blob: e1c9c9080c9e95cd02addd1bc2426b0388a68586 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Device tree file for the Zyxel NSA 310S NAS box.
*
* Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
*
* Based on
* Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
* Based upon the board setup file created by Peter Schildmann
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Zyxel NSA310S";
compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-names = "default";
pmx_sata0: pmx-sata0 {
marvell,pins ;
marvell,function = "sata0";
};
pmx_sata1: pmx-sata1 {
marvell,pins ;
marvell,function = "sata1";
};
pmx_usb_power: pmx-usb-power {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_pwr_off: pmx-pwr-off {
marvell,pins = "mpp27";
marvell,function = "gpio";
};
pmx_btn_reset: pmx-btn-reset {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
pmx_btn_copy: pmx-btn-copy {
marvell,pins = "mpp25";
marvell,function = "gpio";
};
pmx_btn_power: pmx-btn-power {
marvell,pins = "mpp26";
marvell,function = "gpio";
};
pmx_led_hdd2_green: pmx-led-hdd2-green {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
pmx_led_hdd2_red: pmx-led-hdd2-red {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_led_usb_green: pmx-led-usb-green {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
pmx_led_copy_green: pmx-led-copy-green {
marvell,pins = "mpp22";
marvell,function = "gpio";
};
pmx_led_copy_red: pmx-led-copy-red {
marvell,pins = "mpp23";
marvell,function = "gpio";
};
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_led_sys_orange: pmx-led-sys-orange {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_hdd1_green: pmx-led-hdd1-green {
marvell,pins = "mpp16";
marvell,function = "gpio";
};
pmx_led_hdd1_red: pmx-led-hdd1-red {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
pmx_pwr_sata1: pmx-pwr-sata1 {
marvell,pins = "mpp33";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <1>;
};
rtc@10300 {
status = "disabled";
};
i2c@11000 {
status = "okay";
ht1382: rtc@68 {
compatible = "htk,ht1382";
reg = <0x68>;
};
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
usb0_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
};
sata1_power: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA1 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_pwr_off>;
pinctrl-names = "default";
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
pinctrl-names = "default";
button@1 {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
};
button@2 {
label = "Copy Button";
linux,code = <KEY_COPY>;
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
button@3 {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
&pmx_led_usb_green
&pmx_led_sys_green &pmx_led_sys_orange
&pmx_led_copy_green &pmx_led_copy_red
&pmx_led_hdd1_green &pmx_led_hdd1_red>;
pinctrl-names = "default";
green-sys {
label = "nsa310s:green:sys";
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
orange-sys {
label = "nsa310s:orange:sys";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
green-hdd1 {
label = "nsa310s:green:hdd1";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
red-hdd1 {
label = "nsa310s:red:hdd1";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
green-hdd2 {
label = "nsa310s:green:hdd2";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
red-hdd2 {
label = "nsa310s:red:hdd2";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
green-usb {
label = "nsa310s:green:usb";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
green-copy {
label = "nsa310s:green:copy";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "ide-disk";
};
red-copy {
label = "nsa310s:red:copy";
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
};
};
};
&nand {
status = "okay";
chip-delay = <35>;
partition@0 {
label = "uboot";
reg = <0x0000000 0x0100000>;
};
partition@100000 {
label = "stock_uboot_env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "key_store";
reg = <0x0180000 0x0080000>;
};
partition@200000 {
label = "info";
reg = <0x0200000 0x0080000>;
};
partition@280000 {
label = "etc";
reg = <0x0280000 0x0a00000>;
};
partition@c80000 {
label = "kernel_1";
reg = <0x0c80000 0x0a00000>;
};
partition@1680000 {
label = "rootfs1";
reg = <0x1680000 0x2fc0000>;
};
partition@4640000 {
label = "kernel_2";
reg = <0x4640000 0x0a00000>;
};
partition@5040000 {
label = "rootfs2";
reg = <0x5040000 0x2fc0000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@1 {
compatible = "marvell,88e1510";
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&pciec {
status = "okay";
};
&pcie0 {
status = "okay";
};