| /* |
| * (C) Copyright 2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * (C) Copyright 2002 |
| * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de> |
| * (C) Copyright 2003 |
| * Kai-Uwe Bloem, Auerswald GmbH & Co KG, <linux-development@auerswald.de> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * Boot support |
| */ |
| #include <common.h> |
| #include <command.h> |
| #include <s_record.h> |
| #include <jffs2/load_kernel.h> |
| #include <net.h> |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) |
| |
| #include <cramfs/cramfs_fs.h> |
| |
| extern int cramfs_check (struct part_info *info); |
| extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename); |
| extern int cramfs_ls (struct part_info *info, char *filename); |
| extern int cramfs_info (struct part_info *info); |
| |
| static int part_num=0; |
| |
| #ifndef CFG_JFFS_CUSTOM_PART |
| |
| #define CFG_JFFS_SINGLE_PART 1 |
| |
| static struct part_info part; |
| |
| #ifndef CONFIG_JFFS2_NAND |
| |
| struct part_info* |
| jffs2_part_info(int part_num) |
| { |
| extern flash_info_t flash_info[]; /* info for FLASH chips */ |
| int i; |
| |
| if(part_num==0){ |
| |
| if(part.usr_priv==(void*)1) |
| return ∂ |
| |
| memset(&part, 0, sizeof(part)); |
| |
| #if defined(CFG_JFFS2_FIRST_SECTOR) |
| part.offset = (unsigned char *) flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR]; |
| #else |
| part.offset = (unsigned char *) flash_info[CFG_JFFS2_FIRST_BANK].start[0]; |
| #endif |
| |
| /* Figure out flash partition size */ |
| for (i = CFG_JFFS2_FIRST_BANK; i < CFG_JFFS2_NUM_BANKS+CFG_JFFS2_FIRST_BANK; i++) |
| part.size += flash_info[i].size; |
| |
| #if defined(CFG_JFFS2_FIRST_SECTOR) && (CFG_JFFS2_FIRST_SECTOR > 0) |
| part.size -= |
| flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR] - |
| flash_info[CFG_JFFS2_FIRST_BANK].start[0]; |
| #endif |
| |
| /* Mark the struct as ready */ |
| part.usr_priv=(void*)1; |
| |
| return ∂ |
| } |
| return 0; |
| } |
| |
| #else /* CONFIG_JFFS2_NAND */ |
| |
| struct part_info* |
| jffs2_part_info(int part_num) |
| { |
| if(part_num==0){ |
| |
| if(part.usr_priv==(void*)1) |
| return ∂ |
| |
| memset(&part, 0, sizeof(part)); |
| |
| part.offset = (char *)CONFIG_JFFS2_NAND_OFF; |
| part.size = CONFIG_JFFS2_NAND_SIZE; /* the bigger size the slower jffs2 */ |
| |
| #ifndef CONFIG_JFFS2_NAND_DEV |
| #define CONFIG_JFFS2_NAND_DEV 0 |
| #endif |
| /* nand device with the JFFS2 parition plus 1 */ |
| part.usr_priv = (void*)(CONFIG_JFFS2_NAND_DEV+1); |
| return ∂ |
| } |
| return 0; |
| } |
| |
| #endif /* CONFIG_JFFS2_NAND */ |
| #endif /* ifndef CFG_JFFS_CUSTOM_PART */ |
| |
| int |
| do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| struct part_info* jffs2_part_info(int); |
| int jffs2_1pass_load(char *, struct part_info *,const char *); |
| char *fsname; |
| char *filename; |
| int size; |
| struct part_info *part; |
| ulong offset = load_addr; |
| |
| /* pre-set Boot file name */ |
| if ((filename = getenv("bootfile")) == NULL) { |
| filename = "uImage"; |
| } |
| |
| if (argc == 2) { |
| filename = argv[1]; |
| } |
| if (argc == 3) { |
| offset = simple_strtoul(argv[1], NULL, 16); |
| load_addr = offset; |
| filename = argv[2]; |
| } |
| |
| if (0 != (part=jffs2_part_info(part_num))){ |
| |
| /* check partition type for cramfs */ |
| fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2"); |
| printf("### %s loading '%s' to 0x%lx\n", fsname, filename, offset); |
| |
| if (cramfs_check(part)) { |
| size = cramfs_load ((char *) offset, part, filename); |
| } else { |
| /* if this is not cramfs assume jffs2 */ |
| size = jffs2_1pass_load((char *)offset, part, filename); |
| } |
| |
| if (size > 0) { |
| char buf[10]; |
| printf("### %s load complete: %d bytes loaded to 0x%lx\n", |
| fsname, size, offset); |
| sprintf(buf, "%x", size); |
| setenv("filesize", buf); |
| } else { |
| printf("### %s LOAD ERROR<%x> for %s!\n", fsname, size, filename); |
| } |
| |
| return !(size > 0); |
| } |
| puts ("Active partition not valid\n"); |
| return 0; |
| } |
| |
| int |
| do_jffs2_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| struct part_info* jffs2_part_info(int); |
| int jffs2_1pass_ls(struct part_info *,char *); |
| char *filename = "/"; |
| int ret; |
| struct part_info *part; |
| |
| if (argc == 2) |
| filename = argv[1]; |
| |
| if (0 != (part=jffs2_part_info(part_num))){ |
| |
| /* check partition type for cramfs */ |
| if (cramfs_check(part)) { |
| ret = cramfs_ls (part, filename); |
| } else { |
| /* if this is not cramfs assume jffs2 */ |
| ret = jffs2_1pass_ls(part, filename); |
| } |
| |
| return (ret == 1); |
| } |
| puts ("Active partition not valid\n"); |
| return 0; |
| } |
| |
| int |
| do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| struct part_info* jffs2_part_info(int); |
| int jffs2_1pass_info(struct part_info *); |
| struct part_info *part; |
| char *fsname; |
| int ret; |
| |
| if ((part=jffs2_part_info(part_num))){ |
| |
| /* check partition type for cramfs */ |
| fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2"); |
| printf("### filesystem type is %s\n", fsname); |
| |
| if (cramfs_check(part)) { |
| ret = cramfs_info (part); |
| } else { |
| /* if this is not cramfs assume jffs2 */ |
| ret = jffs2_1pass_info(part); |
| } |
| |
| return (ret == 1); |
| } |
| puts ("Active partition not valid\n"); |
| return 0; |
| } |
| |
| #ifndef CFG_JFFS_SINGLE_PART |
| int |
| do_jffs2_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| int tmp_part; |
| char str_part_num[3]; |
| struct part_info* jffs2_part_info(int); |
| |
| if (argc >= 2) { |
| tmp_part = simple_strtoul(argv[1], NULL, 16); |
| } else { |
| puts ("Need partition number in argument list\n"); |
| return 0; |
| |
| } |
| |
| if (jffs2_part_info(tmp_part)){ |
| printf("Partition changed to %d\n",tmp_part); |
| part_num=tmp_part; |
| sprintf(str_part_num, "%d", part_num); |
| setenv("partition", str_part_num); |
| return 0; |
| } |
| |
| printf("Partition %d is not valid partiton\n",tmp_part); |
| return 0; |
| |
| } |
| |
| U_BOOT_CMD( |
| chpart, 2, 0, do_jffs2_chpart, |
| "chpart\t- change active partition\n", |
| " - change active partition\n" |
| ); |
| #endif /* CFG_JFFS_SINGLE_PART */ |
| |
| /***************************************************/ |
| |
| U_BOOT_CMD( |
| fsload, 3, 0, do_jffs2_fsload, |
| "fsload\t- load binary file from a filesystem image\n", |
| "[ off ] [ filename ]\n" |
| " - load binary file from flash bank\n" |
| " with offset 'off'\n" |
| ); |
| |
| U_BOOT_CMD( |
| fsinfo, 1, 1, do_jffs2_fsinfo, |
| "fsinfo\t- print information about filesystems\n", |
| " - print information about filesystems\n" |
| ); |
| |
| U_BOOT_CMD( |
| ls, 2, 1, do_jffs2_ls, |
| "ls\t- list files in a directory (default /)\n", |
| "[ directory ]\n" |
| " - list files in a directory.\n" |
| ); |
| |
| #endif /* CFG_CMD_JFFS2 */ |