOST host, PCI_AGENT_PARK internalAgent,
PCI_AGENT_PARK externalAgent0,
PCI_AGENT_PARK externalAgent1,
PCI_AGENT_PARK externalAgent2,
PCI_AGENT_PARK externalAgent3,
PCI_AGENT_PARK externalAgent4,
PCI_AGENT_PARK externalAgent5)
{
unsigned int regData;
unsigned int writeData;
GT_REG_READ(pci_arbiter_control[host],&regData);
writeData = (internalAgent << 14) + (externalAgent0 << 15) + \
(externalAgent1 << 16) + (externalAgent2 << 17) + \
(externalAgent3 << 18) + (externalAgent4 << 19) + \
(externalAgent5 << 20);
regData = (regData & ~(0x7f<<14)) | writeData;
GT_REG_WRITE(pci_arbiter_control[host],regData);
return true;
}
/********************************************************************
* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
* supports Cache Coherency in the PCI_n interface.
* Inputs: region - One of the four regions.
* snoopType - There is four optional Types:
* 1. No Snoop.
* 2. Snoop to WT region.
* 3. Snoop to WB region.
* 4. Snoop & Invalidate to WB region.
* baseAddress - Base Address of this region.
* regionLength - Region length.
* Returns: false if one of the parameters is wrong otherwise return true.
*********************************************************************/
bool pciSetRegionSnoopMode(PCI_HOST host, PCI_SNOOP_REGION region,PCI_SNOOP_TYPE snoopType,
unsigned int baseAddress,
unsigned int regionLength)
{
unsigned int snoopXbaseAddress;
unsigned int snoopXtopAddress;
unsigned int data;
unsigned int snoopHigh = baseAddress + regionLength;
if( (region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB) )
return false;
snoopXbaseAddress = pci_snoop_control_base_0_low[host] + 0x10 * region;
snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
if(regionLength == 0) /* closing the region */
{
GT_REG_WRITE(snoopXbaseAddress,0x0000ffff);
GT_REG_WRITE(snoopXtopAddress,0);
return true;
}
baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
data = (baseAddress >> 20) | snoopType << 12;
GT_REG_WRITE(snoopXbaseAddress,data);
snoopHigh = (snoopHigh & 0xfff00000) >> 20;
GT_REG_WRITE(snoopXtopAddress,snoopHigh - 1);
return true;
}
/*
*
*/
static int gt_read_config_dword(struct pci_controller *hose,
pci_dev_t dev,
int offset, u32* value)
{
int bus = PCI_BUS(dev);
if ((bus == local_buses[0]) || (bus == local_buses[1])){
*value = pciReadConfigReg((PCI_HOST) hose->cfg_addr, offset,
PCI_DEV(dev));
} else {
*value = pciOverBridgeReadConfigReg((PCI_HOST) hose->cfg_addr,
offset, PCI_DEV(dev), bus);
}
return 0;
}
static int gt_write_config_dword(struct pci_controller *hose,
pci_dev_t dev,
int offset, u32 value)
{
int bus = PCI_BUS(dev);
if ((bus == local_buses[0]) || (bus == local_buses[1])){
pciWriteConfigReg((PCI_HOST)hose->cfg_addr, offset,
PCI_DEV(dev), value);
} else {
pciOverBridgeWriteConfigReg((PCI_HOST)hose->cfg_addr, offset,
PCI_DEV(dev), value, bus);
}
return 0;
}
/*
*
*/
static void gt_setup_ide(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *entry)
{
static const int ide_bar[]={8,4,8,4,0,0};
u32 bar_response, bar_value;
int bar;
for (bar=0; bar<6; bar++)
{
pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar*4, 0x0);
pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar*4, &bar_response);
pciauto_region_allocate(bar_response & PCI_BASE_ADDRESS_SPACE_IO ?
hose->pci_io : hose->pci_mem, ide_bar[bar], &bar_value);
pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar*4, bar_value);
}
}
static void gt_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
{
unsigned char pin, irq;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if(pin == 1) { /* only allow INT A */
irq = pci_irq_swizzle[(PCI_HOST)hose->cfg_addr][PCI_DEV(dev)];
if(irq)
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
}
struct pci_config_table gt_config_table[] = {
{ PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
{ }
};
struct pci_controller pci0_hose = {
fixup_irq: gt_fixup_irq,
config_table: gt_config_table,
};
struct pci_controller pci1_hose = {
fixup_irq: gt_fixup_irq,
config_table: gt_config_table,
};
void
pci_init_board(void)
{
unsigned int command;
pci0_hose.first_busno = 0;
pci0_hose.last_busno = 0xff;
local_buses[0] = pci0_hose.first_busno;
/* PCI memory space */
pci_set_region(pci0_hose.regions + 0,
CFG_PCI0_0_MEM_SPACE,
CFG_PCI0_0_MEM_SPACE,
CFG_PCI0_MEM_SIZE,
PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region(pci0_hose.regions + 1,
CFG_PCI0_IO_SPACE_PCI,
CFG_PCI0_IO_SPACE,
CFG_PCI0_IO_SIZE,
PCI_REGION_IO);
pci_set_ops(&pci0_hose,
pci_hose_read_config_byte_via_dword,
pci_hose_read_config_word_via_dword,
gt_read_config_dword,
pci_hose_write_config_byte_via_dword,
pci_hose_write_config_word_via_dword,
gt_write_config_dword);
pci0_hose.region_count = 2;
pci0_hose.cfg_addr = (unsigned int*) PCI_HOST0;
pci_register_hose(&pci0_hose);
pciArbiterEnable(PCI_HOST0);
pciParkingDisable(PCI_HOST0,1,1,1,1,1,1,1);
command = pciReadConfigReg(PCI_HOST0, PCI_COMMAND, SELF);
command |= PCI_COMMAND_MASTER;
pciWriteConfigReg(PCI_HOST0, PCI_COMMAND, SELF, command);
pci0_hose.last_busno = pci_hose_scan(&pci0_hose);
command = pciReadConfigReg(PCI_HOST0, PCI_COMMAND, SELF);
command |= PCI_COMMAND_MEMORY;
pciWriteConfigReg(PCI_HOST0, PCI_COMMAND, SELF, command);
pci1_hose.first_busno = pci0_hose.last_busno + 1;
pci1_hose.last_busno = 0xff;
pci1_hose.current_busno = pci0_hose.current_busno;
local_buses[1] = pci1_hose.first_busno;
/* PCI memory space */
pci_set_region(pci1_hose.regions + 0,
CFG_PCI1_0_MEM_SPACE,
CFG_PCI1_0_MEM_SPACE,
CFG_PCI1_MEM_SIZE,
PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region(pci1_hose.regions + 1,
CFG_PCI1_IO_SPACE_PCI,
CFG_PCI1_IO_SPACE,
CFG_PCI1_IO_SIZE,
PCI_REGION_IO);
pci_set_ops(&pci1_hose,
pci_hose_read_config_byte_via_dword,
pci_hose_read_config_word_via_dword,
gt_read_config_dword,
pci_hose_write_config_byte_via_dword,
pci_hose_write_config_word_via_dword,
gt_write_config_dword);
pci1_hose.region_count = 2;
pci1_hose.cfg_addr = (unsigned int*) PCI_HOST1;
pci_register_hose(&pci1_hose);
pciArbiterEnable(PCI_HOST1);
pciParkingDisable(PCI_HOST1,1,1,1,1,1,1,1);
command = pciReadConfigReg(PCI_HOST1, PCI_COMMAND, SELF);
command |= PCI_COMMAND_MASTER;
pciWriteConfigReg(PCI_HOST1, PCI_COMMAND, SELF, command);
pci1_hose.last_busno = pci_hose_scan(&pci1_hose);
command = pciReadConfigReg(PCI_HOST1, PCI_COMMAND, SELF);
command |= PCI_COMMAND_MEMORY;
pciWriteConfigReg(PCI_HOST1, PCI_COMMAND, SELF, command);
}