| # SPDX-License-Identifier: GPL-2.0+ |
| |
| obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/ |
| obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/ |
| obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/ |
| obj-$(CONFIG_$(SPL_TPL_)DM) += core/ |
| obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/ |
| obj-$(CONFIG_$(SPL_TPL_)GPIO) += gpio/ |
| obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC) += misc/ |
| obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/ |
| obj-$(CONFIG_$(SPL_TPL_)FIRMWARE) +=firmware/ |
| |
| # This is needed for now, until we drop the i2c/ rule in the top-level Makefile |
| ifdef CONFIG_SPL_BUILD |
| obj-$(CONFIG_$(SPL_TPL_)I2C) += i2c/ |
| endif |
| obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/ |
| obj-$(CONFIG_$(SPL_TPL_)LED) += led/ |
| obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/ |
| obj-y += mtd/ |
| obj-$(CONFIG_$(SPL_)MULTIPLEXER) += mux/ |
| obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/ |
| obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/ |
| obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/ |
| obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/ |
| obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/ |
| obj-$(CONFIG_$(SPL_TPL_)RTC_SUPPORT) += rtc/ |
| obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/ |
| obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/ |
| obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/ |
| obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/ |
| obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/ |
| obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/ |
| obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/ |
| obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/ |
| obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += power/acpi_pmc/ |
| obj-$(CONFIG_XEN) += xen/ |
| obj-$(CONFIG_$(SPL_)FPGA) += fpga/ |
| |
| ifndef CONFIG_TPL_BUILD |
| ifdef CONFIG_SPL_BUILD |
| |
| obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/ |
| obj-$(CONFIG_SPL_CACHE_SUPPORT) += cache/ |
| obj-$(CONFIG_SPL_CPU) += cpu/ |
| obj-$(CONFIG_SPL_CRYPTO) += crypto/ |
| obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ |
| obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/ |
| obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/ |
| obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/ |
| obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/ |
| obj-$(CONFIG_SPL_POWER) += power/ power/pmic/ |
| obj-$(CONFIG_SPL_POWER) += power/regulator/ |
| obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/ |
| obj-$(CONFIG_SPL_DM_RESET) += reset/ |
| obj-$(CONFIG_SPL_DMA) += dma/ |
| obj-$(CONFIG_SPL_ETH) += net/ |
| obj-$(CONFIG_SPL_ETH) += net/phy/ |
| obj-$(CONFIG_SPL_USB_ETHER) += net/phy/ |
| obj-$(CONFIG_SPL_MUSB_NEW) += usb/musb-new/ |
| obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/ |
| obj-$(CONFIG_SPL_USB_GADGET) += usb/common/ |
| obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/ |
| obj-$(CONFIG_SPL_WATCHDOG) += watchdog/ |
| obj-$(CONFIG_SPL_USB_HOST) += usb/host/ |
| obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ |
| obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/ |
| obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/ |
| obj-$(CONFIG_SPL_THERMAL) += thermal/ |
| |
| endif |
| endif |
| |
| ifdef CONFIG_TPL_BUILD |
| |
| obj-$(CONFIG_TPL_BOOTCOUNT_LIMIT) += bootcount/ |
| obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ |
| |
| endif |
| |
| ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) |
| |
| obj-y += adc/ |
| obj-y += ata/ |
| obj-y += bus/ |
| obj-$(CONFIG_DM_DEMO) += demo/ |
| obj-$(CONFIG_BIOSEMU) += bios_emulator/ |
| obj-y += block/ |
| obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/ |
| obj-y += cache/ |
| obj-$(CONFIG_CPU) += cpu/ |
| obj-y += crypto/ |
| obj-$(CONFIG_FASTBOOT) += fastboot/ |
| obj-y += misc/ |
| obj-$(CONFIG_MMC) += mmc/ |
| obj-$(CONFIG_NVME) += nvme/ |
| obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/ |
| obj-y += dfu/ |
| obj-$(CONFIG_PCH) += pch/ |
| obj-$(CONFIG_DM_REBOOT_MODE) += reboot-mode/ |
| obj-y += rtc/ |
| obj-y += scsi/ |
| obj-y += sound/ |
| obj-y += spmi/ |
| obj-y += video/ |
| obj-y += watchdog/ |
| obj-$(CONFIG_QE) += qe/ |
| obj-$(CONFIG_U_QE) += qe/ |
| obj-y += mailbox/ |
| obj-y += memory/ |
| obj-y += mtd/ |
| obj-y += pwm/ |
| obj-y += reset/ |
| obj-y += input/ |
| # SOC specific infrastructure drivers. |
| obj-y += smem/ |
| obj-y += thermal/ |
| obj-$(CONFIG_TEE) += tee/ |
| obj-y += axi/ |
| obj-y += ufs/ |
| obj-$(CONFIG_W1) += w1/ |
| obj-$(CONFIG_W1_EEPROM) += w1-eeprom/ |
| |
| obj-$(CONFIG_MACH_PIC32) += ddr/microchip/ |
| obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/ |
| obj-$(CONFIG_DM_RNG) += rng/ |
| endif |
| |
| obj-y += soc/ |