drivers/mmc/gen_atmel_mci.c - platform/external/u-boot - Gitiles

 /*
  * Copyright (C) 2010
  * Rob Emanuele <rob@emanuele.us>
  * Reinhard Meyer, EMK Elektronik <reinhard.meyer@emk-elektronik.de>
  *
  * Original Driver:
  * Copyright (C) 2004-2006 Atmel Corporation
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <mmc.h>
 #include <part.h>
 #include <malloc.h>
 #include <asm/io.h>
 #include <asm/errno.h>
 #include <asm/byteorder.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/hardware.h>
 #include "atmel_mci.h"

 #ifndef CONFIG_SYS_MMC_CLK_OD
 # define CONFIG_SYS_MMC_CLK_OD	150000
 #endif

 #define MMC_DEFAULT_BLKLEN	512

 #if defined(CONFIG_ATMEL_MCI_PORTB)
 # define MCI_BUS 1
 #else
 # define MCI_BUS 0
 #endif

 static int initialized = 0;

 /*
  * Print command and status:
  *
  * - always when DEBUG is defined
  * - on command errors
  */
 static void dump_cmd(u32 cmdr, u32 arg, u32 status, const char* msg)
 {
 	printf("gen_atmel_mci: CMDR %08x (%2u) ARGR %08x (SR: %08x) %s\n",
 		cmdr, cmdr&0x3F, arg, status, msg);
 }

 /* Setup for MCI Clock and Block Size */
 static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen)
 {
 	atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;
 	u32 bus_hz = get_mci_clk_rate();
 	u32 clkdiv = 255;

 	debug("mci: bus_hz is %u, setting clock %u Hz, block size %u\n",
 		bus_hz, hz, blklen);
 	if (hz > 0) {
 		/* find lowest clkdiv yielding a rate <= than requested */
 		for (clkdiv=0; clkdiv<255; clkdiv++) {
 			if ((bus_hz / (clkdiv+1) / 2) <= hz)
 				break;
 		}
 	}
 	printf("mci: setting clock %u Hz, block size %u\n",
 		(bus_hz / (clkdiv+1)) / 2, blklen);

 	blklen &= 0xfffc;
 	/* On some platforms RDPROOF and WRPROOF are ignored */
 	writel((MMCI_BF(CLKDIV, clkdiv)
 		 | MMCI_BF(BLKLEN, blklen)
 		 | MMCI_BIT(RDPROOF)
 		 | MMCI_BIT(WRPROOF)), &mci->mr);
 	initialized = 1;
 }

 /* Return the CMDR with flags for a given command and data packet */
 static u32 mci_encode_cmd(
 	struct mmc_cmd *cmd, struct mmc_data *data, u32* error_flags)
 {
 	u32 cmdr = 0;

 	/* Default Flags for Errors */
 	*error_flags |= (MMCI_BIT(DTOE) | MMCI_BIT(RDIRE) | MMCI_BIT(RENDE) |
 		MMCI_BIT(RINDE) | MMCI_BIT(RTOE));

 	/* Default Flags for the Command */
 	cmdr |= MMCI_BIT(MAXLAT);

 	if (data) {
 		cmdr |= MMCI_BF(TRCMD, 1);
 		if (data->blocks > 1)
 			cmdr |= MMCI_BF(TRTYP, 1);
 		if (data->flags & MMC_DATA_READ)
 			cmdr |= MMCI_BIT(TRDIR);
 	}

 	if (cmd->resp_type & MMC_RSP_CRC)
 		*error_flags |= MMCI_BIT(RCRCE);
 	if (cmd->resp_type & MMC_RSP_136)
 		cmdr |= MMCI_BF(RSPTYP, 2);
 	else if (cmd->resp_type & MMC_RSP_BUSY)
 		cmdr |= MMCI_BF(RSPTYP, 3);
 	else if (cmd->resp_type & MMC_RSP_PRESENT)
 		cmdr |= MMCI_BF(RSPTYP, 1);

 	return cmdr | MMCI_BF(CMDNB, cmd->cmdidx);
 }

 /* Entered into function pointer in mci_send_cmd */
 static u32 mci_data_read(atmel_mci_t *mci, u32* data, u32 error_flags)
 {
 	u32 status;

 	do {
 		status = readl(&mci->sr);
 		if (status & (error_flags | MMCI_BIT(OVRE)))
 			goto io_fail;
 	} while (!(status & MMCI_BIT(RXRDY)));

 	if (status & MMCI_BIT(RXRDY)) {
 		*data = readl(&mci->rdr);
 		status = 0;
 	}
 io_fail:
 	return status;
 }

 /* Entered into function pointer in mci_send_cmd */
 static u32 mci_data_write(atmel_mci_t *mci, u32* data, u32 error_flags)
 {
 	u32 status;

 	do {
 		status = readl(&mci->sr);
 		if (status & (error_flags | MMCI_BIT(UNRE)))
 			goto io_fail;
 	} while (!(status & MMCI_BIT(TXRDY)));

 	if (status & MMCI_BIT(TXRDY)) {
 		writel(*data, &mci->tdr);
 		status = 0;
 	}
 io_fail:
 	return status;
 }

 /*
  * Entered into mmc structure during driver init
  *
  * Sends a command out on the bus and deals with the block data.
  * Takes the mmc pointer, a command pointer, and an optional data pointer.
  */
 static int
 mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 {
 	atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;
 	u32 cmdr;
 	u32 error_flags = 0;
 	u32 status;

 	if (!initialized) {
 		puts ("MCI not initialized!\n");
 		return COMM_ERR;
 	}

 	/* Figure out the transfer arguments */
 	cmdr = mci_encode_cmd(cmd, data, &error_flags);

 	/* Send the command */
 	writel(cmd->cmdarg, &mci->argr);
 	writel(cmdr, &mci->cmdr);

 #ifdef DEBUG
 	dump_cmd(cmdr, cmd->cmdarg, 0, "DEBUG");
 #endif

 	/* Wait for the command to complete */
 	while (!((status = readl(&mci->sr)) & MMCI_BIT(CMDRDY)));

 	if (status & error_flags) {
 		dump_cmd(cmdr, cmd->cmdarg, status, "Command Failed");
 		return COMM_ERR;
 	}

 	/* Copy the response to the response buffer */
 	if (cmd->resp_type & MMC_RSP_136) {
 		cmd->response[0] = readl(&mci->rspr);
 		cmd->response[1] = readl(&mci->rspr1);
 		cmd->response[2] = readl(&mci->rspr2);
 		cmd->response[3] = readl(&mci->rspr3);
 	} else
 		cmd->response[0] = readl(&mci->rspr);

 	/* transfer all of the blocks */
 	if (data) {
 		u32 word_count, block_count;
 		u32* ioptr;
 		u32 sys_blocksize, dummy, i;
 		u32 (*mci_data_op)
 			(atmel_mci_t *mci, u32* data, u32 error_flags);

 		if (data->flags & MMC_DATA_READ) {
 			mci_data_op = mci_data_read;
 			sys_blocksize = mmc->read_bl_len;
 			ioptr = (u32*)data->dest;
 		} else {
 			mci_data_op = mci_data_write;
 			sys_blocksize = mmc->write_bl_len;
 			ioptr = (u32*)data->src;
 		}

 		status = 0;
 		for (block_count = 0;
 				block_count < data->blocks && !status;
 				block_count++) {
 			word_count = 0;
 			do {
 				status = mci_data_op(mci, ioptr, error_flags);
 				word_count++;
 				ioptr++;
 			} while (!status && word_count < (data->blocksize/4));
 #ifdef DEBUG
 			if (data->flags & MMC_DATA_READ)
 			{
 				printf("Read Data:\n");
 				print_buffer(0, data->dest, 1,
 					word_count*4, 0);
 			}
 #endif
 #ifdef DEBUG
 			if (!status && word_count < (sys_blocksize / 4))
 				printf("filling rest of block...\n");
 #endif
 			/* fill the rest of a full block */
 			while (!status && word_count < (sys_blocksize / 4)) {
 				status = mci_data_op(mci, &dummy,
 					error_flags);
 				word_count++;
 			}
 			if (status) {
 				dump_cmd(cmdr, cmd->cmdarg, status,
 					"Data Transfer Failed");
 				return COMM_ERR;
 			}
 		}

 		/* Wait for Transfer End */
 		i = 0;
 		do {
 			status = readl(&mci->sr);

 			if (status & error_flags) {
 				dump_cmd(cmdr, cmd->cmdarg, status,
 					"DTIP Wait Failed");
 				return COMM_ERR;
 			}
 			i++;
 		} while ((status & MMCI_BIT(DTIP)) && i < 10000);
 		if (status & MMCI_BIT(DTIP)) {
 			dump_cmd(cmdr, cmd->cmdarg, status,
 				"XFER DTIP never unset, ignoring");
 		}
 	}

 	return 0;
 }

 /* Entered into mmc structure during driver init */
 static void mci_set_ios(struct mmc *mmc)
 {
 	atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;
 	int busw = (mmc->bus_width == 4) ? 1 : 0;

 	/* Set the clock speed */
 	mci_set_mode(mmc, mmc->clock, MMC_DEFAULT_BLKLEN);

 	/*
 	 * set the bus width and select slot for this interface
 	 * there is no capability for multiple slots on the same interface yet
 	 * Bitfield SCDBUS needs to be expanded to 2 bits for 8-bit buses
 	 */
 	writel(MMCI_BF(SCDBUS, busw) | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
 }

 /* Entered into mmc structure during driver init */
 static int mci_init(struct mmc *mmc)
 {
 	atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;

 	/* Initialize controller */
 	writel(MMCI_BIT(SWRST), &mci->cr);	/* soft reset */
 	writel(MMCI_BIT(PWSDIS), &mci->cr);	/* disable power save */
 	writel(MMCI_BIT(MCIEN), &mci->cr);	/* enable mci */
 	writel(MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);	/* select port */

 	/* Initial Time-outs */
 	writel(0x5f, &mci->dtor);
 	/* Disable Interrupts */
 	writel(~0UL, &mci->idr);

 	/* Set default clocks and blocklen */
 	mci_set_mode(mmc, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);

 	return 0;
 }

 /*
  * This is the only exported function
  *
  * Call it with the MCI register base address
  */
 int atmel_mci_init(void *regs)
 {
 	struct mmc *mmc = malloc(sizeof(struct mmc));

 	if (!mmc)
 		return -1;
 	strcpy(mmc->name, "mci");
 	mmc->priv = regs;
 	mmc->send_cmd = mci_send_cmd;
 	mmc->set_ios = mci_set_ios;
 	mmc->init = mci_init;
 	mmc->getcd = NULL;

 	/* need to be able to pass these in on a board by board basis */
 	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
 	mmc->host_caps = MMC_MODE_4BIT;
 	/*
 	 * min and max frequencies determined by
 	 * max and min of clock divider
 	 */
 	mmc->f_min = get_mci_clk_rate() / (2*256);
 	mmc->f_max = get_mci_clk_rate() / (2*1);

 	mmc->b_max = 0;

 	mmc_register(mmc);

 	return 0;
 }
	/*
	* Copyright (C) 2010
	* Rob Emanuele <rob@emanuele.us>
	* Reinhard Meyer, EMK Elektronik <reinhard.meyer@emk-elektronik.de>
	*
	* Original Driver:
	* Copyright (C) 2004-2006 Atmel Corporation
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <mmc.h>
	#include <part.h>
	#include <malloc.h>
	#include <asm/io.h>
	#include <asm/errno.h>
	#include <asm/byteorder.h>
	#include <asm/arch/clk.h>
	#include <asm/arch/hardware.h>
	#include "atmel_mci.h"

	#ifndef CONFIG_SYS_MMC_CLK_OD
	# define CONFIG_SYS_MMC_CLK_OD 150000
	#endif

	#define MMC_DEFAULT_BLKLEN 512

	#if defined(CONFIG_ATMEL_MCI_PORTB)
	# define MCI_BUS 1
	#else
	# define MCI_BUS 0
	#endif

	static int initialized = 0;

	/*
	* Print command and status:
	*
	* - always when DEBUG is defined
	* - on command errors
	*/
	static void dump_cmd(u32 cmdr, u32 arg, u32 status, const char* msg)
	{
	printf("gen_atmel_mci: CMDR %08x (%2u) ARGR %08x (SR: %08x) %s\n",
	cmdr, cmdr&0x3F, arg, status, msg);
	}

	/* Setup for MCI Clock and Block Size */
	static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen)
	{
	atmel_mci_t mci = (atmel_mci_t )mmc->priv;
	u32 bus_hz = get_mci_clk_rate();
	u32 clkdiv = 255;

	debug("mci: bus_hz is %u, setting clock %u Hz, block size %u\n",
	bus_hz, hz, blklen);
	if (hz > 0) {
	/* find lowest clkdiv yielding a rate <= than requested */
	for (clkdiv=0; clkdiv<255; clkdiv++) {
	if ((bus_hz / (clkdiv+1) / 2) <= hz)
	break;
	}
	}
	printf("mci: setting clock %u Hz, block size %u\n",
	(bus_hz / (clkdiv+1)) / 2, blklen);

	blklen &= 0xfffc;
	/* On some platforms RDPROOF and WRPROOF are ignored */
	writel((MMCI_BF(CLKDIV, clkdiv)
	\| MMCI_BF(BLKLEN, blklen)
	\| MMCI_BIT(RDPROOF)
	\| MMCI_BIT(WRPROOF)), &mci->mr);
	initialized = 1;
	}

	/* Return the CMDR with flags for a given command and data packet */
	static u32 mci_encode_cmd(
	struct mmc_cmd cmd, struct mmc_data data, u32* error_flags)
	{
	u32 cmdr = 0;

	/* Default Flags for Errors */
	*error_flags \|= (MMCI_BIT(DTOE) \| MMCI_BIT(RDIRE) \| MMCI_BIT(RENDE) \|
	MMCI_BIT(RINDE) \| MMCI_BIT(RTOE));

	/* Default Flags for the Command */
	cmdr \|= MMCI_BIT(MAXLAT);

	if (data) {
	cmdr \|= MMCI_BF(TRCMD, 1);
	if (data->blocks > 1)
	cmdr \|= MMCI_BF(TRTYP, 1);
	if (data->flags & MMC_DATA_READ)
	cmdr \|= MMCI_BIT(TRDIR);
	}

	if (cmd->resp_type & MMC_RSP_CRC)
	*error_flags \|= MMCI_BIT(RCRCE);
	if (cmd->resp_type & MMC_RSP_136)
	cmdr \|= MMCI_BF(RSPTYP, 2);
	else if (cmd->resp_type & MMC_RSP_BUSY)
	cmdr \|= MMCI_BF(RSPTYP, 3);
	else if (cmd->resp_type & MMC_RSP_PRESENT)
	cmdr \|= MMCI_BF(RSPTYP, 1);

	return cmdr \| MMCI_BF(CMDNB, cmd->cmdidx);
	}

	/* Entered into function pointer in mci_send_cmd */
	static u32 mci_data_read(atmel_mci_t mci, u32 data, u32 error_flags)
	{
	u32 status;

	do {
	status = readl(&mci->sr);
	if (status & (error_flags \| MMCI_BIT(OVRE)))
	goto io_fail;
	} while (!(status & MMCI_BIT(RXRDY)));

	if (status & MMCI_BIT(RXRDY)) {
	*data = readl(&mci->rdr);
	status = 0;
	}
	io_fail:
	return status;
	}

	/* Entered into function pointer in mci_send_cmd */
	static u32 mci_data_write(atmel_mci_t mci, u32 data, u32 error_flags)
	{
	u32 status;

	do {
	status = readl(&mci->sr);
	if (status & (error_flags \| MMCI_BIT(UNRE)))
	goto io_fail;
	} while (!(status & MMCI_BIT(TXRDY)));

	if (status & MMCI_BIT(TXRDY)) {
	writel(*data, &mci->tdr);
	status = 0;
	}
	io_fail:
	return status;
	}

	/*
	* Entered into mmc structure during driver init
	*
	* Sends a command out on the bus and deals with the block data.
	* Takes the mmc pointer, a command pointer, and an optional data pointer.
	*/
	static int
	mci_send_cmd(struct mmc mmc, struct mmc_cmd cmd, struct mmc_data *data)
	{
	atmel_mci_t mci = (atmel_mci_t )mmc->priv;
	u32 cmdr;
	u32 error_flags = 0;
	u32 status;

	if (!initialized) {
	puts ("MCI not initialized!\n");
	return COMM_ERR;
	}

	/* Figure out the transfer arguments */
	cmdr = mci_encode_cmd(cmd, data, &error_flags);

	/* Send the command */
	writel(cmd->cmdarg, &mci->argr);
	writel(cmdr, &mci->cmdr);

	#ifdef DEBUG
	dump_cmd(cmdr, cmd->cmdarg, 0, "DEBUG");
	#endif

	/* Wait for the command to complete */
	while (!((status = readl(&mci->sr)) & MMCI_BIT(CMDRDY)));

	if (status & error_flags) {
	dump_cmd(cmdr, cmd->cmdarg, status, "Command Failed");
	return COMM_ERR;
	}

	/* Copy the response to the response buffer */
	if (cmd->resp_type & MMC_RSP_136) {
	cmd->response[0] = readl(&mci->rspr);
	cmd->response[1] = readl(&mci->rspr1);
	cmd->response[2] = readl(&mci->rspr2);
	cmd->response[3] = readl(&mci->rspr3);
	} else
	cmd->response[0] = readl(&mci->rspr);

	/* transfer all of the blocks */
	if (data) {
	u32 word_count, block_count;
	u32* ioptr;
	u32 sys_blocksize, dummy, i;
	u32 (*mci_data_op)
	(atmel_mci_t mci, u32 data, u32 error_flags);

	if (data->flags & MMC_DATA_READ) {
	mci_data_op = mci_data_read;
	sys_blocksize = mmc->read_bl_len;
	ioptr = (u32*)data->dest;
	} else {
	mci_data_op = mci_data_write;
	sys_blocksize = mmc->write_bl_len;
	ioptr = (u32*)data->src;
	}

	status = 0;
	for (block_count = 0;
	block_count < data->blocks && !status;
	block_count++) {
	word_count = 0;
	do {
	status = mci_data_op(mci, ioptr, error_flags);
	word_count++;
	ioptr++;
	} while (!status && word_count < (data->blocksize/4));
	#ifdef DEBUG
	if (data->flags & MMC_DATA_READ)
	{
	printf("Read Data:\n");
	print_buffer(0, data->dest, 1,
	word_count*4, 0);
	}
	#endif
	#ifdef DEBUG
	if (!status && word_count < (sys_blocksize / 4))
	printf("filling rest of block...\n");
	#endif
	/* fill the rest of a full block */
	while (!status && word_count < (sys_blocksize / 4)) {
	status = mci_data_op(mci, &dummy,
	error_flags);
	word_count++;
	}
	if (status) {
	dump_cmd(cmdr, cmd->cmdarg, status,
	"Data Transfer Failed");
	return COMM_ERR;
	}
	}

	/* Wait for Transfer End */
	i = 0;
	do {
	status = readl(&mci->sr);

	if (status & error_flags) {
	dump_cmd(cmdr, cmd->cmdarg, status,
	"DTIP Wait Failed");
	return COMM_ERR;
	}
	i++;
	} while ((status & MMCI_BIT(DTIP)) && i < 10000);
	if (status & MMCI_BIT(DTIP)) {
	dump_cmd(cmdr, cmd->cmdarg, status,
	"XFER DTIP never unset, ignoring");
	}
	}

	return 0;
	}

	/* Entered into mmc structure during driver init */
	static void mci_set_ios(struct mmc *mmc)
	{
	atmel_mci_t mci = (atmel_mci_t )mmc->priv;
	int busw = (mmc->bus_width == 4) ? 1 : 0;

	/* Set the clock speed */
	mci_set_mode(mmc, mmc->clock, MMC_DEFAULT_BLKLEN);

	/*
	* set the bus width and select slot for this interface
	* there is no capability for multiple slots on the same interface yet
	* Bitfield SCDBUS needs to be expanded to 2 bits for 8-bit buses
	*/
	writel(MMCI_BF(SCDBUS, busw) \| MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
	}

	/* Entered into mmc structure during driver init */
	static int mci_init(struct mmc *mmc)
	{
	atmel_mci_t mci = (atmel_mci_t )mmc->priv;

	/* Initialize controller */
	writel(MMCI_BIT(SWRST), &mci->cr); /* soft reset */
	writel(MMCI_BIT(PWSDIS), &mci->cr); /* disable power save */
	writel(MMCI_BIT(MCIEN), &mci->cr); /* enable mci */
	writel(MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr); /* select port */

	/* Initial Time-outs */
	writel(0x5f, &mci->dtor);
	/* Disable Interrupts */
	writel(~0UL, &mci->idr);

	/* Set default clocks and blocklen */
	mci_set_mode(mmc, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);

	return 0;
	}

	/*
	* This is the only exported function
	*
	* Call it with the MCI register base address
	*/
	int atmel_mci_init(void *regs)
	{
	struct mmc *mmc = malloc(sizeof(struct mmc));

	if (!mmc)
	return -1;
	strcpy(mmc->name, "mci");
	mmc->priv = regs;
	mmc->send_cmd = mci_send_cmd;
	mmc->set_ios = mci_set_ios;
	mmc->init = mci_init;
	mmc->getcd = NULL;

	/* need to be able to pass these in on a board by board basis */
	mmc->voltages = MMC_VDD_32_33 \| MMC_VDD_33_34;
	mmc->host_caps = MMC_MODE_4BIT;
	/*
	* min and max frequencies determined by
	* max and min of clock divider
	*/
	mmc->f_min = get_mci_clk_rate() / (2*256);
	mmc->f_max = get_mci_clk_rate() / (2*1);

	mmc->b_max = 0;

	mmc_register(mmc);

	return 0;
	}