blob: 01de08fab70ddb5301290a77e8abc0630c44e836 [file] [log] [blame]
/*
* (C) Copyright 2005
* STMicroelectronics.
* Configuration settings for the STn8815 nomadik board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_ARM926EJS
#define CONFIG_NOMADIK
#define CONFIG_NOMADIK_8815
#define CONFIG_NOMADIK_NDK15
#define CONFIG_NOMADIK_NHK15
#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */
/* commands */
#include <config_cmd_default.h>
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
/* At this point there is no flash driver, so remove some commands */
#undef CONFIG_CMD_ENV
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_IMLS
/* user interface */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "Nomadik> "
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_LOAD_ADDR 0x800000 /* default load address */
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/* boot config */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_CMDLINE_TAG
#define CONFIG_BOOTDELAY 1
#define CONFIG_BOOTARGS "root=/dev/ram0 console=ttyAMA1,115200n8 init=linuxrc"
#define CONFIG_BOOTCOMMAND "fsload 0x100000 kernel.uimg;" \
" fsload 0x800000 initrd.gz.uimg;" \
" bootm 0x100000 0x800000"
/* memory-related information */
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
#define PHYS_SDRAM_2 0x08000000 /* SDR-SDRAM BANK #2*/
#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
# define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */
# define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */
#endif
#define CONFIG_SYS_MEMTEST_START 0x00000000
#define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024)
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */
#define CONFIG_MISC_INIT_R /* call misc_init_r during start up */
/* timing informazion */
#define CONFIG_SYS_HZ (2400000 / 256) /* Timer0: 2.4Mhz + divider */
#define CONFIG_SYS_TIMERBASE 0x101E2000
#undef CONFIG_SYS_CLKS_IN_HZ
/* serial port (PL011) configuration */
#define CONFIG_PL011_SERIAL
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CFG_SERIAL0 0x101FD000
#define CFG_SERIAL1 0x101FB000
#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
#define CONFIG_PL011_CLOCK 48000000
/* Ethernet */
#define PCI_MEMORY_VADDR 0xe8000000
#define PCI_IO_VADDR 0xee000000
#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a)))
#define __mem_isa(a) ((a) + PCI_MEMORY_VADDR)
#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111*/
#define CONFIG_SMC91111_BASE 0x34000300
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
#define CONFIG_SMC_USE_32_BIT
#define CONFIG_BOOTFILE "uImage"
/* flash memory and filesystem information */
#define CONFIG_DOS_PARTITION
#define CONFIG_MTD_ONENAND_VERIFY_WRITE
#define CONFIG_SYS_ONENAND_BASE 0x30000000
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NO_FLASH
#ifdef CONFIG_BOOT_ONENAND
# undef CONFIG_CMD_NAND /* Temporary: nand and onenand can't coexist */
/* Partition Size Start
* XloaderTOC + X-Loader 256KB 0x00000000
* Memory init function 256KB 0x00040000
* U-Boot 2MB 0x00080000
* Sysimage (kernel + ramdisk) 4MB 0x00280000
* JFFS2 Root filesystem 22MB 0x00680000
* JFFS2 User Data 227.5MB 0x01C80000
*/
# define CONFIG_JFFS2_PART_SIZE 0x400000
# define CONFIG_JFFS2_PART_OFFSET 0x280000
# define CONFIG_ENV_IS_IN_ONENAND
# define CONFIG_ENV_SIZE (256 * 1024)
# define CONFIG_ENV_ADDR 0x30300000
#else /* ! CONFIG_BOOT_ONENAND */
# undef CONFIG_CMD_ONENAND /* Temporary: nand and onenand can't coexist */
# define CONFIG_JFFS2_DEV "nand0"
# define CONFIG_JFFS2_NAND 1 /* For the jffs2 support*/
# define CONFIG_JFFS2_PART_SIZE 0x00300000
# define CONFIG_JFFS2_PART_OFFSET 0x00280000
# define CONFIG_ENV_IS_IN_NAND
# define CONFIG_ENV_SIZE 0x20000 /*128 Kb*/
# define CONFIG_ENV_OFFSET (0x8000000 - CONFIG_ENV_SIZE)
#endif /* CONFIG_BOOT_ONENAND */
/* Temporarily, until we have no driver, env is not in nand */
#undef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_IS_NOWHERE
/* this is needed to make hello_world.c and other stuff happy */
#define CONFIG_SYS_MAX_FLASH_SECT 512
#define CONFIG_SYS_MAX_FLASH_BANKS 1
/* base addresses of our peripherals */
#define NOMADIK_SRC_BASE 0x101E0000 /* System and Reset Cnt */
#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
#define NOMADIK_MPMC_BASE 0x10110000 /* SDRAM Controller */
#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC Controller */
#define NOMADIK_1NAND_BASE 0x30000000
#define NOMADIK_GPIO0_BASE 0x101E4000
#define NOMADIK_GPIO1_BASE 0x101E5000
#define NOMADIK_GPIO2_BASE 0x101E6000
#define NOMADIK_GPIO3_BASE 0x101E7000
#define NOMADIK_CPLD_BASE 0x36000000
#define NOMADIK_UART0_BASE 0x101FD000
#define NOMADIK_UART1_BASE 0x101FB000
#define NOMADIK_UART2_BASE 0x101F2000
#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
#define NOMADIK_RTC_BASE 0x101E8000
#define NOMADIK_ETH0_BASE 0x36800300
#define NOMADIK_CPLD_UART_BASE 0x36480000
#endif /* __CONFIG_H */