include/configs/qong.h - platform/external/u-boot - Gitiles

 /*
  * Copyright (C) 2009, Ilya Yanok, Emcraft Systems, <yanok@emcraft.com>
  *
  * Configuration settings for the Dave/DENX QongEVB-LITE board.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include <asm/arch/mx31-regs.h>

  /* High Level Configuration Options */
 #define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
 #define CONFIG_MX31		1	/* in a mx31 */
 #define CONFIG_QONG		1
 #define CONFIG_MX31_HCLK_FREQ	26000000	/* 26MHz */
 #define CONFIG_MX31_CLK32	32768

 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1

 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
 /* size in bytes reserved for initial data */
 #define CONFIG_SYS_GBL_DATA_SIZE	128

 /*
  * Hardware drivers
  */

 #define CONFIG_MX31_UART	1
 #define CONFIG_SYS_MX31_UART1	1

 /* FPGA */
 #define CONFIG_QONG_FPGA	1
 #define CONFIG_FPGA_BASE	(CS1_BASE)

 #ifdef CONFIG_QONG_FPGA
 /* Ethernet */
 #define CONFIG_DNET		1
 #define CONFIG_DNET_BASE	(CS1_BASE + QONG_FPGA_PERIPH_SIZE)
 #define CONFIG_NET_MULTI	1

 /*
  * Reducing the ARP timeout from default 5 seconds to 200ms we speed up the
  * initial TFTP transfer, should the user wish one, significantly.
  */
 #define CONFIG_ARP_TIMEOUT	200UL

 #endif /* CONFIG_QONG_FPGA */

 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}

 /***********************************************************
  * Command definition
  ***********************************************************/

 #include <config_cmd_default.h>

 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_JFFS2

 /*
  * You can compile in a MAC address and your custom net settings by using
  * the following syntax.
  *
  * #define CONFIG_ETHADDR		xx:xx:xx:xx:xx:xx
  * #define CONFIG_SERVERIP		<server ip>
  * #define CONFIG_IPADDR		<board ip>
  * #define CONFIG_GATEWAYIP		<gateway ip>
  * #define CONFIG_NETMASK		<your netmask>
  */

 #define CONFIG_BOOTDELAY	5

 #define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */

 #define xstr(s)	str(s)
 #define str(s)	#s

 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addtty=setenv bootargs ${bootargs}"				\
 		" console=ttymxc0,${baudrate}\0"			\
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"addmisc=setenv bootargs ${bootargs}\0"				\
 	"uboot_addr=a0000000\0"						\
 	"kernel_addr=a0080000\0"					\
 	"ramdisk_addr=a0300000\0"					\
 	"u-boot=qong/u-boot.bin\0"					\
 	"kernel_addr_r=80800000\0"					\
 	"hostname=qong\0"						\
 	"bootfile=qong/uImage\0"					\
 	"rootpath=/opt/eldk-4.2-arm/armVFP\0"				\
 	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
 		"bootm ${kernel_addr}\0"				\
 	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
 		"run nfsargs addip addtty addmtd addmisc;"		\
 		"bootm\0"						\
 	"bootcmd=run flash_self\0"					\
 	"load=tftp ${loadaddr} ${u-boot}\0"				\
 	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)		\
 		" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)	\
 		" +${filesize};cp.b ${fileaddr} "			\
 		xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"		\
 	"upd=run load update\0"						\

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 		sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS		32	/* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

 /* memtest works on first 255MB of RAM */
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1 + 0xff000000)

 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

 #define CONFIG_SYS_HZ			1000

 #define CONFIG_CMDLINE_EDITING	1

 #define CONFIG_MISC_INIT_R	1
 /*-----------------------------------------------------------------------
  * Stack sizes
  *
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */

 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		CSD0_BASE
 #define PHYS_SDRAM_1_SIZE	0x10000000	/* 256 MB */

 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 #define CONFIG_SYS_FLASH_BASE		CS0_BASE
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 /* max number of sectors on one chip */
 #define CONFIG_SYS_MAX_FLASH_SECT	1024
 /* Monitor at beginning of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256KiB */

 #define	CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_SECT_SIZE	0x20000
 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)

 /* Address and size of Redundant Environment Sector	*/
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE

 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
  */
 /* Flash memory is CFI compliant */
 #define CONFIG_SYS_FLASH_CFI			1
 /* Use drivers/cfi_flash.c */
 #define CONFIG_FLASH_CFI_DRIVER			1
 /* Use buffered writes (~10x faster) */
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 /* Use hardware sector protection */
 #define CONFIG_SYS_FLASH_PROTECTION		1

 /*
  * JFFS2 partitions
  */
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=physmap-flash.0"
 #define MTDPARTS_DEFAULT	\
 	"mtdparts=physmap-flash.0:256k(U-Boot),128k(env1),"	\
 	"128k(env2),2560k(kernel),13m(ramdisk),-(user)"

 #endif /* __CONFIG_H */
	/*
	* Copyright (C) 2009, Ilya Yanok, Emcraft Systems, <yanok@emcraft.com>
	*
	* Configuration settings for the Dave/DENX QongEVB-LITE board.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <asm/arch/mx31-regs.h>

	/* High Level Configuration Options */
	#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
	#define CONFIG_MX31 1 /* in a mx31 */
	#define CONFIG_QONG 1
	#define CONFIG_MX31_HCLK_FREQ 26000000 /* 26MHz */
	#define CONFIG_MX31_CLK32 32768

	#define CONFIG_DISPLAY_CPUINFO
	#define CONFIG_DISPLAY_BOARDINFO

	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1

	/*
	* Size of malloc() pool
	*/
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
	/* size in bytes reserved for initial data */
	#define CONFIG_SYS_GBL_DATA_SIZE 128

	/*
	* Hardware drivers
	*/

	#define CONFIG_MX31_UART 1
	#define CONFIG_SYS_MX31_UART1 1

	/* FPGA */
	#define CONFIG_QONG_FPGA 1
	#define CONFIG_FPGA_BASE (CS1_BASE)

	#ifdef CONFIG_QONG_FPGA
	/* Ethernet */
	#define CONFIG_DNET 1
	#define CONFIG_DNET_BASE (CS1_BASE + QONG_FPGA_PERIPH_SIZE)
	#define CONFIG_NET_MULTI 1

	/*
	* Reducing the ARP timeout from default 5 seconds to 200ms we speed up the
	* initial TFTP transfer, should the user wish one, significantly.
	*/
	#define CONFIG_ARP_TIMEOUT 200UL

	#endif /* CONFIG_QONG_FPGA */

	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200
	#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}

	/***********************************************************
	* Command definition
	***********************************************************/

	#include <config_cmd_default.h>

	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_NET
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_JFFS2

	/*
	* You can compile in a MAC address and your custom net settings by using
	* the following syntax.
	*
	* #define CONFIG_ETHADDR xx:xx:xx:xx:xx:xx
	* #define CONFIG_SERVERIP <server ip>
	* #define CONFIG_IPADDR <board ip>
	* #define CONFIG_GATEWAYIP <gateway ip>
	* #define CONFIG_NETMASK <your netmask>
	*/

	#define CONFIG_BOOTDELAY 5

	#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */

	#define xstr(s) str(s)
	#define str(s) #s

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=eth0\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath}\0" \
	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	"addip=setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	":${hostname}:${netdev}:off panic=1\0" \
	"addtty=setenv bootargs ${bootargs}" \
	" console=ttymxc0,${baudrate}\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"addmisc=setenv bootargs ${bootargs}\0" \
	"uboot_addr=a0000000\0" \
	"kernel_addr=a0080000\0" \
	"ramdisk_addr=a0300000\0" \
	"u-boot=qong/u-boot.bin\0" \
	"kernel_addr_r=80800000\0" \
	"hostname=qong\0" \
	"bootfile=qong/uImage\0" \
	"rootpath=/opt/eldk-4.2-arm/armVFP\0" \
	"flash_self=run ramargs addip addtty addmtd addmisc;" \
	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
	"bootm ${kernel_addr}\0" \
	"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
	"run nfsargs addip addtty addmtd addmisc;" \
	"bootm\0" \
	"bootcmd=run flash_self\0" \
	"load=tftp ${loadaddr} ${u-boot}\0" \
	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
	" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
	" +${filesize};cp.b ${fileaddr} " \
	xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
	"upd=run load update\0" \

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT "=> "
	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	/* Print Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
	/* Boot Argument Buffer Size */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

	/* memtest works on first 255MB of RAM */
	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
	#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0xff000000)

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	#define CONFIG_SYS_HZ 1000

	#define CONFIG_CMDLINE_EDITING 1

	#define CONFIG_MISC_INIT_R 1
	/*-----------------------------------------------------------------------
	* Stack sizes
	*
	* The stack sizes are set up in start.S using the settings below
	*/
	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */

	/*-----------------------------------------------------------------------
	* Physical Memory Map
	*/
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM_1 CSD0_BASE
	#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */

	/*-----------------------------------------------------------------------
	* FLASH and environment organization
	*/
	#define CONFIG_SYS_FLASH_BASE CS0_BASE
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	/* max number of sectors on one chip */
	#define CONFIG_SYS_MAX_FLASH_SECT 1024
	/* Monitor at beginning of flash */
	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */

	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_SECT_SIZE 0x20000
	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)

	/* Address and size of Redundant Environment Sector */
	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE

	/*-----------------------------------------------------------------------
	* CFI FLASH driver setup
	*/
	/* Flash memory is CFI compliant */
	#define CONFIG_SYS_FLASH_CFI 1
	/* Use drivers/cfi_flash.c */
	#define CONFIG_FLASH_CFI_DRIVER 1
	/* Use buffered writes (~10x faster) */
	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
	/* Use hardware sector protection */
	#define CONFIG_SYS_FLASH_PROTECTION 1

	/*
	* JFFS2 partitions
	*/
	#define CONFIG_CMD_MTDPARTS
	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	#define CONFIG_FLASH_CFI_MTD
	#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
	#define MTDPARTS_DEFAULT \
	"mtdparts=physmap-flash.0:256k(U-Boot),128k(env1)," \
	"128k(env2),2560k(kernel),13m(ramdisk),-(user)"

	#endif /* __CONFIG_H */