| /* |
| * (C) Copyright 2013 - 2015 Xilinx, Inc. |
| * |
| * Xilinx Zynq SD Host Controller Interface |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <clk.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <libfdt.h> |
| #include <malloc.h> |
| #include <sdhci.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifndef CONFIG_ZYNQ_SDHCI_MIN_FREQ |
| # define CONFIG_ZYNQ_SDHCI_MIN_FREQ 0 |
| #endif |
| |
| struct arasan_sdhci_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| unsigned int f_max; |
| }; |
| |
| static int arasan_sdhci_probe(struct udevice *dev) |
| { |
| struct arasan_sdhci_plat *plat = dev_get_platdata(dev); |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct sdhci_host *host = dev_get_priv(dev); |
| struct clk clk; |
| unsigned long clock; |
| int ret; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret < 0) { |
| dev_err(dev, "failed to get clock\n"); |
| return ret; |
| } |
| |
| clock = clk_get_rate(&clk); |
| if (IS_ERR_VALUE(clock)) { |
| dev_err(dev, "failed to get rate\n"); |
| return clock; |
| } |
| debug("%s: CLK %ld\n", __func__, clock); |
| |
| ret = clk_enable(&clk); |
| if (ret && ret != -ENOSYS) { |
| dev_err(dev, "failed to enable clock\n"); |
| return ret; |
| } |
| |
| host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | |
| SDHCI_QUIRK_BROKEN_R1B; |
| |
| #ifdef CONFIG_ZYNQ_HISPD_BROKEN |
| host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT; |
| #endif |
| |
| host->max_clk = clock; |
| |
| ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max, |
| CONFIG_ZYNQ_SDHCI_MIN_FREQ); |
| host->mmc = &plat->mmc; |
| if (ret) |
| return ret; |
| host->mmc->priv = host; |
| host->mmc->dev = dev; |
| upriv->mmc = host->mmc; |
| |
| return sdhci_probe(dev); |
| } |
| |
| static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct arasan_sdhci_plat *plat = dev_get_platdata(dev); |
| struct sdhci_host *host = dev_get_priv(dev); |
| |
| host->name = dev->name; |
| host->ioaddr = (void *)devfdt_get_addr(dev); |
| |
| plat->f_max = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), |
| "max-frequency", CONFIG_ZYNQ_SDHCI_MAX_FREQ); |
| |
| return 0; |
| } |
| |
| static int arasan_sdhci_bind(struct udevice *dev) |
| { |
| struct arasan_sdhci_plat *plat = dev_get_platdata(dev); |
| |
| return sdhci_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| static const struct udevice_id arasan_sdhci_ids[] = { |
| { .compatible = "arasan,sdhci-8.9a" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(arasan_sdhci_drv) = { |
| .name = "arasan_sdhci", |
| .id = UCLASS_MMC, |
| .of_match = arasan_sdhci_ids, |
| .ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata, |
| .ops = &sdhci_ops, |
| .bind = arasan_sdhci_bind, |
| .probe = arasan_sdhci_probe, |
| .priv_auto_alloc_size = sizeof(struct sdhci_host), |
| .platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat), |
| }; |