CONFIG_ARM=y | |
CONFIG_ARCH_AT91=y | |
CONFIG_SYS_TEXT_BASE=0x26f00000 | |
CONFIG_TARGET_AT91SAM9X5EK=y | |
CONFIG_SYS_MALLOC_F_LEN=0x2000 | |
CONFIG_NR_DRAM_BANKS=1 | |
CONFIG_DEBUG_UART_BOARD_INIT=y | |
CONFIG_DEBUG_UART_BASE=0xfffff200 | |
CONFIG_DEBUG_UART_CLOCK=132000000 | |
CONFIG_DEBUG_UART=y | |
CONFIG_FIT=y | |
CONFIG_SD_BOOT=y | |
CONFIG_BOOTDELAY=3 | |
CONFIG_USE_BOOTARGS=y | |
CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" | |
# CONFIG_CONSOLE_MUX is not set | |
CONFIG_SYS_CONSOLE_IS_IN_ENV=y | |
# CONFIG_DISPLAY_BOARDINFO is not set | |
CONFIG_HUSH_PARSER=y | |
CONFIG_SYS_PROMPT="U-Boot> " | |
CONFIG_CMD_BOOTZ=y | |
# CONFIG_CMD_FLASH is not set | |
CONFIG_CMD_MMC=y | |
CONFIG_CMD_NAND=y | |
CONFIG_CMD_NAND_TRIMFFS=y | |
CONFIG_CMD_SF=y | |
CONFIG_CMD_USB=y | |
# CONFIG_CMD_SETEXPR is not set | |
CONFIG_CMD_DHCP=y | |
CONFIG_CMD_PING=y | |
CONFIG_CMD_FAT=y | |
CONFIG_CMD_MTDPARTS=y | |
CONFIG_CMD_UBI=y | |
CONFIG_OF_CONTROL=y | |
CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek" | |
CONFIG_ENV_IS_IN_FAT=y | |
CONFIG_DM=y | |
CONFIG_CLK=y | |
CONFIG_CLK_AT91=y | |
CONFIG_DM_GPIO=y | |
CONFIG_AT91_GPIO=y | |
CONFIG_DM_MMC=y | |
CONFIG_GENERIC_ATMEL_MCI=y | |
CONFIG_NAND=y | |
CONFIG_NAND_ATMEL=y | |
CONFIG_DM_SPI_FLASH=y | |
CONFIG_SPI_FLASH=y | |
CONFIG_SF_DEFAULT_SPEED=30000000 | |
CONFIG_SPI_FLASH_ATMEL=y | |
CONFIG_DM_ETH=y | |
CONFIG_MACB=y | |
CONFIG_PINCTRL=y | |
CONFIG_PINCTRL_AT91=y | |
CONFIG_DM_SERIAL=y | |
CONFIG_DEBUG_UART_ATMEL=y | |
CONFIG_DEBUG_UART_ANNOUNCE=y | |
CONFIG_ATMEL_USART=y | |
CONFIG_SPI=y | |
CONFIG_DM_SPI=y | |
CONFIG_TIMER=y | |
CONFIG_ATMEL_PIT_TIMER=y | |
CONFIG_USB=y | |
CONFIG_DM_USB=y | |
CONFIG_USB_EHCI_HCD=y | |
CONFIG_USB_STORAGE=y | |
CONFIG_DM_VIDEO=y | |
CONFIG_ATMEL_HLCD=y |