blob: a6792a0e2726a72784dd8685ccca8782cbe1f3b0 [file] [log] [blame]
/*
* (C) Copyright 2008
* Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
* mpc512x I/O pin/pad initialization for the ADS5121 board
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <linux/types.h>
#include "iopin.h"
/* IO pin fields */
#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
#define IO_PIN_DS(v) ((v)) /* slew rate */
static struct iopin_t {
int p_offset; /* offset from IOCTL_MEM_OFFSET */
int nr_pins; /* number of pins to set this way */
int bit_or; /* or in the value instead of overwrite */
u_long val; /* value to write or or */
} ioregs_init[] = {
/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
{
IOCTL_SPDIF_TXCLK, 3, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* Set highest Slew on 9 PATA pins */
{
IOCTL_PATA_CE1, 9, 1,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
{
IOCTL_PSC0_0, 15, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=SPDIF_TXCLK */
{
IOCTL_LPC_CS1, 1, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
},
/* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
{
IOCTL_I2C1_SCL, 2, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
},
/* FUNC2=DIU CLK */
{
IOCTL_PSC6_0, 1, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
},
/* FUNC2=DIU_HSYNC */
{
IOCTL_PSC6_1, 1, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
{
IOCTL_PSC6_4, 26, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
}
};
void iopin_initialize(void)
{
short i, j, n, p;
u_long *reg;
immap_t *im = (immap_t *)CFG_IMMR;
reg = (u_long *)&(im->io_ctrl.regs[0]);
if (sizeof(ioregs_init) == 0)
return;
n = sizeof(ioregs_init) / sizeof(ioregs_init[0]);
for (i = 0; i < n; i++) {
for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
p < ioregs_init[i].nr_pins; p++, j++) {
if (ioregs_init[i].bit_or)
reg[j] |= ioregs_init[i].val;
else
reg[j] = ioregs_init[i].val;
}
}
return;
}