| // SPDX-License-Identifier: GPL-2.0+ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <fsl_ddr_sdram.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define DCFG_GPPORCR1 0x20 |
| |
| #define GPPORCR1_MEM_MASK (0x7 << 5) |
| #define GPPORCR1_MEM_512MB_CS0 (0x0 << 5) |
| #define GPPORCR1_MEM_1GB_CS0 (0x1 << 5) |
| #define GPPORCR1_MEM_2GB_CS0 (0x2 << 5) |
| #define GPPORCR1_MEM_4GB_CS0_1 (0x3 << 5) |
| #define GPPORCR1_MEM_4GB_CS0_2 (0x4 << 5) |
| #define GPPORCR1_MEM_8GB_CS0_1_2_3 (0x5 << 5) |
| #define GPPORCR1_MEM_8GB_CS0_1 (0x6 << 5) |
| |
| static fsl_ddr_cfg_regs_t __maybe_unused ddr_cfg_regs = { |
| .cs[0].bnds = 0x0000007f, |
| .cs[0].config = 0x80044402, |
| .cs[1].bnds = 0x008000ff, |
| .cs[1].config = 0x80004402, |
| |
| .timing_cfg_0 = 0x9011010c, |
| .timing_cfg_3 = 0x010c1000, |
| .timing_cfg_1 = 0xbcb48c66, |
| .timing_cfg_2 = 0x0fc0d118, |
| .ddr_sdram_cfg = 0xe70c000c, |
| .ddr_sdram_cfg_2 = 0x24401111, |
| .ddr_sdram_mode = 0x00441c70, |
| .ddr_sdram_mode_3 = 0x00001c70, |
| .ddr_sdram_mode_5 = 0x00001c70, |
| .ddr_sdram_mode_7 = 0x00001c70, |
| .ddr_sdram_mode_2 = 0x00180000, |
| .ddr_sdram_mode_4 = 0x00180000, |
| .ddr_sdram_mode_6 = 0x00180000, |
| .ddr_sdram_mode_8 = 0x00180000, |
| |
| .ddr_sdram_interval = 0x0c30030c, |
| .ddr_data_init = 0xdeadbeef, |
| |
| .ddr_sdram_clk_cntl = 0x02400000, |
| |
| .timing_cfg_4 = 0x00000001, |
| .timing_cfg_5 = 0x04401400, |
| |
| .ddr_zq_cntl = 0x89080600, |
| .ddr_wrlvl_cntl = 0x8675f606, |
| .ddr_wrlvl_cntl_2 = 0x04080700, |
| .ddr_wrlvl_cntl_3 = 0x00000009, |
| |
| .ddr_cdr1 = 0x80040000, |
| .ddr_cdr2 = 0x0000bc01, |
| }; |
| |
| int fsl_initdram(void) |
| { |
| u32 gpporcr1 = in_le32(DCFG_BASE + DCFG_GPPORCR1); |
| phys_size_t dram_size; |
| |
| switch (gpporcr1 & GPPORCR1_MEM_MASK) { |
| case GPPORCR1_MEM_2GB_CS0: |
| dram_size = 0x80000000; |
| ddr_cfg_regs.cs[1].bnds = 0; |
| ddr_cfg_regs.cs[1].config = 0; |
| ddr_cfg_regs.cs[1].config_2 = 0; |
| break; |
| case GPPORCR1_MEM_4GB_CS0_1: |
| dram_size = 0x100000000ULL; |
| break; |
| case GPPORCR1_MEM_512MB_CS0: |
| dram_size = 0x20000000; |
| fallthrough; /* for now */ |
| case GPPORCR1_MEM_1GB_CS0: |
| dram_size = 0x40000000; |
| fallthrough; /* for now */ |
| case GPPORCR1_MEM_4GB_CS0_2: |
| dram_size = 0x100000000ULL; |
| fallthrough; /* for now */ |
| case GPPORCR1_MEM_8GB_CS0_1: |
| case GPPORCR1_MEM_8GB_CS0_1_2_3: |
| dram_size = 0x200000000ULL; |
| fallthrough; /* for now */ |
| default: |
| panic("Unsupported memory configuration (%08x)\n", |
| gpporcr1 & GPPORCR1_MEM_MASK); |
| break; |
| } |
| |
| if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) |
| fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); |
| |
| gd->ram_size = dram_size; |
| |
| return 0; |
| } |