| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2015 Freescale Semiconductor, Inc. |
| * |
| * The file use ls102xa/timer.c as a reference. |
| */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <time.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <div64.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/mach-imx/syscounter.h> |
| #include <linux/delay.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* |
| * This function is intended for SHORT delays only. |
| * It will overflow at around 10 seconds @ 400MHz, |
| * or 20 seconds @ 200MHz. |
| */ |
| unsigned long usec2ticks(unsigned long usec) |
| { |
| ulong ticks; |
| |
| if (usec < 1000) |
| ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000; |
| else |
| ticks = ((usec / 10) * (get_tbclk() / 100000)); |
| |
| return ticks; |
| } |
| |
| static inline unsigned long long tick_to_time(unsigned long long tick) |
| { |
| unsigned long freq; |
| |
| asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq)); |
| |
| tick *= CONFIG_SYS_HZ; |
| do_div(tick, freq); |
| |
| return tick; |
| } |
| |
| static inline unsigned long long us_to_tick(unsigned long long usec) |
| { |
| unsigned long freq; |
| |
| asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq)); |
| |
| usec = usec * freq + 999999; |
| do_div(usec, 1000000); |
| |
| return usec; |
| } |
| |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT |
| int timer_init(void) |
| { |
| struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR; |
| unsigned long val, freq; |
| |
| freq = CONFIG_SC_TIMER_CLK; |
| asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); |
| |
| writel(freq, &sctr->cntfid0); |
| |
| /* Enable system counter */ |
| val = readl(&sctr->cntcr); |
| val &= ~(SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1); |
| val |= SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG; |
| writel(val, &sctr->cntcr); |
| |
| gd->arch.tbl = 0; |
| gd->arch.tbu = 0; |
| |
| return 0; |
| } |
| #endif |
| |
| unsigned long long get_ticks(void) |
| { |
| unsigned long long now; |
| |
| asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (now)); |
| |
| gd->arch.tbl = (unsigned long)(now & 0xffffffff); |
| gd->arch.tbu = (unsigned long)(now >> 32); |
| |
| return now; |
| } |
| |
| ulong get_timer(ulong base) |
| { |
| return tick_to_time(get_ticks()) - base; |
| } |
| |
| void __udelay(unsigned long usec) |
| { |
| unsigned long long tmp; |
| ulong tmo; |
| |
| tmo = us_to_tick(usec); |
| tmp = get_ticks() + tmo; /* get current timestamp */ |
| |
| while (get_ticks() < tmp) /* loop till event */ |
| /*NOP*/; |
| } |
| |
| /* |
| * This function is derived from PowerPC code (timebase clock frequency). |
| * On ARM it returns the number of timer ticks per second. |
| */ |
| ulong get_tbclk(void) |
| { |
| unsigned long freq; |
| |
| asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq)); |
| |
| return freq; |
| } |