| .. SPDX-License-Identifier: GPL-2.0+ |
| .. sectionauthor:: Simon Glass <sjg@chromium.org> |
| |
| Minnowboard MAX |
| =============== |
| |
| This uses as FSP as with Crown Bay, except it is for the Atom E3800 series. |
| Download this and get the .fd file (BAYTRAIL_FSP_GOLD_003_16-SEP-2014.fd at |
| the time of writing). Put it in the corresponding board directory and rename |
| it to fsp.bin. |
| |
| Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same |
| board directory as vga.bin. |
| |
| You still need two more binary blobs. For Minnowboard MAX, we can reuse the |
| same ME firmware above, but for flash descriptor, we need get that somewhere |
| else, as the one above does not seem to work, probably because it is not |
| designed for the Minnowboard MAX. Now download the original firmware image |
| for this board from: |
| |
| * http://firmware.intel.com/sites/default/files/2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip |
| |
| Unzip it:: |
| |
| $ unzip 2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip |
| |
| Use ifdtool in the U-Boot tools directory to extract the images from that |
| file, for example:: |
| |
| $ ./tools/ifdtool -x MNW2MAX1.X64.0073.R02.1409160934.bin |
| |
| This will provide the descriptor file - copy this into the correct place:: |
| |
| $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin |
| |
| Now you can build U-Boot and obtain u-boot.rom:: |
| |
| $ make minnowmax_defconfig |
| $ make all |
| |
| Checksums are as follows (but note that newer versions will invalidate this):: |
| |
| $ md5sum -b board/intel/minnowmax/*.bin |
| ffda9a3b94df5b74323afb328d51e6b4 board/intel/minnowmax/descriptor.bin |
| 69f65b9a580246291d20d08cbef9d7c5 board/intel/minnowmax/fsp.bin |
| 894a97d371544ec21de9c3e8e1716c4b board/intel/minnowmax/me.bin |
| a2588537da387da592a27219d56e9962 board/intel/minnowmax/vga.bin |
| |
| The ROM image is broken up into these parts: |
| |
| ====== ================== ============================ |
| Offset Description Controlling config |
| ====== ================== ============================ |
| 000000 descriptor.bin Hard-coded to 0 in ifdtool |
| 001000 me.bin Set by the descriptor |
| 500000 <spare> |
| 6ef000 Environment CONFIG_ENV_OFFSET |
| 6f0000 MRC cache CONFIG_ENABLE_MRC_CACHE |
| 700000 u-boot-dtb.bin CONFIG_TEXT_BASE |
| 7b0000 vga.bin CONFIG_VGA_BIOS_ADDR |
| 7c0000 fsp.bin CONFIG_FSP_ADDR |
| 7f8000 <spare> (depends on size of fsp.bin) |
| 7ff800 U-Boot 16-bit boot CONFIG_SYS_X86_START16 |
| ====== ================== ============================ |
| |
| Overall ROM image size is controlled by CONFIG_ROM_SIZE. |
| |
| Note that the debug version of the FSP is bigger in size. If this version |
| is used, CONFIG_FSP_ADDR needs to be configured to 0xfffb0000 instead of |
| the default value 0xfffc0000. |