| /*-----------------------------------------------------------------------------+ |
| * |
| * This source code has been made available to you by IBM on an AS-IS |
| * basis. Anyone receiving this source is licensed under IBM |
| * copyrights to use it in any way he or she deems fit, including |
| * copying it, modifying it, compiling it, and redistributing it either |
| * with or without modifications. No license under IBM patents or |
| * patent applications is to be implied by the copyright license. |
| * |
| * Any user of this software should understand that IBM cannot provide |
| * technical support for this software and will not be responsible for |
| * any consequences resulting from the use of this software. |
| * |
| * Any person who transfers this source code or any derivative work |
| * must include the IBM copyright notice, this paragraph, and the |
| * preceding two paragraphs in the transferred software. |
| * |
| * COPYRIGHT I B M CORPORATION 1995 |
| * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M |
| *-----------------------------------------------------------------------------*/ |
| /*----------------------------------------------------------------------------+ |
| * |
| * File Name: 405gp_pci.c |
| * |
| * Function: Initialization code for the 405GP PCI Configuration regs. |
| * |
| * Author: Mark Game |
| * |
| * Change Activity- |
| * |
| * Date Description of Change BY |
| * --------- --------------------- --- |
| * 09-Sep-98 Created MCG |
| * 02-Nov-98 Removed External arbiter selected message JWB |
| * 27-Nov-98 Zero out PTMBAR2 and disable in PTM2MS JWB |
| * 04-Jan-99 Zero out other unused PMM and PTM regs. Change bus scan MCG |
| * from (0 to n) to (1 to n). |
| * 17-May-99 Port to Walnut JWB |
| * 17-Jun-99 Updated for VGA support JWB |
| * 21-Jun-99 Updated to allow SRAM region to be a target from PCI bus JWB |
| * 19-Jul-99 Updated for 405GP pass 1 errata #26 (Low PCI subsequent MCG |
| * target latency timer values are not supported). |
| * Should be fixed in pass 2. |
| * 09-Sep-99 Removed use of PTM2 since the SRAM region no longer needs JWB |
| * to be a PCI target. Zero out PTMBAR2 and disable in PTM2MS. |
| * 10-Dec-99 Updated PCI_Write_CFG_Reg for pass2 errata #6 JWB |
| * 11-Jan-00 Ensure PMMxMAs disabled before setting PMMxLAs. This is not |
| * really required after a reset since PMMxMAs are already |
| * disabled but is a good practice nonetheless. JWB |
| * 12-Jun-01 stefan.roese@esd-electronics.com |
| * - PCI host/adapter handling reworked |
| * 09-Jul-01 stefan.roese@esd-electronics.com |
| * - PCI host now configures from device 0 (not 1) to max_dev, |
| * (host configures itself) |
| * - On CPCI-405 pci base address and size is generated from |
| * SDRAM and FLASH size (CFG regs not used anymore) |
| * - Some minor changes for CPCI-405-A (adapter version) |
| * 14-Sep-01 stefan.roese@esd-electronics.com |
| * - CONFIG_PCI_SCAN_SHOW added to print pci devices upon startup |
| * 28-Sep-01 stefan.roese@esd-electronics.com |
| * - Changed pci master configuration for linux compatibility |
| * (no need for bios_fixup() anymore) |
| * 26-Feb-02 stefan.roese@esd-electronics.com |
| * - Bug fixed in pci configuration (Andrew May) |
| * - Removed pci class code init for CPCI405 board |
| * 15-May-02 stefan.roese@esd-electronics.com |
| * - New vga device handling |
| * 29-May-02 stefan.roese@esd-electronics.com |
| * - PCI class code init added (if defined) |
| *----------------------------------------------------------------------------*/ |
| |
| #include <common.h> |
| #include <command.h> |
| #if !defined(CONFIG_440) |
| #include <405gp_pci.h> |
| #endif |
| #include <asm/processor.h> |
| #include <pci.h> |
| |
| #if defined(CONFIG_405GP) || defined(CONFIG_405EP) |
| |
| #ifdef CONFIG_PCI |
| |
| /*#define DEBUG*/ |
| |
| /*-----------------------------------------------------------------------------+ |
| * pci_init. Initializes the 405GP PCI Configuration regs. |
| *-----------------------------------------------------------------------------*/ |
| void pci_405gp_init(struct pci_controller *hose) |
| { |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int i, reg_num = 0; |
| bd_t *bd = gd->bd; |
| |
| unsigned short temp_short; |
| unsigned long ptmpcila[2] = {CFG_PCI_PTM1PCI, CFG_PCI_PTM2PCI}; |
| #if defined(CONFIG_CPCI405) |
| unsigned long ptmla[2] = {bd->bi_memstart, bd->bi_flashstart}; |
| unsigned long ptmms[2] = {~(bd->bi_memsize - 1) | 1, ~(bd->bi_flashsize - 1) | 1}; |
| #else |
| unsigned long ptmla[2] = {CFG_PCI_PTM1LA, CFG_PCI_PTM2LA}; |
| unsigned long ptmms[2] = {CFG_PCI_PTM1MS, CFG_PCI_PTM2MS}; |
| #endif |
| #if defined(CONFIG_PIP405) || defined (CONFIG_MIP405) |
| unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0}; |
| unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0}; |
| unsigned long pmmpcila[3] = {0x80000000, 0x00000000, 0}; |
| unsigned long pmmpciha[3] = {0x00000000, 0x00000000, 0}; |
| #else |
| unsigned long pmmla[3] = {0x80000000, 0,0}; |
| unsigned long pmmma[3] = {0xC0000001, 0,0}; |
| unsigned long pmmpcila[3] = {0x80000000, 0,0}; |
| unsigned long pmmpciha[3] = {0x00000000, 0,0}; |
| #endif |
| |
| /* |
| * Register the hose |
| */ |
| hose->first_busno = 0; |
| hose->last_busno = 0xff; |
| |
| /* ISA/PCI I/O space */ |
| pci_set_region(hose->regions + reg_num++, |
| MIN_PCI_PCI_IOADDR, |
| MIN_PLB_PCI_IOADDR, |
| 0x10000, |
| PCI_REGION_IO); |
| |
| /* PCI I/O space */ |
| pci_set_region(hose->regions + reg_num++, |
| 0x00800000, |
| 0xe8800000, |
| 0x03800000, |
| PCI_REGION_IO); |
| |
| reg_num = 2; |
| |
| /* Memory spaces */ |
| for (i=0; i<2; i++) |
| if (ptmms[i] & 1) |
| { |
| if (!i) hose->pci_fb = hose->regions + reg_num; |
| |
| pci_set_region(hose->regions + reg_num++, |
| ptmpcila[i], ptmla[i], |
| ~(ptmms[i] & 0xfffff000) + 1, |
| PCI_REGION_MEM | |
| PCI_REGION_MEMORY); |
| } |
| |
| /* PCI memory spaces */ |
| for (i=0; i<3; i++) |
| if (pmmma[i] & 1) |
| { |
| pci_set_region(hose->regions + reg_num++, |
| pmmpcila[i], pmmla[i], |
| ~(pmmma[i] & 0xfffff000) + 1, |
| PCI_REGION_MEM); |
| } |
| |
| hose->region_count = reg_num; |
| |
| pci_setup_indirect(hose, |
| PCICFGADR, |
| PCICFGDATA); |
| |
| if (hose->pci_fb) |
| pciauto_region_init(hose->pci_fb); |
| |
| pci_register_hose(hose); |
| |
| /*--------------------------------------------------------------------------+ |
| * 405GP PCI Master configuration. |
| * Map one 512 MB range of PLB/processor addresses to PCI memory space. |
| * PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF |
| * Use byte reversed out routines to handle endianess. |
| *--------------------------------------------------------------------------*/ |
| out32r(PMM0MA, (pmmma[0]&~0x1)); /* disable, configure PMMxLA, PMMxPCILA first */ |
| out32r(PMM0LA, pmmla[0]); |
| out32r(PMM0PCILA, pmmpcila[0]); |
| out32r(PMM0PCIHA, pmmpciha[0]); |
| out32r(PMM0MA, pmmma[0]); |
| |
| /*--------------------------------------------------------------------------+ |
| * PMM1 is not used. Initialize them to zero. |
| *--------------------------------------------------------------------------*/ |
| out32r(PMM1MA, (pmmma[1]&~0x1)); |
| out32r(PMM1LA, pmmla[1]); |
| out32r(PMM1PCILA, pmmpcila[1]); |
| out32r(PMM1PCIHA, pmmpciha[1]); |
| out32r(PMM1MA, pmmma[1]); |
| |
| /*--------------------------------------------------------------------------+ |
| * PMM2 is not used. Initialize them to zero. |
| *--------------------------------------------------------------------------*/ |
| out32r(PMM2MA, (pmmma[2]&~0x1)); |
| out32r(PMM2LA, pmmla[2]); |
| out32r(PMM2PCILA, pmmpcila[2]); |
| out32r(PMM2PCIHA, pmmpciha[2]); |
| out32r(PMM2MA, pmmma[2]); |
| |
| /*--------------------------------------------------------------------------+ |
| * 405GP PCI Target configuration. (PTM1) |
| * Note: PTM1MS is hardwire enabled but we set the enable bit anyway. |
| *--------------------------------------------------------------------------*/ |
| out32r(PTM1LA, ptmla[0]); /* insert address */ |
| out32r(PTM1MS, ptmms[0]); /* insert size, enable bit is 1 */ |
| |
| /*--------------------------------------------------------------------------+ |
| * 405GP PCI Target configuration. (PTM2) |
| *--------------------------------------------------------------------------*/ |
| out32r(PTM2LA, ptmla[1]); /* insert address */ |
| if (ptmms[1] == 0) |
| { |
| out32r(PTM2MS, 0x00000001); /* set enable bit */ |
| pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, 0x00000000); |
| out32r(PTM2MS, 0x00000000); /* disable */ |
| } |
| else |
| { |
| out32r(PTM2MS, ptmms[1]); /* insert size, enable bit is 1 */ |
| } |
| |
| /* |
| * Insert Subsystem Vendor and Device ID |
| */ |
| pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CFG_PCI_SUBSYS_VENDORID); |
| #ifdef CONFIG_CPCI405 |
| if (mfdcr(strap) & PSR_PCI_ARBIT_EN) |
| pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID); |
| else |
| pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID2); |
| #else |
| pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID); |
| #endif |
| |
| /* |
| * Insert Class-code |
| */ |
| #ifdef CFG_PCI_CLASSCODE |
| pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CFG_PCI_CLASSCODE); |
| #endif /* CFG_PCI_CLASSCODE */ |
| |
| /*--------------------------------------------------------------------------+ |
| * If PCI speed = 66Mhz, set 66Mhz capable bit. |
| *--------------------------------------------------------------------------*/ |
| if (bd->bi_pci_busfreq >= 66000000) { |
| pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short); |
| pci_write_config_word(PCIDEVID_405GP,PCI_STATUS,(temp_short|PCI_STATUS_66MHZ)); |
| } |
| |
| #if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER) |
| #if (CONFIG_PCI_HOSE == PCI_HOST_AUTO) |
| if (mfdcr(strap) & PSR_PCI_ARBIT_EN) |
| #endif |
| { |
| /*--------------------------------------------------------------------------+ |
| * Write the 405GP PCI Configuration regs. |
| * Enable 405GP to be a master on the PCI bus (PMM). |
| * Enable 405GP to act as a PCI memory target (PTM). |
| *--------------------------------------------------------------------------*/ |
| pci_read_config_word(PCIDEVID_405GP, PCI_COMMAND, &temp_short); |
| pci_write_config_word(PCIDEVID_405GP, PCI_COMMAND, temp_short | |
| PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); |
| } |
| #endif |
| |
| /* |
| * Set HCE bit (Host Configuration Enabled) |
| */ |
| pci_read_config_word(PCIDEVID_405GP, PCIBRDGOPT2, &temp_short); |
| pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, (temp_short | 0x0001)); |
| |
| #ifdef CONFIG_PCI_PNP |
| /*--------------------------------------------------------------------------+ |
| * Scan the PCI bus and configure devices found. |
| *--------------------------------------------------------------------------*/ |
| #if (CONFIG_PCI_HOST == PCI_HOST_AUTO) |
| if (mfdcr(strap) & PSR_PCI_ARBIT_EN) |
| #endif |
| { |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| printf("PCI: Bus Dev VenId DevId Class Int\n"); |
| #endif |
| |
| hose->last_busno = pci_hose_scan(hose); |
| } |
| #endif /* CONFIG_PCI_PNP */ |
| |
| } |
| |
| /* |
| * drivers/pci.c skips every host bridge but the 405GP since it could |
| * be set as an Adapter. |
| * |
| * I (Andrew May) don't know what we should do here, but I don't want |
| * the auto setup of a PCI device disabling what is done pci_405gp_init |
| * as has happened before. |
| */ |
| void pci_405gp_setup_bridge(struct pci_controller *hose, pci_dev_t dev, |
| struct pci_config_table *entry) |
| { |
| #ifdef DEBUG |
| printf("405gp_setup_bridge\n"); |
| #endif |
| } |
| |
| /* |
| * |
| */ |
| |
| void pci_405gp_fixup_irq(struct pci_controller *hose, pci_dev_t dev) |
| { |
| unsigned char int_line = 0xff; |
| |
| /* |
| * Write pci interrupt line register (cpci405 specific) |
| */ |
| switch (PCI_DEV(dev) & 0x03) |
| { |
| case 0: |
| int_line = 27 + 2; |
| break; |
| case 1: |
| int_line = 27 + 3; |
| break; |
| case 2: |
| int_line = 27 + 0; |
| break; |
| case 3: |
| int_line = 27 + 1; |
| break; |
| } |
| |
| pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line); |
| } |
| |
| void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev, |
| struct pci_config_table *entry) |
| { |
| unsigned int cmdstat = 0; |
| |
| pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_io); |
| |
| /* always enable io space on vga boards */ |
| pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat); |
| cmdstat |= PCI_COMMAND_IO; |
| pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); |
| } |
| |
| #if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) |
| |
| /* |
| *As is these functs get called out of flash Not a horrible |
| *thing, but something to keep in mind. (no statics?) |
| */ |
| static struct pci_config_table pci_405gp_config_table[] = { |
| /*if VendID is 0 it terminates the table search (ie Walnut)*/ |
| #if CFG_PCI_SUBSYS_VENDORID |
| {CFG_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST, |
| PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge}, |
| #endif |
| {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, |
| PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga}, |
| |
| {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NOT_DEFINED_VGA, |
| PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga}, |
| |
| { } |
| }; |
| |
| static struct pci_controller hose = { |
| fixup_irq: pci_405gp_fixup_irq, |
| config_table: pci_405gp_config_table, |
| }; |
| |
| void pci_init_board(void) |
| { |
| /*we want the ptrs to RAM not flash (ie don't use init list)*/ |
| hose.fixup_irq = pci_405gp_fixup_irq; |
| hose.config_table = pci_405gp_config_table; |
| pci_405gp_init(&hose); |
| } |
| |
| #endif |
| |
| #endif /* CONFIG_PCI */ |
| |
| #endif /* CONFIG_405GP */ |
| |
| /*-----------------------------------------------------------------------------+ |
| * CONFIG_440 |
| *-----------------------------------------------------------------------------*/ |
| #if defined(CONFIG_440) && defined(CONFIG_PCI) |
| |
| static struct pci_controller ppc440_hose = {0}; |
| |
| |
| void pci_440_init (struct pci_controller *hose) |
| { |
| int reg_num = 0; |
| unsigned long strap; |
| |
| /*--------------------------------------------------------------------------+ |
| * The PCI initialization sequence enable bit must be set ... if not abort |
| * pci setup since updating the bit requires chip reset. |
| *--------------------------------------------------------------------------*/ |
| strap = mfdcr(cpc0_strp1); |
| if( (strap & 0x00040000) == 0 ){ |
| printf("PCI: CPC0_STRP1[PISE] not set.\n"); |
| printf("PCI: Configuration aborted.\n"); |
| return; |
| } |
| |
| /*--------------------------------------------------------------------------+ |
| * PCI controller init |
| *--------------------------------------------------------------------------*/ |
| hose->first_busno = 0; |
| hose->last_busno = 0xff; |
| |
| pci_set_region(hose->regions + reg_num++, |
| 0x00000000, |
| PCIX0_IOBASE, |
| 0x10000, |
| PCI_REGION_IO); |
| |
| pci_set_region(hose->regions + reg_num++, |
| CFG_PCI_TARGBASE, |
| CFG_PCI_MEMBASE, |
| 0x10000000, |
| PCI_REGION_MEM ); |
| hose->region_count = reg_num; |
| |
| pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA); |
| |
| #if defined(CFG_PCI_PRE_INIT) |
| /* Let board change/modify hose & do initial checks */ |
| if( pci_pre_init (hose) == 0 ){ |
| printf("PCI: Board-specific initialization failed.\n"); |
| printf("PCI: Configuration aborted.\n"); |
| return; |
| } |
| #endif |
| |
| pci_register_hose( hose ); |
| |
| /*--------------------------------------------------------------------------+ |
| * PCI target init |
| *--------------------------------------------------------------------------*/ |
| #if defined(CFG_PCI_TARGET_INIT) |
| pci_target_init(hose); /* Let board setup pci target */ |
| #else |
| out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); |
| out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_ID ); |
| out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */ |
| #endif |
| |
| out32r( PCIX0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */ |
| out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 1 ); /* Enable host config */ |
| |
| /*--------------------------------------------------------------------------+ |
| * PCI master init: default is one 256MB region for PCI memory: |
| * 0x3_00000000 - 0x3_0FFFFFFF ==> CFG_PCI_MEMBASE |
| *--------------------------------------------------------------------------*/ |
| #if defined(CFG_PCI_MASTER_INIT) |
| pci_master_init(hose); /* Let board setup pci master */ |
| #else |
| out32r( PCIX0_POM0SA, 0 ); /* disable */ |
| out32r( PCIX0_POM1SA, 0 ); /* disable */ |
| out32r( PCIX0_POM2SA, 0 ); /* disable */ |
| out32r( PCIX0_POM0LAL, 0x00000000 ); |
| out32r( PCIX0_POM0LAH, 0x00000003 ); |
| out32r( PCIX0_POM0PCIAL, CFG_PCI_MEMBASE ); |
| out32r( PCIX0_POM0PCIAH, 0x00000000 ); |
| out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */ |
| out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 ); |
| #endif |
| |
| /*--------------------------------------------------------------------------+ |
| * PCI host configuration -- we don't make any assumptions here ... the |
| * _board_must_indicate_ what to do -- there's just too many runtime |
| * scenarios in environments like cPCI, PPMC, etc. to make a determination |
| * based on hard-coded values or state of arbiter enable. |
| *--------------------------------------------------------------------------*/ |
| if( is_pci_host(hose) ){ |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| printf("PCI: Bus Dev VenId DevId Class Int\n"); |
| #endif |
| out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER); |
| hose->last_busno = pci_hose_scan(hose); |
| } |
| } |
| |
| |
| void pci_init_board(void) |
| { |
| pci_440_init (&ppc440_hose); |
| } |
| |
| #endif /* CONFIG_440 & CONFIG_PCI */ |