| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2012-2014 Panasonic Corporation |
| * Copyright (C) 2015-2016 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <asm/armv7.h> |
| #include <asm/processor.h> |
| |
| #include "cache-uniphier.h" |
| |
| /* control registers */ |
| #define UNIPHIER_SSCC 0x500c0000 /* Control Register */ |
| #define UNIPHIER_SSCC_BST (0x1 << 20) /* UCWG burst read */ |
| #define UNIPHIER_SSCC_ACT (0x1 << 19) /* Inst-Data separate */ |
| #define UNIPHIER_SSCC_WTG (0x1 << 18) /* WT gathering on */ |
| #define UNIPHIER_SSCC_PRD (0x1 << 17) /* enable pre-fetch */ |
| #define UNIPHIER_SSCC_ON (0x1 << 0) /* enable cache */ |
| #define UNIPHIER_SSCLPDAWCR 0x500c0030 /* Unified/Data Active Way Control */ |
| #define UNIPHIER_SSCLPIAWCR 0x500c0034 /* Instruction Active Way Control */ |
| |
| /* revision registers */ |
| #define UNIPHIER_SSCID 0x503c0100 /* ID Register */ |
| |
| /* operation registers */ |
| #define UNIPHIER_SSCOPE 0x506c0244 /* Cache Operation Primitive Entry */ |
| #define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */ |
| #define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */ |
| #define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */ |
| #define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */ |
| #define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */ |
| #define UNIPHIER_SSCOQM 0x506c0248 |
| #define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21) |
| #define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21) |
| #define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21) |
| #define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21) |
| #define UNIPHIER_SSCOQM_S_MASK (0x3 << 17) |
| #define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17) |
| #define UNIPHIER_SSCOQM_S_ALL (0x1 << 17) |
| #define UNIPHIER_SSCOQM_S_WAY (0x2 << 17) |
| #define UNIPHIER_SSCOQM_CE (0x1 << 15) /* notify completion */ |
| #define UNIPHIER_SSCOQM_CW (0x1 << 14) |
| #define UNIPHIER_SSCOQM_CM_MASK (0x7) |
| #define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */ |
| #define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */ |
| #define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */ |
| #define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */ |
| #define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */ |
| #define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */ |
| #define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */ |
| #define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */ |
| #define UNIPHIER_SSCOQAD 0x506c024c /* Cache Operation Queue Address */ |
| #define UNIPHIER_SSCOQSZ 0x506c0250 /* Cache Operation Queue Size */ |
| #define UNIPHIER_SSCOQMASK 0x506c0254 /* Cache Operation Queue Address Mask */ |
| #define UNIPHIER_SSCOQWN 0x506c0258 /* Cache Operation Queue Way Number */ |
| #define UNIPHIER_SSCOPPQSEF 0x506c025c /* Cache Operation Queue Set Complete */ |
| #define UNIPHIER_SSCOPPQSEF_FE (0x1 << 1) |
| #define UNIPHIER_SSCOPPQSEF_OE (0x1 << 0) |
| #define UNIPHIER_SSCOLPQS 0x506c0260 /* Cache Operation Queue Status */ |
| #define UNIPHIER_SSCOLPQS_EF (0x1 << 2) |
| #define UNIPHIER_SSCOLPQS_EST (0x1 << 1) |
| #define UNIPHIER_SSCOLPQS_QST (0x1 << 0) |
| |
| #define UNIPHIER_SSC_LINE_SIZE 128 |
| #define UNIPHIER_SSC_RANGE_OP_MAX_SIZE (0x00400000 - (UNIPHIER_SSC_LINE_SIZE)) |
| |
| #define UNIPHIER_SSCOQAD_IS_NEEDED(op) \ |
| ((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE) |
| #define UNIPHIER_SSCOQWM_IS_NEEDED(op) \ |
| (((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_WAY) || \ |
| ((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY)) |
| |
| /* uniphier_cache_sync - perform a sync point for a particular cache level */ |
| static void uniphier_cache_sync(void) |
| { |
| /* drain internal buffers */ |
| writel(UNIPHIER_SSCOPE_CM_SYNC, UNIPHIER_SSCOPE); |
| /* need a read back to confirm */ |
| readl(UNIPHIER_SSCOPE); |
| } |
| |
| /** |
| * uniphier_cache_maint_common - run a queue operation |
| * |
| * @start: start address of range operation (don't care for "all" operation) |
| * @size: data size of range operation (don't care for "all" operation) |
| * @ways: target ways (don't care for operations other than pre-fetch, touch |
| * @operation: flags to specify the desired cache operation |
| */ |
| static void uniphier_cache_maint_common(u32 start, u32 size, u32 ways, |
| u32 operation) |
| { |
| /* clear the complete notification flag */ |
| writel(UNIPHIER_SSCOLPQS_EF, UNIPHIER_SSCOLPQS); |
| |
| do { |
| /* set cache operation */ |
| writel(UNIPHIER_SSCOQM_CE | operation, UNIPHIER_SSCOQM); |
| |
| /* set address range if needed */ |
| if (likely(UNIPHIER_SSCOQAD_IS_NEEDED(operation))) { |
| writel(start, UNIPHIER_SSCOQAD); |
| writel(size, UNIPHIER_SSCOQSZ); |
| } |
| |
| /* set target ways if needed */ |
| if (unlikely(UNIPHIER_SSCOQWM_IS_NEEDED(operation))) |
| writel(ways, UNIPHIER_SSCOQWN); |
| } while (unlikely(readl(UNIPHIER_SSCOPPQSEF) & |
| (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE))); |
| |
| /* wait until the operation is completed */ |
| while (likely(readl(UNIPHIER_SSCOLPQS) != UNIPHIER_SSCOLPQS_EF)) |
| cpu_relax(); |
| } |
| |
| static void uniphier_cache_maint_all(u32 operation) |
| { |
| uniphier_cache_maint_common(0, 0, 0, UNIPHIER_SSCOQM_S_ALL | operation); |
| |
| uniphier_cache_sync(); |
| } |
| |
| static void uniphier_cache_maint_range(u32 start, u32 end, u32 ways, |
| u32 operation) |
| { |
| u32 size; |
| |
| /* |
| * If the start address is not aligned, |
| * perform a cache operation for the first cache-line |
| */ |
| start = start & ~(UNIPHIER_SSC_LINE_SIZE - 1); |
| |
| size = end - start; |
| |
| if (unlikely(size >= (u32)(-UNIPHIER_SSC_LINE_SIZE))) { |
| /* this means cache operation for all range */ |
| uniphier_cache_maint_all(operation); |
| return; |
| } |
| |
| /* |
| * If the end address is not aligned, |
| * perform a cache operation for the last cache-line |
| */ |
| size = ALIGN(size, UNIPHIER_SSC_LINE_SIZE); |
| |
| while (size) { |
| u32 chunk_size = min_t(u32, size, UNIPHIER_SSC_RANGE_OP_MAX_SIZE); |
| |
| uniphier_cache_maint_common(start, chunk_size, ways, |
| UNIPHIER_SSCOQM_S_RANGE | operation); |
| |
| start += chunk_size; |
| size -= chunk_size; |
| } |
| |
| uniphier_cache_sync(); |
| } |
| |
| void uniphier_cache_prefetch_range(u32 start, u32 end, u32 ways) |
| { |
| uniphier_cache_maint_range(start, end, ways, |
| UNIPHIER_SSCOQM_TID_WAY | |
| UNIPHIER_SSCOQM_CM_PREFETCH); |
| } |
| |
| void uniphier_cache_touch_range(u32 start, u32 end, u32 ways) |
| { |
| uniphier_cache_maint_range(start, end, ways, |
| UNIPHIER_SSCOQM_TID_WAY | |
| UNIPHIER_SSCOQM_CM_TOUCH); |
| } |
| |
| void uniphier_cache_touch_zero_range(u32 start, u32 end, u32 ways) |
| { |
| uniphier_cache_maint_range(start, end, ways, |
| UNIPHIER_SSCOQM_TID_WAY | |
| UNIPHIER_SSCOQM_CM_TOUCH_ZERO); |
| } |
| |
| void uniphier_cache_inv_way(u32 ways) |
| { |
| uniphier_cache_maint_common(0, 0, ways, |
| UNIPHIER_SSCOQM_S_WAY | |
| UNIPHIER_SSCOQM_CM_INV); |
| } |
| |
| void uniphier_cache_set_active_ways(int cpu, u32 active_ways) |
| { |
| void __iomem *base = (void __iomem *)UNIPHIER_SSCC + 0xc00; |
| |
| switch (readl(UNIPHIER_SSCID)) { /* revision */ |
| case 0x12: /* LD4 */ |
| case 0x16: /* sld8 */ |
| base = (void __iomem *)UNIPHIER_SSCC + 0x840; |
| break; |
| default: |
| base = (void __iomem *)UNIPHIER_SSCC + 0xc00; |
| break; |
| } |
| |
| writel(active_ways, base + 4 * cpu); |
| } |
| |
| static void uniphier_cache_endisable(int enable) |
| { |
| u32 tmp; |
| |
| tmp = readl(UNIPHIER_SSCC); |
| if (enable) |
| tmp |= UNIPHIER_SSCC_ON; |
| else |
| tmp &= ~UNIPHIER_SSCC_ON; |
| writel(tmp, UNIPHIER_SSCC); |
| } |
| |
| void uniphier_cache_enable(void) |
| { |
| uniphier_cache_endisable(1); |
| } |
| |
| void uniphier_cache_disable(void) |
| { |
| uniphier_cache_endisable(0); |
| } |
| |
| #ifdef CONFIG_CACHE_UNIPHIER |
| void v7_outer_cache_flush_all(void) |
| { |
| uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH); |
| } |
| |
| void v7_outer_cache_inval_all(void) |
| { |
| uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV); |
| } |
| |
| void v7_outer_cache_flush_range(u32 start, u32 end) |
| { |
| uniphier_cache_maint_range(start, end, 0, UNIPHIER_SSCOQM_CM_FLUSH); |
| } |
| |
| void v7_outer_cache_inval_range(u32 start, u32 end) |
| { |
| if (start & (UNIPHIER_SSC_LINE_SIZE - 1)) { |
| start &= ~(UNIPHIER_SSC_LINE_SIZE - 1); |
| uniphier_cache_maint_range(start, UNIPHIER_SSC_LINE_SIZE, 0, |
| UNIPHIER_SSCOQM_CM_FLUSH); |
| start += UNIPHIER_SSC_LINE_SIZE; |
| } |
| |
| if (start >= end) { |
| uniphier_cache_sync(); |
| return; |
| } |
| |
| if (end & (UNIPHIER_SSC_LINE_SIZE - 1)) { |
| end &= ~(UNIPHIER_SSC_LINE_SIZE - 1); |
| uniphier_cache_maint_range(end, UNIPHIER_SSC_LINE_SIZE, 0, |
| UNIPHIER_SSCOQM_CM_FLUSH); |
| } |
| |
| if (start >= end) { |
| uniphier_cache_sync(); |
| return; |
| } |
| |
| uniphier_cache_maint_range(start, end, 0, UNIPHIER_SSCOQM_CM_INV); |
| } |
| |
| void v7_outer_cache_enable(void) |
| { |
| uniphier_cache_set_active_ways(0, U32_MAX); /* activate all ways */ |
| uniphier_cache_enable(); |
| } |
| |
| void v7_outer_cache_disable(void) |
| { |
| uniphier_cache_disable(); |
| } |
| #endif |
| |
| void enable_caches(void) |
| { |
| dcache_enable(); |
| } |