| /* |
| * Freescale ls1021a SOC common device tree source |
| * |
| * Copyright 2013-2015 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| compatible = "fsl,ls1021a"; |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| serial0 = &lpuart0; |
| serial1 = &lpuart1; |
| serial2 = &lpuart2; |
| serial3 = &lpuart3; |
| serial4 = &lpuart4; |
| serial5 = &lpuart5; |
| sysclk = &sysclk; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@f00 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0xf00>; |
| clocks = <&cluster1_clk>; |
| }; |
| |
| cpu@f01 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0xf01>; |
| clocks = <&cluster1_clk>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| gic: interrupt-controller@1400000 { |
| compatible = "arm,cortex-a7-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x1401000 0x1000>, |
| <0x1402000 0x1000>, |
| <0x1404000 0x2000>, |
| <0x1406000 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| |
| }; |
| |
| ifc: ifc@1530000 { |
| compatible = "fsl,ifc", "simple-bus"; |
| reg = <0x1530000 0x10000>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| dcfg: dcfg@1ee0000 { |
| compatible = "fsl,ls1021a-dcfg", "syscon"; |
| reg = <0x1ee0000 0x10000>; |
| big-endian; |
| }; |
| |
| esdhc: esdhc@1560000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x1560000 0x10000>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| voltage-ranges = <1800 1800 3300 3300>; |
| sdhci,auto-cmd12; |
| big-endian; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| scfg: scfg@1570000 { |
| compatible = "fsl,ls1021a-scfg", "syscon"; |
| reg = <0x1570000 0x10000>; |
| big-endian; |
| }; |
| |
| clockgen: clocking@1ee1000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1ee1000 0x10000>; |
| |
| sysclk: sysclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-output-names = "sysclk"; |
| }; |
| |
| cga_pll1: pll@800 { |
| compatible = "fsl,qoriq-core-pll-2.0"; |
| #clock-cells = <1>; |
| reg = <0x800 0x10>; |
| clocks = <&sysclk>; |
| clock-output-names = "cga-pll1", "cga-pll1-div2", |
| "cga-pll1-div4"; |
| }; |
| |
| platform_clk: pll@c00 { |
| compatible = "fsl,qoriq-core-pll-2.0"; |
| #clock-cells = <1>; |
| reg = <0xc00 0x10>; |
| clocks = <&sysclk>; |
| clock-output-names = "platform-clk", "platform-clk-div2"; |
| }; |
| |
| cluster1_clk: clk0c0@0 { |
| compatible = "fsl,qoriq-core-mux-2.0"; |
| #clock-cells = <0>; |
| reg = <0x0 0x10>; |
| clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4"; |
| clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>; |
| clock-output-names = "cluster1-clk"; |
| }; |
| }; |
| |
| dspi0: dspi@2100000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2100000 0x10000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "dspi"; |
| clocks = <&platform_clk 1>; |
| num-cs = <6>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| dspi1: dspi@2110000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2110000 0x10000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "dspi"; |
| clocks = <&platform_clk 1>; |
| num-cs = <6>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| qspi: quadspi@1550000 { |
| compatible = "fsl,vf610-qspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x1550000 0x10000>, |
| <0x40000000 0x4000000>; |
| reg-names = "QuadSPI", "QuadSPI-memory"; |
| num-cs = <2>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@2180000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2180000 0x10000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&platform_clk 1>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@2190000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2190000 0x10000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&platform_clk 1>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@21a0000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x21a0000 0x10000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&platform_clk 1>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@21c0500 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x21c0500 0x100>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@21c0600 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x21c0600 0x100>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@21d0500 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x21d0500 0x100>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@21d0600 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x21d0600 0x100>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| lpuart0: serial@2950000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x2950000 0x1000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sysclk>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart1: serial@2960000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x2960000 0x1000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart2: serial@2970000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x2970000 0x1000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart3: serial@2980000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x2980000 0x1000>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart4: serial@2990000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x2990000 0x1000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart5: serial@29a0000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x29a0000 0x1000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| wdog0: watchdog@2ad0000 { |
| compatible = "fsl,imx21-wdt"; |
| reg = <0x2ad0000 0x10000>; |
| interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "wdog-en"; |
| big-endian; |
| }; |
| |
| sai1: sai@2b50000 { |
| compatible = "fsl,vf610-sai"; |
| reg = <0x2b50000 0x10000>; |
| interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "sai"; |
| dma-names = "tx", "rx"; |
| dmas = <&edma0 1 47>, |
| <&edma0 1 46>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| sai2: sai@2b60000 { |
| compatible = "fsl,vf610-sai"; |
| reg = <0x2b60000 0x10000>; |
| interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "sai"; |
| dma-names = "tx", "rx"; |
| dmas = <&edma0 1 45>, |
| <&edma0 1 44>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| edma0: edma@2c00000 { |
| #dma-cells = <2>; |
| compatible = "fsl,vf610-edma"; |
| reg = <0x2c00000 0x10000>, |
| <0x2c10000 0x10000>, |
| <0x2c20000 0x10000>; |
| interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "edma-tx", "edma-err"; |
| dma-channels = <32>; |
| big-endian; |
| clock-names = "dmamux0", "dmamux1"; |
| clocks = <&platform_clk 1>, |
| <&platform_clk 1>; |
| }; |
| |
| mdio0: mdio@2d24000 { |
| compatible = "gianfar"; |
| device_type = "mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2d24000 0x4000>; |
| }; |
| |
| usb@8600000 { |
| compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; |
| reg = <0x8600000 0x1000>; |
| interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| phy_type = "ulpi"; |
| }; |
| |
| usb3@3100000 { |
| compatible = "fsl,layerscape-dwc3"; |
| reg = <0x3100000 0x10000>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| }; |
| }; |
| }; |