| |
| if SOC_MT7628 |
| |
| choice |
| prompt "Board select" |
| |
| config BOARD_GARDENA_SMART_GATEWAY_MT7688 |
| bool "GARDENA smart Gateway" |
| select BOARD_LATE_INIT |
| help |
| GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM |
| and 8 MiB of flash (SPI NOR) and additional SPI NAND storage. |
| |
| config BOARD_LINKIT_SMART_7688 |
| bool "LinkIt Smart 7688" |
| help |
| Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM |
| and 32 MiB of flash (SPI). |
| Between its different peripherals there's an integrated switch with 4 |
| ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and |
| a MT7688 (PCIe). |
| |
| config BOARD_MT7628_RFB |
| bool "MediaTek MT7628 RFB" |
| help |
| The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB |
| SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host, |
| 1 SDXC, 1 PCIe socket and JTAG pins. |
| |
| config BOARD_VOCORE2 |
| bool "VoCore2" |
| select SPL_SERIAL |
| select SPL_UART2_SPIS_PINMUX |
| help |
| VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM |
| and 16 MiB of flash (SPI). |
| |
| endchoice |
| |
| config SPL_UART2_SPIS_PINMUX |
| bool "Use alternative pinmux for UART2 in SPL stage" |
| depends on SPL_SERIAL |
| help |
| Select this if the UART2 of your board is connected to GPIO 16/17 |
| (shared with SPIS) rather than the usual GPIO 20/21. |
| |
| config SYS_BOARD |
| string "Board name" |
| default "mt7628" if BOARD_MT7628_RFB |
| |
| config SYS_CONFIG_NAME |
| string "Board configuration name" |
| default "mt7628" if BOARD_MT7628_RFB |
| |
| source "board/gardena/smart-gateway-mt7688/Kconfig" |
| source "board/seeed/linkit-smart-7688/Kconfig" |
| source "board/vocore/vocore2/Kconfig" |
| |
| endif |