| #include <common.h> |
| #include <dm.h> |
| #include <dm/pinctrl.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define MAX_PINS_ONE_IP 70 |
| #define MODE_BITS_MASK 3 |
| #define OSPEED_MASK 3 |
| #define PUPD_MASK 3 |
| #define OTYPE_MSK 1 |
| #define AFR_MASK 0xF |
| |
| #ifndef CONFIG_SPL_BUILD |
| struct stm32_pinctrl_priv { |
| int pinctrl_ngpios; |
| struct list_head gpio_dev; |
| }; |
| |
| struct stm32_gpio_bank { |
| struct udevice *gpio_dev; |
| struct list_head list; |
| }; |
| |
| #define MAX_PIN_PER_BANK 16 |
| |
| static char pin_name[PINNAME_SIZE]; |
| #define PINMUX_MODE_COUNT 5 |
| static const char * const pinmux_mode[PINMUX_MODE_COUNT] = { |
| "gpio input", |
| "gpio output", |
| "analog", |
| "unknown", |
| "alt function", |
| }; |
| |
| static int stm32_pinctrl_get_af(struct udevice *dev, unsigned int offset) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| u32 af; |
| u32 alt_shift = (offset % 8) * 4; |
| u32 alt_index = offset / 8; |
| |
| af = (readl(®s->afr[alt_index]) & |
| GENMASK(alt_shift + 3, alt_shift)) >> alt_shift; |
| |
| return af; |
| } |
| |
| static int stm32_pinctrl_get_pins_count(struct udevice *dev) |
| { |
| struct stm32_pinctrl_priv *priv = dev_get_priv(dev); |
| struct gpio_dev_priv *uc_priv; |
| struct stm32_gpio_bank *gpio_bank; |
| |
| /* |
| * if get_pins_count has already been executed once on this |
| * pin-controller, no need to run it again |
| */ |
| if (priv->pinctrl_ngpios) |
| return priv->pinctrl_ngpios; |
| |
| /* |
| * walk through all banks to retrieve the pin-controller |
| * pins number |
| */ |
| list_for_each_entry(gpio_bank, &priv->gpio_dev, list) { |
| uc_priv = dev_get_uclass_priv(gpio_bank->gpio_dev); |
| |
| priv->pinctrl_ngpios += uc_priv->gpio_count; |
| } |
| |
| return priv->pinctrl_ngpios; |
| } |
| |
| static struct udevice *stm32_pinctrl_get_gpio_dev(struct udevice *dev, |
| unsigned int selector) |
| { |
| struct stm32_pinctrl_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_bank *gpio_bank; |
| struct gpio_dev_priv *uc_priv; |
| int first_pin = 0; |
| |
| /* look up for the bank which owns the requested pin */ |
| list_for_each_entry(gpio_bank, &priv->gpio_dev, list) { |
| uc_priv = dev_get_uclass_priv(gpio_bank->gpio_dev); |
| |
| if (selector < (first_pin + uc_priv->gpio_count)) |
| /* we found the bank */ |
| return gpio_bank->gpio_dev; |
| |
| first_pin += uc_priv->gpio_count; |
| } |
| |
| return NULL; |
| } |
| |
| static const char *stm32_pinctrl_get_pin_name(struct udevice *dev, |
| unsigned int selector) |
| { |
| struct gpio_dev_priv *uc_priv; |
| struct udevice *gpio_dev; |
| |
| /* look up for the bank which owns the requested pin */ |
| gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector); |
| if (!gpio_dev) { |
| snprintf(pin_name, PINNAME_SIZE, "Error"); |
| } else { |
| uc_priv = dev_get_uclass_priv(gpio_dev); |
| |
| snprintf(pin_name, PINNAME_SIZE, "%s%d", |
| uc_priv->bank_name, |
| selector % MAX_PIN_PER_BANK); |
| } |
| |
| return pin_name; |
| } |
| |
| static int stm32_pinctrl_get_pin_muxing(struct udevice *dev, |
| unsigned int selector, |
| char *buf, |
| int size) |
| { |
| struct udevice *gpio_dev; |
| const char *label; |
| int gpio_pin; |
| int mode; |
| int af_num; |
| |
| /* look up for the bank which owns the requested pin */ |
| gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector); |
| |
| if (!gpio_dev) |
| return -ENODEV; |
| |
| /* translate pin-controller pin number to gpio pin number */ |
| gpio_pin = selector % MAX_PIN_PER_BANK; |
| |
| mode = gpio_get_raw_function(gpio_dev, gpio_pin, &label); |
| |
| dev_dbg(dev, "selector = %d gpio_pin = %d mode = %d\n", |
| selector, gpio_pin, mode); |
| |
| switch (mode) { |
| case GPIOF_UNKNOWN: |
| /* should never happen */ |
| return -EINVAL; |
| case GPIOF_UNUSED: |
| snprintf(buf, size, "%s", pinmux_mode[mode]); |
| break; |
| case GPIOF_FUNC: |
| af_num = stm32_pinctrl_get_af(gpio_dev, gpio_pin); |
| snprintf(buf, size, "%s %d", pinmux_mode[mode], af_num); |
| break; |
| case GPIOF_OUTPUT: |
| case GPIOF_INPUT: |
| snprintf(buf, size, "%s %s", |
| pinmux_mode[mode], label ? label : ""); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int stm32_pinctrl_probe(struct udevice *dev) |
| { |
| struct stm32_pinctrl_priv *priv = dev_get_priv(dev); |
| struct udevice *gpio_dev; |
| struct udevice *child; |
| struct stm32_gpio_bank *gpio_bank; |
| int ret; |
| |
| INIT_LIST_HEAD(&priv->gpio_dev); |
| |
| /* |
| * parse pin-controller sub-nodes (ie gpio bank nodes) and fill |
| * a list with all gpio device reference which belongs to the |
| * current pin-controller. This list is used to find pin_name and |
| * pin muxing |
| */ |
| list_for_each_entry(child, &dev->child_head, sibling_node) { |
| ret = uclass_get_device_by_name(UCLASS_GPIO, child->name, |
| &gpio_dev); |
| if (ret < 0) |
| continue; |
| |
| gpio_bank = malloc(sizeof(*gpio_bank)); |
| if (!gpio_bank) { |
| dev_err(dev, "Not enough memory\n"); |
| return -ENOMEM; |
| } |
| |
| gpio_bank->gpio_dev = gpio_dev; |
| list_add_tail(&gpio_bank->list, &priv->gpio_dev); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static int stm32_gpio_config(struct gpio_desc *desc, |
| const struct stm32_gpio_ctl *ctl) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(desc->dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| u32 index; |
| |
| if (!ctl || ctl->af > 15 || ctl->mode > 3 || ctl->otype > 1 || |
| ctl->pupd > 2 || ctl->speed > 3) |
| return -EINVAL; |
| |
| index = (desc->offset & 0x07) * 4; |
| clrsetbits_le32(®s->afr[desc->offset >> 3], AFR_MASK << index, |
| ctl->af << index); |
| |
| index = desc->offset * 2; |
| clrsetbits_le32(®s->moder, MODE_BITS_MASK << index, |
| ctl->mode << index); |
| clrsetbits_le32(®s->ospeedr, OSPEED_MASK << index, |
| ctl->speed << index); |
| clrsetbits_le32(®s->pupdr, PUPD_MASK << index, ctl->pupd << index); |
| |
| index = desc->offset; |
| clrsetbits_le32(®s->otyper, OTYPE_MSK << index, ctl->otype << index); |
| |
| return 0; |
| } |
| |
| static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc, u32 port_pin) |
| { |
| gpio_dsc->port = (port_pin & 0x1F000) >> 12; |
| gpio_dsc->pin = (port_pin & 0x0F00) >> 8; |
| debug("%s: GPIO:port= %d, pin= %d\n", __func__, gpio_dsc->port, |
| gpio_dsc->pin); |
| |
| return 0; |
| } |
| |
| static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, int node) |
| { |
| gpio_fn &= 0x00FF; |
| gpio_ctl->af = 0; |
| |
| switch (gpio_fn) { |
| case 0: |
| gpio_ctl->mode = STM32_GPIO_MODE_IN; |
| break; |
| case 1 ... 16: |
| gpio_ctl->mode = STM32_GPIO_MODE_AF; |
| gpio_ctl->af = gpio_fn - 1; |
| break; |
| case 17: |
| gpio_ctl->mode = STM32_GPIO_MODE_AN; |
| break; |
| default: |
| gpio_ctl->mode = STM32_GPIO_MODE_OUT; |
| break; |
| } |
| |
| gpio_ctl->speed = fdtdec_get_int(gd->fdt_blob, node, "slew-rate", 0); |
| |
| if (fdtdec_get_bool(gd->fdt_blob, node, "drive-open-drain")) |
| gpio_ctl->otype = STM32_GPIO_OTYPE_OD; |
| else |
| gpio_ctl->otype = STM32_GPIO_OTYPE_PP; |
| |
| if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-up")) |
| gpio_ctl->pupd = STM32_GPIO_PUPD_UP; |
| else if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-down")) |
| gpio_ctl->pupd = STM32_GPIO_PUPD_DOWN; |
| else |
| gpio_ctl->pupd = STM32_GPIO_PUPD_NO; |
| |
| debug("%s: gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n", |
| __func__, gpio_fn, gpio_ctl->speed, gpio_ctl->otype, |
| gpio_ctl->pupd); |
| |
| return 0; |
| } |
| |
| static int stm32_pinctrl_config(int offset) |
| { |
| u32 pin_mux[MAX_PINS_ONE_IP]; |
| int rv, len; |
| |
| /* |
| * check for "pinmux" property in each subnode (e.g. pins1 and pins2 for |
| * usart1) of pin controller phandle "pinctrl-0" |
| * */ |
| fdt_for_each_subnode(offset, gd->fdt_blob, offset) { |
| struct stm32_gpio_dsc gpio_dsc; |
| struct stm32_gpio_ctl gpio_ctl; |
| int i; |
| |
| len = fdtdec_get_int_array_count(gd->fdt_blob, offset, |
| "pinmux", pin_mux, |
| ARRAY_SIZE(pin_mux)); |
| debug("%s: no of pinmux entries= %d\n", __func__, len); |
| if (len < 0) |
| return -EINVAL; |
| for (i = 0; i < len; i++) { |
| struct gpio_desc desc; |
| |
| debug("%s: pinmux = %x\n", __func__, *(pin_mux + i)); |
| prep_gpio_dsc(&gpio_dsc, *(pin_mux + i)); |
| prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), offset); |
| rv = uclass_get_device_by_seq(UCLASS_GPIO, |
| gpio_dsc.port, |
| &desc.dev); |
| if (rv) |
| return rv; |
| desc.offset = gpio_dsc.pin; |
| rv = stm32_gpio_config(&desc, &gpio_ctl); |
| debug("%s: rv = %d\n\n", __func__, rv); |
| if (rv) |
| return rv; |
| } |
| } |
| |
| return 0; |
| } |
| |
| #if CONFIG_IS_ENABLED(PINCTRL_FULL) |
| static int stm32_pinctrl_set_state(struct udevice *dev, struct udevice *config) |
| { |
| return stm32_pinctrl_config(dev_of_offset(config)); |
| } |
| #else /* PINCTRL_FULL */ |
| static int stm32_pinctrl_set_state_simple(struct udevice *dev, |
| struct udevice *periph) |
| { |
| const void *fdt = gd->fdt_blob; |
| const fdt32_t *list; |
| uint32_t phandle; |
| int config_node; |
| int size, i, ret; |
| |
| list = fdt_getprop(fdt, dev_of_offset(periph), "pinctrl-0", &size); |
| if (!list) |
| return -EINVAL; |
| |
| debug("%s: periph->name = %s\n", __func__, periph->name); |
| |
| size /= sizeof(*list); |
| for (i = 0; i < size; i++) { |
| phandle = fdt32_to_cpu(*list++); |
| |
| config_node = fdt_node_offset_by_phandle(fdt, phandle); |
| if (config_node < 0) { |
| pr_err("prop pinctrl-0 index %d invalid phandle\n", i); |
| return -EINVAL; |
| } |
| |
| ret = stm32_pinctrl_config(config_node); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| #endif /* PINCTRL_FULL */ |
| |
| static struct pinctrl_ops stm32_pinctrl_ops = { |
| #if CONFIG_IS_ENABLED(PINCTRL_FULL) |
| .set_state = stm32_pinctrl_set_state, |
| #else /* PINCTRL_FULL */ |
| .set_state_simple = stm32_pinctrl_set_state_simple, |
| #endif /* PINCTRL_FULL */ |
| #ifndef CONFIG_SPL_BUILD |
| .get_pin_name = stm32_pinctrl_get_pin_name, |
| .get_pins_count = stm32_pinctrl_get_pins_count, |
| .get_pin_muxing = stm32_pinctrl_get_pin_muxing, |
| #endif |
| }; |
| |
| static const struct udevice_id stm32_pinctrl_ids[] = { |
| { .compatible = "st,stm32f429-pinctrl" }, |
| { .compatible = "st,stm32f469-pinctrl" }, |
| { .compatible = "st,stm32f746-pinctrl" }, |
| { .compatible = "st,stm32h743-pinctrl" }, |
| { .compatible = "st,stm32mp157-pinctrl" }, |
| { .compatible = "st,stm32mp157-z-pinctrl" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(pinctrl_stm32) = { |
| .name = "pinctrl_stm32", |
| .id = UCLASS_PINCTRL, |
| .of_match = stm32_pinctrl_ids, |
| .ops = &stm32_pinctrl_ops, |
| .bind = dm_scan_fdt_dev, |
| #ifndef CONFIG_SPL_BUILD |
| .probe = stm32_pinctrl_probe, |
| .priv_auto_alloc_size = sizeof(struct stm32_pinctrl_priv), |
| #endif |
| }; |