blob: 0e93836c0cc23f6eec940f459e1486c8bedb9541 [file] [log] [blame]
/*
* Copyright (C) 2013 Samsung Electronics
* Sanghee Kim <sh0130.kim@samsung.com>
* Piotr Wilczek <p.wilczek@samsung.com>
*
* Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_SAMSUNG /* in a SAMSUNG core */
#define CONFIG_S5P /* which is in a S5P Family */
#define CONFIG_EXYNOS4 /* which is in a EXYNOS4XXX */
#define CONFIG_TIZEN /* TIZEN lib */
#define PLATFORM_NO_UNALIGNED
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_CACHELINE_SIZE 32
#ifndef CONFIG_SYS_L2CACHE_OFF
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE 0x10502000
#endif
#define CONFIG_NR_DRAM_BANKS 4
#define PHYS_SDRAM_1 0x40000000 /* LDDDR2 DMC 0 */
#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */
#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */
#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */
#define PHYS_SDRAM_3 0x60000000 /* LPDDR2 DMC 1 */
#define PHYS_SDRAM_3_SIZE (256 << 20) /* 256 MB in CS 0 */
#define PHYS_SDRAM_4 0x70000000 /* LPDDR2 DMC 1 */
#define PHYS_SDRAM_4_SIZE (256 << 20) /* 256 MB in CS 0 */
#define PHYS_SDRAM_END 0x80000000
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
#define CONFIG_SYS_TEXT_BASE 0x78100000
#define CONFIG_SYS_CLK_FREQ 24000000
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_REVISION_TAG
/* MACH_TYPE_TRATS2 */
#define MACH_TYPE_TRATS2 3765
#define CONFIG_MACH_TYPE MACH_TYPE_TRATS2
#define CONFIG_DISPLAY_CPUINFO
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_CMDLINE_EDITING
#define CONFIG_BAUDRATE 115200
/* It should define before config_cmd_default.h */
#define CONFIG_SYS_NO_FLASH
/***********************************************************
* Command definition
***********************************************************/
#include <config_cmd_default.h>
#undef CONFIG_CMD_ECHO
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_MISC
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_XIMG
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MMC
#define CONFIG_CMD_GPT
#define CONFIG_CMD_PMIC
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE
/* EXT4 */
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
/* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */
#undef CONFIG_CMD_NET
/* MMC */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_S5P_SDHCI
#define CONFIG_SDHCI
#define CONFIG_MMC_SDMA
#define CONFIG_MMC_DEFAULT_DEV 0
/* PWM */
#define CONFIG_PWM
#define CONFIG_BOOTARGS "Please use defined boot"
#define CONFIG_BOOTCOMMAND "run mmcboot"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
/* Tizen - partitions definitions */
#define PARTS_CSA "csa-mmc"
#define PARTS_BOOTLOADER "u-boot"
#define PARTS_BOOT "boot"
#define PARTS_ROOT "platform"
#define PARTS_DATA "data"
#define PARTS_CSC "csc"
#define PARTS_UMS "ums"
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
"name="PARTS_BOOTLOADER",size=60MiB," \
"uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
"name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
"name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
"name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootk=" \
"run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
"updatemmc=" \
"mmc boot 0 1 1 1; mmc write 0x42008000 0 0x200;" \
"mmc boot 0 1 1 0\0" \
"updatebackup=" \
"mmc boot 0 1 1 2; mmc write 0x42100000 0 0x200;" \
" mmc boot 0 1 1 0\0" \
"updatebootb=" \
"mmc read 0x51000000 0x80 0x200; run updatebackup\0" \
"updateuboot=" \
"mmc write 0x50000000 0x80 0x400\0" \
"mmcboot=" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
"run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
"kernelname=uImage\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
"0x40007FC0 ${kernelname}\0" \
"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
"${fdtfile}\0" \
"mmcdev=0\0" \
"mmcbootpart=2\0" \
"mmcrootpart=5\0" \
"opts=always_resume=1\0" \
"partitions=" PARTS_DEFAULT \
"uartpath=ap\0" \
"usbpath=ap\0" \
"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
"consoleoff=set console console=ram; save; reset\0" \
"spladdr=0x40000100\0" \
"splsize=0x200\0" \
"splfile=falcon.bin\0" \
"spl_export=" \
"setexpr spl_imgsize ${splsize} + 8 ;" \
"setenv spl_imgsize 0x${spl_imgsize};" \
"setexpr spl_imgaddr ${spladdr} - 8 ;" \
"setexpr spl_addr_tmp ${spladdr} - 4 ;" \
"mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
"spl export atags 0x40007FC0;" \
"crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
"mw.l ${spl_addr_tmp} ${splsize};" \
"ext4write mmc ${mmcdev}:${mmcbootpart}" \
" /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
"setenv spl_imgsize;" \
"setenv spl_imgaddr;" \
"setenv spl_addr_tmp;\0" \
"fdtaddr=40800000\0" \
"fdtfile=exynos4412-trats2.dtb\0"
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_HZ 1000
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_MONITOR_BASE 0x00000000
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
#define CONFIG_ENV_SIZE 4096
#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
#define CONFIG_EFI_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_MISC_INIT_R
#define CONFIG_BOARD_EARLY_INIT_F
/* I2C */
#include <asm/arch/gpio.h>
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
#define I2C_SOFT_DECLARATIONS2
#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00
#define I2C_SOFT_DECLARATIONS3
#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x00
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SOFT_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 15
#define CONFIG_SOFT_I2C_I2C5_SCL exynos4x12_gpio_part1_get_nr(d0, 3)
#define CONFIG_SOFT_I2C_I2C5_SDA exynos4x12_gpio_part1_get_nr(d0, 2)
#define CONFIG_SOFT_I2C_I2C9_SCL exynos4x12_gpio_part1_get_nr(f1, 4)
#define CONFIG_SOFT_I2C_I2C9_SDA exynos4x12_gpio_part1_get_nr(f1, 5)
#define CONFIG_SOFT_I2C_I2C10_SCL exynos4x12_gpio_part2_get_nr(m2, 1)
#define CONFIG_SOFT_I2C_I2C10_SDA exynos4x12_gpio_part2_get_nr(m2, 0)
#define CONFIG_SOFT_I2C_GPIO_SCL get_multi_scl_pin()
#define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin()
#define I2C_INIT multi_i2c_init()
/* POWER */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_MAX77686
#define CONFIG_POWER_PMIC_MAX77693
#define CONFIG_POWER_MUIC_MAX77693
#define CONFIG_POWER_FG_MAX77693
#define CONFIG_POWER_BATTERY_TRATS2
/* LCD */
#define CONFIG_EXYNOS_FB
#define CONFIG_LCD
#define CONFIG_CMD_BMP
#define CONFIG_BMP_32BPP
#define CONFIG_FB_ADDR 0x52504000
#define CONFIG_S6E8AX0
#define CONFIG_EXYNOS_MIPI_DSIM
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 250 * 4) + (1 << 12))
/* Pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#endif /* __CONFIG_H */