| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Texas Instruments System Control Interface Protocol Driver |
| * Based on drivers/firmware/ti_sci.c from Linux. |
| * |
| * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ |
| * Lokesh Vutla <lokeshvutla@ti.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <mailbox.h> |
| #include <malloc.h> |
| #include <dm/device.h> |
| #include <dm/device_compat.h> |
| #include <dm/devres.h> |
| #include <linux/bitops.h> |
| #include <linux/compat.h> |
| #include <linux/err.h> |
| #include <linux/soc/ti/k3-sec-proxy.h> |
| #include <linux/soc/ti/ti_sci_protocol.h> |
| |
| #include "ti_sci.h" |
| #include "ti_sci_static_data.h" |
| |
| /* List of all TI SCI devices active in system */ |
| static LIST_HEAD(ti_sci_list); |
| |
| /** |
| * struct ti_sci_xfer - Structure representing a message flow |
| * @tx_message: Transmit message |
| * @rx_len: Receive message length |
| */ |
| struct ti_sci_xfer { |
| struct k3_sec_proxy_msg tx_message; |
| u8 rx_len; |
| }; |
| |
| /** |
| * struct ti_sci_rm_type_map - Structure representing TISCI Resource |
| * management representation of dev_ids. |
| * @dev_id: TISCI device ID |
| * @type: Corresponding id as identified by TISCI RM. |
| * |
| * Note: This is used only as a work around for using RM range apis |
| * for AM654 SoC. For future SoCs dev_id will be used as type |
| * for RM range APIs. In order to maintain ABI backward compatibility |
| * type is not being changed for AM654 SoC. |
| */ |
| struct ti_sci_rm_type_map { |
| u32 dev_id; |
| u16 type; |
| }; |
| |
| /** |
| * struct ti_sci_desc - Description of SoC integration |
| * @default_host_id: Host identifier representing the compute entity |
| * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds) |
| * @max_msgs: Maximum number of messages that can be pending |
| * simultaneously in the system |
| * @max_msg_size: Maximum size of data per message that can be handled. |
| */ |
| struct ti_sci_desc { |
| u8 default_host_id; |
| int max_rx_timeout_ms; |
| int max_msgs; |
| int max_msg_size; |
| }; |
| |
| /** |
| * struct ti_sci_info - Structure representing a TI SCI instance |
| * @dev: Device pointer |
| * @desc: SoC description for this instance |
| * @handle: Instance of TI SCI handle to send to clients. |
| * @chan_tx: Transmit mailbox channel |
| * @chan_rx: Receive mailbox channel |
| * @xfer: xfer info |
| * @list: list head |
| * @is_secure: Determines if the communication is through secure threads. |
| * @host_id: Host identifier representing the compute entity |
| * @seq: Seq id used for verification for tx and rx message. |
| */ |
| struct ti_sci_info { |
| struct udevice *dev; |
| const struct ti_sci_desc *desc; |
| struct ti_sci_handle handle; |
| struct mbox_chan chan_tx; |
| struct mbox_chan chan_rx; |
| struct mbox_chan chan_notify; |
| struct ti_sci_xfer xfer; |
| struct list_head list; |
| struct list_head dev_list; |
| bool is_secure; |
| u8 host_id; |
| u8 seq; |
| }; |
| |
| struct ti_sci_exclusive_dev { |
| u32 id; |
| u32 count; |
| struct list_head list; |
| }; |
| |
| #define handle_to_ti_sci_info(h) container_of(h, struct ti_sci_info, handle) |
| |
| /** |
| * ti_sci_setup_one_xfer() - Setup one message type |
| * @info: Pointer to SCI entity information |
| * @msg_type: Message type |
| * @msg_flags: Flag to set for the message |
| * @buf: Buffer to be send to mailbox channel |
| * @tx_message_size: transmit message size |
| * @rx_message_size: receive message size. may be set to zero for send-only |
| * transactions. |
| * |
| * Helper function which is used by various command functions that are |
| * exposed to clients of this driver for allocating a message traffic event. |
| * |
| * Return: Corresponding ti_sci_xfer pointer if all went fine, |
| * else appropriate error pointer. |
| */ |
| static struct ti_sci_xfer *ti_sci_setup_one_xfer(struct ti_sci_info *info, |
| u16 msg_type, u32 msg_flags, |
| u32 *buf, |
| size_t tx_message_size, |
| size_t rx_message_size) |
| { |
| struct ti_sci_xfer *xfer = &info->xfer; |
| struct ti_sci_msg_hdr *hdr; |
| |
| /* Ensure we have sane transfer sizes */ |
| if (rx_message_size > info->desc->max_msg_size || |
| tx_message_size > info->desc->max_msg_size || |
| (rx_message_size > 0 && rx_message_size < sizeof(*hdr)) || |
| tx_message_size < sizeof(*hdr)) { |
| dev_err(info->dev, "TI-SCI message transfer size not sane\n"); |
| return ERR_PTR(-ERANGE); |
| } |
| |
| |
| info->seq = ~info->seq; |
| xfer->tx_message.buf = buf; |
| xfer->tx_message.len = tx_message_size; |
| xfer->rx_len = (u8)rx_message_size; |
| |
| hdr = (struct ti_sci_msg_hdr *)buf; |
| hdr->seq = info->seq; |
| hdr->type = msg_type; |
| hdr->host = info->host_id; |
| hdr->flags = msg_flags; |
| |
| return xfer; |
| } |
| |
| /** |
| * ti_sci_get_response() - Receive response from mailbox channel |
| * @info: Pointer to SCI entity information |
| * @xfer: Transfer to initiate and wait for response |
| * @chan: Channel to receive the response |
| * |
| * Return: -ETIMEDOUT in case of no response, if transmit error, |
| * return corresponding error, else if all goes well, |
| * return 0. |
| */ |
| static int ti_sci_get_response(struct ti_sci_info *info, |
| struct ti_sci_xfer *xfer, |
| struct mbox_chan *chan) |
| { |
| struct k3_sec_proxy_msg *msg = &xfer->tx_message; |
| struct ti_sci_secure_msg_hdr *secure_hdr; |
| struct ti_sci_msg_hdr *hdr; |
| int ret; |
| |
| /* Receive the response */ |
| ret = mbox_recv(chan, msg, info->desc->max_rx_timeout_ms * 1000); |
| if (ret) { |
| dev_err(info->dev, "%s: Message receive failed. ret = %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| /* ToDo: Verify checksum */ |
| if (info->is_secure) { |
| secure_hdr = (struct ti_sci_secure_msg_hdr *)msg->buf; |
| msg->buf = (u32 *)((void *)msg->buf + sizeof(*secure_hdr)); |
| } |
| |
| /* msg is updated by mailbox driver */ |
| hdr = (struct ti_sci_msg_hdr *)msg->buf; |
| |
| /* Sanity check for message response */ |
| if (hdr->seq != info->seq) { |
| dev_dbg(info->dev, "%s: Message for %d is not expected\n", |
| __func__, hdr->seq); |
| return ret; |
| } |
| |
| if (msg->len > info->desc->max_msg_size) { |
| dev_err(info->dev, "%s: Unable to handle %zu xfer (max %d)\n", |
| __func__, msg->len, info->desc->max_msg_size); |
| return -EINVAL; |
| } |
| |
| if (msg->len < xfer->rx_len) { |
| dev_err(info->dev, "%s: Recv xfer %zu < expected %d length\n", |
| __func__, msg->len, xfer->rx_len); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_is_response_ack() - Generic ACK/NACK message checkup |
| * @r: pointer to response buffer |
| * |
| * Return: true if the response was an ACK, else returns false. |
| */ |
| static bool ti_sci_is_response_ack(void *r) |
| { |
| struct ti_sci_msg_hdr *hdr = r; |
| |
| return hdr->flags & TI_SCI_FLAG_RESP_GENERIC_ACK ? true : false; |
| } |
| |
| /** |
| * ti_sci_do_xfer() - Do one transfer |
| * @info: Pointer to SCI entity information |
| * @xfer: Transfer to initiate and wait for response |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_do_xfer(struct ti_sci_info *info, |
| struct ti_sci_xfer *xfer) |
| { |
| struct k3_sec_proxy_msg *msg = &xfer->tx_message; |
| u8 secure_buf[info->desc->max_msg_size]; |
| struct ti_sci_secure_msg_hdr secure_hdr; |
| int ret; |
| |
| if (info->is_secure) { |
| /* ToDo: get checksum of the entire message */ |
| secure_hdr.checksum = 0; |
| secure_hdr.reserved = 0; |
| memcpy(&secure_buf[sizeof(secure_hdr)], xfer->tx_message.buf, |
| xfer->tx_message.len); |
| |
| xfer->tx_message.buf = (u32 *)secure_buf; |
| xfer->tx_message.len += sizeof(secure_hdr); |
| |
| if (xfer->rx_len) |
| xfer->rx_len += sizeof(secure_hdr); |
| } |
| |
| /* Send the message */ |
| ret = mbox_send(&info->chan_tx, msg); |
| if (ret) { |
| dev_err(info->dev, "%s: Message sending failed. ret = %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| /* Get response if requested */ |
| if (xfer->rx_len) { |
| ret = ti_sci_get_response(info, xfer, &info->chan_rx); |
| if (!ti_sci_is_response_ack(xfer->tx_message.buf)) { |
| dev_err(info->dev, "Message not acknowledged"); |
| ret = -ENODEV; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_get_revision() - command to get the revision of the SCI entity |
| * @handle: pointer to TI SCI handle |
| * |
| * Updates the SCI information in the internal data structure. |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_get_revision(struct ti_sci_handle *handle) |
| { |
| struct ti_sci_msg_resp_version *rev_info; |
| struct ti_sci_version_info *ver; |
| struct ti_sci_msg_hdr hdr; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_VERSION, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&hdr, sizeof(struct ti_sci_msg_hdr), |
| sizeof(*rev_info)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| rev_info = (struct ti_sci_msg_resp_version *)xfer->tx_message.buf; |
| |
| ver = &handle->version; |
| ver->abi_major = rev_info->abi_major; |
| ver->abi_minor = rev_info->abi_minor; |
| ver->firmware_revision = rev_info->firmware_revision; |
| strncpy(ver->firmware_description, rev_info->firmware_description, |
| sizeof(ver->firmware_description)); |
| |
| return 0; |
| } |
| |
| /** |
| * cmd_set_board_config_using_msg() - Common command to send board configuration |
| * message |
| * @handle: pointer to TI SCI handle |
| * @msg_type: One of the TISCI message types to set board configuration |
| * @addr: Address where the board config structure is located |
| * @size: Size of the board config structure |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int cmd_set_board_config_using_msg(const struct ti_sci_handle *handle, |
| u16 msg_type, u64 addr, u32 size) |
| { |
| struct ti_sci_msg_board_config req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, msg_type, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.boardcfgp_high = (addr >> 32) & 0xffffffff; |
| req.boardcfgp_low = addr & 0xffffffff; |
| req.boardcfg_size = size; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_set_board_config() - Command to send board configuration message |
| * @handle: pointer to TI SCI handle |
| * @addr: Address where the board config structure is located |
| * @size: Size of the board config structure |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_set_board_config(const struct ti_sci_handle *handle, |
| u64 addr, u32 size) |
| { |
| return cmd_set_board_config_using_msg(handle, |
| TI_SCI_MSG_BOARD_CONFIG, |
| addr, size); |
| } |
| |
| /** |
| * ti_sci_cmd_set_board_config_rm() - Command to send board resource |
| * management configuration |
| * @handle: pointer to TI SCI handle |
| * @addr: Address where the board RM config structure is located |
| * @size: Size of the RM config structure |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static |
| int ti_sci_cmd_set_board_config_rm(const struct ti_sci_handle *handle, |
| u64 addr, u32 size) |
| { |
| return cmd_set_board_config_using_msg(handle, |
| TI_SCI_MSG_BOARD_CONFIG_RM, |
| addr, size); |
| } |
| |
| /** |
| * ti_sci_cmd_set_board_config_security() - Command to send board security |
| * configuration message |
| * @handle: pointer to TI SCI handle |
| * @addr: Address where the board security config structure is located |
| * @size: Size of the security config structure |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static |
| int ti_sci_cmd_set_board_config_security(const struct ti_sci_handle *handle, |
| u64 addr, u32 size) |
| { |
| return cmd_set_board_config_using_msg(handle, |
| TI_SCI_MSG_BOARD_CONFIG_SECURITY, |
| addr, size); |
| } |
| |
| /** |
| * ti_sci_cmd_set_board_config_pm() - Command to send board power and clock |
| * configuration message |
| * @handle: pointer to TI SCI handle |
| * @addr: Address where the board PM config structure is located |
| * @size: Size of the PM config structure |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_set_board_config_pm(const struct ti_sci_handle *handle, |
| u64 addr, u32 size) |
| { |
| return cmd_set_board_config_using_msg(handle, |
| TI_SCI_MSG_BOARD_CONFIG_PM, |
| addr, size); |
| } |
| |
| static struct ti_sci_exclusive_dev |
| *ti_sci_get_exclusive_dev(struct list_head *dev_list, u32 id) |
| { |
| struct ti_sci_exclusive_dev *dev; |
| |
| list_for_each_entry(dev, dev_list, list) |
| if (dev->id == id) |
| return dev; |
| |
| return NULL; |
| } |
| |
| static void ti_sci_add_exclusive_dev(struct ti_sci_info *info, u32 id) |
| { |
| struct ti_sci_exclusive_dev *dev; |
| |
| dev = ti_sci_get_exclusive_dev(&info->dev_list, id); |
| if (dev) { |
| dev->count++; |
| return; |
| } |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| dev->id = id; |
| dev->count = 1; |
| INIT_LIST_HEAD(&dev->list); |
| list_add_tail(&dev->list, &info->dev_list); |
| } |
| |
| static void ti_sci_delete_exclusive_dev(struct ti_sci_info *info, u32 id) |
| { |
| struct ti_sci_exclusive_dev *dev; |
| |
| dev = ti_sci_get_exclusive_dev(&info->dev_list, id); |
| if (!dev) |
| return; |
| |
| if (dev->count > 0) |
| dev->count--; |
| } |
| |
| /** |
| * ti_sci_set_device_state() - Set device state helper |
| * @handle: pointer to TI SCI handle |
| * @id: Device identifier |
| * @flags: flags to setup for the device |
| * @state: State to move the device to |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_set_device_state(const struct ti_sci_handle *handle, |
| u32 id, u32 flags, u8 state) |
| { |
| struct ti_sci_msg_req_set_device_state req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_DEVICE_STATE, |
| flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.id = id; |
| req.state = state; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| if (state == MSG_DEVICE_SW_STATE_AUTO_OFF) |
| ti_sci_delete_exclusive_dev(info, id); |
| else if (flags & MSG_FLAG_DEVICE_EXCLUSIVE) |
| ti_sci_add_exclusive_dev(info, id); |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_set_device_state_no_wait() - Set device state helper without |
| * requesting or waiting for a response. |
| * @handle: pointer to TI SCI handle |
| * @id: Device identifier |
| * @flags: flags to setup for the device |
| * @state: State to move the device to |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_set_device_state_no_wait(const struct ti_sci_handle *handle, |
| u32 id, u32 flags, u8 state) |
| { |
| struct ti_sci_msg_req_set_device_state req; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_DEVICE_STATE, |
| flags | TI_SCI_FLAG_REQ_GENERIC_NORESPONSE, |
| (u32 *)&req, sizeof(req), 0); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.id = id; |
| req.state = state; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_get_device_state() - Get device state helper |
| * @handle: Handle to the device |
| * @id: Device Identifier |
| * @clcnt: Pointer to Context Loss Count |
| * @resets: pointer to resets |
| * @p_state: pointer to p_state |
| * @c_state: pointer to c_state |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_get_device_state(const struct ti_sci_handle *handle, |
| u32 id, u32 *clcnt, u32 *resets, |
| u8 *p_state, u8 *c_state) |
| { |
| struct ti_sci_msg_resp_get_device_state *resp; |
| struct ti_sci_msg_req_get_device_state req; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| if (!clcnt && !resets && !p_state && !c_state) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_DEVICE_STATE, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.id = id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| resp = (struct ti_sci_msg_resp_get_device_state *)xfer->tx_message.buf; |
| |
| if (clcnt) |
| *clcnt = resp->context_loss_count; |
| if (resets) |
| *resets = resp->resets; |
| if (p_state) |
| *p_state = resp->programmed_state; |
| if (c_state) |
| *c_state = resp->current_state; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_get_device() - command to request for device managed by TISCI |
| * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle |
| * @id: Device Identifier |
| * |
| * Request for the device - NOTE: the client MUST maintain integrity of |
| * usage count by balancing get_device with put_device. No refcounting is |
| * managed by driver for that purpose. |
| * |
| * NOTE: The request is for exclusive access for the processor. |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id) |
| { |
| return ti_sci_set_device_state(handle, id, 0, |
| MSG_DEVICE_SW_STATE_ON); |
| } |
| |
| static int ti_sci_cmd_get_device_exclusive(const struct ti_sci_handle *handle, |
| u32 id) |
| { |
| return ti_sci_set_device_state(handle, id, MSG_FLAG_DEVICE_EXCLUSIVE, |
| MSG_DEVICE_SW_STATE_ON); |
| } |
| |
| /** |
| * ti_sci_cmd_idle_device() - Command to idle a device managed by TISCI |
| * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle |
| * @id: Device Identifier |
| * |
| * Request for the device - NOTE: the client MUST maintain integrity of |
| * usage count by balancing get_device with put_device. No refcounting is |
| * managed by driver for that purpose. |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id) |
| { |
| return ti_sci_set_device_state(handle, id, |
| 0, |
| MSG_DEVICE_SW_STATE_RETENTION); |
| } |
| |
| static int ti_sci_cmd_idle_device_exclusive(const struct ti_sci_handle *handle, |
| u32 id) |
| { |
| return ti_sci_set_device_state(handle, id, MSG_FLAG_DEVICE_EXCLUSIVE, |
| MSG_DEVICE_SW_STATE_RETENTION); |
| } |
| |
| /** |
| * ti_sci_cmd_put_device() - command to release a device managed by TISCI |
| * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle |
| * @id: Device Identifier |
| * |
| * Request for the device - NOTE: the client MUST maintain integrity of |
| * usage count by balancing get_device with put_device. No refcounting is |
| * managed by driver for that purpose. |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_put_device(const struct ti_sci_handle *handle, u32 id) |
| { |
| return ti_sci_set_device_state(handle, id, 0, |
| MSG_DEVICE_SW_STATE_AUTO_OFF); |
| } |
| |
| static |
| int ti_sci_cmd_release_exclusive_devices(const struct ti_sci_handle *handle) |
| { |
| struct ti_sci_exclusive_dev *dev, *tmp; |
| struct ti_sci_info *info; |
| int i, cnt; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| list_for_each_entry_safe(dev, tmp, &info->dev_list, list) { |
| cnt = dev->count; |
| debug("%s: id = %d, cnt = %d\n", __func__, dev->id, cnt); |
| for (i = 0; i < cnt; i++) |
| ti_sci_cmd_put_device(handle, dev->id); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ti_sci_cmd_dev_is_valid() - Is the device valid |
| * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle |
| * @id: Device Identifier |
| * |
| * Return: 0 if all went fine and the device ID is valid, else return |
| * appropriate error. |
| */ |
| static int ti_sci_cmd_dev_is_valid(const struct ti_sci_handle *handle, u32 id) |
| { |
| u8 unused; |
| |
| /* check the device state which will also tell us if the ID is valid */ |
| return ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &unused); |
| } |
| |
| /** |
| * ti_sci_cmd_dev_get_clcnt() - Get context loss counter |
| * @handle: Pointer to TISCI handle |
| * @id: Device Identifier |
| * @count: Pointer to Context Loss counter to populate |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_dev_get_clcnt(const struct ti_sci_handle *handle, u32 id, |
| u32 *count) |
| { |
| return ti_sci_get_device_state(handle, id, count, NULL, NULL, NULL); |
| } |
| |
| /** |
| * ti_sci_cmd_dev_is_idle() - Check if the device is requested to be idle |
| * @handle: Pointer to TISCI handle |
| * @id: Device Identifier |
| * @r_state: true if requested to be idle |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_dev_is_idle(const struct ti_sci_handle *handle, u32 id, |
| bool *r_state) |
| { |
| int ret; |
| u8 state; |
| |
| if (!r_state) |
| return -EINVAL; |
| |
| ret = ti_sci_get_device_state(handle, id, NULL, NULL, &state, NULL); |
| if (ret) |
| return ret; |
| |
| *r_state = (state == MSG_DEVICE_SW_STATE_RETENTION); |
| |
| return 0; |
| } |
| |
| /** |
| * ti_sci_cmd_dev_is_stop() - Check if the device is requested to be stopped |
| * @handle: Pointer to TISCI handle |
| * @id: Device Identifier |
| * @r_state: true if requested to be stopped |
| * @curr_state: true if currently stopped. |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_dev_is_stop(const struct ti_sci_handle *handle, u32 id, |
| bool *r_state, bool *curr_state) |
| { |
| int ret; |
| u8 p_state, c_state; |
| |
| if (!r_state && !curr_state) |
| return -EINVAL; |
| |
| ret = |
| ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state); |
| if (ret) |
| return ret; |
| |
| if (r_state) |
| *r_state = (p_state == MSG_DEVICE_SW_STATE_AUTO_OFF); |
| if (curr_state) |
| *curr_state = (c_state == MSG_DEVICE_HW_STATE_OFF); |
| |
| return 0; |
| } |
| |
| /** |
| * ti_sci_cmd_dev_is_on() - Check if the device is requested to be ON |
| * @handle: Pointer to TISCI handle |
| * @id: Device Identifier |
| * @r_state: true if requested to be ON |
| * @curr_state: true if currently ON and active |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_dev_is_on(const struct ti_sci_handle *handle, u32 id, |
| bool *r_state, bool *curr_state) |
| { |
| int ret; |
| u8 p_state, c_state; |
| |
| if (!r_state && !curr_state) |
| return -EINVAL; |
| |
| ret = |
| ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state); |
| if (ret) |
| return ret; |
| |
| if (r_state) |
| *r_state = (p_state == MSG_DEVICE_SW_STATE_ON); |
| if (curr_state) |
| *curr_state = (c_state == MSG_DEVICE_HW_STATE_ON); |
| |
| return 0; |
| } |
| |
| /** |
| * ti_sci_cmd_dev_is_trans() - Check if the device is currently transitioning |
| * @handle: Pointer to TISCI handle |
| * @id: Device Identifier |
| * @curr_state: true if currently transitioning. |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_dev_is_trans(const struct ti_sci_handle *handle, u32 id, |
| bool *curr_state) |
| { |
| int ret; |
| u8 state; |
| |
| if (!curr_state) |
| return -EINVAL; |
| |
| ret = ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &state); |
| if (ret) |
| return ret; |
| |
| *curr_state = (state == MSG_DEVICE_HW_STATE_TRANS); |
| |
| return 0; |
| } |
| |
| /** |
| * ti_sci_cmd_set_device_resets() - command to set resets for device managed |
| * by TISCI |
| * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle |
| * @id: Device Identifier |
| * @reset_state: Device specific reset bit field |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_set_device_resets(const struct ti_sci_handle *handle, |
| u32 id, u32 reset_state) |
| { |
| struct ti_sci_msg_req_set_device_resets req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_DEVICE_RESETS, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.id = id; |
| req.resets = reset_state; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_get_device_resets() - Get reset state for device managed |
| * by TISCI |
| * @handle: Pointer to TISCI handle |
| * @id: Device Identifier |
| * @reset_state: Pointer to reset state to populate |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_get_device_resets(const struct ti_sci_handle *handle, |
| u32 id, u32 *reset_state) |
| { |
| return ti_sci_get_device_state(handle, id, NULL, reset_state, NULL, |
| NULL); |
| } |
| |
| /** |
| * ti_sci_set_clock_state() - Set clock state helper |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @flags: Header flags as needed |
| * @state: State to request for the clock. |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_set_clock_state(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id, |
| u32 flags, u8 state) |
| { |
| struct ti_sci_msg_req_set_clock_state req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_CLOCK_STATE, |
| flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.dev_id = dev_id; |
| req.clk_id = clk_id; |
| req.request_state = state; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_get_clock_state() - Get clock state helper |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @programmed_state: State requested for clock to move to |
| * @current_state: State that the clock is currently in |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_get_clock_state(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id, |
| u8 *programmed_state, u8 *current_state) |
| { |
| struct ti_sci_msg_resp_get_clock_state *resp; |
| struct ti_sci_msg_req_get_clock_state req; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| if (!programmed_state && !current_state) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_CLOCK_STATE, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.dev_id = dev_id; |
| req.clk_id = clk_id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| resp = (struct ti_sci_msg_resp_get_clock_state *)xfer->tx_message.buf; |
| |
| if (programmed_state) |
| *programmed_state = resp->programmed_state; |
| if (current_state) |
| *current_state = resp->current_state; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_get_clock() - Get control of a clock from TI SCI |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @needs_ssc: 'true' if Spread Spectrum clock is desired, else 'false' |
| * @can_change_freq: 'true' if frequency change is desired, else 'false' |
| * @enable_input_term: 'true' if input termination is desired, else 'false' |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_get_clock(const struct ti_sci_handle *handle, u32 dev_id, |
| u8 clk_id, bool needs_ssc, bool can_change_freq, |
| bool enable_input_term) |
| { |
| u32 flags = 0; |
| |
| flags |= needs_ssc ? MSG_FLAG_CLOCK_ALLOW_SSC : 0; |
| flags |= can_change_freq ? MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE : 0; |
| flags |= enable_input_term ? MSG_FLAG_CLOCK_INPUT_TERM : 0; |
| |
| return ti_sci_set_clock_state(handle, dev_id, clk_id, flags, |
| MSG_CLOCK_SW_STATE_REQ); |
| } |
| |
| /** |
| * ti_sci_cmd_idle_clock() - Idle a clock which is in our control |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * |
| * NOTE: This clock must have been requested by get_clock previously. |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_idle_clock(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id) |
| { |
| return ti_sci_set_clock_state(handle, dev_id, clk_id, 0, |
| MSG_CLOCK_SW_STATE_UNREQ); |
| } |
| |
| /** |
| * ti_sci_cmd_put_clock() - Release a clock from our control back to TISCI |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * |
| * NOTE: This clock must have been requested by get_clock previously. |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_put_clock(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id) |
| { |
| return ti_sci_set_clock_state(handle, dev_id, clk_id, 0, |
| MSG_CLOCK_SW_STATE_AUTO); |
| } |
| |
| /** |
| * ti_sci_cmd_clk_is_auto() - Is the clock being auto managed |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @req_state: state indicating if the clock is auto managed |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_clk_is_auto(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id, bool *req_state) |
| { |
| u8 state = 0; |
| int ret; |
| |
| if (!req_state) |
| return -EINVAL; |
| |
| ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, &state, NULL); |
| if (ret) |
| return ret; |
| |
| *req_state = (state == MSG_CLOCK_SW_STATE_AUTO); |
| return 0; |
| } |
| |
| /** |
| * ti_sci_cmd_clk_is_on() - Is the clock ON |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @req_state: state indicating if the clock is managed by us and enabled |
| * @curr_state: state indicating if the clock is ready for operation |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_clk_is_on(const struct ti_sci_handle *handle, u32 dev_id, |
| u8 clk_id, bool *req_state, bool *curr_state) |
| { |
| u8 c_state = 0, r_state = 0; |
| int ret; |
| |
| if (!req_state && !curr_state) |
| return -EINVAL; |
| |
| ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, |
| &r_state, &c_state); |
| if (ret) |
| return ret; |
| |
| if (req_state) |
| *req_state = (r_state == MSG_CLOCK_SW_STATE_REQ); |
| if (curr_state) |
| *curr_state = (c_state == MSG_CLOCK_HW_STATE_READY); |
| return 0; |
| } |
| |
| /** |
| * ti_sci_cmd_clk_is_off() - Is the clock OFF |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @req_state: state indicating if the clock is managed by us and disabled |
| * @curr_state: state indicating if the clock is NOT ready for operation |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_clk_is_off(const struct ti_sci_handle *handle, u32 dev_id, |
| u8 clk_id, bool *req_state, bool *curr_state) |
| { |
| u8 c_state = 0, r_state = 0; |
| int ret; |
| |
| if (!req_state && !curr_state) |
| return -EINVAL; |
| |
| ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, |
| &r_state, &c_state); |
| if (ret) |
| return ret; |
| |
| if (req_state) |
| *req_state = (r_state == MSG_CLOCK_SW_STATE_UNREQ); |
| if (curr_state) |
| *curr_state = (c_state == MSG_CLOCK_HW_STATE_NOT_READY); |
| return 0; |
| } |
| |
| /** |
| * ti_sci_cmd_clk_set_parent() - Set the clock source of a specific device clock |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @parent_id: Parent clock identifier to set |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_clk_set_parent(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id, u8 parent_id) |
| { |
| struct ti_sci_msg_req_set_clock_parent req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_CLOCK_PARENT, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.dev_id = dev_id; |
| req.clk_id = clk_id; |
| req.parent_id = parent_id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_clk_get_parent() - Get current parent clock source |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @parent_id: Current clock parent |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_clk_get_parent(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id, u8 *parent_id) |
| { |
| struct ti_sci_msg_resp_get_clock_parent *resp; |
| struct ti_sci_msg_req_get_clock_parent req; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle || !parent_id) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_CLOCK_PARENT, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.dev_id = dev_id; |
| req.clk_id = clk_id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| *parent_id = resp->parent_id; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_clk_get_num_parents() - Get num parents of the current clk source |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @num_parents: Returns he number of parents to the current clock. |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_clk_get_num_parents(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id, |
| u8 *num_parents) |
| { |
| struct ti_sci_msg_resp_get_clock_num_parents *resp; |
| struct ti_sci_msg_req_get_clock_num_parents req; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle || !num_parents) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.dev_id = dev_id; |
| req.clk_id = clk_id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| resp = (struct ti_sci_msg_resp_get_clock_num_parents *) |
| xfer->tx_message.buf; |
| |
| *num_parents = resp->num_parents; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_clk_get_match_freq() - Find a good match for frequency |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @min_freq: The minimum allowable frequency in Hz. This is the minimum |
| * allowable programmed frequency and does not account for clock |
| * tolerances and jitter. |
| * @target_freq: The target clock frequency in Hz. A frequency will be |
| * processed as close to this target frequency as possible. |
| * @max_freq: The maximum allowable frequency in Hz. This is the maximum |
| * allowable programmed frequency and does not account for clock |
| * tolerances and jitter. |
| * @match_freq: Frequency match in Hz response. |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_clk_get_match_freq(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id, u64 min_freq, |
| u64 target_freq, u64 max_freq, |
| u64 *match_freq) |
| { |
| struct ti_sci_msg_resp_query_clock_freq *resp; |
| struct ti_sci_msg_req_query_clock_freq req; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle || !match_freq) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_QUERY_CLOCK_FREQ, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.dev_id = dev_id; |
| req.clk_id = clk_id; |
| req.min_freq_hz = min_freq; |
| req.target_freq_hz = target_freq; |
| req.max_freq_hz = max_freq; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| resp = (struct ti_sci_msg_resp_query_clock_freq *)xfer->tx_message.buf; |
| |
| *match_freq = resp->freq_hz; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_clk_set_freq() - Set a frequency for clock |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @min_freq: The minimum allowable frequency in Hz. This is the minimum |
| * allowable programmed frequency and does not account for clock |
| * tolerances and jitter. |
| * @target_freq: The target clock frequency in Hz. A frequency will be |
| * processed as close to this target frequency as possible. |
| * @max_freq: The maximum allowable frequency in Hz. This is the maximum |
| * allowable programmed frequency and does not account for clock |
| * tolerances and jitter. |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_clk_set_freq(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id, u64 min_freq, |
| u64 target_freq, u64 max_freq) |
| { |
| struct ti_sci_msg_req_set_clock_freq req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_CLOCK_FREQ, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.dev_id = dev_id; |
| req.clk_id = clk_id; |
| req.min_freq_hz = min_freq; |
| req.target_freq_hz = target_freq; |
| req.max_freq_hz = max_freq; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_clk_get_freq() - Get current frequency |
| * @handle: pointer to TI SCI handle |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has it's own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @freq: Currently frequency in Hz |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_clk_get_freq(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 clk_id, u64 *freq) |
| { |
| struct ti_sci_msg_resp_get_clock_freq *resp; |
| struct ti_sci_msg_req_get_clock_freq req; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle || !freq) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_CLOCK_FREQ, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.dev_id = dev_id; |
| req.clk_id = clk_id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| resp = (struct ti_sci_msg_resp_get_clock_freq *)xfer->tx_message.buf; |
| |
| *freq = resp->freq_hz; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_core_reboot() - Command to request system reset |
| * @handle: pointer to TI SCI handle |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle) |
| { |
| struct ti_sci_msg_req_reboot req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SYS_RESET, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.domain = 0; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_get_resource_range - Helper to get a range of resources assigned |
| * to a host. Resource is uniquely identified by |
| * type and subtype. |
| * @handle: Pointer to TISCI handle. |
| * @dev_id: TISCI device ID. |
| * @subtype: Resource assignment subtype that is being requested |
| * from the given device. |
| * @s_host: Host processor ID to which the resources are allocated |
| * @range_start: Start index of the resource range |
| * @range_num: Number of resources in the range |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_get_resource_range(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 subtype, u8 s_host, |
| u16 *range_start, u16 *range_num) |
| { |
| struct ti_sci_msg_resp_get_resource_range *resp; |
| struct ti_sci_msg_req_get_resource_range req; |
| struct ti_sci_xfer *xfer; |
| struct ti_sci_info *info; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_RESOURCE_RANGE, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| |
| req.secondary_host = s_host; |
| req.type = dev_id & MSG_RM_RESOURCE_TYPE_MASK; |
| req.subtype = subtype & MSG_RM_RESOURCE_SUBTYPE_MASK; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| goto fail; |
| |
| resp = (struct ti_sci_msg_resp_get_resource_range *)xfer->tx_message.buf; |
| if (!resp->range_start && !resp->range_num) { |
| ret = -ENODEV; |
| } else { |
| *range_start = resp->range_start; |
| *range_num = resp->range_num; |
| }; |
| |
| fail: |
| return ret; |
| } |
| |
| static int __maybe_unused |
| ti_sci_cmd_get_resource_range_static(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 subtype, |
| u16 *range_start, u16 *range_num) |
| { |
| struct ti_sci_resource_static_data *data; |
| int i = 0; |
| |
| while (1) { |
| data = &rm_static_data[i]; |
| |
| if (!data->dev_id) |
| return -EINVAL; |
| |
| if (data->dev_id != dev_id || data->subtype != subtype) { |
| i++; |
| continue; |
| } |
| |
| *range_start = data->range_start; |
| *range_num = data->range_num; |
| |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| /** |
| * ti_sci_cmd_get_resource_range - Get a range of resources assigned to host |
| * that is same as ti sci interface host. |
| * @handle: Pointer to TISCI handle. |
| * @dev_id: TISCI device ID. |
| * @subtype: Resource assignment subtype that is being requested |
| * from the given device. |
| * @range_start: Start index of the resource range |
| * @range_num: Number of resources in the range |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int ti_sci_cmd_get_resource_range(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 subtype, |
| u16 *range_start, u16 *range_num) |
| { |
| return ti_sci_get_resource_range(handle, dev_id, subtype, |
| TI_SCI_IRQ_SECONDARY_HOST_INVALID, |
| range_start, range_num); |
| } |
| |
| /** |
| * ti_sci_cmd_get_resource_range_from_shost - Get a range of resources |
| * assigned to a specified host. |
| * @handle: Pointer to TISCI handle. |
| * @dev_id: TISCI device ID. |
| * @subtype: Resource assignment subtype that is being requested |
| * from the given device. |
| * @s_host: Host processor ID to which the resources are allocated |
| * @range_start: Start index of the resource range |
| * @range_num: Number of resources in the range |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static |
| int ti_sci_cmd_get_resource_range_from_shost(const struct ti_sci_handle *handle, |
| u32 dev_id, u8 subtype, u8 s_host, |
| u16 *range_start, u16 *range_num) |
| { |
| return ti_sci_get_resource_range(handle, dev_id, subtype, s_host, |
| range_start, range_num); |
| } |
| |
| /** |
| * ti_sci_cmd_query_msmc() - Command to query currently available msmc memory |
| * @handle: pointer to TI SCI handle |
| * @msms_start: MSMC start as returned by tisci |
| * @msmc_end: MSMC end as returned by tisci |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_query_msmc(const struct ti_sci_handle *handle, |
| u64 *msmc_start, u64 *msmc_end) |
| { |
| struct ti_sci_msg_resp_query_msmc *resp; |
| struct ti_sci_msg_hdr req; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_QUERY_MSMC, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| resp = (struct ti_sci_msg_resp_query_msmc *)xfer->tx_message.buf; |
| |
| *msmc_start = ((u64)resp->msmc_start_high << TISCI_ADDR_HIGH_SHIFT) | |
| resp->msmc_start_low; |
| *msmc_end = ((u64)resp->msmc_end_high << TISCI_ADDR_HIGH_SHIFT) | |
| resp->msmc_end_low; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_proc_request() - Command to request a physical processor control |
| * @handle: Pointer to TI SCI handle |
| * @proc_id: Processor ID this request is for |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_proc_request(const struct ti_sci_handle *handle, |
| u8 proc_id) |
| { |
| struct ti_sci_msg_req_proc_request req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_REQUEST, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.processor_id = proc_id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_proc_release() - Command to release a physical processor control |
| * @handle: Pointer to TI SCI handle |
| * @proc_id: Processor ID this request is for |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_proc_release(const struct ti_sci_handle *handle, |
| u8 proc_id) |
| { |
| struct ti_sci_msg_req_proc_release req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_RELEASE, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.processor_id = proc_id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_proc_handover() - Command to handover a physical processor |
| * control to a host in the processor's access |
| * control list. |
| * @handle: Pointer to TI SCI handle |
| * @proc_id: Processor ID this request is for |
| * @host_id: Host ID to get the control of the processor |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_proc_handover(const struct ti_sci_handle *handle, |
| u8 proc_id, u8 host_id) |
| { |
| struct ti_sci_msg_req_proc_handover req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_HANDOVER, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.processor_id = proc_id; |
| req.host_id = host_id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_set_proc_boot_cfg() - Command to set the processor boot |
| * configuration flags |
| * @handle: Pointer to TI SCI handle |
| * @proc_id: Processor ID this request is for |
| * @config_flags_set: Configuration flags to be set |
| * @config_flags_clear: Configuration flags to be cleared. |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_set_proc_boot_cfg(const struct ti_sci_handle *handle, |
| u8 proc_id, u64 bootvector, |
| u32 config_flags_set, |
| u32 config_flags_clear) |
| { |
| struct ti_sci_msg_req_set_proc_boot_config req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_SET_PROC_BOOT_CONFIG, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.processor_id = proc_id; |
| req.bootvector_low = bootvector & TISCI_ADDR_LOW_MASK; |
| req.bootvector_high = (bootvector & TISCI_ADDR_HIGH_MASK) >> |
| TISCI_ADDR_HIGH_SHIFT; |
| req.config_flags_set = config_flags_set; |
| req.config_flags_clear = config_flags_clear; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_set_proc_boot_ctrl() - Command to set the processor boot |
| * control flags |
| * @handle: Pointer to TI SCI handle |
| * @proc_id: Processor ID this request is for |
| * @control_flags_set: Control flags to be set |
| * @control_flags_clear: Control flags to be cleared |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_set_proc_boot_ctrl(const struct ti_sci_handle *handle, |
| u8 proc_id, u32 control_flags_set, |
| u32 control_flags_clear) |
| { |
| struct ti_sci_msg_req_set_proc_boot_ctrl req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_SET_PROC_BOOT_CTRL, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.processor_id = proc_id; |
| req.control_flags_set = control_flags_set; |
| req.control_flags_clear = control_flags_clear; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_proc_auth_boot_image() - Command to authenticate and load the |
| * image and then set the processor configuration flags. |
| * @handle: Pointer to TI SCI handle |
| * @image_addr: Memory address at which payload image and certificate is |
| * located in memory, this is updated if the image data is |
| * moved during authentication. |
| * @image_size: This is updated with the final size of the image after |
| * authentication. |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_proc_auth_boot_image(const struct ti_sci_handle *handle, |
| u64 *image_addr, u32 *image_size) |
| { |
| struct ti_sci_msg_req_proc_auth_boot_image req; |
| struct ti_sci_msg_resp_proc_auth_boot_image *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_AUTH_BOOT_IMIAGE, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.cert_addr_low = *image_addr & TISCI_ADDR_LOW_MASK; |
| req.cert_addr_high = (*image_addr & TISCI_ADDR_HIGH_MASK) >> |
| TISCI_ADDR_HIGH_SHIFT; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| resp = (struct ti_sci_msg_resp_proc_auth_boot_image *)xfer->tx_message.buf; |
| |
| *image_addr = (resp->image_addr_low & TISCI_ADDR_LOW_MASK) | |
| (((u64)resp->image_addr_high << |
| TISCI_ADDR_HIGH_SHIFT) & TISCI_ADDR_HIGH_MASK); |
| *image_size = resp->image_size; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_get_proc_boot_status() - Command to get the processor boot status |
| * @handle: Pointer to TI SCI handle |
| * @proc_id: Processor ID this request is for |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_get_proc_boot_status(const struct ti_sci_handle *handle, |
| u8 proc_id, u64 *bv, u32 *cfg_flags, |
| u32 *ctrl_flags, u32 *sts_flags) |
| { |
| struct ti_sci_msg_resp_get_proc_boot_status *resp; |
| struct ti_sci_msg_req_get_proc_boot_status req; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_GET_PROC_BOOT_STATUS, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.processor_id = proc_id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| resp = (struct ti_sci_msg_resp_get_proc_boot_status *) |
| xfer->tx_message.buf; |
| |
| *bv = (resp->bootvector_low & TISCI_ADDR_LOW_MASK) | |
| (((u64)resp->bootvector_high << |
| TISCI_ADDR_HIGH_SHIFT) & TISCI_ADDR_HIGH_MASK); |
| *cfg_flags = resp->config_flags; |
| *ctrl_flags = resp->control_flags; |
| *sts_flags = resp->status_flags; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_proc_wait_boot_status_no_wait() - Helper function to wait for a |
| * processor boot status without requesting or |
| * waiting for a response. |
| * @proc_id: Processor ID this request is for |
| * @num_wait_iterations: Total number of iterations we will check before |
| * we will timeout and give up |
| * @num_match_iterations: How many iterations should we have continued |
| * status to account for status bits glitching. |
| * This is to make sure that match occurs for |
| * consecutive checks. This implies that the |
| * worst case should consider that the stable |
| * time should at the worst be num_wait_iterations |
| * num_match_iterations to prevent timeout. |
| * @delay_per_iteration_us: Specifies how long to wait (in micro seconds) |
| * between each status checks. This is the minimum |
| * duration, and overhead of register reads and |
| * checks are on top of this and can vary based on |
| * varied conditions. |
| * @delay_before_iterations_us: Specifies how long to wait (in micro seconds) |
| * before the very first check in the first |
| * iteration of status check loop. This is the |
| * minimum duration, and overhead of register |
| * reads and checks are. |
| * @status_flags_1_set_all_wait:If non-zero, Specifies that all bits of the |
| * status matching this field requested MUST be 1. |
| * @status_flags_1_set_any_wait:If non-zero, Specifies that at least one of the |
| * bits matching this field requested MUST be 1. |
| * @status_flags_1_clr_all_wait:If non-zero, Specifies that all bits of the |
| * status matching this field requested MUST be 0. |
| * @status_flags_1_clr_any_wait:If non-zero, Specifies that at least one of the |
| * bits matching this field requested MUST be 0. |
| * |
| * Return: 0 if all goes well, else appropriate error message |
| */ |
| static int |
| ti_sci_proc_wait_boot_status_no_wait(const struct ti_sci_handle *handle, |
| u8 proc_id, |
| u8 num_wait_iterations, |
| u8 num_match_iterations, |
| u8 delay_per_iteration_us, |
| u8 delay_before_iterations_us, |
| u32 status_flags_1_set_all_wait, |
| u32 status_flags_1_set_any_wait, |
| u32 status_flags_1_clr_all_wait, |
| u32 status_flags_1_clr_any_wait) |
| { |
| struct ti_sci_msg_req_wait_proc_boot_status req; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_WAIT_PROC_BOOT_STATUS, |
| TI_SCI_FLAG_REQ_GENERIC_NORESPONSE, |
| (u32 *)&req, sizeof(req), 0); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.processor_id = proc_id; |
| req.num_wait_iterations = num_wait_iterations; |
| req.num_match_iterations = num_match_iterations; |
| req.delay_per_iteration_us = delay_per_iteration_us; |
| req.delay_before_iterations_us = delay_before_iterations_us; |
| req.status_flags_1_set_all_wait = status_flags_1_set_all_wait; |
| req.status_flags_1_set_any_wait = status_flags_1_set_any_wait; |
| req.status_flags_1_clr_all_wait = status_flags_1_clr_all_wait; |
| req.status_flags_1_clr_any_wait = status_flags_1_clr_any_wait; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_proc_shutdown_no_wait() - Command to shutdown a core without |
| * requesting or waiting for a response. Note that this API call |
| * should be followed by placing the respective processor into |
| * either WFE or WFI mode. |
| * @handle: Pointer to TI SCI handle |
| * @proc_id: Processor ID this request is for |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_proc_shutdown_no_wait(const struct ti_sci_handle *handle, |
| u8 proc_id) |
| { |
| int ret; |
| struct ti_sci_info *info; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| /* |
| * Send the core boot status wait message waiting for either WFE or |
| * WFI without requesting or waiting for a TISCI response with the |
| * maximum wait time to give us the best chance to get to the WFE/WFI |
| * command that should follow the invocation of this API before the |
| * DMSC-internal processing of this command times out. Note that |
| * waiting for the R5 WFE/WFI flags will also work on an ARMV8 type |
| * core as the related flag bit positions are the same. |
| */ |
| ret = ti_sci_proc_wait_boot_status_no_wait(handle, proc_id, |
| U8_MAX, 100, U8_MAX, U8_MAX, |
| 0, PROC_BOOT_STATUS_FLAG_R5_WFE | PROC_BOOT_STATUS_FLAG_R5_WFI, |
| 0, 0); |
| if (ret) { |
| dev_err(info->dev, "Sending core %u wait message fail %d\n", |
| proc_id, ret); |
| return ret; |
| } |
| |
| /* |
| * Release a processor managed by TISCI without requesting or waiting |
| * for a response. |
| */ |
| ret = ti_sci_set_device_state_no_wait(handle, proc_id, 0, |
| MSG_DEVICE_SW_STATE_AUTO_OFF); |
| if (ret) |
| dev_err(info->dev, "Sending core %u shutdown message fail %d\n", |
| proc_id, ret); |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_ring_config() - configure RA ring |
| * @handle: pointer to TI SCI handle |
| * @valid_params: Bitfield defining validity of ring configuration parameters. |
| * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated |
| * @index: Ring index. |
| * @addr_lo: The ring base address lo 32 bits |
| * @addr_hi: The ring base address hi 32 bits |
| * @count: Number of ring elements. |
| * @mode: The mode of the ring |
| * @size: The ring element size. |
| * @order_id: Specifies the ring's bus order ID. |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| * |
| * See @ti_sci_msg_rm_ring_cfg_req for more info. |
| */ |
| static int ti_sci_cmd_ring_config(const struct ti_sci_handle *handle, |
| u32 valid_params, u16 nav_id, u16 index, |
| u32 addr_lo, u32 addr_hi, u32 count, |
| u8 mode, u8 size, u8 order_id) |
| { |
| struct ti_sci_msg_rm_ring_cfg_resp *resp; |
| struct ti_sci_msg_rm_ring_cfg_req req; |
| struct ti_sci_xfer *xfer; |
| struct ti_sci_info *info; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_RM_RING_CFG, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.valid_params = valid_params; |
| req.nav_id = nav_id; |
| req.index = index; |
| req.addr_lo = addr_lo; |
| req.addr_hi = addr_hi; |
| req.count = count; |
| req.mode = mode; |
| req.size = size; |
| req.order_id = order_id; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| goto fail; |
| |
| fail: |
| dev_dbg(info->dev, "RM_RA:config ring %u ret:%d\n", index, ret); |
| return ret; |
| } |
| |
| static int ti_sci_cmd_rm_psil_pair(const struct ti_sci_handle *handle, |
| u32 nav_id, u32 src_thread, u32 dst_thread) |
| { |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_msg_psil_pair req; |
| struct ti_sci_xfer *xfer; |
| struct ti_sci_info *info; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_RM_PSIL_PAIR, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.nav_id = nav_id; |
| req.src_thread = src_thread; |
| req.dst_thread = dst_thread; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| goto fail; |
| |
| fail: |
| dev_dbg(info->dev, "RM_PSIL: nav: %u link pair %u->%u ret:%u\n", |
| nav_id, src_thread, dst_thread, ret); |
| return ret; |
| } |
| |
| static int ti_sci_cmd_rm_psil_unpair(const struct ti_sci_handle *handle, |
| u32 nav_id, u32 src_thread, u32 dst_thread) |
| { |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_msg_psil_unpair req; |
| struct ti_sci_xfer *xfer; |
| struct ti_sci_info *info; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_RM_PSIL_UNPAIR, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.nav_id = nav_id; |
| req.src_thread = src_thread; |
| req.dst_thread = dst_thread; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| goto fail; |
| |
| fail: |
| dev_dbg(info->dev, "RM_PSIL: link unpair %u->%u ret:%u\n", |
| src_thread, dst_thread, ret); |
| return ret; |
| } |
| |
| static int ti_sci_cmd_rm_udmap_tx_ch_cfg( |
| const struct ti_sci_handle *handle, |
| const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params) |
| { |
| struct ti_sci_msg_rm_udmap_tx_ch_cfg_resp *resp; |
| struct ti_sci_msg_rm_udmap_tx_ch_cfg_req req; |
| struct ti_sci_xfer *xfer; |
| struct ti_sci_info *info; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_RM_UDMAP_TX_CH_CFG, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| req.valid_params = params->valid_params; |
| req.nav_id = params->nav_id; |
| req.index = params->index; |
| req.tx_pause_on_err = params->tx_pause_on_err; |
| req.tx_filt_einfo = params->tx_filt_einfo; |
| req.tx_filt_pswords = params->tx_filt_pswords; |
| req.tx_atype = params->tx_atype; |
| req.tx_chan_type = params->tx_chan_type; |
| req.tx_supr_tdpkt = params->tx_supr_tdpkt; |
| req.tx_fetch_size = params->tx_fetch_size; |
| req.tx_credit_count = params->tx_credit_count; |
| req.txcq_qnum = params->txcq_qnum; |
| req.tx_priority = params->tx_priority; |
| req.tx_qos = params->tx_qos; |
| req.tx_orderid = params->tx_orderid; |
| req.fdepth = params->fdepth; |
| req.tx_sched_priority = params->tx_sched_priority; |
| req.tx_burst_size = params->tx_burst_size; |
| req.tx_tdtype = params->tx_tdtype; |
| req.extended_ch_type = params->extended_ch_type; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| goto fail; |
| |
| fail: |
| dev_dbg(info->dev, "TX_CH_CFG: chn %u ret:%u\n", params->index, ret); |
| return ret; |
| } |
| |
| static int ti_sci_cmd_rm_udmap_rx_ch_cfg( |
| const struct ti_sci_handle *handle, |
| const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params) |
| { |
| struct ti_sci_msg_rm_udmap_rx_ch_cfg_resp *resp; |
| struct ti_sci_msg_rm_udmap_rx_ch_cfg_req req; |
| struct ti_sci_xfer *xfer; |
| struct ti_sci_info *info; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_RM_UDMAP_RX_CH_CFG, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| |
| req.valid_params = params->valid_params; |
| req.nav_id = params->nav_id; |
| req.index = params->index; |
| req.rx_fetch_size = params->rx_fetch_size; |
| req.rxcq_qnum = params->rxcq_qnum; |
| req.rx_priority = params->rx_priority; |
| req.rx_qos = params->rx_qos; |
| req.rx_orderid = params->rx_orderid; |
| req.rx_sched_priority = params->rx_sched_priority; |
| req.flowid_start = params->flowid_start; |
| req.flowid_cnt = params->flowid_cnt; |
| req.rx_pause_on_err = params->rx_pause_on_err; |
| req.rx_atype = params->rx_atype; |
| req.rx_chan_type = params->rx_chan_type; |
| req.rx_ignore_short = params->rx_ignore_short; |
| req.rx_ignore_long = params->rx_ignore_long; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| goto fail; |
| |
| fail: |
| dev_dbg(info->dev, "RX_CH_CFG: chn %u ret:%d\n", params->index, ret); |
| return ret; |
| } |
| |
| static int ti_sci_cmd_rm_udmap_rx_flow_cfg( |
| const struct ti_sci_handle *handle, |
| const struct ti_sci_msg_rm_udmap_flow_cfg *params) |
| { |
| struct ti_sci_msg_rm_udmap_flow_cfg_resp *resp; |
| struct ti_sci_msg_rm_udmap_flow_cfg_req req; |
| struct ti_sci_xfer *xfer; |
| struct ti_sci_info *info; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_RM_UDMAP_FLOW_CFG, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| |
| req.valid_params = params->valid_params; |
| req.nav_id = params->nav_id; |
| req.flow_index = params->flow_index; |
| req.rx_einfo_present = params->rx_einfo_present; |
| req.rx_psinfo_present = params->rx_psinfo_present; |
| req.rx_error_handling = params->rx_error_handling; |
| req.rx_desc_type = params->rx_desc_type; |
| req.rx_sop_offset = params->rx_sop_offset; |
| req.rx_dest_qnum = params->rx_dest_qnum; |
| req.rx_src_tag_hi = params->rx_src_tag_hi; |
| req.rx_src_tag_lo = params->rx_src_tag_lo; |
| req.rx_dest_tag_hi = params->rx_dest_tag_hi; |
| req.rx_dest_tag_lo = params->rx_dest_tag_lo; |
| req.rx_src_tag_hi_sel = params->rx_src_tag_hi_sel; |
| req.rx_src_tag_lo_sel = params->rx_src_tag_lo_sel; |
| req.rx_dest_tag_hi_sel = params->rx_dest_tag_hi_sel; |
| req.rx_dest_tag_lo_sel = params->rx_dest_tag_lo_sel; |
| req.rx_fdq0_sz0_qnum = params->rx_fdq0_sz0_qnum; |
| req.rx_fdq1_qnum = params->rx_fdq1_qnum; |
| req.rx_fdq2_qnum = params->rx_fdq2_qnum; |
| req.rx_fdq3_qnum = params->rx_fdq3_qnum; |
| req.rx_ps_location = params->rx_ps_location; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| goto fail; |
| |
| fail: |
| dev_dbg(info->dev, "RX_FL_CFG: %u ret:%d\n", params->flow_index, ret); |
| return ret; |
| } |
| |
| /** |
| * ti_sci_cmd_set_fwl_region() - Request for configuring a firewall region |
| * @handle: pointer to TI SCI handle |
| * @region: region configuration parameters |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_set_fwl_region(const struct ti_sci_handle *handle, |
| const struct ti_sci_msg_fwl_region *region) |
| { |
| struct ti_sci_msg_fwl_set_firewall_region_req req; |
| struct ti_sci_msg_hdr *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_SET, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| |
| req.fwl_id = region->fwl_id; |
| req.region = region->region; |
| req.n_permission_regs = region->n_permission_regs; |
| req.control = region->control; |
| req.permissions[0] = region->permissions[0]; |
| req.permissions[1] = region->permissions[1]; |
| req.permissions[2] = region->permissions[2]; |
| req.start_address = region->start_address; |
| req.end_address = region->end_address; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /** |
| * ti_sci_cmd_get_fwl_region() - Request for getting a firewall region |
| * @handle: pointer to TI SCI handle |
| * @region: region configuration parameters |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_get_fwl_region(const struct ti_sci_handle *handle, |
| struct ti_sci_msg_fwl_region *region) |
| { |
| struct ti_sci_msg_fwl_get_firewall_region_req req; |
| struct ti_sci_msg_fwl_get_firewall_region_resp *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_GET, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| |
| req.fwl_id = region->fwl_id; |
| req.region = region->region; |
| req.n_permission_regs = region->n_permission_regs; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| resp = (struct ti_sci_msg_fwl_get_firewall_region_resp *)xfer->tx_message.buf; |
| |
| region->fwl_id = resp->fwl_id; |
| region->region = resp->region; |
| region->n_permission_regs = resp->n_permission_regs; |
| region->control = resp->control; |
| region->permissions[0] = resp->permissions[0]; |
| region->permissions[1] = resp->permissions[1]; |
| region->permissions[2] = resp->permissions[2]; |
| region->start_address = resp->start_address; |
| region->end_address = resp->end_address; |
| |
| return 0; |
| } |
| |
| /** |
| * ti_sci_cmd_change_fwl_owner() - Request for changing a firewall owner |
| * @handle: pointer to TI SCI handle |
| * @region: region configuration parameters |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| static int ti_sci_cmd_change_fwl_owner(const struct ti_sci_handle *handle, |
| struct ti_sci_msg_fwl_owner *owner) |
| { |
| struct ti_sci_msg_fwl_change_owner_info_req req; |
| struct ti_sci_msg_fwl_change_owner_info_resp *resp; |
| struct ti_sci_info *info; |
| struct ti_sci_xfer *xfer; |
| int ret = 0; |
| |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_ti_sci_info(handle); |
| |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_CHANGE_OWNER, |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, |
| (u32 *)&req, sizeof(req), sizeof(*resp)); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| return ret; |
| } |
| |
| req.fwl_id = owner->fwl_id; |
| req.region = owner->region; |
| req.owner_index = owner->owner_index; |
| |
| ret = ti_sci_do_xfer(info, xfer); |
| if (ret) |
| return ret; |
| |
| resp = (struct ti_sci_msg_fwl_change_owner_info_resp *)xfer->tx_message.buf; |
| |
| owner->fwl_id = resp->fwl_id; |
| owner->region = resp->region; |
| owner->owner_index = resp->owner_index; |
| owner->owner_privid = resp->owner_privid; |
| owner->owner_permission_bits = resp->owner_permission_bits; |
| |
| return ret; |
| } |
| |
| /* |
| * ti_sci_setup_ops() - Setup the operations structures |
| * @info: pointer to TISCI pointer |
| */ |
| static void ti_sci_setup_ops(struct ti_sci_info *info) |
| { |
| struct ti_sci_ops *ops = &info->handle.ops; |
| struct ti_sci_board_ops *bops = &ops->board_ops; |
| struct ti_sci_dev_ops *dops = &ops->dev_ops; |
| struct ti_sci_clk_ops *cops = &ops->clk_ops; |
| struct ti_sci_core_ops *core_ops = &ops->core_ops; |
| struct ti_sci_rm_core_ops *rm_core_ops = &ops->rm_core_ops; |
| struct ti_sci_proc_ops *pops = &ops->proc_ops; |
| struct ti_sci_rm_ringacc_ops *rops = &ops->rm_ring_ops; |
| struct ti_sci_rm_psil_ops *psilops = &ops->rm_psil_ops; |
| struct ti_sci_rm_udmap_ops *udmap_ops = &ops->rm_udmap_ops; |
| struct ti_sci_fwl_ops *fwl_ops = &ops->fwl_ops; |
| |
| bops->board_config = ti_sci_cmd_set_board_config; |
| bops->board_config_rm = ti_sci_cmd_set_board_config_rm; |
| bops->board_config_security = ti_sci_cmd_set_board_config_security; |
| bops->board_config_pm = ti_sci_cmd_set_board_config_pm; |
| |
| dops->get_device = ti_sci_cmd_get_device; |
| dops->get_device_exclusive = ti_sci_cmd_get_device_exclusive; |
| dops->idle_device = ti_sci_cmd_idle_device; |
| dops->idle_device_exclusive = ti_sci_cmd_idle_device_exclusive; |
| dops->put_device = ti_sci_cmd_put_device; |
| dops->is_valid = ti_sci_cmd_dev_is_valid; |
| dops->get_context_loss_count = ti_sci_cmd_dev_get_clcnt; |
| dops->is_idle = ti_sci_cmd_dev_is_idle; |
| dops->is_stop = ti_sci_cmd_dev_is_stop; |
| dops->is_on = ti_sci_cmd_dev_is_on; |
| dops->is_transitioning = ti_sci_cmd_dev_is_trans; |
| dops->set_device_resets = ti_sci_cmd_set_device_resets; |
| dops->get_device_resets = ti_sci_cmd_get_device_resets; |
| dops->release_exclusive_devices = ti_sci_cmd_release_exclusive_devices; |
| |
| cops->get_clock = ti_sci_cmd_get_clock; |
| cops->idle_clock = ti_sci_cmd_idle_clock; |
| cops->put_clock = ti_sci_cmd_put_clock; |
| cops->is_auto = ti_sci_cmd_clk_is_auto; |
| cops->is_on = ti_sci_cmd_clk_is_on; |
| cops->is_off = ti_sci_cmd_clk_is_off; |
| |
| cops->set_parent = ti_sci_cmd_clk_set_parent; |
| cops->get_parent = ti_sci_cmd_clk_get_parent; |
| cops->get_num_parents = ti_sci_cmd_clk_get_num_parents; |
| |
| cops->get_best_match_freq = ti_sci_cmd_clk_get_match_freq; |
| cops->set_freq = ti_sci_cmd_clk_set_freq; |
| cops->get_freq = ti_sci_cmd_clk_get_freq; |
| |
| core_ops->reboot_device = ti_sci_cmd_core_reboot; |
| core_ops->query_msmc = ti_sci_cmd_query_msmc; |
| |
| rm_core_ops->get_range = ti_sci_cmd_get_resource_range; |
| rm_core_ops->get_range_from_shost = |
| ti_sci_cmd_get_resource_range_from_shost; |
| |
| pops->proc_request = ti_sci_cmd_proc_request; |
| pops->proc_release = ti_sci_cmd_proc_release; |
| pops->proc_handover = ti_sci_cmd_proc_handover; |
| pops->set_proc_boot_cfg = ti_sci_cmd_set_proc_boot_cfg; |
| pops->set_proc_boot_ctrl = ti_sci_cmd_set_proc_boot_ctrl; |
| pops->proc_auth_boot_image = ti_sci_cmd_proc_auth_boot_image; |
| pops->get_proc_boot_status = ti_sci_cmd_get_proc_boot_status; |
| pops->proc_shutdown_no_wait = ti_sci_cmd_proc_shutdown_no_wait; |
| |
| rops->config = ti_sci_cmd_ring_config; |
| |
| psilops->pair = ti_sci_cmd_rm_psil_pair; |
| psilops->unpair = ti_sci_cmd_rm_psil_unpair; |
| |
| udmap_ops->tx_ch_cfg = ti_sci_cmd_rm_udmap_tx_ch_cfg; |
| udmap_ops->rx_ch_cfg = ti_sci_cmd_rm_udmap_rx_ch_cfg; |
| udmap_ops->rx_flow_cfg = ti_sci_cmd_rm_udmap_rx_flow_cfg; |
| |
| fwl_ops->set_fwl_region = ti_sci_cmd_set_fwl_region; |
| fwl_ops->get_fwl_region = ti_sci_cmd_get_fwl_region; |
| fwl_ops->change_fwl_owner = ti_sci_cmd_change_fwl_owner; |
| } |
| |
| /** |
| * ti_sci_get_handle_from_sysfw() - Get the TI SCI handle of the SYSFW |
| * @dev: Pointer to the SYSFW device |
| * |
| * Return: pointer to handle if successful, else EINVAL if invalid conditions |
| * are encountered. |
| */ |
| const |
| struct ti_sci_handle *ti_sci_get_handle_from_sysfw(struct udevice *sci_dev) |
| { |
| if (!sci_dev) |
| return ERR_PTR(-EINVAL); |
| |
| struct ti_sci_info *info = dev_get_priv(sci_dev); |
| |
| if (!info) |
| return ERR_PTR(-EINVAL); |
| |
| struct ti_sci_handle *handle = &info->handle; |
| |
| if (!handle) |
| return ERR_PTR(-EINVAL); |
| |
| return handle; |
| } |
| |
| /** |
| * ti_sci_get_handle() - Get the TI SCI handle for a device |
| * @dev: Pointer to device for which we want SCI handle |
| * |
| * Return: pointer to handle if successful, else EINVAL if invalid conditions |
| * are encountered. |
| */ |
| const struct ti_sci_handle *ti_sci_get_handle(struct udevice *dev) |
| { |
| if (!dev) |
| return ERR_PTR(-EINVAL); |
| |
| struct udevice *sci_dev = dev_get_parent(dev); |
| |
| return ti_sci_get_handle_from_sysfw(sci_dev); |
| } |
| |
| /** |
| * ti_sci_get_by_phandle() - Get the TI SCI handle using DT phandle |
| * @dev: device node |
| * @propname: property name containing phandle on TISCI node |
| * |
| * Return: pointer to handle if successful, else appropriate error value. |
| */ |
| const struct ti_sci_handle *ti_sci_get_by_phandle(struct udevice *dev, |
| const char *property) |
| { |
| struct ti_sci_info *entry, *info = NULL; |
| u32 phandle, err; |
| ofnode node; |
| |
| err = ofnode_read_u32(dev_ofnode(dev), property, &phandle); |
| if (err) |
| return ERR_PTR(err); |
| |
| node = ofnode_get_by_phandle(phandle); |
| if (!ofnode_valid(node)) |
| return ERR_PTR(-EINVAL); |
| |
| list_for_each_entry(entry, &ti_sci_list, list) |
| if (ofnode_equal(dev_ofnode(entry->dev), node)) { |
| info = entry; |
| break; |
| } |
| |
| if (!info) |
| return ERR_PTR(-ENODEV); |
| |
| return &info->handle; |
| } |
| |
| /** |
| * ti_sci_of_to_info() - generate private data from device tree |
| * @dev: corresponding system controller interface device |
| * @info: pointer to driver specific private data |
| * |
| * Return: 0 if all goes good, else appropriate error message. |
| */ |
| static int ti_sci_of_to_info(struct udevice *dev, struct ti_sci_info *info) |
| { |
| int ret; |
| |
| ret = mbox_get_by_name(dev, "tx", &info->chan_tx); |
| if (ret) { |
| dev_err(dev, "%s: Acquiring Tx channel failed. ret = %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = mbox_get_by_name(dev, "rx", &info->chan_rx); |
| if (ret) { |
| dev_err(dev, "%s: Acquiring Rx channel failed. ret = %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| /* Notify channel is optional. Enable only if populated */ |
| ret = mbox_get_by_name(dev, "notify", &info->chan_notify); |
| if (ret) { |
| dev_dbg(dev, "%s: Acquiring notify channel failed. ret = %d\n", |
| __func__, ret); |
| } |
| |
| info->host_id = dev_read_u32_default(dev, "ti,host-id", |
| info->desc->default_host_id); |
| |
| info->is_secure = dev_read_bool(dev, "ti,secure-host"); |
| |
| return 0; |
| } |
| |
| /** |
| * ti_sci_probe() - Basic probe |
| * @dev: corresponding system controller interface device |
| * |
| * Return: 0 if all goes good, else appropriate error message. |
| */ |
| static int ti_sci_probe(struct udevice *dev) |
| { |
| struct ti_sci_info *info; |
| int ret; |
| |
| debug("%s(dev=%p)\n", __func__, dev); |
| |
| info = dev_get_priv(dev); |
| info->desc = (void *)dev_get_driver_data(dev); |
| |
| ret = ti_sci_of_to_info(dev, info); |
| if (ret) { |
| dev_err(dev, "%s: Probe failed with error %d\n", __func__, ret); |
| return ret; |
| } |
| |
| info->dev = dev; |
| info->seq = 0xA; |
| |
| list_add_tail(&info->list, &ti_sci_list); |
| ti_sci_setup_ops(info); |
| |
| ret = ti_sci_cmd_get_revision(&info->handle); |
| |
| INIT_LIST_HEAD(&info->dev_list); |
| |
| return ret; |
| } |
| |
| /** |
| * ti_sci_dm_probe() - Basic probe for DM to TIFS SCI |
| * @dev: corresponding system controller interface device |
| * |
| * Return: 0 if all goes good, else appropriate error message. |
| */ |
| static __maybe_unused int ti_sci_dm_probe(struct udevice *dev) |
| { |
| struct ti_sci_rm_core_ops *rm_core_ops; |
| struct ti_sci_rm_udmap_ops *udmap_ops; |
| struct ti_sci_rm_ringacc_ops *rops; |
| struct ti_sci_rm_psil_ops *psilops; |
| struct ti_sci_ops *ops; |
| struct ti_sci_info *info; |
| int ret; |
| |
| debug("%s(dev=%p)\n", __func__, dev); |
| |
| info = dev_get_priv(dev); |
| info->desc = (void *)dev_get_driver_data(dev); |
| |
| ret = ti_sci_of_to_info(dev, info); |
| if (ret) { |
| dev_err(dev, "%s: Probe failed with error %d\n", __func__, ret); |
| return ret; |
| } |
| |
| info->dev = dev; |
| info->seq = 0xA; |
| |
| list_add_tail(&info->list, &ti_sci_list); |
| |
| ops = &info->handle.ops; |
| |
| rm_core_ops = &ops->rm_core_ops; |
| rm_core_ops->get_range = ti_sci_cmd_get_resource_range_static; |
| |
| rops = &ops->rm_ring_ops; |
| rops->config = ti_sci_cmd_ring_config; |
| |
| psilops = &ops->rm_psil_ops; |
| psilops->pair = ti_sci_cmd_rm_psil_pair; |
| psilops->unpair = ti_sci_cmd_rm_psil_unpair; |
| |
| udmap_ops = &ops->rm_udmap_ops; |
| udmap_ops->tx_ch_cfg = ti_sci_cmd_rm_udmap_tx_ch_cfg; |
| udmap_ops->rx_ch_cfg = ti_sci_cmd_rm_udmap_rx_ch_cfg; |
| udmap_ops->rx_flow_cfg = ti_sci_cmd_rm_udmap_rx_flow_cfg; |
| |
| return ret; |
| } |
| |
| /* |
| * ti_sci_get_free_resource() - Get a free resource from TISCI resource. |
| * @res: Pointer to the TISCI resource |
| * |
| * Return: resource num if all went ok else TI_SCI_RESOURCE_NULL. |
| */ |
| u16 ti_sci_get_free_resource(struct ti_sci_resource *res) |
| { |
| u16 set, free_bit; |
| |
| for (set = 0; set < res->sets; set++) { |
| free_bit = find_first_zero_bit(res->desc[set].res_map, |
| res->desc[set].num); |
| if (free_bit != res->desc[set].num) { |
| set_bit(free_bit, res->desc[set].res_map); |
| return res->desc[set].start + free_bit; |
| } |
| } |
| |
| return TI_SCI_RESOURCE_NULL; |
| } |
| |
| /** |
| * ti_sci_release_resource() - Release a resource from TISCI resource. |
| * @res: Pointer to the TISCI resource |
| */ |
| void ti_sci_release_resource(struct ti_sci_resource *res, u16 id) |
| { |
| u16 set; |
| |
| for (set = 0; set < res->sets; set++) { |
| if (res->desc[set].start <= id && |
| (res->desc[set].num + res->desc[set].start) > id) |
| clear_bit(id - res->desc[set].start, |
| res->desc[set].res_map); |
| } |
| } |
| |
| /** |
| * devm_ti_sci_get_of_resource() - Get a TISCI resource assigned to a device |
| * @handle: TISCI handle |
| * @dev: Device pointer to which the resource is assigned |
| * @of_prop: property name by which the resource are represented |
| * |
| * Note: This function expects of_prop to be in the form of tuples |
| * <type, subtype>. Allocates and initializes ti_sci_resource structure |
| * for each of_prop. Client driver can directly call |
| * ti_sci_(get_free, release)_resource apis for handling the resource. |
| * |
| * Return: Pointer to ti_sci_resource if all went well else appropriate |
| * error pointer. |
| */ |
| struct ti_sci_resource * |
| devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle, |
| struct udevice *dev, u32 dev_id, char *of_prop) |
| { |
| u32 resource_subtype; |
| struct ti_sci_resource *res; |
| bool valid_set = false; |
| int sets, i, ret; |
| u32 *temp; |
| |
| res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL); |
| if (!res) |
| return ERR_PTR(-ENOMEM); |
| |
| sets = dev_read_size(dev, of_prop); |
| if (sets < 0) { |
| dev_err(dev, "%s resource type ids not available\n", of_prop); |
| return ERR_PTR(sets); |
| } |
| temp = malloc(sets); |
| sets /= sizeof(u32); |
| res->sets = sets; |
| |
| res->desc = devm_kcalloc(dev, res->sets, sizeof(*res->desc), |
| GFP_KERNEL); |
| if (!res->desc) |
| return ERR_PTR(-ENOMEM); |
| |
| ret = dev_read_u32_array(dev, of_prop, temp, res->sets); |
| if (ret) |
| return ERR_PTR(-EINVAL); |
| |
| for (i = 0; i < res->sets; i++) { |
| resource_subtype = temp[i]; |
| ret = handle->ops.rm_core_ops.get_range(handle, dev_id, |
| resource_subtype, |
| &res->desc[i].start, |
| &res->desc[i].num); |
| if (ret) { |
| dev_dbg(dev, "type %d subtype %d not allocated for host %d\n", |
| dev_id, resource_subtype, |
| handle_to_ti_sci_info(handle)->host_id); |
| res->desc[i].start = 0; |
| res->desc[i].num = 0; |
| continue; |
| } |
| |
| valid_set = true; |
| dev_dbg(dev, "res type = %d, subtype = %d, start = %d, num = %d\n", |
| dev_id, resource_subtype, res->desc[i].start, |
| res->desc[i].num); |
| |
| res->desc[i].res_map = |
| devm_kzalloc(dev, BITS_TO_LONGS(res->desc[i].num) * |
| sizeof(*res->desc[i].res_map), GFP_KERNEL); |
| if (!res->desc[i].res_map) |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| if (valid_set) |
| return res; |
| |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* Description for K2G */ |
| static const struct ti_sci_desc ti_sci_pmmc_k2g_desc = { |
| .default_host_id = 2, |
| /* Conservative duration */ |
| .max_rx_timeout_ms = 10000, |
| /* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */ |
| .max_msgs = 20, |
| .max_msg_size = 64, |
| }; |
| |
| /* Description for AM654 */ |
| static const struct ti_sci_desc ti_sci_pmmc_am654_desc = { |
| .default_host_id = 12, |
| /* Conservative duration */ |
| .max_rx_timeout_ms = 10000, |
| /* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */ |
| .max_msgs = 20, |
| .max_msg_size = 60, |
| }; |
| |
| /* Description for J721e DM to DMSC communication */ |
| static const struct ti_sci_desc ti_sci_dm_j721e_desc = { |
| .default_host_id = 3, |
| .max_rx_timeout_ms = 10000, |
| .max_msgs = 20, |
| .max_msg_size = 60, |
| }; |
| |
| static const struct udevice_id ti_sci_ids[] = { |
| { |
| .compatible = "ti,k2g-sci", |
| .data = (ulong)&ti_sci_pmmc_k2g_desc |
| }, |
| { |
| .compatible = "ti,am654-sci", |
| .data = (ulong)&ti_sci_pmmc_am654_desc |
| }, |
| { /* Sentinel */ }, |
| }; |
| |
| static __maybe_unused const struct udevice_id ti_sci_dm_ids[] = { |
| { |
| .compatible = "ti,j721e-dm-sci", |
| .data = (ulong)&ti_sci_dm_j721e_desc |
| }, |
| { /* Sentinel */ }, |
| }; |
| |
| U_BOOT_DRIVER(ti_sci) = { |
| .name = "ti_sci", |
| .id = UCLASS_FIRMWARE, |
| .of_match = ti_sci_ids, |
| .probe = ti_sci_probe, |
| .priv_auto = sizeof(struct ti_sci_info), |
| }; |
| |
| #if IS_ENABLED(CONFIG_K3_DM_FW) |
| U_BOOT_DRIVER(ti_sci_dm) = { |
| .name = "ti_sci_dm", |
| .id = UCLASS_FIRMWARE, |
| .of_match = ti_sci_dm_ids, |
| .probe = ti_sci_dm_probe, |
| .priv_auto = sizeof(struct ti_sci_info), |
| }; |
| #endif |