blob: 5131175045fb98aaa2fb5b179d2188ab29353d29 [file] [log] [blame]
/*
* (C) Copyright 2002
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_HHP_CRADLE 1 /* on an Cradle Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
*/
#define CONFIG_DRIVER_SMC91111
#define CONFIG_SMC91111_BASE 0x10000300
#define CONFIG_SMC91111_EXT_PHY
#define CONFIG_SMC_USE_32_BIT
/*
* select serial console configuration
*/
#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 console=ttyS0,115200"
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_IPADDR 192.168.0.21
#define CONFIG_SERVERIP 192.168.0.250
#define CONFIG_BOOTCOMMAND "bootm 40000"
#define CONFIG_CMDLINE_TAG
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x01000000 /* 64 MB */
#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */
#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
#define CONFIG_SYS_DRAM_BASE 0xa0000000
#define CONFIG_SYS_DRAM_SIZE 0x04000000
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
/*
* FLASH and environment organization
*/
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max number of sectors on one chip */
/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR 0x00020000 /* absolute address for now */
#define CONFIG_ENV_SIZE 0x20000 /* 8K ouch, this may later be */
/******************************************************************************
*
* CPU specific defines
*
******************************************************************************/
/*
* GPIO settings
*
* GPIO pin assignments
* GPIO Name Dir Out AF
* 0 NC
* 1 NC
* 2 SIRQ1 I
* 3 SIRQ2 I
* 4 SIRQ3 I
* 5 DMAACK1 O 0
* 6 DMAACK2 O 0
* 7 DMAACK3 O 0
* 8 TC1 O 0
* 9 TC2 O 0
* 10 TC3 O 0
* 11 nDMAEN O 1
* 12 AENCTRL O 0
* 13 PLDTC O 0
* 14 ETHIRQ I
* 15 NC
* 16 NC
* 17 NC
* 18 RDY I
* 19 DMASIO I
* 20 ETHIRQ NC
* 21 NC
* 22 PGMEN O 1 FIXME for debug only enable flash
* 23 NC
* 24 NC
* 25 NC
* 26 NC
* 27 NC
* 28 NC
* 29 NC
* 30 NC
* 31 NC
* 32 NC
* 33 NC
* 34 FFRXD I 01
* 35 FFCTS I 01
* 36 FFDCD I 01
* 37 FFDSR I 01
* 38 FFRI I 01
* 39 FFTXD O 1 10
* 40 FFDTR O 0 10
* 41 FFRTS O 0 10
* 42 RS232FOFF O 0 00
* 43 NC
* 44 NC
* 45 IRSL0 O 0
* 46 IRRX0 I 01
* 47 IRTX0 O 0 10
* 48 NC
* 49 nIOWE O 0
* 50 NC
* 51 NC
* 52 NC
* 53 NC
* 54 NC
* 55 NC
* 56 NC
* 57 NC
* 58 DKDIRQ I
* 59 NC
* 60 NC
* 61 NC
* 62 NC
* 63 NC
* 64 COMLED O 0
* 65 COMLED O 0
* 66 COMLED O 0
* 67 COMLED O 0
* 68 COMLED O 0
* 69 COMLED O 0
* 70 COMLED O 0
* 71 COMLED O 0
* 72 NC
* 73 NC
* 74 NC
* 75 NC
* 76 NC
* 77 NC
* 78 CSIO O 1
* 79 NC
* 80 CSETH O 1
*
* NOTE: All NC's are defined to be outputs
*
*/
/* Pin direction control */
/* NOTE GPIO 0, 61, 62 are set for inputs due to CPLD SPAREs */
#define CONFIG_SYS_GPDR0_VAL 0xfff3bf02
#define CONFIG_SYS_GPDR1_VAL 0xfbffbf83
#define CONFIG_SYS_GPDR2_VAL 0x0001ffff
/* Set and Clear registers */
#define CONFIG_SYS_GPSR0_VAL 0x00400800
#define CONFIG_SYS_GPSR1_VAL 0x00000480
#define CONFIG_SYS_GPSR2_VAL 0x00014000
#define CONFIG_SYS_GPCR0_VAL 0x00000000
#define CONFIG_SYS_GPCR1_VAL 0x00000000
#define CONFIG_SYS_GPCR2_VAL 0x00000000
/* Edge detect registers (these are set by the kernel) */
#define CONFIG_SYS_GRER0_VAL 0x00000000
#define CONFIG_SYS_GRER1_VAL 0x00000000
#define CONFIG_SYS_GRER2_VAL 0x00000000
#define CONFIG_SYS_GFER0_VAL 0x00000000
#define CONFIG_SYS_GFER1_VAL 0x00000000
#define CONFIG_SYS_GFER2_VAL 0x00000000
/* Alternate function registers */
#define CONFIG_SYS_GAFR0_L_VAL 0x00000000
#define CONFIG_SYS_GAFR0_U_VAL 0x00000010
#define CONFIG_SYS_GAFR1_L_VAL 0x900a9550
#define CONFIG_SYS_GAFR1_U_VAL 0x00000008
#define CONFIG_SYS_GAFR2_L_VAL 0x20000000
#define CONFIG_SYS_GAFR2_U_VAL 0x00000002
/*
* Clocks, power control and interrupts
*/
#define CONFIG_SYS_PSSR_VAL 0x00000020
#define CONFIG_SYS_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */
#define CONFIG_SYS_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */
#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */
/* FIXME
*
* RTC settings
* Watchdog
*
*/
/*
* Memory settings
*
* FIXME Can ethernet be burst read and/or write?? This is set for lubbock
* Verify timings on all
*/
#define CONFIG_SYS_MSC0_VAL 0x000023FA /* flash bank (cs0) */
/*#define CONFIG_SYS_MSC1_VAL 0x00003549 / * SuperIO bank (cs2) */
#define CONFIG_SYS_MSC1_VAL 0x0000354c /* SuperIO bank (cs2) */
#define CONFIG_SYS_MSC2_VAL 0x00001224 /* Ethernet bank (cs4) */
#ifdef REDBOOT_WAY
#define CONFIG_SYS_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */
#define CONFIG_SYS_MDMRS_VAL 0x00000000
#define CONFIG_SYS_MDREFR_VAL 0x00018018
#else
#define CONFIG_SYS_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */
#define CONFIG_SYS_MDMRS_VAL 0x00000000
#define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */
#endif
/*
* PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
*/
#define CONFIG_SYS_MECR_VAL 0x00000000
#define CONFIG_SYS_MCMEM0_VAL 0x00010504
#define CONFIG_SYS_MCMEM1_VAL 0x00010504
#define CONFIG_SYS_MCATT0_VAL 0x00010504
#define CONFIG_SYS_MCATT1_VAL 0x00010504
#define CONFIG_SYS_MCIO0_VAL 0x00004715
#define CONFIG_SYS_MCIO1_VAL 0x00004715
/* Board specific defines */
/* LED defines */
#define YELLOW 0x03
#define RED 0x02
#define GREEN 0x01
#define OFF 0x00
#define LED_IRDA0 0
#define LED_IRDA1 2
#define LED_IRDA2 4
#define LED_IRDA3 6
#define CRADLE_LED_SET_REG GPSR2
#define CRADLE_LED_CLR_REG GPCR2
/* SuperIO defines */
#define CRADLE_SIO_INDEX 0x2e
#define CRADLE_SIO_DATA 0x2f
/* IO defines */
#define CRADLE_CPLD_PHYS 0x08000000
#define CRADLE_SIO1_PHYS 0x08100000
#define CRADLE_SIO2_PHYS 0x08200000
#define CRADLE_SIO3_PHYS 0x08300000
#define CRADLE_ETH_PHYS 0x10000000
#ifndef __ASSEMBLY__
/* global prototypes */
void led_code(int code, int color);
#endif
#endif /* __CONFIG_H */