blob: b5fee06b5b01e3ea1ce80e83db948fbcb6eb0f29 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
*
* FSL DCU Framebuffer driver
*/
#include <asm/global_data.h>
#include <asm/io.h>
#include <common.h>
#include <fsl_dcu_fb.h>
#include <i2c.h>
#include "../common/i2c_mux.h"
#include "div64.h"
#include "../common/diu_ch7301.h"
#include "ls1021aqds_qixis.h"
DECLARE_GLOBAL_DATA_PTR;
unsigned int dcu_set_pixel_clock(unsigned int pixclock)
{
unsigned long long div;
div = (unsigned long long)(gd->bus_clk / 1000);
div *= (unsigned long long)pixclock;
do_div(div, 1000000000);
return div;
}
int platform_dcu_init(struct fb_info *fbinfo,
unsigned int xres,
unsigned int yres,
const char *port,
struct fb_videomode *dcu_fb_videomode)
{
const char *name;
unsigned int pixel_format;
int ret;
u8 ch;
/* Mux I2C3+I2C4 as HSYNC+VSYNC */
#if CONFIG_IS_ENABLED(DM_I2C)
struct udevice *dev;
/* QIXIS device mount on I2C1 bus*/
ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_QIXIS_ADDR,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
0);
return ret;
}
ret = dm_i2c_read(dev, QIXIS_DCU_BRDCFG5, &ch, 1);
if (ret) {
printf("Error: failed to read I2C @%02x\n",
CONFIG_SYS_I2C_QIXIS_ADDR);
return ret;
}
ch &= 0x1F;
ch |= 0xA0;
ret = dm_i2c_write(dev, QIXIS_DCU_BRDCFG5, &ch, 1);
#else
ret = i2c_read(CONFIG_SYS_I2C_QIXIS_ADDR, QIXIS_DCU_BRDCFG5,
1, &ch, 1);
if (ret) {
printf("Error: failed to read I2C @%02x\n",
CONFIG_SYS_I2C_QIXIS_ADDR);
return ret;
}
ch &= 0x1F;
ch |= 0xA0;
ret = i2c_write(CONFIG_SYS_I2C_QIXIS_ADDR, QIXIS_DCU_BRDCFG5,
1, &ch, 1);
#endif
if (ret) {
printf("Error: failed to write I2C @%02x\n",
CONFIG_SYS_I2C_QIXIS_ADDR);
return ret;
}
if (strncmp(port, "hdmi", 4) == 0) {
unsigned long pixval;
name = "HDMI";
pixval = 1000000000 / dcu_fb_videomode->pixclock;
pixval *= 1000;
#if !CONFIG_IS_ENABLED(DM_I2C)
i2c_set_bus_num(CONFIG_SYS_I2C_DVI_BUS_NUM);
#endif
select_i2c_ch_pca9547(I2C_MUX_CH_CH7301,
CONFIG_SYS_I2C_DVI_BUS_NUM);
diu_set_dvi_encoder(pixval);
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT,
CONFIG_SYS_I2C_DVI_BUS_NUM);
} else {
return 0;
}
printf("DCU: Switching to %s monitor @ %ux%u\n", name, xres, yres);
pixel_format = 32;
fsl_dcu_init(fbinfo, xres, yres, pixel_format);
return 0;
}