| # SPDX-License-Identifier: GPL-2.0 |
| # Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. |
| |
| # Utility code shared across multiple tests. |
| |
| import hashlib |
| import inspect |
| import os |
| import os.path |
| import pytest |
| import sys |
| import time |
| import re |
| |
| def md5sum_data(data): |
| """Calculate the MD5 hash of some data. |
| |
| Args: |
| data: The data to hash. |
| |
| Returns: |
| The hash of the data, as a binary string. |
| """ |
| |
| h = hashlib.md5() |
| h.update(data) |
| return h.digest() |
| |
| def md5sum_file(fn, max_length=None): |
| """Calculate the MD5 hash of the contents of a file. |
| |
| Args: |
| fn: The filename of the file to hash. |
| max_length: The number of bytes to hash. If the file has more |
| bytes than this, they will be ignored. If None or omitted, the |
| entire file will be hashed. |
| |
| Returns: |
| The hash of the file content, as a binary string. |
| """ |
| |
| with open(fn, 'rb') as fh: |
| if max_length: |
| params = [max_length] |
| else: |
| params = [] |
| data = fh.read(*params) |
| return md5sum_data(data) |
| |
| class PersistentRandomFile(object): |
| """Generate and store information about a persistent file containing |
| random data.""" |
| |
| def __init__(self, u_boot_console, fn, size): |
| """Create or process the persistent file. |
| |
| If the file does not exist, it is generated. |
| |
| If the file does exist, its content is hashed for later comparison. |
| |
| These files are always located in the "persistent data directory" of |
| the current test run. |
| |
| Args: |
| u_boot_console: A console connection to U-Boot. |
| fn: The filename (without path) to create. |
| size: The desired size of the file in bytes. |
| |
| Returns: |
| Nothing. |
| """ |
| |
| self.fn = fn |
| |
| self.abs_fn = u_boot_console.config.persistent_data_dir + '/' + fn |
| |
| if os.path.exists(self.abs_fn): |
| u_boot_console.log.action('Persistent data file ' + self.abs_fn + |
| ' already exists') |
| self.content_hash = md5sum_file(self.abs_fn) |
| else: |
| u_boot_console.log.action('Generating ' + self.abs_fn + |
| ' (random, persistent, %d bytes)' % size) |
| data = os.urandom(size) |
| with open(self.abs_fn, 'wb') as fh: |
| fh.write(data) |
| self.content_hash = md5sum_data(data) |
| |
| def attempt_to_open_file(fn): |
| """Attempt to open a file, without throwing exceptions. |
| |
| Any errors (exceptions) that occur during the attempt to open the file |
| are ignored. This is useful in order to test whether a file (in |
| particular, a device node) exists and can be successfully opened, in order |
| to poll for e.g. USB enumeration completion. |
| |
| Args: |
| fn: The filename to attempt to open. |
| |
| Returns: |
| An open file handle to the file, or None if the file could not be |
| opened. |
| """ |
| |
| try: |
| return open(fn, 'rb') |
| except: |
| return None |
| |
| def wait_until_open_succeeds(fn): |
| """Poll until a file can be opened, or a timeout occurs. |
| |
| Continually attempt to open a file, and return when this succeeds, or |
| raise an exception after a timeout. |
| |
| Args: |
| fn: The filename to attempt to open. |
| |
| Returns: |
| An open file handle to the file. |
| """ |
| |
| for i in xrange(100): |
| fh = attempt_to_open_file(fn) |
| if fh: |
| return fh |
| time.sleep(0.1) |
| raise Exception('File could not be opened') |
| |
| def wait_until_file_open_fails(fn, ignore_errors): |
| """Poll until a file cannot be opened, or a timeout occurs. |
| |
| Continually attempt to open a file, and return when this fails, or |
| raise an exception after a timeout. |
| |
| Args: |
| fn: The filename to attempt to open. |
| ignore_errors: Indicate whether to ignore timeout errors. If True, the |
| function will simply return if a timeout occurs, otherwise an |
| exception will be raised. |
| |
| Returns: |
| Nothing. |
| """ |
| |
| for i in xrange(100): |
| fh = attempt_to_open_file(fn) |
| if not fh: |
| return |
| fh.close() |
| time.sleep(0.1) |
| if ignore_errors: |
| return |
| raise Exception('File can still be opened') |
| |
| def run_and_log(u_boot_console, cmd, ignore_errors=False): |
| """Run a command and log its output. |
| |
| Args: |
| u_boot_console: A console connection to U-Boot. |
| cmd: The command to run, as an array of argv[], or a string. |
| If a string, note that it is split up so that quoted spaces |
| will not be preserved. E.g. "fred and" becomes ['"fred', 'and"'] |
| ignore_errors: Indicate whether to ignore errors. If True, the function |
| will simply return if the command cannot be executed or exits with |
| an error code, otherwise an exception will be raised if such |
| problems occur. |
| |
| Returns: |
| The output as a string. |
| """ |
| if isinstance(cmd, str): |
| cmd = cmd.split() |
| runner = u_boot_console.log.get_runner(cmd[0], sys.stdout) |
| output = runner.run(cmd, ignore_errors=ignore_errors) |
| runner.close() |
| return output |
| |
| def run_and_log_expect_exception(u_boot_console, cmd, retcode, msg): |
| """Run a command that is expected to fail. |
| |
| This runs a command and checks that it fails with the expected return code |
| and exception method. If not, an exception is raised. |
| |
| Args: |
| u_boot_console: A console connection to U-Boot. |
| cmd: The command to run, as an array of argv[]. |
| retcode: Expected non-zero return code from the command. |
| msg: String that should be contained within the command's output. |
| """ |
| try: |
| runner = u_boot_console.log.get_runner(cmd[0], sys.stdout) |
| runner.run(cmd) |
| except Exception as e: |
| assert(retcode == runner.exit_status) |
| assert(msg in runner.output) |
| else: |
| raise Exception("Expected an exception with retcode %d message '%s'," |
| "but it was not raised" % (retcode, msg)) |
| finally: |
| runner.close() |
| |
| ram_base = None |
| def find_ram_base(u_boot_console): |
| """Find the running U-Boot's RAM location. |
| |
| Probe the running U-Boot to determine the address of the first bank |
| of RAM. This is useful for tests that test reading/writing RAM, or |
| load/save files that aren't associated with some standard address |
| typically represented in an environment variable such as |
| ${kernel_addr_r}. The value is cached so that it only needs to be |
| actively read once. |
| |
| Args: |
| u_boot_console: A console connection to U-Boot. |
| |
| Returns: |
| The address of U-Boot's first RAM bank, as an integer. |
| """ |
| |
| global ram_base |
| if u_boot_console.config.buildconfig.get('config_cmd_bdi', 'n') != 'y': |
| pytest.skip('bdinfo command not supported') |
| if ram_base == -1: |
| pytest.skip('Previously failed to find RAM bank start') |
| if ram_base is not None: |
| return ram_base |
| |
| with u_boot_console.log.section('find_ram_base'): |
| response = u_boot_console.run_command('bdinfo') |
| for l in response.split('\n'): |
| if '-> start' in l or 'memstart =' in l: |
| ram_base = int(l.split('=')[1].strip(), 16) |
| break |
| if ram_base is None: |
| ram_base = -1 |
| raise Exception('Failed to find RAM bank start in `bdinfo`') |
| |
| return ram_base |
| |
| class PersistentFileHelperCtxMgr(object): |
| """A context manager for Python's "with" statement, which ensures that any |
| generated file is deleted (and hence regenerated) if its mtime is older |
| than the mtime of the Python module which generated it, and gets an mtime |
| newer than the mtime of the Python module which generated after it is |
| generated. Objects of this type should be created by factory function |
| persistent_file_helper rather than directly.""" |
| |
| def __init__(self, log, filename): |
| """Initialize a new object. |
| |
| Args: |
| log: The Logfile object to log to. |
| filename: The filename of the generated file. |
| |
| Returns: |
| Nothing. |
| """ |
| |
| self.log = log |
| self.filename = filename |
| |
| def __enter__(self): |
| frame = inspect.stack()[1] |
| module = inspect.getmodule(frame[0]) |
| self.module_filename = module.__file__ |
| self.module_timestamp = os.path.getmtime(self.module_filename) |
| |
| if os.path.exists(self.filename): |
| filename_timestamp = os.path.getmtime(self.filename) |
| if filename_timestamp < self.module_timestamp: |
| self.log.action('Removing stale generated file ' + |
| self.filename) |
| os.unlink(self.filename) |
| |
| def __exit__(self, extype, value, traceback): |
| if extype: |
| try: |
| os.path.unlink(self.filename) |
| except: |
| pass |
| return |
| logged = False |
| for i in range(20): |
| filename_timestamp = os.path.getmtime(self.filename) |
| if filename_timestamp > self.module_timestamp: |
| break |
| if not logged: |
| self.log.action( |
| 'Waiting for generated file timestamp to increase') |
| logged = True |
| os.utime(self.filename) |
| time.sleep(0.1) |
| |
| def persistent_file_helper(u_boot_log, filename): |
| """Manage the timestamps and regeneration of a persistent generated |
| file. This function creates a context manager for Python's "with" |
| statement |
| |
| Usage: |
| with persistent_file_helper(u_boot_console.log, filename): |
| code to generate the file, if it's missing. |
| |
| Args: |
| u_boot_log: u_boot_console.log. |
| filename: The filename of the generated file. |
| |
| Returns: |
| A context manager object. |
| """ |
| |
| return PersistentFileHelperCtxMgr(u_boot_log, filename) |
| |
| def crc32(u_boot_console, address, count): |
| """Helper function used to compute the CRC32 value of a section of RAM. |
| |
| Args: |
| u_boot_console: A U-Boot console connection. |
| address: Address where data starts. |
| count: Amount of data to use for calculation. |
| |
| Returns: |
| CRC32 value |
| """ |
| |
| bcfg = u_boot_console.config.buildconfig |
| has_cmd_crc32 = bcfg.get('config_cmd_crc32', 'n') == 'y' |
| assert has_cmd_crc32, 'Cannot compute crc32 without CONFIG_CMD_CRC32.' |
| output = u_boot_console.run_command('crc32 %08x %x' % (address, count)) |
| |
| m = re.search('==> ([0-9a-fA-F]{8})$', output) |
| assert m, 'CRC32 operation failed.' |
| |
| return m.group(1) |