| /* |
| * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <asm/errno.h> |
| #include <linux/types.h> |
| #include <fsl_pmic.h> |
| |
| static int check_param(u32 reg, u32 write) |
| { |
| if (reg > 63 || write > 1) { |
| printf("<reg num> = %d is invalid. Should be less then 63\n", |
| reg); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_FSL_PMIC_I2C |
| #include <i2c.h> |
| |
| u32 pmic_reg(u32 reg, u32 val, u32 write) |
| { |
| unsigned char buf[4] = { 0 }; |
| u32 ret_val = 0; |
| |
| if (check_param(reg, write)) |
| return -1; |
| |
| if (write) { |
| buf[0] = (val >> 16) & 0xff; |
| buf[1] = (val >> 8) & 0xff; |
| buf[2] = (val) & 0xff; |
| if (i2c_write(CONFIG_SYS_FSL_PMIC_I2C_ADDR, reg, 1, buf, 3)) |
| return -1; |
| } else { |
| if (i2c_read(CONFIG_SYS_FSL_PMIC_I2C_ADDR, reg, 1, buf, 3)) |
| return -1; |
| ret_val = buf[0] << 16 | buf[1] << 8 | buf[2]; |
| } |
| |
| return ret_val; |
| } |
| #else /* SPI interface */ |
| #include <spi.h> |
| static struct spi_slave *slave; |
| |
| struct spi_slave *pmic_spi_probe(void) |
| { |
| return spi_setup_slave(CONFIG_FSL_PMIC_BUS, |
| CONFIG_FSL_PMIC_CS, |
| CONFIG_FSL_PMIC_CLK, |
| CONFIG_FSL_PMIC_MODE); |
| } |
| |
| void pmic_spi_free(struct spi_slave *slave) |
| { |
| if (slave) |
| spi_free_slave(slave); |
| } |
| |
| u32 pmic_reg(u32 reg, u32 val, u32 write) |
| { |
| u32 pmic_tx, pmic_rx; |
| u32 tmp; |
| |
| if (!slave) { |
| slave = pmic_spi_probe(); |
| |
| if (!slave) |
| return -1; |
| } |
| |
| if (check_param(reg, write)) |
| return -1; |
| |
| if (spi_claim_bus(slave)) |
| return -1; |
| |
| pmic_tx = (write << 31) | (reg << 25) | (val & 0x00FFFFFF); |
| |
| tmp = cpu_to_be32(pmic_tx); |
| |
| if (spi_xfer(slave, 4 << 3, &tmp, &pmic_rx, |
| SPI_XFER_BEGIN | SPI_XFER_END)) { |
| spi_release_bus(slave); |
| return -1; |
| } |
| |
| if (write) { |
| pmic_tx &= ~(1 << 31); |
| tmp = cpu_to_be32(pmic_tx); |
| if (spi_xfer(slave, 4 << 3, &tmp, &pmic_rx, |
| SPI_XFER_BEGIN | SPI_XFER_END)) { |
| spi_release_bus(slave); |
| return -1; |
| } |
| } |
| |
| spi_release_bus(slave); |
| return cpu_to_be32(pmic_rx); |
| } |
| #endif |
| |
| void pmic_reg_write(u32 reg, u32 value) |
| { |
| pmic_reg(reg, value, 1); |
| } |
| |
| u32 pmic_reg_read(u32 reg) |
| { |
| return pmic_reg(reg, 0, 0); |
| } |
| |
| void pmic_show_pmic_info(void) |
| { |
| u32 rev_id; |
| |
| rev_id = pmic_reg_read(REG_IDENTIFICATION); |
| printf("PMIC ID: 0x%08x [Rev: ", rev_id); |
| switch (rev_id & 0x1F) { |
| case 0x1: |
| puts("1.0"); |
| break; |
| case 0x9: |
| puts("1.1"); |
| break; |
| case 0xA: |
| puts("1.2"); |
| break; |
| case 0x10: |
| puts("2.0"); |
| break; |
| case 0x11: |
| puts("2.1"); |
| break; |
| case 0x18: |
| puts("3.0"); |
| break; |
| case 0x19: |
| puts("3.1"); |
| break; |
| case 0x1A: |
| puts("3.2"); |
| break; |
| case 0x2: |
| puts("3.2A"); |
| break; |
| case 0x1B: |
| puts("3.3"); |
| break; |
| case 0x1D: |
| puts("3.5"); |
| break; |
| default: |
| puts("unknown"); |
| break; |
| } |
| puts("]\n"); |
| } |
| |
| static void pmic_dump(int numregs) |
| { |
| u32 val; |
| int i; |
| |
| pmic_show_pmic_info(); |
| for (i = 0; i < numregs; i++) { |
| val = pmic_reg_read(i); |
| if (!(i % 8)) |
| printf ("\n0x%02x: ", i); |
| printf("%08x ", val); |
| } |
| puts("\n"); |
| } |
| |
| int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| char *cmd; |
| int nregs; |
| u32 val; |
| |
| /* at least two arguments please */ |
| if (argc < 2) |
| return cmd_usage(cmdtp); |
| |
| cmd = argv[1]; |
| if (strcmp(cmd, "dump") == 0) { |
| if (argc < 3) |
| return cmd_usage(cmdtp); |
| |
| nregs = simple_strtoul(argv[2], NULL, 16); |
| pmic_dump(nregs); |
| return 0; |
| } |
| if (strcmp(cmd, "write") == 0) { |
| if (argc < 4) |
| return cmd_usage(cmdtp); |
| |
| nregs = simple_strtoul(argv[2], NULL, 16); |
| val = simple_strtoul(argv[3], NULL, 16); |
| pmic_reg_write(nregs, val); |
| return 0; |
| } |
| /* No subcommand found */ |
| return 1; |
| } |
| |
| U_BOOT_CMD( |
| pmic, CONFIG_SYS_MAXARGS, 1, do_pmic, |
| "Freescale PMIC (Atlas)", |
| "dump [numregs] - dump registers\n" |
| "pmic write <reg> <value> - write register" |
| ); |