include/configs/trats2.h - platform/external/u-boot - Gitiles

 /*
  * Copyright (C) 2013 Samsung Electronics
  * Sanghee Kim <sh0130.kim@samsung.com>
  * Piotr Wilczek <p.wilczek@samsung.com>
  *
  * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */
 #define CONFIG_SAMSUNG		/* in a SAMSUNG core */
 #define CONFIG_S5P		/* which is in a S5P Family */
 #define CONFIG_EXYNOS4		/* which is in a EXYNOS4XXX */
 #define CONFIG_TIZEN		/* TIZEN lib */

 #include <asm/arch/cpu.h>		/* get chip and board defs */

 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

 #define CONFIG_SKIP_LOWLEVEL_INIT

 #define CONFIG_SYS_CACHELINE_SIZE	32

 #define CONFIG_SYS_L2CACHE_OFF
 #ifndef CONFIG_SYS_L2CACHE_OFF
 #define CONFIG_SYS_L2_PL310
 #define CONFIG_SYS_PL310_BASE	0x10502000
 #endif

 #define CONFIG_NR_DRAM_BANKS	4
 #define PHYS_SDRAM_1		0x40000000	/* LDDDR2 DMC 0 */
 #define PHYS_SDRAM_1_SIZE	(256 << 20)	/* 256 MB in CS 0 */
 #define PHYS_SDRAM_2		0x50000000	/* LPDDR2 DMC 1 */
 #define PHYS_SDRAM_2_SIZE	(256 << 20)	/* 256 MB in CS 0 */
 #define PHYS_SDRAM_3		0x60000000	/* LPDDR2 DMC 1 */
 #define PHYS_SDRAM_3_SIZE	(256 << 20)	/* 256 MB in CS 0 */
 #define PHYS_SDRAM_4		0x70000000	/* LPDDR2 DMC 1 */
 #define PHYS_SDRAM_4_SIZE	(256 << 20)	/* 256 MB in CS 0 */
 #define PHYS_SDRAM_END		0x80000000

 #define CONFIG_SYS_MEM_TOP_HIDE		(1 << 20)	/* ram console */

 #define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
 #define CONFIG_SYS_TEXT_BASE		0x78100000

 #define CONFIG_SYS_CLK_FREQ		24000000

 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_REVISION_TAG

 /* MACH_TYPE_TRATS2 */
 #define MACH_TYPE_TRATS2		3765
 #define CONFIG_MACH_TYPE		MACH_TYPE_TRATS2

 #define CONFIG_DISPLAY_CPUINFO

 #include <asm/sizes.h>
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 * SZ_1M))

 /* select serial console configuration */
 #define CONFIG_SERIAL2

 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

 #define CONFIG_CMDLINE_EDITING

 #define CONFIG_BAUDRATE			115200

 /* It should define before config_cmd_default.h */
 #define CONFIG_SYS_NO_FLASH

 /***********************************************************
  * Command definition
  ***********************************************************/
 #include <config_cmd_default.h>

 #undef CONFIG_CMD_ECHO
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_NAND
 #undef CONFIG_CMD_MISC
 #undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_DFU
 #define CONFIG_CMD_GPT
 #define CONFIG_CMD_PMIC

 #define CONFIG_BOOTDELAY	3
 #define CONFIG_ZERO_BOOTDELAY_CHECK

 #define CONFIG_CMD_FAT
 #define CONFIG_FAT_WRITE

 /* EXT4 */
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE

 /* USB Composite download gadget - g_dnl */
 #define CONFIG_USBDOWNLOAD_GADGET
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
 #define DFU_DEFAULT_POLL_TIMEOUT 300
 #define CONFIG_DFU_FUNCTION
 #define CONFIG_DFU_MMC

 /* TIZEN THOR downloader support */
 #define CONFIG_CMD_THOR_DOWNLOAD
 #define CONFIG_THOR_FUNCTION

 /* USB Samsung's IDs */
 #define CONFIG_G_DNL_VENDOR_NUM 0x04E8
 #define CONFIG_G_DNL_PRODUCT_NUM 0x6601
 #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
 #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
 #define CONFIG_G_DNL_MANUFACTURER "Samsung"

 /* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */
 #undef CONFIG_CMD_NET

 /* MMC */
 #define CONFIG_GENERIC_MMC
 #define CONFIG_MMC
 #define CONFIG_S5P_SDHCI
 #define CONFIG_SDHCI
 #define CONFIG_MMC_SDMA
 #define CONFIG_MMC_DEFAULT_DEV	0

 /* PWM */
 #define CONFIG_PWM

 #define CONFIG_BOOTARGS		"Please use defined boot"
 #define CONFIG_BOOTCOMMAND	"run mmcboot"
 #define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"

 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV

 /* Tizen - partitions definitions */
 #define PARTS_CSA		"csa"
 #define PARTS_BOOT		"boot"
 #define PARTS_MODEM		"modem"
 #define PARTS_CSC		"csc"
 #define PARTS_ROOT		"platform"
 #define PARTS_DATA		"data"
 #define PARTS_UMS		"ums"

 #define PARTS_DEFAULT \
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
 	"name="PARTS_BOOT",size=64MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
 	"name="PARTS_MODEM",size=100MiB,uuid=${uuid_gpt_"PARTS_MODEM"};" \
 	"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
 	"name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
 	"name="PARTS_DATA",size=512MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
 	"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \

 #define CONFIG_DFU_ALT \
 	"u-boot mmc 80 800;" \
 	"uImage ext4 0 2;" \
 	"exynos4412-trats2.dtb ext4 0 2;" \
 	""PARTS_BOOT" part 0 2;" \
 	""PARTS_ROOT" part 0 5;" \
 	""PARTS_DATA" part 0 6;" \
 	""PARTS_UMS" part 0 7\0"

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootk=" \
 		"run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
 	"updatemmc=" \
 		"mmc boot 0 1 1 1; mmc write 0x42008000 0 0x200;" \
 		"mmc boot 0 1 1 0\0" \
 	"updatebackup=" \
 		"mmc boot 0 1 1 2; mmc write 0x42100000 0 0x200;" \
 		" mmc boot 0 1 1 0\0" \
 	"updatebootb=" \
 		"mmc read 0x51000000 0x80 0x200; run updatebackup\0" \
 	"updateuboot=" \
 		"mmc write 0x50000000 0x80 0x400\0" \
 	"mmcboot=" \
 		"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 		"run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
 	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
 	"verify=n\0" \
 	"rootfstype=ext4\0" \
 	"console=" CONFIG_DEFAULT_CONSOLE \
 	"kernelname=uImage\0" \
 	"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
 		"${kernelname}\0" \
 	"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
 		"${fdtfile}\0" \
 	"mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
 	"mmcbootpart=2\0" \
 	"mmcrootpart=5\0" \
 	"opts=always_resume=1\0" \
 	"partitions=" PARTS_DEFAULT \
 	"dfu_alt_info=" CONFIG_DFU_ALT \
 	"uartpath=ap\0" \
 	"usbpath=ap\0" \
 	"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
 	"consoleoff=set console console=ram; save; reset\0" \
 	"spladdr=0x40000100\0" \
 	"splsize=0x200\0" \
 	"splfile=falcon.bin\0" \
 	"spl_export=" \
 		   "setexpr spl_imgsize ${splsize} + 8 ;" \
 		   "setenv spl_imgsize 0x${spl_imgsize};" \
 		   "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 		   "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 		   "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 		   "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 		   "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 		   "spl export atags 0x40007FC0;" \
 		   "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 		   "mw.l ${spl_addr_tmp} ${splsize};" \
 		   "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 		   " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 		   "setenv spl_imgsize;" \
 		   "setenv spl_imgaddr;" \
 		   "setenv spl_addr_tmp;\0" \
 	"fdtaddr=40800000\0" \
 	"fdtfile=exynos4412-trats2.dtb\0"

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_SYS_PROMPT	"Trats2 # "	/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE	384		/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	32		/* max number of command args */

 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)

 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_LOAD_ADDR \
 					- GENERATED_GBL_DATA_SIZE)

 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_SYS_MONITOR_BASE		0x00000000

 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */

 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */

 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
 #define CONFIG_ENV_SIZE			4096
 #define CONFIG_ENV_OFFSET		((32 - 4) << 10) /* 32KiB - 4KiB */
 #define CONFIG_EFI_PARTITION
 #define CONFIG_PARTITION_UUIDS

 #define CONFIG_BOARD_EARLY_INIT_F

 /* I2C */
 #include <asm/arch/gpio.h>

 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_S3C24X0
 #define CONFIG_SYS_I2C_S3C24X0_SPEED	100000
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE	0
 #define CONFIG_MAX_I2C_NUM		8
 #define CONFIG_SYS_I2C_SOFT
 #define CONFIG_SYS_I2C_SOFT_SPEED	50000
 #define CONFIG_SYS_I2C_SOFT_SLAVE	0x00
 #define I2C_SOFT_DECLARATIONS2
 #define CONFIG_SYS_I2C_SOFT_SPEED_2     50000
 #define CONFIG_SYS_I2C_SOFT_SLAVE_2     0x00
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
 #define CONFIG_SYS_I2C_INIT_BOARD

 #ifndef __ASSEMBLY__
 int get_soft_i2c_scl_pin(void);
 int get_soft_i2c_sda_pin(void);
 #endif
 #define CONFIG_SOFT_I2C_GPIO_SCL	get_soft_i2c_scl_pin()
 #define CONFIG_SOFT_I2C_GPIO_SDA	get_soft_i2c_sda_pin()

 /* POWER */
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_MAX77686
 #define CONFIG_POWER_PMIC_MAX77693
 #define CONFIG_POWER_MUIC_MAX77693
 #define CONFIG_POWER_FG_MAX77693
 #define CONFIG_POWER_BATTERY_TRATS2
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_CABLE_CHECK

 /* Common misc for Samsung */
 #define CONFIG_MISC_COMMON

 #define CONFIG_MISC_INIT_R

 /* LCD */
 #define CONFIG_EXYNOS_FB
 #define CONFIG_LCD
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_32BPP
 #define CONFIG_FB_ADDR		0x52504000
 #define CONFIG_S6E8AX0
 #define CONFIG_EXYNOS_MIPI_DSIM
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)

 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_GADGET_MASS_STORAGE

 /* Pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT    1

 #endif	/* __CONFIG_H */
	/*
	* Copyright (C) 2013 Samsung Electronics
	* Sanghee Kim <sh0130.kim@samsung.com>
	* Piotr Wilczek <p.wilczek@samsung.com>
	*
	* Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/
	#define CONFIG_SAMSUNG /* in a SAMSUNG core */
	#define CONFIG_S5P /* which is in a S5P Family */
	#define CONFIG_EXYNOS4 /* which is in a EXYNOS4XXX */
	#define CONFIG_TIZEN /* TIZEN lib */

	#include <asm/arch/cpu.h> /* get chip and board defs */

	#define CONFIG_ARCH_CPU_INIT
	#define CONFIG_DISPLAY_CPUINFO
	#define CONFIG_DISPLAY_BOARDINFO

	#define CONFIG_SKIP_LOWLEVEL_INIT

	#define CONFIG_SYS_CACHELINE_SIZE 32

	#define CONFIG_SYS_L2CACHE_OFF
	#ifndef CONFIG_SYS_L2CACHE_OFF
	#define CONFIG_SYS_L2_PL310
	#define CONFIG_SYS_PL310_BASE 0x10502000
	#endif

	#define CONFIG_NR_DRAM_BANKS 4
	#define PHYS_SDRAM_1 0x40000000 /* LDDDR2 DMC 0 */
	#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */
	#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */
	#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */
	#define PHYS_SDRAM_3 0x60000000 /* LPDDR2 DMC 1 */
	#define PHYS_SDRAM_3_SIZE (256 << 20) /* 256 MB in CS 0 */
	#define PHYS_SDRAM_4 0x70000000 /* LPDDR2 DMC 1 */
	#define PHYS_SDRAM_4_SIZE (256 << 20) /* 256 MB in CS 0 */
	#define PHYS_SDRAM_END 0x80000000

	#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */

	#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
	#define CONFIG_SYS_TEXT_BASE 0x78100000

	#define CONFIG_SYS_CLK_FREQ 24000000

	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_CMDLINE_TAG
	#define CONFIG_REVISION_TAG

	/* MACH_TYPE_TRATS2 */
	#define MACH_TYPE_TRATS2 3765
	#define CONFIG_MACH_TYPE MACH_TYPE_TRATS2

	#define CONFIG_DISPLAY_CPUINFO

	#include <asm/sizes.h>
	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))

	/* select serial console configuration */
	#define CONFIG_SERIAL2

	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

	#define CONFIG_CMDLINE_EDITING

	#define CONFIG_BAUDRATE 115200

	/* It should define before config_cmd_default.h */
	#define CONFIG_SYS_NO_FLASH

	/***********************************************************
	* Command definition
	***********************************************************/
	#include <config_cmd_default.h>

	#undef CONFIG_CMD_ECHO
	#undef CONFIG_CMD_FPGA
	#undef CONFIG_CMD_FLASH
	#undef CONFIG_CMD_IMLS
	#undef CONFIG_CMD_NAND
	#undef CONFIG_CMD_MISC
	#undef CONFIG_CMD_NFS
	#undef CONFIG_CMD_SOURCE
	#undef CONFIG_CMD_XIMG
	#define CONFIG_CMD_CACHE
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_MMC
	#define CONFIG_CMD_DFU
	#define CONFIG_CMD_GPT
	#define CONFIG_CMD_PMIC

	#define CONFIG_BOOTDELAY 3
	#define CONFIG_ZERO_BOOTDELAY_CHECK

	#define CONFIG_CMD_FAT
	#define CONFIG_FAT_WRITE

	/* EXT4 */
	#define CONFIG_CMD_EXT4
	#define CONFIG_CMD_EXT4_WRITE

	/* USB Composite download gadget - g_dnl */
	#define CONFIG_USBDOWNLOAD_GADGET
	#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
	#define DFU_DEFAULT_POLL_TIMEOUT 300
	#define CONFIG_DFU_FUNCTION
	#define CONFIG_DFU_MMC

	/* TIZEN THOR downloader support */
	#define CONFIG_CMD_THOR_DOWNLOAD
	#define CONFIG_THOR_FUNCTION

	/* USB Samsung's IDs */
	#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
	#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
	#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
	#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
	#define CONFIG_G_DNL_MANUFACTURER "Samsung"

	/* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */
	#undef CONFIG_CMD_NET

	/* MMC */
	#define CONFIG_GENERIC_MMC
	#define CONFIG_MMC
	#define CONFIG_S5P_SDHCI
	#define CONFIG_SDHCI
	#define CONFIG_MMC_SDMA
	#define CONFIG_MMC_DEFAULT_DEV 0

	/* PWM */
	#define CONFIG_PWM

	#define CONFIG_BOOTARGS "Please use defined boot"
	#define CONFIG_BOOTCOMMAND "run mmcboot"
	#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"

	#define CONFIG_ENV_OVERWRITE
	#define CONFIG_SYS_CONSOLE_INFO_QUIET
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV

	/* Tizen - partitions definitions */
	#define PARTS_CSA "csa"
	#define PARTS_BOOT "boot"
	#define PARTS_MODEM "modem"
	#define PARTS_CSC "csc"
	#define PARTS_ROOT "platform"
	#define PARTS_DATA "data"
	#define PARTS_UMS "ums"

	#define PARTS_DEFAULT \
	"uuid_disk=${uuid_gpt_disk};" \
	"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
	"name="PARTS_BOOT",size=64MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
	"name="PARTS_MODEM",size=100MiB,uuid=${uuid_gpt_"PARTS_MODEM"};" \
	"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
	"name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
	"name="PARTS_DATA",size=512MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
	"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \

	#define CONFIG_DFU_ALT \
	"u-boot mmc 80 800;" \
	"uImage ext4 0 2;" \
	"exynos4412-trats2.dtb ext4 0 2;" \
	""PARTS_BOOT" part 0 2;" \
	""PARTS_ROOT" part 0 5;" \
	""PARTS_DATA" part 0 6;" \
	""PARTS_UMS" part 0 7\0"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootk=" \
	"run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
	"updatemmc=" \
	"mmc boot 0 1 1 1; mmc write 0x42008000 0 0x200;" \
	"mmc boot 0 1 1 0\0" \
	"updatebackup=" \
	"mmc boot 0 1 1 2; mmc write 0x42100000 0 0x200;" \
	" mmc boot 0 1 1 0\0" \
	"updatebootb=" \
	"mmc read 0x51000000 0x80 0x200; run updatebackup\0" \
	"updateuboot=" \
	"mmc write 0x50000000 0x80 0x400\0" \
	"mmcboot=" \
	"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
	"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
	"run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
	"verify=n\0" \
	"rootfstype=ext4\0" \
	"console=" CONFIG_DEFAULT_CONSOLE \
	"kernelname=uImage\0" \
	"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
	"${kernelname}\0" \
	"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
	"${fdtfile}\0" \
	"mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
	"mmcbootpart=2\0" \
	"mmcrootpart=5\0" \
	"opts=always_resume=1\0" \
	"partitions=" PARTS_DEFAULT \
	"dfu_alt_info=" CONFIG_DFU_ALT \
	"uartpath=ap\0" \
	"usbpath=ap\0" \
	"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
	"consoleoff=set console console=ram; save; reset\0" \
	"spladdr=0x40000100\0" \
	"splsize=0x200\0" \
	"splfile=falcon.bin\0" \
	"spl_export=" \
	"setexpr spl_imgsize ${splsize} + 8 ;" \
	"setenv spl_imgsize 0x${spl_imgsize};" \
	"setexpr spl_imgaddr ${spladdr} - 8 ;" \
	"setexpr spl_addr_tmp ${spladdr} - 4 ;" \
	"mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
	"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
	"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
	"spl export atags 0x40007FC0;" \
	"crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
	"mw.l ${spl_addr_tmp} ${splsize};" \
	"ext4write mmc ${mmcdev}:${mmcbootpart}" \
	" /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
	"setenv spl_imgsize;" \
	"setenv spl_imgaddr;" \
	"setenv spl_addr_tmp;\0" \
	"fdtaddr=40800000\0" \
	"fdtfile=exynos4412-trats2.dtb\0"

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */

	/* Boot Argument Buffer Size */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

	/* memtest works on */
	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)

	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
	- GENERATED_GBL_DATA_SIZE)

	/* valid baudrates */
	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	#define CONFIG_SYS_MONITOR_BASE 0x00000000

	/*-----------------------------------------------------------------------
	* FLASH and environment organization
	*/

	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */

	#define CONFIG_ENV_IS_IN_MMC
	#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
	#define CONFIG_ENV_SIZE 4096
	#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
	#define CONFIG_EFI_PARTITION
	#define CONFIG_PARTITION_UUIDS

	#define CONFIG_BOARD_EARLY_INIT_F

	/* I2C */
	#include <asm/arch/gpio.h>

	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_S3C24X0
	#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
	#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0
	#define CONFIG_MAX_I2C_NUM 8
	#define CONFIG_SYS_I2C_SOFT
	#define CONFIG_SYS_I2C_SOFT_SPEED 50000
	#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
	#define I2C_SOFT_DECLARATIONS2
	#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
	#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00
	#define CONFIG_SOFT_I2C_READ_REPEATED_START
	#define CONFIG_SYS_I2C_INIT_BOARD

	#ifndef __ASSEMBLY__
	int get_soft_i2c_scl_pin(void);
	int get_soft_i2c_sda_pin(void);
	#endif
	#define CONFIG_SOFT_I2C_GPIO_SCL get_soft_i2c_scl_pin()
	#define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin()

	/* POWER */
	#define CONFIG_POWER
	#define CONFIG_POWER_I2C
	#define CONFIG_POWER_MAX77686
	#define CONFIG_POWER_PMIC_MAX77693
	#define CONFIG_POWER_MUIC_MAX77693
	#define CONFIG_POWER_FG_MAX77693
	#define CONFIG_POWER_BATTERY_TRATS2
	#define CONFIG_USB_GADGET
	#define CONFIG_USB_GADGET_S3C_UDC_OTG
	#define CONFIG_USB_GADGET_DUALSPEED
	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	#define CONFIG_USB_CABLE_CHECK

	/* Common misc for Samsung */
	#define CONFIG_MISC_COMMON

	#define CONFIG_MISC_INIT_R

	/* LCD */
	#define CONFIG_EXYNOS_FB
	#define CONFIG_LCD
	#define CONFIG_CMD_BMP
	#define CONFIG_BMP_32BPP
	#define CONFIG_FB_ADDR 0x52504000
	#define CONFIG_S6E8AX0
	#define CONFIG_EXYNOS_MIPI_DSIM
	#define CONFIG_VIDEO_BMP_GZIP
	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)

	#define CONFIG_CMD_USB_MASS_STORAGE
	#define CONFIG_USB_GADGET_MASS_STORAGE

	/* Pass open firmware flat tree */
	#define CONFIG_OF_LIBFDT 1

	#endif /* __CONFIG_H */