| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2008 |
| * Gururaja Hebbar gururajakr@sanyo.co.in |
| * |
| * reference linux-2.6.20.6/drivers/rtc/rtc-pl031.c |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <rtc.h> |
| #include <asm/io.h> |
| #include <asm/types.h> |
| |
| /* |
| * Register definitions |
| */ |
| #define RTC_DR 0x00 /* Data read register */ |
| #define RTC_MR 0x04 /* Match register */ |
| #define RTC_LR 0x08 /* Data load register */ |
| #define RTC_CR 0x0c /* Control register */ |
| #define RTC_IMSC 0x10 /* Interrupt mask and set register */ |
| #define RTC_RIS 0x14 /* Raw interrupt status register */ |
| #define RTC_MIS 0x18 /* Masked interrupt status register */ |
| #define RTC_ICR 0x1c /* Interrupt clear register */ |
| |
| #define RTC_CR_START (1 << 0) |
| |
| struct pl031_platdata { |
| phys_addr_t base; |
| }; |
| |
| static inline u32 pl031_read_reg(struct udevice *dev, int reg) |
| { |
| struct pl031_platdata *pdata = dev_get_platdata(dev); |
| |
| return readl(pdata->base + reg); |
| } |
| |
| static inline u32 pl031_write_reg(struct udevice *dev, int reg, u32 value) |
| { |
| struct pl031_platdata *pdata = dev_get_platdata(dev); |
| |
| return writel(value, pdata->base + reg); |
| } |
| |
| /* |
| * Probe RTC device |
| */ |
| static int pl031_probe(struct udevice *dev) |
| { |
| /* Enable RTC Start in Control register*/ |
| pl031_write_reg(dev, RTC_CR, RTC_CR_START); |
| |
| return 0; |
| } |
| |
| /* |
| * Get the current time from the RTC |
| */ |
| static int pl031_get(struct udevice *dev, struct rtc_time *tm) |
| { |
| unsigned long tim; |
| |
| if (!tm) |
| return -EINVAL; |
| |
| tim = pl031_read_reg(dev, RTC_DR); |
| |
| rtc_to_tm(tim, tm); |
| |
| debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", |
| tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, |
| tm->tm_hour, tm->tm_min, tm->tm_sec); |
| |
| return 0; |
| } |
| |
| /* |
| * Set the RTC |
| */ |
| static int pl031_set(struct udevice *dev, const struct rtc_time *tm) |
| { |
| unsigned long tim; |
| |
| if (!tm) |
| return -EINVAL; |
| |
| debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", |
| tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, |
| tm->tm_hour, tm->tm_min, tm->tm_sec); |
| |
| /* Calculate number of seconds this incoming time represents */ |
| tim = rtc_mktime(tm); |
| |
| pl031_write_reg(dev, RTC_LR, tim); |
| |
| return 0; |
| } |
| |
| /* |
| * Reset the RTC. We set the date back to 1970-01-01. |
| */ |
| static int pl031_reset(struct udevice *dev) |
| { |
| pl031_write_reg(dev, RTC_LR, 0); |
| |
| return 0; |
| } |
| |
| static const struct rtc_ops pl031_ops = { |
| .get = pl031_get, |
| .set = pl031_set, |
| .reset = pl031_reset, |
| }; |
| |
| static const struct udevice_id pl031_ids[] = { |
| { .compatible = "arm,pl031" }, |
| { } |
| }; |
| |
| static int pl031_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct pl031_platdata *pdata = dev_get_platdata(dev); |
| |
| pdata->base = dev_read_addr(dev); |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(rtc_pl031) = { |
| .name = "rtc-pl031", |
| .id = UCLASS_RTC, |
| .of_match = pl031_ids, |
| .probe = pl031_probe, |
| .ofdata_to_platdata = pl031_ofdata_to_platdata, |
| .platdata_auto_alloc_size = sizeof(struct pl031_platdata), |
| .ops = &pl031_ops, |
| }; |