| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2011 Samsung Electronics |
| * Lukasz Majewski <l.majewski@samsung.com> |
| * |
| * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. |
| */ |
| |
| #include <common.h> |
| #include <blk.h> |
| #include <command.h> |
| #include <console.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <g_dnl.h> |
| #include <malloc.h> |
| #include <part.h> |
| #include <usb.h> |
| #include <usb_mass_storage.h> |
| #include <watchdog.h> |
| #include <linux/delay.h> |
| #include <linux/printk.h> |
| |
| static int ums_read_sector(struct ums *ums_dev, |
| ulong start, lbaint_t blkcnt, void *buf) |
| { |
| struct blk_desc *block_dev = &ums_dev->block_dev; |
| lbaint_t blkstart = start + ums_dev->start_sector; |
| |
| //printf("%s: blk %s read %lu bytes @ %#lx\n", __func__, block_dev->bdev->name, blkcnt, blkstart); |
| |
| return blk_dread(block_dev, blkstart, blkcnt, buf); |
| } |
| |
| static int ums_write_sector(struct ums *ums_dev, |
| ulong start, lbaint_t blkcnt, const void *buf) |
| { |
| struct blk_desc *block_dev = &ums_dev->block_dev; |
| lbaint_t blkstart = start + ums_dev->start_sector; |
| |
| return blk_dwrite(block_dev, blkstart, blkcnt, buf); |
| } |
| |
| static struct ums *ums; |
| static int ums_count; |
| |
| static void ums_fini(void) |
| { |
| int i; |
| |
| for (i = 0; i < ums_count; i++) |
| free((void *)ums[i].name); |
| free(ums); |
| ums = NULL; |
| ums_count = 0; |
| } |
| |
| #define UMS_NAME_LEN 16 |
| |
| static int ums_init(const char *devtype, const char *devnums_part_str) |
| { |
| char *s, *t, *devnum_part_str, *name; |
| struct blk_desc *block_dev; |
| struct disk_partition info; |
| int partnum; |
| int ret = -1; |
| struct ums *ums_new; |
| |
| s = strdup(devnums_part_str); |
| if (!s) |
| return -1; |
| |
| t = s; |
| ums_count = 0; |
| |
| for (;;) { |
| devnum_part_str = strsep(&t, ","); |
| if (!devnum_part_str) |
| break; |
| |
| partnum = part_get_info_by_dev_and_name_or_num(devtype, devnum_part_str, |
| &block_dev, &info, 1); |
| |
| if (partnum < 0) |
| goto cleanup; |
| |
| /* Check if the argument is in legacy format. If yes, |
| * expose all partitions by setting the partnum = 0 |
| * e.g. ums 0 mmc 0 |
| */ |
| if (!strchr(devnum_part_str, ':')) |
| partnum = 0; |
| |
| ums_new = realloc(ums, (ums_count + 1) * sizeof(*ums)); |
| if (!ums_new) |
| goto cleanup; |
| ums = ums_new; |
| |
| /* if partnum = 0, expose all partitions */ |
| if (partnum == 0) { |
| ums[ums_count].start_sector = 0; |
| ums[ums_count].num_sectors = block_dev->lba; |
| } else { |
| ums[ums_count].start_sector = info.start; |
| ums[ums_count].num_sectors = info.size; |
| } |
| |
| ums[ums_count].read_sector = ums_read_sector; |
| ums[ums_count].write_sector = ums_write_sector; |
| |
| name = malloc(UMS_NAME_LEN); |
| if (!name) |
| goto cleanup; |
| snprintf(name, UMS_NAME_LEN, "UMS disk %d", ums_count); |
| ums[ums_count].name = name; |
| ums[ums_count].block_dev = *block_dev; |
| |
| printf("UMS: LUN %d, dev %s %d, hwpart %d, sector %#x, count %#x\n", |
| ums_count, devtype, ums[ums_count].block_dev.devnum, |
| ums[ums_count].block_dev.hwpart, |
| ums[ums_count].start_sector, |
| ums[ums_count].num_sectors); |
| |
| ums_count++; |
| } |
| |
| if (ums_count) |
| ret = 0; |
| |
| cleanup: |
| free(s); |
| |
| if (ret < 0) |
| ums_fini(); |
| |
| return ret; |
| } |
| |
| static int do_usb_mass_storage(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| const char *usb_controller; |
| const char *devtype; |
| const char *devnum; |
| unsigned int controller_index; |
| struct udevice *udc; |
| int rc; |
| int cable_ready_timeout __maybe_unused; |
| |
| if (argc < 3) |
| return CMD_RET_USAGE; |
| |
| usb_controller = argv[1]; |
| if (argc >= 4) { |
| devtype = argv[2]; |
| devnum = argv[3]; |
| } else { |
| devtype = "mmc"; |
| devnum = argv[2]; |
| } |
| |
| rc = ums_init(devtype, devnum); |
| if (rc < 0) |
| return CMD_RET_FAILURE; |
| |
| controller_index = (unsigned int)(simple_strtoul( |
| usb_controller, NULL, 0)); |
| rc = udc_device_get_by_index(controller_index, &udc); |
| if (rc) { |
| pr_err("Couldn't init USB controller.\n"); |
| rc = CMD_RET_FAILURE; |
| goto cleanup_ums_init; |
| } |
| |
| rc = fsg_init(ums, ums_count, udc); |
| if (rc) { |
| pr_err("fsg_init failed\n"); |
| rc = CMD_RET_FAILURE; |
| goto cleanup_board; |
| } |
| |
| rc = g_dnl_register("usb_dnl_ums"); |
| if (rc) { |
| pr_err("g_dnl_register failed\n"); |
| rc = CMD_RET_FAILURE; |
| goto cleanup_board; |
| } |
| |
| /* Timeout unit: seconds */ |
| cable_ready_timeout = UMS_CABLE_READY_TIMEOUT; |
| |
| if (!g_dnl_board_usb_cable_connected()) { |
| /* |
| * Won't execute if we don't know whether the cable is |
| * connected. |
| */ |
| puts("Please connect USB cable.\n"); |
| |
| while (!g_dnl_board_usb_cable_connected()) { |
| if (ctrlc()) { |
| puts("\rCTRL+C - Operation aborted.\n"); |
| rc = CMD_RET_SUCCESS; |
| goto cleanup_register; |
| } |
| if (!cable_ready_timeout) { |
| puts("\rUSB cable not detected.\n" \ |
| "Command exit.\n"); |
| rc = CMD_RET_SUCCESS; |
| goto cleanup_register; |
| } |
| |
| printf("\rAuto exit in: %.2d s.", cable_ready_timeout); |
| mdelay(1000); |
| cable_ready_timeout--; |
| } |
| puts("\r\n"); |
| } |
| |
| while (1) { |
| dm_usb_gadget_handle_interrupts(udc); |
| |
| rc = fsg_main_thread(NULL); |
| if (rc) { |
| /* Check I/O error */ |
| if (rc == -EIO) |
| printf("\rCheck USB cable connection\n"); |
| |
| /* Check CTRL+C */ |
| if (rc == -EPIPE) |
| printf("\rCTRL+C - Operation aborted\n"); |
| |
| rc = CMD_RET_SUCCESS; |
| goto cleanup_register; |
| } |
| |
| if (IS_ENABLED(CONFIG_CMD_UMS_ABORT_KEYED)) { |
| /* Abort by pressing any key */ |
| if (tstc()) { |
| getchar(); |
| printf("\rOperation aborted.\n"); |
| rc = CMD_RET_SUCCESS; |
| goto cleanup_register; |
| } |
| } |
| |
| schedule(); |
| } |
| |
| cleanup_register: |
| g_dnl_unregister(); |
| cleanup_board: |
| udc_device_put(udc); |
| cleanup_ums_init: |
| ums_fini(); |
| |
| return rc; |
| } |
| |
| U_BOOT_CMD(ums, 4, 1, do_usb_mass_storage, |
| "Use the UMS [USB Mass Storage]", |
| "<USB_controller> [<devtype>] <dev[:part]> e.g. ums 0 mmc 0\n" |
| " devtype defaults to mmc" |
| ); |