| /* |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| |
| #include <common.h> |
| #include <mpc8xx.h> |
| #include "fpga.h" |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| static long int dram_size (long int, long int *, long int); |
| unsigned long flash_init (void); |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| #define _NOT_USED_ 0xFFFFCC25 |
| |
| const uint sdram_table[] = { |
| /* |
| * Single Read. (Offset 00h in UPMA RAM) |
| */ |
| 0x0F03CC04, 0x00ACCC24, 0x1FF74C20, _NOT_USED_, |
| _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, |
| |
| /* |
| * Burst Read. (Offset 08h in UPMA RAM) |
| */ |
| 0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20, |
| 0x01FFCC20, 0x1FF74C20, _NOT_USED_, _NOT_USED_, |
| _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, |
| _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, |
| |
| /* |
| * Single Write. (Offset 18h in UPMA RAM) |
| */ |
| 0x0F03CC02, 0x00AC0C24, 0x1FF74C25, _NOT_USED_, |
| _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, |
| |
| /* |
| * Burst Write. (Offset 20h in UPMA RAM) |
| */ |
| 0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22, |
| 0x01FFFC24, 0x1FF74C25, _NOT_USED_, _NOT_USED_, |
| _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, |
| _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, |
| |
| /* |
| * Refresh. (Offset 30h in UPMA RAM) |
| * (Initialization code at 0x36) |
| */ |
| 0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_, |
| _NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34, |
| 0x0FFACCB4, 0x0FF5CC34, 0x0FFCC34, 0x0FFFCCB4, |
| |
| /* |
| * Exception. (Offset 3Ch in UPMA RAM) |
| */ |
| 0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_ |
| }; |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| |
| /* |
| * Check Board Identity: |
| */ |
| |
| int checkboard (void) |
| { |
| unsigned char *s = getenv ("serial#"); |
| |
| puts ("Board QUANTUM, Serial No: "); |
| |
| for (; s && *s; ++s) { |
| if (*s == ' ') |
| break; |
| putc (*s); |
| } |
| putc ('\n'); |
| return (0); /* success */ |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| long int initdram (int board_type) |
| { |
| volatile immap_t *immap = (immap_t *) CFG_IMMR; |
| volatile memctl8xx_t *memctl = &immap->im_memctl; |
| long int size9; |
| |
| upmconfig (UPMA, (uint *) sdram_table, |
| sizeof (sdram_table) / sizeof (uint)); |
| |
| /* Refresh clock prescalar */ |
| memctl->memc_mptpr = CFG_MPTPR; |
| |
| memctl->memc_mar = 0x00000088; |
| |
| /* Map controller banks 1 to the SDRAM bank */ |
| memctl->memc_or1 = CFG_OR1_PRELIM; |
| memctl->memc_br1 = CFG_BR1_PRELIM; |
| |
| memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */ |
| |
| udelay (200); |
| |
| /* perform SDRAM initializsation sequence */ |
| |
| memctl->memc_mcr = 0x80002136; /* SDRAM bank 0 */ |
| udelay (1); |
| |
| memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ |
| |
| udelay (1000); |
| |
| /* Check Bank 0 Memory Size, |
| * 9 column mode |
| */ |
| size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE_PRELIM, |
| SDRAM_MAX_SIZE); |
| /* |
| * Final mapping: |
| */ |
| memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; |
| udelay (1000); |
| |
| return (size9); |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* |
| * Check memory range for valid RAM. A simple memory test determines |
| * the actually available RAM size between addresses `base' and |
| * `base + maxsize'. Some (not all) hardware errors are detected: |
| * - short between address lines |
| * - short between data lines |
| */ |
| |
| static long int dram_size (long int mamr_value, long int *base, |
| long int maxsize) |
| { |
| volatile immap_t *immap = (immap_t *) CFG_IMMR; |
| volatile memctl8xx_t *memctl = &immap->im_memctl; |
| volatile long int *addr; |
| ulong cnt, val, size; |
| ulong save[32]; /* to make test non-destructive */ |
| unsigned char i = 0; |
| |
| memctl->memc_mamr = mamr_value; |
| |
| for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { |
| addr = base + cnt; /* pointer arith! */ |
| |
| save[i++] = *addr; |
| *addr = ~cnt; |
| } |
| |
| /* write 0 to base address */ |
| addr = base; |
| save[i] = *addr; |
| *addr = 0; |
| |
| /* check at base address */ |
| if ((val = *addr) != 0) { |
| /* Restore the original data before leaving the function. |
| */ |
| *addr = save[i]; |
| for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { |
| addr = (volatile ulong *) base + cnt; |
| *addr = save[--i]; |
| } |
| return (0); |
| } |
| |
| for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { |
| addr = base + cnt; /* pointer arith! */ |
| |
| val = *addr; |
| *addr = save[--i]; |
| |
| if (val != (~cnt)) { |
| size = cnt * sizeof (long); |
| /* Restore the original data before returning |
| */ |
| for (cnt <<= 1; cnt <= maxsize / sizeof (long); |
| cnt <<= 1) { |
| addr = (volatile ulong *) base + cnt; |
| *addr = save[--i]; |
| } |
| return (size); |
| } |
| } |
| return (maxsize); |
| } |
| |
| /* |
| * Miscellaneous intialization |
| */ |
| int misc_init_r (void) |
| { |
| char *fpga_data_str = getenv ("fpgadata"); |
| char *fpga_size_str = getenv ("fpgasize"); |
| void *fpga_data; |
| int fpga_size; |
| int status; |
| volatile immap_t *immap = (immap_t *) CFG_IMMR; |
| volatile memctl8xx_t *memctl = &immap->im_memctl; |
| int flash_size; |
| |
| /* Remap FLASH according to real size */ |
| flash_size = flash_init (); |
| memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-flash_size & 0xFFFF8000); |
| memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; |
| |
| if (fpga_data_str && fpga_size_str) { |
| fpga_data = (void *) simple_strtoul (fpga_data_str, NULL, 16); |
| fpga_size = simple_strtoul (fpga_size_str, NULL, 10); |
| |
| status = fpga_boot (fpga_data, fpga_size); |
| if (status != 0) { |
| printf ("\nFPGA: Booting failed "); |
| switch (status) { |
| case ERROR_FPGA_PRG_INIT_LOW: |
| printf ("(Timeout: INIT not low after asserting PROGRAM*)\n "); |
| break; |
| case ERROR_FPGA_PRG_INIT_HIGH: |
| printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n "); |
| break; |
| case ERROR_FPGA_PRG_DONE: |
| printf ("(Timeout: DONE not high after programming FPGA)\n "); |
| break; |
| } |
| } |
| } |
| return 0; |
| } |