| /* |
| * Copyright 2007-2010 Freescale Semiconductor, Inc. |
| * |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <libfdt.h> |
| #include <fdt_support.h> |
| #include <asm/processor.h> |
| #include <linux/ctype.h> |
| #ifdef CONFIG_FSL_ESDHC |
| #include <fsl_esdhc.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| extern void ft_qe_setup(void *blob); |
| extern void ft_fixup_num_cores(void *blob); |
| |
| #ifdef CONFIG_MP |
| #include "mp.h" |
| |
| void ft_fixup_cpu(void *blob, u64 memory_limit) |
| { |
| int off; |
| ulong spin_tbl_addr = get_spin_phys_addr(); |
| u32 bootpg = determine_mp_bootpg(); |
| u32 id = get_my_id(); |
| |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| while (off != -FDT_ERR_NOTFOUND) { |
| u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); |
| |
| if (reg) { |
| if (*reg == id) { |
| fdt_setprop_string(blob, off, "status", "okay"); |
| } else { |
| u64 val = *reg * SIZE_BOOT_ENTRY + spin_tbl_addr; |
| val = cpu_to_fdt32(val); |
| fdt_setprop_string(blob, off, "status", |
| "disabled"); |
| fdt_setprop_string(blob, off, "enable-method", |
| "spin-table"); |
| fdt_setprop(blob, off, "cpu-release-addr", |
| &val, sizeof(val)); |
| } |
| } else { |
| printf ("cpu NULL\n"); |
| } |
| off = fdt_node_offset_by_prop_value(blob, off, |
| "device_type", "cpu", 4); |
| } |
| |
| /* Reserve the boot page so OSes dont use it */ |
| if ((u64)bootpg < memory_limit) { |
| off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); |
| if (off < 0) |
| printf("%s: %s\n", __FUNCTION__, fdt_strerror(off)); |
| } |
| } |
| #endif |
| |
| #define ft_fixup_l3cache(x, y) |
| |
| #if defined(CONFIG_L2_CACHE) |
| /* return size in kilobytes */ |
| static inline u32 l2cache_size(void) |
| { |
| volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; |
| volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3; |
| u32 ver = SVR_SOC_VER(get_svr()); |
| |
| switch (l2siz_field) { |
| case 0x0: |
| break; |
| case 0x1: |
| if (ver == SVR_8540 || ver == SVR_8560 || |
| ver == SVR_8541 || ver == SVR_8541_E || |
| ver == SVR_8555 || ver == SVR_8555_E) |
| return 128; |
| else |
| return 256; |
| break; |
| case 0x2: |
| if (ver == SVR_8540 || ver == SVR_8560 || |
| ver == SVR_8541 || ver == SVR_8541_E || |
| ver == SVR_8555 || ver == SVR_8555_E) |
| return 256; |
| else |
| return 512; |
| break; |
| case 0x3: |
| return 1024; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static inline void ft_fixup_l2cache(void *blob) |
| { |
| int len, off; |
| u32 *ph; |
| struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); |
| char compat_buf[38]; |
| |
| const u32 line_size = 32; |
| const u32 num_ways = 8; |
| const u32 size = l2cache_size() * 1024; |
| const u32 num_sets = size / (line_size * num_ways); |
| |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| if (off < 0) { |
| debug("no cpu node fount\n"); |
| return; |
| } |
| |
| ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0); |
| |
| if (ph == NULL) { |
| debug("no next-level-cache property\n"); |
| return ; |
| } |
| |
| off = fdt_node_offset_by_phandle(blob, *ph); |
| if (off < 0) { |
| printf("%s: %s\n", __func__, fdt_strerror(off)); |
| return ; |
| } |
| |
| if (cpu) { |
| if (isdigit(cpu->name[0])) |
| len = sprintf(compat_buf, |
| "fsl,mpc%s-l2-cache-controller", cpu->name); |
| else |
| len = sprintf(compat_buf, |
| "fsl,%c%s-l2-cache-controller", |
| tolower(cpu->name[0]), cpu->name + 1); |
| |
| sprintf(&compat_buf[len + 1], "cache"); |
| } |
| fdt_setprop(blob, off, "cache-unified", NULL, 0); |
| fdt_setprop_cell(blob, off, "cache-block-size", line_size); |
| fdt_setprop_cell(blob, off, "cache-size", size); |
| fdt_setprop_cell(blob, off, "cache-sets", num_sets); |
| fdt_setprop_cell(blob, off, "cache-level", 2); |
| fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf)); |
| |
| /* we dont bother w/L3 since no platform of this type has one */ |
| } |
| #elif defined(CONFIG_BACKSIDE_L2_CACHE) |
| static inline void ft_fixup_l2cache(void *blob) |
| { |
| int off, l2_off, l3_off = -1; |
| u32 *ph; |
| u32 l2cfg0 = mfspr(SPRN_L2CFG0); |
| u32 size, line_size, num_ways, num_sets; |
| |
| size = (l2cfg0 & 0x3fff) * 64 * 1024; |
| num_ways = ((l2cfg0 >> 14) & 0x1f) + 1; |
| line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32; |
| num_sets = size / (line_size * num_ways); |
| |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| |
| while (off != -FDT_ERR_NOTFOUND) { |
| ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0); |
| |
| if (ph == NULL) { |
| debug("no next-level-cache property\n"); |
| goto next; |
| } |
| |
| l2_off = fdt_node_offset_by_phandle(blob, *ph); |
| if (l2_off < 0) { |
| printf("%s: %s\n", __func__, fdt_strerror(off)); |
| goto next; |
| } |
| |
| #ifdef CONFIG_SYS_CACHE_STASHING |
| { |
| u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); |
| if (reg) |
| fdt_setprop_cell(blob, l2_off, "cache-stash-id", |
| (*reg * 2) + 32 + 1); |
| } |
| #endif |
| |
| fdt_setprop(blob, l2_off, "cache-unified", NULL, 0); |
| fdt_setprop_cell(blob, l2_off, "cache-block-size", line_size); |
| fdt_setprop_cell(blob, l2_off, "cache-size", size); |
| fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets); |
| fdt_setprop_cell(blob, l2_off, "cache-level", 2); |
| fdt_setprop(blob, l2_off, "compatible", "cache", 6); |
| |
| if (l3_off < 0) { |
| ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0); |
| |
| if (ph == NULL) { |
| debug("no next-level-cache property\n"); |
| goto next; |
| } |
| l3_off = *ph; |
| } |
| next: |
| off = fdt_node_offset_by_prop_value(blob, off, |
| "device_type", "cpu", 4); |
| } |
| if (l3_off > 0) { |
| l3_off = fdt_node_offset_by_phandle(blob, l3_off); |
| if (l3_off < 0) { |
| printf("%s: %s\n", __func__, fdt_strerror(off)); |
| return ; |
| } |
| ft_fixup_l3cache(blob, l3_off); |
| } |
| } |
| #else |
| #define ft_fixup_l2cache(x) |
| #endif |
| |
| static inline void ft_fixup_cache(void *blob) |
| { |
| int off; |
| |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| |
| while (off != -FDT_ERR_NOTFOUND) { |
| u32 l1cfg0 = mfspr(SPRN_L1CFG0); |
| u32 l1cfg1 = mfspr(SPRN_L1CFG1); |
| u32 isize, iline_size, inum_sets, inum_ways; |
| u32 dsize, dline_size, dnum_sets, dnum_ways; |
| |
| /* d-side config */ |
| dsize = (l1cfg0 & 0x7ff) * 1024; |
| dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1; |
| dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32; |
| dnum_sets = dsize / (dline_size * dnum_ways); |
| |
| fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size); |
| fdt_setprop_cell(blob, off, "d-cache-size", dsize); |
| fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets); |
| |
| #ifdef CONFIG_SYS_CACHE_STASHING |
| { |
| u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); |
| if (reg) |
| fdt_setprop_cell(blob, off, "cache-stash-id", |
| (*reg * 2) + 32 + 0); |
| } |
| #endif |
| |
| /* i-side config */ |
| isize = (l1cfg1 & 0x7ff) * 1024; |
| inum_ways = ((l1cfg1 >> 11) & 0xff) + 1; |
| iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32; |
| inum_sets = isize / (iline_size * inum_ways); |
| |
| fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size); |
| fdt_setprop_cell(blob, off, "i-cache-size", isize); |
| fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets); |
| |
| off = fdt_node_offset_by_prop_value(blob, off, |
| "device_type", "cpu", 4); |
| } |
| |
| ft_fixup_l2cache(blob); |
| } |
| |
| |
| void fdt_add_enet_stashing(void *fdt) |
| { |
| do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1); |
| |
| do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1); |
| |
| do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1); |
| } |
| |
| #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME) |
| static void ft_fixup_clks(void *blob, const char *alias, unsigned long freq) |
| { |
| const char *path = fdt_get_alias(blob, alias); |
| |
| int off = fdt_path_offset(blob, path); |
| |
| if (off >= 0) { |
| off = fdt_setprop_cell(blob, off, "clock-frequency", freq); |
| if (off > 0) |
| printf("WARNING enable to set clock-frequency " |
| "for %s: %s\n", alias, fdt_strerror(off)); |
| } |
| } |
| |
| static void ft_fixup_dpaa_clks(void *blob) |
| { |
| sys_info_t sysinfo; |
| |
| get_sys_info(&sysinfo); |
| ft_fixup_clks(blob, "fman0", sysinfo.freqFMan[0]); |
| |
| #if (CONFIG_SYS_NUM_FMAN == 2) |
| ft_fixup_clks(blob, "fman1", sysinfo.freqFMan[1]); |
| #endif |
| |
| #ifdef CONFIG_SYS_DPAA_PME |
| ft_fixup_clks(blob, "pme", sysinfo.freqPME); |
| #endif |
| } |
| #else |
| #define ft_fixup_dpaa_clks(x) |
| #endif |
| |
| #ifdef CONFIG_QE |
| static void ft_fixup_qe_snum(void *blob) |
| { |
| unsigned int svr; |
| |
| svr = mfspr(SPRN_SVR); |
| if (SVR_SOC_VER(svr) == SVR_8569_E) { |
| if(IS_SVR_REV(svr, 1, 0)) |
| do_fixup_by_compat_u32(blob, "fsl,qe", |
| "fsl,qe-num-snums", 46, 1); |
| else |
| do_fixup_by_compat_u32(blob, "fsl,qe", |
| "fsl,qe-num-snums", 76, 1); |
| } |
| } |
| #endif |
| |
| void ft_cpu_setup(void *blob, bd_t *bd) |
| { |
| int off; |
| int val; |
| sys_info_t sysinfo; |
| |
| /* delete crypto node if not on an E-processor */ |
| if (!IS_E_PROCESSOR(get_svr())) |
| fdt_fixup_crypto_node(blob, 0); |
| |
| fdt_fixup_ethernet(blob); |
| |
| fdt_add_enet_stashing(blob); |
| |
| do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, |
| "timebase-frequency", get_tbclk(), 1); |
| do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, |
| "bus-frequency", bd->bi_busfreq, 1); |
| get_sys_info(&sysinfo); |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| while (off != -FDT_ERR_NOTFOUND) { |
| u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); |
| val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]); |
| fdt_setprop(blob, off, "clock-frequency", &val, 4); |
| off = fdt_node_offset_by_prop_value(blob, off, "device_type", |
| "cpu", 4); |
| } |
| do_fixup_by_prop_u32(blob, "device_type", "soc", 4, |
| "bus-frequency", bd->bi_busfreq, 1); |
| |
| do_fixup_by_compat_u32(blob, "fsl,pq3-localbus", |
| "bus-frequency", gd->lbc_clk, 1); |
| do_fixup_by_compat_u32(blob, "fsl,elbc", |
| "bus-frequency", gd->lbc_clk, 1); |
| #ifdef CONFIG_QE |
| ft_qe_setup(blob); |
| ft_fixup_qe_snum(blob); |
| #endif |
| |
| #ifdef CONFIG_SYS_NS16550 |
| do_fixup_by_compat_u32(blob, "ns16550", |
| "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); |
| #endif |
| |
| #ifdef CONFIG_CPM2 |
| do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart", |
| "current-speed", bd->bi_baudrate, 1); |
| |
| do_fixup_by_compat_u32(blob, "fsl,cpm2-brg", |
| "clock-frequency", bd->bi_brgfreq, 1); |
| #endif |
| |
| fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); |
| |
| #ifdef CONFIG_MP |
| ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize); |
| ft_fixup_num_cores(blob); |
| #endif |
| |
| ft_fixup_cache(blob); |
| |
| #if defined(CONFIG_FSL_ESDHC) |
| fdt_fixup_esdhc(blob, bd); |
| #endif |
| |
| ft_fixup_dpaa_clks(blob); |
| } |