| CONFIG_ARM=y |
| CONFIG_ARCH_MX6=y |
| CONFIG_SYS_TEXT_BASE=0x17800000 |
| CONFIG_SPL_GPIO_SUPPORT=y |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_TARGET_PFLA02=y |
| CONFIG_SPL_MMC_SUPPORT=y |
| CONFIG_SPL_SERIAL_SUPPORT=y |
| CONFIG_ENV_SIZE=0x4000 |
| CONFIG_ENV_OFFSET=0x100000 |
| CONFIG_NR_DRAM_BANKS=1 |
| CONFIG_SPL=y |
| CONFIG_ENV_SECT_SIZE=0x10000 |
| CONFIG_SPL_LIBDISK_SUPPORT=y |
| CONFIG_SPL_SPI_FLASH_SUPPORT=y |
| CONFIG_SPL_SPI_SUPPORT=y |
| CONFIG_CMD_HDMIDETECT=y |
| CONFIG_SPL_TEXT_BASE=0x00908000 |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_FIT=y |
| CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" |
| CONFIG_BOOTDELAY=3 |
| # CONFIG_USE_BOOTCOMMAND is not set |
| CONFIG_DISPLAY_BOARDINFO_LATE=y |
| CONFIG_BOUNCE_BUFFER=y |
| CONFIG_BOARD_EARLY_INIT_F=y |
| CONFIG_SPL_DMA_SUPPORT=y |
| CONFIG_SPL_FS_EXT4=y |
| CONFIG_SPL_I2C_SUPPORT=y |
| CONFIG_SPL_SPI_LOAD=y |
| CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 |
| CONFIG_SPL_WATCHDOG_SUPPORT=y |
| CONFIG_SPL_YMODEM_SUPPORT=y |
| # CONFIG_CMD_FLASH is not set |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| # CONFIG_CMD_NAND is not set |
| CONFIG_CMD_SF=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_EXT4_WRITE=y |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:-(nand);spi2.0:1024k(bootloader),64k(env1),64k(env2),-(rescue)" |
| CONFIG_CMD_UBI=y |
| # CONFIG_SPL_PARTITION_UUIDS is not set |
| CONFIG_ENV_IS_IN_SPI_FLASH=y |
| CONFIG_SYS_REDUNDAND_ENVIRONMENT=y |
| CONFIG_ENV_OFFSET_REDUND=0x110000 |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_DM=y |
| CONFIG_FSL_USDHC=y |
| CONFIG_MTD=y |
| CONFIG_NAND=y |
| CONFIG_NAND_MXS=y |
| CONFIG_SPI_FLASH=y |
| CONFIG_SF_DEFAULT_BUS=2 |
| CONFIG_SF_DEFAULT_MODE=0 |
| CONFIG_SF_DEFAULT_SPEED=20000000 |
| CONFIG_SPI_FLASH_STMICRO=y |
| CONFIG_PHYLIB=y |
| CONFIG_PHY_MICREL=y |
| CONFIG_PHY_MICREL_KSZ90X1=y |
| CONFIG_FEC_MXC=y |
| CONFIG_MII=y |
| CONFIG_SPI=y |
| CONFIG_MXC_SPI=y |
| CONFIG_DM_THERMAL=y |
| CONFIG_OF_LIBFDT=y |