| .. SPDX-License-Identifier: GPL-2.0+ |
| .. sectionauthor:: Simon Glass <sjg@chromium.org> |
| |
| Chromebook Samus |
| ================ |
| |
| First, you need the following binary blobs: |
| |
| * descriptor.bin - Intel flash descriptor |
| * me.bin - Intel Management Engine |
| * mrc.bin - Memory Reference Code, which sets up SDRAM |
| * refcode.elf - Additional Reference code |
| * vga.bin - video ROM, which sets up the display |
| |
| If you have a samus you can obtain them from your flash, for example, in |
| developer mode on the Chromebook (use Ctrl-Alt-F2 to obtain a terminal and |
| log in as 'root'):: |
| |
| cd /tmp |
| flashrom -w samus.bin |
| scp samus.bin username@ip_address:/path/to/somewhere |
| |
| If not see the coreboot tree where you can use:: |
| |
| bash crosfirmware.sh samus |
| |
| to get the image. There is also an 'extract_blobs.sh' scripts that you can use |
| on the 'coreboot-Google_Samus.*' file to short-circuit some of the below. |
| |
| Then 'ifdtool -x samus.bin' on your development machine will produce:: |
| |
| flashregion_0_flashdescriptor.bin |
| flashregion_1_bios.bin |
| flashregion_2_intel_me.bin |
| |
| Rename flashregion_0_flashdescriptor.bin to descriptor.bin |
| Rename flashregion_2_intel_me.bin to me.bin |
| You can ignore flashregion_1_bios.bin - it is not used. |
| |
| To get the rest, use 'cbfstool samus.bin print':: |
| |
| samus.bin: 8192 kB, bootblocksize 2864, romsize 8388608, offset 0x700000 |
| alignment: 64 bytes, architecture: x86 |
| |
| ============================ ======== =========== ====== |
| Name Offset Type Size |
| ============================ ======== =========== ====== |
| cmos_layout.bin 0x700000 cmos_layout 1164 |
| pci8086,0406.rom 0x7004c0 optionrom 65536 |
| spd.bin 0x710500 (unknown) 4096 |
| cpu_microcode_blob.bin 0x711540 microcode 70720 |
| fallback/romstage 0x722a00 stage 54210 |
| fallback/ramstage 0x72fe00 stage 96382 |
| config 0x7476c0 raw 6075 |
| fallback/vboot 0x748ec0 stage 15980 |
| fallback/refcode 0x74cd80 stage 75578 |
| fallback/payload 0x75f500 payload 62878 |
| u-boot.dtb 0x76eb00 (unknown) 5318 |
| (empty) 0x770000 null 196504 |
| mrc.bin 0x79ffc0 (unknown) 222876 |
| (empty) 0x7d66c0 null 167320 |
| ============================ ======== =========== ====== |
| |
| You can extract what you need:: |
| |
| cbfstool samus.bin extract -n pci8086,0406.rom -f vga.bin |
| cbfstool samus.bin extract -n fallback/refcode -f refcode.rmod |
| cbfstool samus.bin extract -n mrc.bin -f mrc.bin |
| cbfstool samus.bin extract -n fallback/refcode -f refcode.bin -U |
| |
| Note that the -U flag is only supported by the latest cbfstool. It unpacks |
| and decompresses the stage to produce a coreboot rmodule. This is a simple |
| representation of an ELF file. You need the patch "Support decoding a stage |
| with compression". |
| |
| Put all 5 files into board/google/chromebook_samus. |
| |
| Now you can build U-Boot and obtain u-boot.rom:: |
| |
| $ make chromebook_samus_defconfig |
| $ make all |
| |
| If you are using em100, then this command will flash write -Boot:: |
| |
| em100 -s -d filename.rom -c W25Q64CV -r |
| |
| Flash map for samus / broadwell: |
| |
| :fffff800: SYS_X86_START16 |
| :ffff0000: RESET_SEG_START |
| :fffd8000: TPL_TEXT_BASE |
| :fffa0000: X86_MRC_ADDR |
| :fff90000: VGA_BIOS_ADDR |
| :ffed0000: TEXT_BASE |
| :ffea0000: X86_REFCODE_ADDR |
| :ffe70000: SPL_TEXT_BASE |
| :ffbf8000: CONFIG_ENV_OFFSET (environemnt offset) |
| :ffbe0000: rw-mrc-cache (Memory-reference-code cache) |
| :ffa00000: <spare> |
| :ff801000: intel-me (address set by descriptor.bin) |
| :ff800000: intel-descriptor |