| /* |
| * Copyright (C) 2016 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <reset-uclass.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| #include <linux/sizes.h> |
| |
| struct uniphier_reset_data { |
| unsigned int id; |
| unsigned int reg; |
| unsigned int bit; |
| unsigned int flags; |
| #define UNIPHIER_RESET_ACTIVE_LOW BIT(0) |
| }; |
| |
| #define UNIPHIER_RESET_ID_END (unsigned int)(-1) |
| |
| #define UNIPHIER_RESET_END \ |
| { .id = UNIPHIER_RESET_ID_END } |
| |
| #define UNIPHIER_RESET(_id, _reg, _bit) \ |
| { \ |
| .id = (_id), \ |
| .reg = (_reg), \ |
| .bit = (_bit), \ |
| } |
| |
| #define UNIPHIER_RESETX(_id, _reg, _bit) \ |
| { \ |
| .id = (_id), \ |
| .reg = (_reg), \ |
| .bit = (_bit), \ |
| .flags = UNIPHIER_RESET_ACTIVE_LOW, \ |
| } |
| |
| /* System reset data */ |
| static const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = { |
| UNIPHIER_RESETX(2, 0x2000, 2), /* NAND */ |
| UNIPHIER_RESETX(8, 0x2000, 10), /* STDMAC */ |
| UNIPHIER_RESETX(12, 0x2000, 6), /* GIO */ |
| UNIPHIER_RESETX(14, 0x2000, 17), /* USB30 */ |
| UNIPHIER_RESETX(15, 0x2004, 17), /* USB31 */ |
| UNIPHIER_RESET_END, |
| }; |
| |
| static const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = { |
| UNIPHIER_RESETX(2, 0x2000, 2), /* NAND */ |
| UNIPHIER_RESETX(8, 0x2000, 10), /* STDMAC */ |
| UNIPHIER_RESETX(14, 0x2000, 17), /* USB30 */ |
| UNIPHIER_RESETX(15, 0x2004, 17), /* USB31 */ |
| UNIPHIER_RESETX(16, 0x2014, 4), /* USB30-PHY0 */ |
| UNIPHIER_RESETX(17, 0x2014, 0), /* USB30-PHY1 */ |
| UNIPHIER_RESETX(18, 0x2014, 2), /* USB30-PHY2 */ |
| UNIPHIER_RESETX(20, 0x2014, 5), /* USB31-PHY0 */ |
| UNIPHIER_RESETX(21, 0x2014, 1), /* USB31-PHY1 */ |
| UNIPHIER_RESETX(28, 0x2014, 12), /* SATA */ |
| UNIPHIER_RESET(29, 0x2014, 8), /* SATA-PHY (active high) */ |
| UNIPHIER_RESET_END, |
| }; |
| |
| static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = { |
| UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */ |
| UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */ |
| UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC */ |
| UNIPHIER_RESETX(12, 0x200c, 5), /* GIO */ |
| UNIPHIER_RESETX(16, 0x200c, 12), /* USB30-PHY0 */ |
| UNIPHIER_RESETX(17, 0x200c, 13), /* USB30-PHY1 */ |
| UNIPHIER_RESETX(18, 0x200c, 14), /* USB30-PHY2 */ |
| UNIPHIER_RESETX(19, 0x200c, 15), /* USB30-PHY3 */ |
| UNIPHIER_RESET_END, |
| }; |
| |
| static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = { |
| UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */ |
| UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */ |
| UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */ |
| UNIPHIER_RESETX(12, 0x200c, 5), /* USB30 (GIO0) */ |
| UNIPHIER_RESETX(13, 0x200c, 6), /* USB31 (GIO1) */ |
| UNIPHIER_RESETX(16, 0x200c, 16), /* USB30-PHY */ |
| UNIPHIER_RESETX(20, 0x200c, 17), /* USB31-PHY */ |
| UNIPHIER_RESET_END, |
| }; |
| |
| /* Media I/O reset data */ |
| #define UNIPHIER_MIO_RESET_SD(id, ch) \ |
| UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0) |
| |
| #define UNIPHIER_MIO_RESET_SD_BRIDGE(id, ch) \ |
| UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 26) |
| |
| #define UNIPHIER_MIO_RESET_EMMC_HW_RESET(id, ch) \ |
| UNIPHIER_RESETX((id), 0x80 + 0x200 * (ch), 0) |
| |
| #define UNIPHIER_MIO_RESET_USB2(id, ch) \ |
| UNIPHIER_RESETX((id), 0x114 + 0x200 * (ch), 0) |
| |
| #define UNIPHIER_MIO_RESET_USB2_BRIDGE(id, ch) \ |
| UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 24) |
| |
| #define UNIPHIER_MIO_RESET_DMAC(id) \ |
| UNIPHIER_RESETX((id), 0x110, 17) |
| |
| static const struct uniphier_reset_data uniphier_mio_reset_data[] = { |
| UNIPHIER_MIO_RESET_SD(0, 0), |
| UNIPHIER_MIO_RESET_SD(1, 1), |
| UNIPHIER_MIO_RESET_SD(2, 2), |
| UNIPHIER_MIO_RESET_SD_BRIDGE(3, 0), |
| UNIPHIER_MIO_RESET_SD_BRIDGE(4, 1), |
| UNIPHIER_MIO_RESET_SD_BRIDGE(5, 2), |
| UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1), |
| UNIPHIER_MIO_RESET_DMAC(7), |
| UNIPHIER_MIO_RESET_USB2(8, 0), |
| UNIPHIER_MIO_RESET_USB2(9, 1), |
| UNIPHIER_MIO_RESET_USB2(10, 2), |
| UNIPHIER_MIO_RESET_USB2(11, 3), |
| UNIPHIER_MIO_RESET_USB2_BRIDGE(12, 0), |
| UNIPHIER_MIO_RESET_USB2_BRIDGE(13, 1), |
| UNIPHIER_MIO_RESET_USB2_BRIDGE(14, 2), |
| UNIPHIER_MIO_RESET_USB2_BRIDGE(15, 3), |
| UNIPHIER_RESET_END, |
| }; |
| |
| /* Peripheral reset data */ |
| #define UNIPHIER_PERI_RESET_UART(id, ch) \ |
| UNIPHIER_RESETX((id), 0x114, 19 + (ch)) |
| |
| #define UNIPHIER_PERI_RESET_I2C(id, ch) \ |
| UNIPHIER_RESETX((id), 0x114, 5 + (ch)) |
| |
| #define UNIPHIER_PERI_RESET_FI2C(id, ch) \ |
| UNIPHIER_RESETX((id), 0x114, 24 + (ch)) |
| |
| static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = { |
| UNIPHIER_PERI_RESET_UART(0, 0), |
| UNIPHIER_PERI_RESET_UART(1, 1), |
| UNIPHIER_PERI_RESET_UART(2, 2), |
| UNIPHIER_PERI_RESET_UART(3, 3), |
| UNIPHIER_PERI_RESET_I2C(4, 0), |
| UNIPHIER_PERI_RESET_I2C(5, 1), |
| UNIPHIER_PERI_RESET_I2C(6, 2), |
| UNIPHIER_PERI_RESET_I2C(7, 3), |
| UNIPHIER_PERI_RESET_I2C(8, 4), |
| UNIPHIER_RESET_END, |
| }; |
| |
| static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = { |
| UNIPHIER_PERI_RESET_UART(0, 0), |
| UNIPHIER_PERI_RESET_UART(1, 1), |
| UNIPHIER_PERI_RESET_UART(2, 2), |
| UNIPHIER_PERI_RESET_UART(3, 3), |
| UNIPHIER_PERI_RESET_FI2C(4, 0), |
| UNIPHIER_PERI_RESET_FI2C(5, 1), |
| UNIPHIER_PERI_RESET_FI2C(6, 2), |
| UNIPHIER_PERI_RESET_FI2C(7, 3), |
| UNIPHIER_PERI_RESET_FI2C(8, 4), |
| UNIPHIER_PERI_RESET_FI2C(9, 5), |
| UNIPHIER_PERI_RESET_FI2C(10, 6), |
| UNIPHIER_RESET_END, |
| }; |
| |
| /* core implementaton */ |
| struct uniphier_reset_priv { |
| void __iomem *base; |
| const struct uniphier_reset_data *data; |
| }; |
| |
| static int uniphier_reset_request(struct reset_ctl *reset_ctl) |
| { |
| return 0; |
| } |
| |
| static int uniphier_reset_free(struct reset_ctl *reset_ctl) |
| { |
| return 0; |
| } |
| |
| static int uniphier_reset_update(struct reset_ctl *reset_ctl, int assert) |
| { |
| struct uniphier_reset_priv *priv = dev_get_priv(reset_ctl->dev); |
| unsigned long id = reset_ctl->id; |
| const struct uniphier_reset_data *p; |
| |
| for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) { |
| u32 mask, val; |
| |
| if (p->id != id) |
| continue; |
| |
| val = readl(priv->base + p->reg); |
| |
| if (p->flags & UNIPHIER_RESET_ACTIVE_LOW) |
| assert = !assert; |
| |
| mask = BIT(p->bit); |
| |
| if (assert) |
| val |= mask; |
| else |
| val &= ~mask; |
| |
| writel(val, priv->base + p->reg); |
| |
| return 0; |
| } |
| |
| dev_err(priv->dev, "reset_id=%lu was not handled\n", id); |
| return -EINVAL; |
| } |
| |
| static int uniphier_reset_assert(struct reset_ctl *reset_ctl) |
| { |
| return uniphier_reset_update(reset_ctl, 1); |
| } |
| |
| static int uniphier_reset_deassert(struct reset_ctl *reset_ctl) |
| { |
| return uniphier_reset_update(reset_ctl, 0); |
| } |
| |
| static const struct reset_ops uniphier_reset_ops = { |
| .request = uniphier_reset_request, |
| .free = uniphier_reset_free, |
| .rst_assert = uniphier_reset_assert, |
| .rst_deassert = uniphier_reset_deassert, |
| }; |
| |
| static int uniphier_reset_probe(struct udevice *dev) |
| { |
| struct uniphier_reset_priv *priv = dev_get_priv(dev); |
| fdt_addr_t addr; |
| |
| addr = devfdt_get_addr(dev->parent); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| priv->base = devm_ioremap(dev, addr, SZ_4K); |
| if (!priv->base) |
| return -ENOMEM; |
| |
| priv->data = (void *)dev_get_driver_data(dev); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id uniphier_reset_match[] = { |
| /* System reset */ |
| { |
| .compatible = "socionext,uniphier-ld4-reset", |
| .data = (ulong)uniphier_pro4_sys_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pro4-reset", |
| .data = (ulong)uniphier_pro4_sys_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-sld8-reset", |
| .data = (ulong)uniphier_pro4_sys_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pro5-reset", |
| .data = (ulong)uniphier_pro4_sys_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs2-reset", |
| .data = (ulong)uniphier_pxs2_sys_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-ld11-reset", |
| .data = (ulong)uniphier_ld20_sys_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-ld20-reset", |
| .data = (ulong)uniphier_ld20_sys_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs3-reset", |
| .data = (ulong)uniphier_pxs3_sys_reset_data, |
| }, |
| /* Media I/O reset */ |
| { |
| .compatible = "socionext,uniphier-ld4-mio-reset", |
| .data = (ulong)uniphier_mio_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pro4-mio-reset", |
| .data = (ulong)uniphier_mio_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-sld8-mio-reset", |
| .data = (ulong)uniphier_mio_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pro5-mio-reset", |
| .data = (ulong)uniphier_mio_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs2-mio-reset", |
| .data = (ulong)uniphier_mio_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-ld11-mio-reset", |
| .data = (ulong)uniphier_mio_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-ld11-sd-reset", |
| .data = (ulong)uniphier_mio_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-ld20-sd-reset", |
| .data = (ulong)uniphier_mio_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs3-sd-reset", |
| .data = (ulong)uniphier_mio_reset_data, |
| }, |
| /* Peripheral reset */ |
| { |
| .compatible = "socionext,uniphier-ld4-peri-reset", |
| .data = (ulong)uniphier_ld4_peri_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pro4-peri-reset", |
| .data = (ulong)uniphier_pro4_peri_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-sld8-peri-reset", |
| .data = (ulong)uniphier_ld4_peri_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pro5-peri-reset", |
| .data = (ulong)uniphier_pro4_peri_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs2-peri-reset", |
| .data = (ulong)uniphier_pro4_peri_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-ld11-peri-reset", |
| .data = (ulong)uniphier_pro4_peri_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-ld20-peri-reset", |
| .data = (ulong)uniphier_pro4_peri_reset_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs3-peri-reset", |
| .data = (ulong)uniphier_pro4_peri_reset_data, |
| }, |
| { /* sentinel */ } |
| }; |
| |
| U_BOOT_DRIVER(uniphier_reset) = { |
| .name = "uniphier-reset", |
| .id = UCLASS_RESET, |
| .of_match = uniphier_reset_match, |
| .probe = uniphier_reset_probe, |
| .priv_auto_alloc_size = sizeof(struct uniphier_reset_priv), |
| .ops = &uniphier_reset_ops, |
| }; |