| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| |
| /dts-v1/; |
| |
| #include "k3-j721s2.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| memory@80000000 { |
| device_type = "memory"; |
| /* 16 GB RAM */ |
| reg = <0x00 0x80000000 0x00 0x80000000>, |
| <0x08 0x80000000 0x03 0x80000000>; |
| }; |
| |
| reserved_memory: reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| secure_ddr: optee@9e800000 { |
| reg = <0x00 0x9e800000 0x00 0x01800000>; |
| alignment = <0x1000>; |
| no-map; |
| }; |
| |
| }; |
| |
| transceiver0: can-phy0 { |
| /* standby pin has been grounded by default */ |
| compatible = "ti,tcan1042"; |
| #phy-cells = <0>; |
| max-bitrate = <5000000>; |
| }; |
| }; |
| |
| &main_pmx0 { |
| main_i2c0_pins_default: main-i2c0-pins-default { |
| pinctrl-single,pins = < |
| J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */ |
| J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */ |
| >; |
| }; |
| |
| main_mcan16_pins_default: main-mcan16-pins-default { |
| pinctrl-single,pins = < |
| J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */ |
| J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */ |
| >; |
| }; |
| }; |
| |
| &main_i2c0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c0_pins_default>; |
| clock-frequency = <400000>; |
| |
| exp_som: gpio@21 { |
| compatible = "ti,tca6408"; |
| reg = <0x21>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0", |
| "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1", |
| "GPIO_RGMII1_RST", "GPIO_eDP_ENABLE", |
| "GPIO_LIN_EN", "CAN_STB"; |
| }; |
| }; |
| |
| &main_mcan16 { |
| pinctrl-0 = <&main_mcan16_pins_default>; |
| pinctrl-names = "default"; |
| phys = <&transceiver0>; |
| }; |
| |
| &mailbox0_cluster0 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster1 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster2 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster3 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster4 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster5 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster6 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster7 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster8 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster9 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster10 { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster11 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster0 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster1 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster2 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster3 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster4 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster5 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster6 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster7 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster8 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster9 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster10 { |
| status = "disabled"; |
| }; |
| |
| &mailbox1_cluster11 { |
| status = "disabled"; |
| }; |