| /* |
| * (C) Copyright 2000-2009 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __COMMON_H_ |
| #define __COMMON_H_ 1 |
| |
| #undef _LINUX_CONFIG_H |
| #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ |
| |
| #ifndef __ASSEMBLY__ /* put C only stuff in this section */ |
| |
| typedef unsigned char uchar; |
| typedef volatile unsigned long vu_long; |
| typedef volatile unsigned short vu_short; |
| typedef volatile unsigned char vu_char; |
| |
| #include <config.h> |
| #include <asm-offsets.h> |
| #include <linux/bitops.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/stringify.h> |
| #include <asm/ptrace.h> |
| #include <stdarg.h> |
| #if defined(CONFIG_PCI) && defined(CONFIG_4xx) |
| #include <pci.h> |
| #endif |
| #if defined(CONFIG_8xx) |
| #include <asm/8xx_immap.h> |
| #if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \ |
| defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \ |
| defined(CONFIG_MPC859DSL) || \ |
| defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \ |
| defined(CONFIG_MPC866P) |
| # define CONFIG_MPC866_FAMILY 1 |
| #elif defined(CONFIG_MPC870) \ |
| || defined(CONFIG_MPC875) \ |
| || defined(CONFIG_MPC880) \ |
| || defined(CONFIG_MPC885) |
| # define CONFIG_MPC885_FAMILY 1 |
| #endif |
| #if defined(CONFIG_MPC860) \ |
| || defined(CONFIG_MPC860T) \ |
| || defined(CONFIG_MPC866_FAMILY) \ |
| || defined(CONFIG_MPC885_FAMILY) |
| # define CONFIG_MPC86x 1 |
| #endif |
| #elif defined(CONFIG_5xx) |
| #include <asm/5xx_immap.h> |
| #elif defined(CONFIG_MPC5xxx) |
| #include <mpc5xxx.h> |
| #elif defined(CONFIG_MPC512X) |
| #include <asm/immap_512x.h> |
| #elif defined(CONFIG_8260) |
| #if defined(CONFIG_MPC8247) \ |
| || defined(CONFIG_MPC8248) \ |
| || defined(CONFIG_MPC8271) \ |
| || defined(CONFIG_MPC8272) |
| #define CONFIG_MPC8272_FAMILY 1 |
| #endif |
| #if defined(CONFIG_MPC8272_FAMILY) |
| #define CONFIG_MPC8260 1 |
| #endif |
| #include <asm/immap_8260.h> |
| #endif |
| #ifdef CONFIG_MPC86xx |
| #include <mpc86xx.h> |
| #include <asm/immap_86xx.h> |
| #endif |
| #ifdef CONFIG_MPC85xx |
| #include <mpc85xx.h> |
| #include <asm/immap_85xx.h> |
| #endif |
| #ifdef CONFIG_MPC83xx |
| #include <mpc83xx.h> |
| #include <asm/immap_83xx.h> |
| #endif |
| #ifdef CONFIG_4xx |
| #include <asm/ppc4xx.h> |
| #endif |
| #ifdef CONFIG_HYMOD |
| #include <board/hymod/hymod.h> |
| #endif |
| #ifdef CONFIG_ARM |
| #define asmlinkage /* nothing */ |
| #endif |
| #ifdef CONFIG_BLACKFIN |
| #include <asm/blackfin.h> |
| #endif |
| #ifdef CONFIG_SOC_DA8XX |
| #include <asm/arch/hardware.h> |
| #endif |
| |
| #include <part.h> |
| #include <flash.h> |
| #include <image.h> |
| |
| #ifdef DEBUG |
| #define _DEBUG 1 |
| #else |
| #define _DEBUG 0 |
| #endif |
| |
| /* |
| * Output a debug text when condition "cond" is met. The "cond" should be |
| * computed by a preprocessor in the best case, allowing for the best |
| * optimization. |
| */ |
| #define debug_cond(cond, fmt, args...) \ |
| do { \ |
| if (cond) \ |
| printf(fmt, ##args); \ |
| } while (0) |
| |
| #define debug(fmt, args...) \ |
| debug_cond(_DEBUG, fmt, ##args) |
| |
| /* |
| * An assertion is run-time check done in debug mode only. If DEBUG is not |
| * defined then it is skipped. If DEBUG is defined and the assertion fails, |
| * then it calls panic*( which may or may not reset/halt U-Boot (see |
| * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found |
| * before release, and after release it is hoped that they don't matter. But |
| * in any case these failing assertions cannot be fixed with a reset (which |
| * may just do the same assertion again). |
| */ |
| void __assert_fail(const char *assertion, const char *file, unsigned line, |
| const char *function); |
| #define assert(x) \ |
| ({ if (!(x) && _DEBUG) \ |
| __assert_fail(#x, __FILE__, __LINE__, __func__); }) |
| |
| #define error(fmt, args...) do { \ |
| printf("ERROR: " fmt "\nat %s:%d/%s()\n", \ |
| ##args, __FILE__, __LINE__, __func__); \ |
| } while (0) |
| |
| #ifndef BUG |
| #define BUG() do { \ |
| printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \ |
| panic("BUG!"); \ |
| } while (0) |
| #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) |
| #endif /* BUG */ |
| |
| /* Force a compilation error if condition is true */ |
| #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) |
| |
| typedef void (interrupt_handler_t)(void *); |
| |
| #include <asm/u-boot.h> /* boot information for Linux kernel */ |
| #include <asm/global_data.h> /* global data used for startup functions */ |
| |
| /* |
| * enable common handling for all TQM8xxL/M boards: |
| * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards |
| * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards |
| * and for the TQM885D board |
| */ |
| #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ |
| defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ |
| defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) |
| # ifndef CONFIG_TQM8xxM |
| # define CONFIG_TQM8xxM |
| # endif |
| #endif |
| #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \ |
| defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \ |
| defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \ |
| defined(CONFIG_TQM885D) |
| # ifndef CONFIG_TQM8xxL |
| # define CONFIG_TQM8xxL |
| # endif |
| #endif |
| |
| /* |
| * General Purpose Utilities |
| */ |
| #define min(X, Y) \ |
| ({ typeof(X) __x = (X); \ |
| typeof(Y) __y = (Y); \ |
| (__x < __y) ? __x : __y; }) |
| |
| #define max(X, Y) \ |
| ({ typeof(X) __x = (X); \ |
| typeof(Y) __y = (Y); \ |
| (__x > __y) ? __x : __y; }) |
| |
| #define MIN(x, y) min(x, y) |
| #define MAX(x, y) max(x, y) |
| |
| #define min3(X, Y, Z) \ |
| ({ typeof(X) __x = (X); \ |
| typeof(Y) __y = (Y); \ |
| typeof(Z) __z = (Z); \ |
| __x < __y ? (__x < __z ? __x : __z) : \ |
| (__y < __z ? __y : __z); }) |
| |
| #define max3(X, Y, Z) \ |
| ({ typeof(X) __x = (X); \ |
| typeof(Y) __y = (Y); \ |
| typeof(Z) __z = (Z); \ |
| __x > __y ? (__x > __z ? __x : __z) : \ |
| (__y > __z ? __y : __z); }) |
| |
| #define MIN3(x, y, z) min3(x, y, z) |
| #define MAX3(x, y, z) max3(x, y, z) |
| |
| /* |
| * Return the absolute value of a number. |
| * |
| * This handles unsigned and signed longs, ints, shorts and chars. For all |
| * input types abs() returns a signed long. |
| * |
| * For 64-bit types, use abs64() |
| */ |
| #define abs(x) ({ \ |
| long ret; \ |
| if (sizeof(x) == sizeof(long)) { \ |
| long __x = (x); \ |
| ret = (__x < 0) ? -__x : __x; \ |
| } else { \ |
| int __x = (x); \ |
| ret = (__x < 0) ? -__x : __x; \ |
| } \ |
| ret; \ |
| }) |
| |
| #define abs64(x) ({ \ |
| s64 __x = (x); \ |
| (__x < 0) ? -__x : __x; \ |
| }) |
| |
| #if defined(CONFIG_ENV_IS_EMBEDDED) |
| #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN |
| #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ |
| (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ |
| defined(CONFIG_ENV_IS_IN_NVRAM) |
| #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) |
| #else |
| #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN |
| #endif |
| |
| /** |
| * container_of - cast a member of a structure out to the containing structure |
| * @ptr: the pointer to the member. |
| * @type: the type of the container struct this is embedded in. |
| * @member: the name of the member within the struct. |
| * |
| */ |
| #define container_of(ptr, type, member) ({ \ |
| const typeof( ((type *)0)->member ) *__mptr = (ptr); \ |
| (type *)( (char *)__mptr - offsetof(type,member) );}) |
| |
| /* |
| * Function Prototypes |
| */ |
| |
| void hang (void) __attribute__ ((noreturn)); |
| |
| int timer_init(void); |
| int cpu_init(void); |
| |
| /* */ |
| phys_size_t initdram (int); |
| int display_options (void); |
| void print_size(unsigned long long, const char *); |
| int print_buffer(ulong addr, const void *data, uint width, uint count, |
| uint linelen); |
| |
| /* common/main.c */ |
| void main_loop (void); |
| int run_command(const char *cmd, int flag); |
| |
| /** |
| * Run a list of commands separated by ; or even \0 |
| * |
| * Note that if 'len' is not -1, then the command does not need to be nul |
| * terminated, Memory will be allocated for the command in that case. |
| * |
| * @param cmd List of commands to run, each separated bu semicolon |
| * @param len Length of commands excluding terminator if known (-1 if not) |
| * @param flag Execution flags (CMD_FLAG_...) |
| * @return 0 on success, or != 0 on error. |
| */ |
| int run_command_list(const char *cmd, int len, int flag); |
| int readline (const char *const prompt); |
| int readline_into_buffer(const char *const prompt, char *buffer, |
| int timeout); |
| int parse_line (char *, char *[]); |
| void init_cmd_timeout(void); |
| void reset_cmd_timeout(void); |
| extern char console_buffer[]; |
| |
| /* arch/$(ARCH)/lib/board.c */ |
| void board_init_f(ulong); |
| void board_init_r (gd_t *, ulong) __attribute__ ((noreturn)); |
| int checkboard (void); |
| int checkflash (void); |
| int checkdram (void); |
| int last_stage_init(void); |
| extern ulong monitor_flash_len; |
| int mac_read_from_eeprom(void); |
| extern u8 _binary_dt_dtb_start[]; /* embedded device tree blob */ |
| int set_cpu_clk_info(void); |
| int print_cpuinfo(void); |
| int update_flash_size(int flash_size); |
| |
| /** |
| * Show the DRAM size in a board-specific way |
| * |
| * This is used by boards to display DRAM information in their own way. |
| * |
| * @param size Size of DRAM (which should be displayed along with other info) |
| */ |
| void board_show_dram(ulong size); |
| |
| /** |
| * arch_fixup_memory_node() - Write arch-specific memory information to fdt |
| * |
| * Defined in arch/$(ARCH)/lib/bootm.c |
| * |
| * @blob: FDT blob to write to |
| * @return 0 if ok, or -ve FDT_ERR_... on failure |
| */ |
| int arch_fixup_memory_node(void *blob); |
| |
| /* common/flash.c */ |
| void flash_perror (int); |
| |
| /* common/cmd_source.c */ |
| int source (ulong addr, const char *fit_uname); |
| |
| extern ulong load_addr; /* Default Load Address */ |
| extern ulong save_addr; /* Default Save Address */ |
| extern ulong save_size; /* Default Save Size */ |
| |
| /* common/cmd_doc.c */ |
| void doc_probe(unsigned long physadr); |
| |
| /* common/cmd_net.c */ |
| int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); |
| |
| /* common/cmd_fat.c */ |
| int do_fat_fsload(cmd_tbl_t *, int, int, char * const []); |
| |
| /* common/cmd_ext2.c */ |
| int do_ext2load(cmd_tbl_t *, int, int, char * const []); |
| |
| /* common/cmd_nvedit.c */ |
| int env_init (void); |
| void env_relocate (void); |
| int envmatch (uchar *, int); |
| char *getenv (const char *); |
| int getenv_f (const char *name, char *buf, unsigned len); |
| ulong getenv_ulong(const char *name, int base, ulong default_val); |
| |
| /** |
| * getenv_hex() - Return an environment variable as a hex value |
| * |
| * Decode an environment as a hex number (it may or may not have a 0x |
| * prefix). If the environment variable cannot be found, or does not start |
| * with hex digits, the default value is returned. |
| * |
| * @varname: Variable to decode |
| * @default_val: Value to return on error |
| */ |
| ulong getenv_hex(const char *varname, ulong default_val); |
| |
| /* |
| * Read an environment variable as a boolean |
| * Return -1 if variable does not exist (default to true) |
| */ |
| int getenv_yesno(const char *var); |
| int saveenv (void); |
| int setenv (const char *, const char *); |
| int setenv_ulong(const char *varname, ulong value); |
| int setenv_hex(const char *varname, ulong value); |
| /** |
| * setenv_addr - Set an environment variable to an address in hex |
| * |
| * @varname: Environmet variable to set |
| * @addr: Value to set it to |
| * @return 0 if ok, 1 on error |
| */ |
| static inline int setenv_addr(const char *varname, const void *addr) |
| { |
| return setenv_hex(varname, (ulong)addr); |
| } |
| |
| #ifdef CONFIG_ARM |
| # include <asm/mach-types.h> |
| # include <asm/setup.h> |
| # include <asm/u-boot-arm.h> /* ARM version to be fixed! */ |
| #endif /* CONFIG_ARM */ |
| #ifdef CONFIG_X86 /* x86 version to be fixed! */ |
| # include <asm/u-boot-x86.h> |
| #endif /* CONFIG_X86 */ |
| #ifdef CONFIG_SANDBOX |
| # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */ |
| #endif |
| #ifdef CONFIG_NDS32 |
| # include <asm/mach-types.h> |
| # include <asm/setup.h> |
| # include <asm/u-boot-nds32.h> |
| #endif /* CONFIG_NDS32 */ |
| #ifdef CONFIG_MIPS |
| # include <asm/u-boot-mips.h> |
| #endif /* CONFIG_MIPS */ |
| |
| #ifdef CONFIG_AUTO_COMPLETE |
| int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); |
| #endif |
| int get_env_id (void); |
| |
| void pci_init (void); |
| void pci_init_board(void); |
| void pciinfo (int, int); |
| |
| #if defined(CONFIG_PCI) && defined(CONFIG_4xx) |
| int pci_pre_init (struct pci_controller *); |
| int is_pci_host (struct pci_controller *); |
| #endif |
| |
| #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX)) |
| # if defined(CONFIG_SYS_PCI_TARGET_INIT) |
| void pci_target_init (struct pci_controller *); |
| # endif |
| # if defined(CONFIG_SYS_PCI_MASTER_INIT) |
| void pci_master_init (struct pci_controller *); |
| # endif |
| #if defined(CONFIG_440SPE) || \ |
| defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ |
| defined(CONFIG_405EX) |
| void pcie_setup_hoses(int busno); |
| #endif |
| #endif |
| |
| int misc_init_f (void); |
| int misc_init_r (void); |
| |
| /* common/exports.c */ |
| void jumptable_init(void); |
| |
| /* common/kallsysm.c */ |
| const char *symbol_lookup(unsigned long addr, unsigned long *caddr); |
| |
| /* api/api.c */ |
| void api_init (void); |
| |
| /* common/memsize.c */ |
| long get_ram_size (long *, long); |
| |
| /* $(BOARD)/$(BOARD).c */ |
| void reset_phy (void); |
| void fdc_hw_init (void); |
| |
| /* $(BOARD)/eeprom.c */ |
| void eeprom_init (void); |
| #ifndef CONFIG_SPI |
| int eeprom_probe (unsigned dev_addr, unsigned offset); |
| #endif |
| int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); |
| int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); |
| #ifdef CONFIG_LWMON |
| extern uchar pic_read (uchar reg); |
| extern void pic_write (uchar reg, uchar val); |
| #endif |
| |
| /* |
| * Set this up regardless of board |
| * type, to prevent errors. |
| */ |
| #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) |
| # define CONFIG_SYS_DEF_EEPROM_ADDR 0 |
| #else |
| #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) |
| # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR |
| #endif |
| #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */ |
| |
| #if defined(CONFIG_SPI) |
| extern void spi_init_f (void); |
| extern void spi_init_r (void); |
| extern ssize_t spi_read (uchar *, int, uchar *, int); |
| extern ssize_t spi_write (uchar *, int, uchar *, int); |
| #endif |
| |
| #ifdef CONFIG_RPXCLASSIC |
| void rpxclassic_init (void); |
| #endif |
| |
| void rpxlite_init (void); |
| |
| #ifdef CONFIG_MBX |
| /* $(BOARD)/mbx8xx.c */ |
| void mbx_init (void); |
| void board_serial_init (void); |
| void board_ether_init (void); |
| #endif |
| |
| #ifdef CONFIG_HERMES |
| /* $(BOARD)/hermes.c */ |
| void hermes_start_lxt980 (int speed); |
| #endif |
| |
| #ifdef CONFIG_EVB64260 |
| void evb64260_init(void); |
| void debug_led(int, int); |
| void display_mem_map(void); |
| void perform_soft_reset(void); |
| #endif |
| |
| /* $(BOARD)/$(BOARD).c */ |
| int board_early_init_f (void); |
| int board_late_init (void); |
| int board_postclk_init (void); /* after clocks/timebase, before env/serial */ |
| int board_early_init_r (void); |
| void board_poweroff (void); |
| |
| #if defined(CONFIG_SYS_DRAM_TEST) |
| int testdram(void); |
| #endif /* CONFIG_SYS_DRAM_TEST */ |
| |
| /* $(CPU)/start.S */ |
| #if defined(CONFIG_5xx) || \ |
| defined(CONFIG_8xx) |
| uint get_immr (uint); |
| #endif |
| uint get_pir (void); |
| #if defined(CONFIG_MPC5xxx) |
| uint get_svr (void); |
| #endif |
| uint get_pvr (void); |
| uint get_svr (void); |
| uint rd_ic_cst (void); |
| void wr_ic_cst (uint); |
| void wr_ic_adr (uint); |
| uint rd_dc_cst (void); |
| void wr_dc_cst (uint); |
| void wr_dc_adr (uint); |
| int icache_status (void); |
| void icache_enable (void); |
| void icache_disable(void); |
| int dcache_status (void); |
| void dcache_enable (void); |
| void dcache_disable(void); |
| void mmu_disable(void); |
| #if defined(CONFIG_ARM) |
| void relocate_code(ulong); |
| #else |
| void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn)); |
| #endif |
| ulong get_endaddr (void); |
| void trap_init (ulong); |
| #if defined (CONFIG_4xx) || \ |
| defined (CONFIG_MPC5xxx) || \ |
| defined (CONFIG_74xx_7xx) || \ |
| defined (CONFIG_74x) || \ |
| defined (CONFIG_75x) || \ |
| defined (CONFIG_74xx) || \ |
| defined (CONFIG_MPC85xx) || \ |
| defined (CONFIG_MPC86xx) || \ |
| defined (CONFIG_MPC83xx) |
| unsigned char in8(unsigned int); |
| void out8(unsigned int, unsigned char); |
| unsigned short in16(unsigned int); |
| unsigned short in16r(unsigned int); |
| void out16(unsigned int, unsigned short value); |
| void out16r(unsigned int, unsigned short value); |
| unsigned long in32(unsigned int); |
| unsigned long in32r(unsigned int); |
| void out32(unsigned int, unsigned long value); |
| void out32r(unsigned int, unsigned long value); |
| void ppcDcbf(unsigned long value); |
| void ppcDcbi(unsigned long value); |
| void ppcSync(void); |
| void ppcDcbz(unsigned long value); |
| #endif |
| #if defined (CONFIG_MICROBLAZE) |
| unsigned short in16(unsigned int); |
| void out16(unsigned int, unsigned short value); |
| #endif |
| |
| #if defined (CONFIG_MPC83xx) |
| void ppcDWload(unsigned int *addr, unsigned int *ret); |
| void ppcDWstore(unsigned int *addr, unsigned int *value); |
| void disable_addr_trans(void); |
| void enable_addr_trans(void); |
| #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) |
| void ddr_enable_ecc(unsigned int dram_size); |
| #endif |
| #endif |
| |
| /* $(CPU)/cpu.c */ |
| static inline int cpumask_next(int cpu, unsigned int mask) |
| { |
| for (cpu++; !((1 << cpu) & mask); cpu++) |
| ; |
| |
| return cpu; |
| } |
| |
| #define for_each_cpu(iter, cpu, num_cpus, mask) \ |
| for (iter = 0, cpu = cpumask_next(-1, mask); \ |
| iter < num_cpus; \ |
| iter++, cpu = cpumask_next(cpu, mask)) \ |
| |
| int cpu_numcores (void); |
| u32 cpu_mask (void); |
| int is_core_valid (unsigned int); |
| int probecpu (void); |
| int checkcpu (void); |
| int checkicache (void); |
| int checkdcache (void); |
| void upmconfig (unsigned int, unsigned int *, unsigned int); |
| ulong get_tbclk (void); |
| void reset_cpu (ulong addr); |
| #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP) |
| void ft_cpu_setup(void *blob, bd_t *bd); |
| #ifdef CONFIG_PCI |
| void ft_pci_setup(void *blob, bd_t *bd); |
| #endif |
| #endif |
| |
| |
| /* $(CPU)/serial.c */ |
| int serial_init (void); |
| void serial_setbrg (void); |
| void serial_putc (const char); |
| void serial_putc_raw(const char); |
| void serial_puts (const char *); |
| int serial_getc (void); |
| int serial_tstc (void); |
| |
| void _serial_setbrg (const int); |
| void _serial_putc (const char, const int); |
| void _serial_putc_raw(const char, const int); |
| void _serial_puts (const char *, const int); |
| int _serial_getc (const int); |
| int _serial_tstc (const int); |
| |
| /* $(CPU)/speed.c */ |
| int get_clocks (void); |
| int get_clocks_866 (void); |
| int sdram_adjust_866 (void); |
| int adjust_sdram_tbs_8xx (void); |
| #if defined(CONFIG_8260) |
| int prt_8260_clks (void); |
| #elif defined(CONFIG_MPC5xxx) |
| int prt_mpc5xxx_clks (void); |
| #endif |
| #ifdef CONFIG_4xx |
| ulong get_OPB_freq (void); |
| ulong get_PCI_freq (void); |
| #endif |
| #if defined(CONFIG_S3C24X0) || \ |
| defined(CONFIG_LH7A40X) || \ |
| defined(CONFIG_EP93XX) |
| ulong get_FCLK (void); |
| ulong get_HCLK (void); |
| ulong get_PCLK (void); |
| ulong get_UCLK (void); |
| #endif |
| #if defined(CONFIG_LH7A40X) |
| ulong get_PLLCLK (void); |
| #endif |
| #if defined CONFIG_INCA_IP |
| uint incaip_get_cpuclk (void); |
| #endif |
| #if defined(CONFIG_IMX) |
| ulong get_systemPLLCLK(void); |
| ulong get_FCLK(void); |
| ulong get_HCLK(void); |
| ulong get_BCLK(void); |
| ulong get_PERCLK1(void); |
| ulong get_PERCLK2(void); |
| ulong get_PERCLK3(void); |
| #endif |
| ulong get_bus_freq (ulong); |
| int get_serial_clock(void); |
| |
| #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) |
| ulong get_ddr_freq(ulong); |
| #endif |
| #if defined(CONFIG_MPC85xx) |
| typedef MPC85xx_SYS_INFO sys_info_t; |
| void get_sys_info ( sys_info_t * ); |
| #endif |
| #if defined(CONFIG_MPC86xx) |
| typedef MPC86xx_SYS_INFO sys_info_t; |
| void get_sys_info ( sys_info_t * ); |
| static inline ulong get_ddr_freq(ulong dummy) |
| { |
| return get_bus_freq(dummy); |
| } |
| #endif |
| |
| #if defined(CONFIG_4xx) |
| # if defined(CONFIG_440) |
| # if defined(CONFIG_440SPE) |
| unsigned long determine_sysper(void); |
| unsigned long determine_pci_clock_per(void); |
| # endif |
| # endif |
| typedef PPC4xx_SYS_INFO sys_info_t; |
| int ppc440spe_revB(void); |
| void get_sys_info ( sys_info_t * ); |
| #endif |
| |
| /* $(CPU)/cpu_init.c */ |
| #if defined(CONFIG_8xx) || defined(CONFIG_8260) |
| void cpu_init_f (volatile immap_t *immr); |
| #endif |
| #if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx) |
| void cpu_init_f (void); |
| #endif |
| |
| int cpu_init_r (void); |
| #if defined(CONFIG_8260) |
| int prt_8260_rsr (void); |
| #elif defined(CONFIG_MPC83xx) |
| int prt_83xx_rsr (void); |
| #endif |
| |
| /* $(CPU)/interrupts.c */ |
| int interrupt_init (void); |
| void timer_interrupt (struct pt_regs *); |
| void external_interrupt (struct pt_regs *); |
| void irq_install_handler(int, interrupt_handler_t *, void *); |
| void irq_free_handler (int); |
| void reset_timer (void); |
| ulong get_timer (ulong base); |
| |
| /* Return value of monotonic microsecond timer */ |
| unsigned long timer_get_us(void); |
| |
| void enable_interrupts (void); |
| int disable_interrupts (void); |
| |
| /* $(CPU)/.../commproc.c */ |
| int dpram_init (void); |
| uint dpram_base(void); |
| uint dpram_base_align(uint align); |
| uint dpram_alloc(uint size); |
| uint dpram_alloc_align(uint size,uint align); |
| void bootcount_store (ulong); |
| ulong bootcount_load (void); |
| #define BOOTCOUNT_MAGIC 0xB001C041 |
| |
| /* $(CPU)/.../<eth> */ |
| void mii_init (void); |
| |
| /* $(CPU)/.../lcd.c */ |
| ulong lcd_setmem (ulong); |
| |
| /* $(CPU)/.../video.c */ |
| ulong video_setmem (ulong); |
| |
| /* arch/$(ARCH)/lib/cache.c */ |
| void enable_caches(void); |
| void flush_cache (unsigned long, unsigned long); |
| void flush_dcache_all(void); |
| void flush_dcache_range(unsigned long start, unsigned long stop); |
| void invalidate_dcache_range(unsigned long start, unsigned long stop); |
| void invalidate_dcache_all(void); |
| void invalidate_icache_all(void); |
| |
| /* arch/$(ARCH)/lib/ticks.S */ |
| unsigned long long get_ticks(void); |
| void wait_ticks (unsigned long); |
| |
| /* arch/$(ARCH)/lib/time.c */ |
| void __udelay (unsigned long); |
| ulong usec2ticks (unsigned long usec); |
| ulong ticks2usec (unsigned long ticks); |
| int init_timebase (void); |
| |
| /* lib/gunzip.c */ |
| int gunzip(void *, int, unsigned char *, unsigned long *); |
| int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, |
| int stoponerr, int offset); |
| |
| /* lib/qsort.c */ |
| void qsort(void *base, size_t nmemb, size_t size, |
| int(*compar)(const void *, const void *)); |
| int strcmp_compar(const void *, const void *); |
| |
| /* lib/time.c */ |
| void udelay (unsigned long); |
| void mdelay(unsigned long); |
| |
| /* lib/uuid.c */ |
| void uuid_str_to_bin(const char *uuid, unsigned char *out); |
| int uuid_str_valid(const char *uuid); |
| |
| /* lib/vsprintf.c */ |
| #include <vsprintf.h> |
| |
| /* lib/strmhz.c */ |
| char * strmhz(char *buf, unsigned long hz); |
| |
| /* lib/crc32.c */ |
| #include <u-boot/crc.h> |
| |
| /* lib/rand.c */ |
| #if defined(CONFIG_RANDOM_MACADDR) || \ |
| defined(CONFIG_BOOTP_RANDOM_DELAY) || \ |
| defined(CONFIG_CMD_LINK_LOCAL) |
| #define RAND_MAX -1U |
| void srand(unsigned int seed); |
| unsigned int rand(void); |
| unsigned int rand_r(unsigned int *seedp); |
| #endif |
| |
| /* common/console.c */ |
| int console_init_f(void); /* Before relocation; uses the serial stuff */ |
| int console_init_r(void); /* After relocation; uses the console stuff */ |
| int console_assign(int file, const char *devname); /* Assign the console */ |
| int ctrlc (void); |
| int had_ctrlc (void); /* have we had a Control-C since last clear? */ |
| void clear_ctrlc (void); /* clear the Control-C condition */ |
| int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */ |
| |
| /* |
| * STDIO based functions (can always be used) |
| */ |
| /* serial stuff */ |
| int serial_printf (const char *fmt, ...) |
| __attribute__ ((format (__printf__, 1, 2))); |
| /* stdin */ |
| int getc(void); |
| int tstc(void); |
| |
| /* stdout */ |
| void putc(const char c); |
| void puts(const char *s); |
| int printf(const char *fmt, ...) |
| __attribute__ ((format (__printf__, 1, 2))); |
| int vprintf(const char *fmt, va_list args); |
| |
| /* stderr */ |
| #define eputc(c) fputc(stderr, c) |
| #define eputs(s) fputs(stderr, s) |
| #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args) |
| |
| /* |
| * FILE based functions (can only be used AFTER relocation!) |
| */ |
| #define stdin 0 |
| #define stdout 1 |
| #define stderr 2 |
| #define MAX_FILES 3 |
| |
| int fprintf(int file, const char *fmt, ...) |
| __attribute__ ((format (__printf__, 2, 3))); |
| void fputs(int file, const char *s); |
| void fputc(int file, const char c); |
| int ftstc(int file); |
| int fgetc(int file); |
| |
| /* lib/gzip.c */ |
| int gzip(void *dst, unsigned long *lenp, |
| unsigned char *src, unsigned long srclen); |
| int zzip(void *dst, unsigned long *lenp, unsigned char *src, |
| unsigned long srclen, int stoponerr, |
| int (*func)(unsigned long, unsigned long)); |
| |
| /* lib/net_utils.c */ |
| #include <net.h> |
| static inline IPaddr_t getenv_IPaddr(char *var) |
| { |
| return string_to_ip(getenv(var)); |
| } |
| |
| /* |
| * CONSOLE multiplexing. |
| */ |
| #ifdef CONFIG_CONSOLE_MUX |
| #include <iomux.h> |
| #endif |
| |
| int pcmcia_init (void); |
| |
| #ifdef CONFIG_STATUS_LED |
| # include <status_led.h> |
| #endif |
| |
| #include <bootstage.h> |
| |
| #ifdef CONFIG_SHOW_ACTIVITY |
| void show_activity(int arg); |
| #endif |
| |
| /* Multicore arch functions */ |
| #ifdef CONFIG_MP |
| int cpu_status(int nr); |
| int cpu_reset(int nr); |
| int cpu_disable(int nr); |
| int cpu_release(int nr, int argc, char * const argv[]); |
| #endif |
| |
| /* Define a null map_sysmem() if the architecture doesn't use it */ |
| # ifndef CONFIG_ARCH_MAP_SYSMEM |
| static inline void *map_sysmem(phys_addr_t paddr, unsigned long len) |
| { |
| return (void *)(uintptr_t)paddr; |
| } |
| |
| static inline void unmap_sysmem(const void *vaddr) |
| { |
| } |
| |
| static inline phys_addr_t map_to_sysmem(void *ptr) |
| { |
| return (phys_addr_t)(uintptr_t)ptr; |
| } |
| # endif |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #ifdef CONFIG_PPC |
| /* |
| * Has to be included outside of the #ifndef __ASSEMBLY__ section. |
| * Otherwise might lead to compilation errors in assembler files. |
| */ |
| #include <asm/cache.h> |
| #endif |
| |
| /* Put only stuff here that the assembler can digest */ |
| |
| #ifdef CONFIG_POST |
| #define CONFIG_HAS_POST |
| #ifndef CONFIG_POST_ALT_LIST |
| #define CONFIG_POST_STD_LIST |
| #endif |
| #endif |
| |
| #ifdef CONFIG_INIT_CRITICAL |
| #error CONFIG_INIT_CRITICAL is deprecated! |
| #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. |
| #endif |
| |
| #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) |
| |
| #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) |
| #define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d)) |
| #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) |
| #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) |
| |
| #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1) |
| #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) |
| |
| /* |
| * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It |
| * is used to align DMA buffers. |
| */ |
| #ifndef __ASSEMBLY__ |
| #include <asm/cache.h> |
| #endif |
| |
| /* |
| * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the |
| * stack that meets the minimum architecture alignment requirements for DMA. |
| * Such a buffer is useful for DMA operations where flushing and invalidating |
| * the cache before and after a read and/or write operation is required for |
| * correct operations. |
| * |
| * When called the macro creates an array on the stack that is sized such |
| * that: |
| * |
| * 1) The beginning of the array can be advanced enough to be aligned. |
| * |
| * 2) The size of the aligned portion of the array is a multiple of the minimum |
| * architecture alignment required for DMA. |
| * |
| * 3) The aligned portion contains enough space for the original number of |
| * elements requested. |
| * |
| * The macro then creates a pointer to the aligned portion of this array and |
| * assigns to the pointer the address of the first element in the aligned |
| * portion of the array. |
| * |
| * Calling the macro as: |
| * |
| * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024); |
| * |
| * Will result in something similar to saying: |
| * |
| * uint32_t buffer[1024]; |
| * |
| * The following differences exist: |
| * |
| * 1) The resulting buffer is guaranteed to be aligned to the value of |
| * ARCH_DMA_MINALIGN. |
| * |
| * 2) The buffer variable created by the macro is a pointer to the specified |
| * type, and NOT an array of the specified type. This can be very important |
| * if you want the address of the buffer, which you probably do, to pass it |
| * to the DMA hardware. The value of &buffer is different in the two cases. |
| * In the macro case it will be the address of the pointer, not the address |
| * of the space reserved for the buffer. However, in the second case it |
| * would be the address of the buffer. So if you are replacing hard coded |
| * stack buffers with this macro you need to make sure you remove the & from |
| * the locations where you are taking the address of the buffer. |
| * |
| * Note that the size parameter is the number of array elements to allocate, |
| * not the number of bytes. |
| * |
| * This macro can not be used outside of function scope, or for the creation |
| * of a function scoped static buffer. It can not be used to create a cache |
| * line aligned global buffer. |
| */ |
| #define PAD_COUNT(s, pad) ((s - 1) / pad + 1) |
| #define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad) |
| #define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad) \ |
| char __##name[ROUND(PAD_SIZE(size * sizeof(type), pad), align) \ |
| + (align - 1)]; \ |
| \ |
| type *name = (type *) ALIGN((uintptr_t)__##name, align) |
| #define ALLOC_ALIGN_BUFFER(type, name, size, align) \ |
| ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, 1) |
| #define ALLOC_CACHE_ALIGN_BUFFER_PAD(type, name, size, pad) \ |
| ALLOC_ALIGN_BUFFER_PAD(type, name, size, ARCH_DMA_MINALIGN, pad) |
| #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \ |
| ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN) |
| |
| /* |
| * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's |
| * purpose is to allow allocating aligned buffers outside of function scope. |
| * Usage of this macro shall be avoided or used with extreme care! |
| */ |
| #define DEFINE_ALIGN_BUFFER(type, name, size, align) \ |
| static char __##name[roundup(size * sizeof(type), align)] \ |
| __aligned(align); \ |
| \ |
| static type *name = (type *)__##name |
| #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \ |
| DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN) |
| |
| /* Pull in stuff for the build system */ |
| #ifdef DO_DEPS_ONLY |
| # include <environment.h> |
| #endif |
| |
| #endif /* __COMMON_H_ */ |