treewide: replace with error() with pr_err()
U-Boot widely uses error() as a bit noisier variant of printf().
This macro causes name conflict with the following line in
include/linux/compiler-gcc.h:
# define __compiletime_error(message) __attribute__((error(message)))
This prevents us from using __compiletime_error(), and makes it
difficult to fully sync BUILD_BUG macros with Linux. (Notice
Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().)
Let's convert error() into now treewide-available pr_err().
Done with the help of Coccinelle, excluing tools/ directory.
The semantic patch I used is as follows:
// <smpl>
@@@@
-error
+pr_err
(...)
// </smpl>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Re-run Coccinelle]
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index 913a44a..ae86b69 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -241,7 +241,7 @@
#if defined(CONFIG_DM_ETH) && defined(CONFIG_USB_ETHER)
ret = usb_ether_init();
if (ret) {
- error("USB ether init failed\n");
+ pr_err("USB ether init failed\n");
return ret;
}
#endif
diff --git a/arch/arm/mach-omap2/utils.c b/arch/arm/mach-omap2/utils.c
index 0b0bf18..f2fafae 100644
--- a/arch/arm/mach-omap2/utils.c
+++ b/arch/arm/mach-omap2/utils.c
@@ -87,13 +87,13 @@
dev_desc = blk_get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV);
if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) {
- error("invalid mmc device\n");
+ pr_err("invalid mmc device\n");
return 0;
}
res = part_get_info_by_name(dev_desc, part, &info);
if (res < 0) {
- error("cannot find partition: '%s'\n", part);
+ pr_err("cannot find partition: '%s'\n", part);
return 0;
}
diff --git a/arch/arm/mach-rockchip/rk3188-board-spl.c b/arch/arm/mach-rockchip/rk3188-board-spl.c
index d3866bf..406207e 100644
--- a/arch/arm/mach-rockchip/rk3188-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3188-board-spl.c
@@ -151,7 +151,7 @@
*/
pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);
if (IS_ERR(pmu))
- error("pmu syscon returned %ld\n", PTR_ERR(pmu));
+ pr_err("pmu syscon returned %ld\n", PTR_ERR(pmu));
SAVE_SP_ADDR = readl(&pmu->sys_reg[2]);
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
diff --git a/arch/arm/mach-rockchip/rk3188-board.c b/arch/arm/mach-rockchip/rk3188-board.c
index 622e046..96859a5 100644
--- a/arch/arm/mach-rockchip/rk3188-board.c
+++ b/arch/arm/mach-rockchip/rk3188-board.c
@@ -26,7 +26,7 @@
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
if (IS_ERR(grf)) {
- error("grf syscon returned %ld\n", PTR_ERR(grf));
+ pr_err("grf syscon returned %ld\n", PTR_ERR(grf));
} else {
/* enable noc remap to mimic legacy loaders */
rk_clrsetreg(&grf->soc_con0,
diff --git a/arch/arm/mach-rockchip/rk3368-board-spl.c b/arch/arm/mach-rockchip/rk3368-board-spl.c
index cabf344..72d2c97 100644
--- a/arch/arm/mach-rockchip/rk3368-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3368-board-spl.c
@@ -38,13 +38,13 @@
/* Set up our preloader console */
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
if (ret) {
- error("%s: pinctrl init failed: %d\n", __func__, ret);
+ pr_err("%s: pinctrl init failed: %d\n", __func__, ret);
hang();
}
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART0);
if (ret) {
- error("%s: failed to set up console UART\n", __func__);
+ pr_err("%s: failed to set up console UART\n", __func__);
hang();
}
diff --git a/arch/arm/mach-socfpga/reset_manager_arria10.c b/arch/arm/mach-socfpga/reset_manager_arria10.c
index 66f1ec2..ae16897 100644
--- a/arch/arm/mach-socfpga/reset_manager_arria10.c
+++ b/arch/arm/mach-socfpga/reset_manager_arria10.c
@@ -174,7 +174,7 @@
emacmask = ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK;
break;
default:
- error("emac base address unexpected! %lx", emacbase);
+ pr_err("emac base address unexpected! %lx", emacbase);
hang();
break;
}
diff --git a/arch/arm/mach-tegra/ivc.c b/arch/arm/mach-tegra/ivc.c
index cf6626f..dec7d90 100644
--- a/arch/arm/mach-tegra/ivc.c
+++ b/arch/arm/mach-tegra/ivc.c
@@ -493,7 +493,7 @@
(TEGRA_IVC_ALIGN - 1));
if ((uint64_t)nframes * (uint64_t)frame_size >= 0x100000000) {
- error("tegra_ivc: nframes * frame_size overflows\n");
+ pr_err("tegra_ivc: nframes * frame_size overflows\n");
return -EINVAL;
}
@@ -503,12 +503,12 @@
*/
if ((qbase1 & (TEGRA_IVC_ALIGN - 1)) ||
(qbase2 & (TEGRA_IVC_ALIGN - 1))) {
- error("tegra_ivc: channel start not aligned\n");
+ pr_err("tegra_ivc: channel start not aligned\n");
return -EINVAL;
}
if (frame_size & (TEGRA_IVC_ALIGN - 1)) {
- error("tegra_ivc: frame size not adequately aligned\n");
+ pr_err("tegra_ivc: frame size not adequately aligned\n");
return -EINVAL;
}
@@ -521,7 +521,7 @@
}
if (ret) {
- error("tegra_ivc: queue regions overlap\n");
+ pr_err("tegra_ivc: queue regions overlap\n");
return ret;
}
diff --git a/arch/arm/mach-tegra/tegra124/xusb-padctl.c b/arch/arm/mach-tegra/tegra124/xusb-padctl.c
index d326a6a..bfc0ab8 100644
--- a/arch/arm/mach-tegra/tegra124/xusb-padctl.c
+++ b/arch/arm/mach-tegra/tegra124/xusb-padctl.c
@@ -137,7 +137,7 @@
u32 value;
if (padctl->enable == 0) {
- error("unbalanced enable/disable");
+ pr_err("unbalanced enable/disable");
return 0;
}
diff --git a/arch/arm/mach-tegra/tegra186/nvtboot_mem.c b/arch/arm/mach-tegra/tegra186/nvtboot_mem.c
index 966cf9f..5224ef6 100644
--- a/arch/arm/mach-tegra/tegra186/nvtboot_mem.c
+++ b/arch/arm/mach-tegra/tegra186/nvtboot_mem.c
@@ -45,12 +45,12 @@
node = fdt_path_offset(nvtboot_blob, "/memory");
if (node < 0) {
- error("Can't find /memory node in nvtboot DTB");
+ pr_err("Can't find /memory node in nvtboot DTB");
hang();
}
prop = fdt_getprop(nvtboot_blob, node, "reg", &len);
if (!prop) {
- error("Can't find /memory/reg property in nvtboot DTB");
+ pr_err("Can't find /memory/reg property in nvtboot DTB");
hang();
}
diff --git a/arch/arm/mach-tegra/tegra20/clock.c b/arch/arm/mach-tegra/tegra20/clock.c
index ec04cf5..81fb1d8 100644
--- a/arch/arm/mach-tegra/tegra20/clock.c
+++ b/arch/arm/mach-tegra/tegra20/clock.c
@@ -667,7 +667,7 @@
} while (--timeout);
if (timeout == 0) {
- error("timeout waiting for PLLE to become ready");
+ pr_err("timeout waiting for PLLE to become ready");
return -ETIMEDOUT;
}
@@ -697,7 +697,7 @@
if ((value & PLLE_MISC_PLL_READY) == 0) {
err = tegra_plle_train();
if (err < 0) {
- error("failed to train PLLE: %d", err);
+ pr_err("failed to train PLLE: %d", err);
return err;
}
}
@@ -726,7 +726,7 @@
} while (--timeout);
if (timeout == 0) {
- error("timeout waiting for PLLE to lock");
+ pr_err("timeout waiting for PLLE to lock");
return -ETIMEDOUT;
}
diff --git a/arch/arm/mach-tegra/tegra210/xusb-padctl.c b/arch/arm/mach-tegra/tegra210/xusb-padctl.c
index bf85e07..a3e3e37 100644
--- a/arch/arm/mach-tegra/tegra210/xusb-padctl.c
+++ b/arch/arm/mach-tegra/tegra210/xusb-padctl.c
@@ -125,7 +125,7 @@
u32 value;
if (padctl->enable == 0) {
- error("unbalanced enable/disable");
+ pr_err("unbalanced enable/disable");
return 0;
}
diff --git a/arch/arm/mach-tegra/tegra30/clock.c b/arch/arm/mach-tegra/tegra30/clock.c
index 4fd8b8a..282f34f 100644
--- a/arch/arm/mach-tegra/tegra30/clock.c
+++ b/arch/arm/mach-tegra/tegra30/clock.c
@@ -696,7 +696,7 @@
} while (--timeout);
if (timeout == 0) {
- error("timeout waiting for PLLE to become ready");
+ pr_err("timeout waiting for PLLE to become ready");
return -ETIMEDOUT;
}
@@ -726,7 +726,7 @@
if ((value & PLLE_MISC_PLL_READY) == 0) {
err = tegra_plle_train();
if (err < 0) {
- error("failed to train PLLE: %d", err);
+ pr_err("failed to train PLLE: %d", err);
return err;
}
}
@@ -772,7 +772,7 @@
} while (--timeout);
if (timeout == 0) {
- error("timeout waiting for PLLE to lock");
+ pr_err("timeout waiting for PLLE to lock");
return -ETIMEDOUT;
}
diff --git a/arch/arm/mach-tegra/xusb-padctl-common.c b/arch/arm/mach-tegra/xusb-padctl-common.c
index abc18c0..c8a468a 100644
--- a/arch/arm/mach-tegra/xusb-padctl-common.c
+++ b/arch/arm/mach-tegra/xusb-padctl-common.c
@@ -84,7 +84,7 @@
len = ofnode_read_string_count(node, "nvidia,lanes");
if (len < 0) {
- error("failed to parse \"nvidia,lanes\" property");
+ pr_err("failed to parse \"nvidia,lanes\" property");
return -EINVAL;
}
@@ -94,7 +94,7 @@
ret = ofnode_read_string_index(node, "nvidia,lanes", i,
&group->pins[i]);
if (ret) {
- error("failed to read string from \"nvidia,lanes\" property");
+ pr_err("failed to read string from \"nvidia,lanes\" property");
return -EINVAL;
}
}
@@ -104,7 +104,7 @@
ret = ofnode_read_string_index(node, "nvidia,function", 0,
&group->func);
if (ret) {
- error("failed to parse \"nvidia,func\" property");
+ pr_err("failed to parse \"nvidia,func\" property");
return -EINVAL;
}
@@ -157,14 +157,14 @@
lane = tegra_xusb_padctl_find_lane(padctl, group->pins[i]);
if (!lane) {
- error("no lane for pin %s", group->pins[i]);
+ pr_err("no lane for pin %s", group->pins[i]);
continue;
}
func = tegra_xusb_padctl_lane_find_function(padctl, lane,
group->func);
if (func < 0) {
- error("function %s invalid for lane %s: %d",
+ pr_err("function %s invalid for lane %s: %d",
group->func, lane->name, func);
continue;
}
@@ -206,7 +206,7 @@
err = tegra_xusb_padctl_group_apply(padctl, group);
if (err < 0) {
- error("failed to apply group %s: %d",
+ pr_err("failed to apply group %s: %d",
group->name, err);
continue;
}
@@ -232,7 +232,7 @@
err = tegra_xusb_padctl_group_parse_dt(padctl, group, subnode);
if (err < 0) {
- error("failed to parse group %s", group->name);
+ pr_err("failed to parse group %s", group->name);
return err;
}
@@ -250,7 +250,7 @@
err = ofnode_read_resource(node, 0, &padctl->regs);
if (err < 0) {
- error("registers not found");
+ pr_err("registers not found");
return err;
}
@@ -261,7 +261,7 @@
err = tegra_xusb_padctl_config_parse_dt(padctl, config,
subnode);
if (err < 0) {
- error("failed to parse entry %s: %d",
+ pr_err("failed to parse entry %s: %d",
config->name, err);
continue;
}
@@ -289,7 +289,7 @@
err = tegra_xusb_padctl_parse_dt(&padctl, nodes[i]);
if (err < 0) {
- error("failed to parse DT: %d", err);
+ pr_err("failed to parse DT: %d", err);
continue;
}
@@ -298,7 +298,7 @@
err = tegra_xusb_padctl_config_apply(&padctl, &padctl.config);
if (err < 0) {
- error("failed to apply pinmux: %d", err);
+ pr_err("failed to apply pinmux: %d", err);
continue;
}
diff --git a/arch/x86/cpu/tangier/sdram.c b/arch/x86/cpu/tangier/sdram.c
index 5743077..eae8d78 100644
--- a/arch/x86/cpu/tangier/sdram.c
+++ b/arch/x86/cpu/tangier/sdram.c
@@ -39,7 +39,7 @@
chksum += *pos++;
if (chksum)
- error("sfi: Invalid checksum\n");
+ pr_err("sfi: Invalid checksum\n");
/* Checksum is OK if zero */
return chksum ? -EILSEQ : 0;
@@ -76,7 +76,7 @@
/* Find SYST table */
sb = sfi_get_table_by_sig(SFI_BASE_ADDR, SFI_SIG_SYST);
if (!sb) {
- error("sfi: failed to locate SYST table\n");
+ pr_err("sfi: failed to locate SYST table\n");
return NULL;
}
@@ -90,7 +90,7 @@
return (struct sfi_table_simple *)sbh;
}
- error("sfi: failed to locate SFI MMAP table\n");
+ pr_err("sfi: failed to locate SFI MMAP table\n");
return NULL;
}
diff --git a/board/nvidia/jetson-tk1/jetson-tk1.c b/board/nvidia/jetson-tk1/jetson-tk1.c
index bd08a2e..c20da29 100644
--- a/board/nvidia/jetson-tk1/jetson-tk1.c
+++ b/board/nvidia/jetson-tk1/jetson-tk1.c
@@ -49,7 +49,7 @@
err = pmic_clrsetbits(pmic, AS3722_SD_CONTROL, 0, 1 << sd);
if (err) {
- error("failed to update SD control register: %d", err);
+ pr_err("failed to update SD control register: %d", err);
return err;
}
@@ -70,13 +70,13 @@
ret = as3722_sd_enable(dev, 4);
if (ret < 0) {
- error("failed to enable SD4: %d\n", ret);
+ pr_err("failed to enable SD4: %d\n", ret);
return ret;
}
ret = as3722_sd_set_voltage(dev, 4, 0x24);
if (ret < 0) {
- error("failed to set SD4 voltage: %d\n", ret);
+ pr_err("failed to set SD4 voltage: %d\n", ret);
return ret;
}
diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c
index ae2a6e6..0d17f30 100644
--- a/board/samsung/common/exynos5-dt.c
+++ b/board/samsung/common/exynos5-dt.c
@@ -161,7 +161,7 @@
samsung_get_base_usb3_phy();
if (!phy) {
- error("usb3 phy not supported");
+ pr_err("usb3 phy not supported");
return -ENODEV;
}
diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
index 4157349..eba25b7 100644
--- a/board/samsung/common/misc.c
+++ b/board/samsung/common/misc.c
@@ -457,7 +457,7 @@
addr = panel_info.logo_addr;
if (!addr) {
- error("There is no logo data.");
+ pr_err("There is no logo data.");
return;
}
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index d0247ac..debc4c5 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -102,7 +102,7 @@
ret = s5p_mmc_init(0, 4);
if (ret)
- error("MMC: Failed to init MMC:0.\n");
+ pr_err("MMC: Failed to init MMC:0.\n");
/*
* SD card (T_FLASH) detect and init
@@ -127,7 +127,7 @@
ret_sd = s5p_mmc_init(2, 4);
if (ret_sd)
- error("MMC: Failed to init SD card (MMC:2).\n");
+ pr_err("MMC: Failed to init SD card (MMC:2).\n");
}
return ret & ret_sd;
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index e40a2f6..0df96c1 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -429,7 +429,7 @@
};
if (regulator_list_autoset(mmc_regulators, NULL, true))
- error("Unable to init all mmc regulators");
+ pr_err("Unable to init all mmc regulators");
return 0;
}
@@ -442,7 +442,7 @@
ret = regulator_get_by_platname("VDD_UOTG_3.0V", &dev);
if (ret) {
- error("Regulator get error: %d", ret);
+ pr_err("Regulator get error: %d", ret);
return ret;
}
@@ -487,25 +487,25 @@
ret = regulator_get_by_platname("VCC_P3V3_2.85V", &dev);
if (ret) {
- error("Regulator get error: %d", ret);
+ pr_err("Regulator get error: %d", ret);
return ret;
}
ret = regulator_set_enable(dev, true);
if (ret) {
- error("Regulator %s enable setting error: %d", dev->name, ret);
+ pr_err("Regulator %s enable setting error: %d", dev->name, ret);
return ret;
}
ret = regulator_set_value(dev, 750000);
if (ret) {
- error("Regulator %s value setting error: %d", dev->name, ret);
+ pr_err("Regulator %s value setting error: %d", dev->name, ret);
return ret;
}
ret = regulator_set_value(dev, 3300000);
if (ret) {
- error("Regulator %s value setting error: %d", dev->name, ret);
+ pr_err("Regulator %s value setting error: %d", dev->name, ret);
return ret;
}
#endif
diff --git a/cmd/fastboot.c b/cmd/fastboot.c
index 488822a..8adcca5 100644
--- a/cmd/fastboot.c
+++ b/cmd/fastboot.c
@@ -27,7 +27,7 @@
ret = board_usb_init(controller_index, USB_INIT_DEVICE);
if (ret) {
- error("USB init failed: %d", ret);
+ pr_err("USB init failed: %d", ret);
return CMD_RET_FAILURE;
}
diff --git a/cmd/nvedit.c b/cmd/nvedit.c
index 4033d90..228e904 100644
--- a/cmd/nvedit.c
+++ b/cmd/nvedit.c
@@ -927,7 +927,7 @@
H_MATCH_KEY | H_MATCH_IDENT,
&ptr, size, argc, argv);
if (len < 0) {
- error("Cannot export environment: errno = %d\n", errno);
+ pr_err("Cannot export environment: errno = %d\n", errno);
return 1;
}
sprintf(buf, "%zX", (size_t)len);
@@ -947,7 +947,7 @@
H_MATCH_KEY | H_MATCH_IDENT,
&res, ENV_SIZE, argc, argv);
if (len < 0) {
- error("Cannot export environment: errno = %d\n", errno);
+ pr_err("Cannot export environment: errno = %d\n", errno);
return 1;
}
@@ -1082,7 +1082,7 @@
if (himport_r(&env_htab, ptr, size, sep, del ? 0 : H_NOCLEAR,
crlf_is_lf, 0, NULL) == 0) {
- error("Environment import failed: errno = %d\n", errno);
+ pr_err("Environment import failed: errno = %d\n", errno);
return 1;
}
gd->flags |= GD_FLG_ENV_READY;
diff --git a/cmd/regulator.c b/cmd/regulator.c
index 2ef5bc9..b605255 100644
--- a/cmd/regulator.c
+++ b/cmd/regulator.c
@@ -71,7 +71,7 @@
*uc_pdata = dev_get_uclass_platdata(*devp);
if (!*uc_pdata) {
- error("Regulator: %s - missing platform data!", currdev->name);
+ pr_err("Regulator: %s - missing platform data!", currdev->name);
return CMD_RET_FAILURE;
}
diff --git a/cmd/thordown.c b/cmd/thordown.c
index 436b7f5..1bb5fc2 100644
--- a/cmd/thordown.c
+++ b/cmd/thordown.c
@@ -33,7 +33,7 @@
int controller_index = simple_strtoul(usb_controller, NULL, 0);
ret = board_usb_init(controller_index, USB_INIT_DEVICE);
if (ret) {
- error("USB init failed: %d", ret);
+ pr_err("USB init failed: %d", ret);
ret = CMD_RET_FAILURE;
goto exit;
}
@@ -42,14 +42,14 @@
ret = thor_init();
if (ret) {
- error("THOR DOWNLOAD failed: %d", ret);
+ pr_err("THOR DOWNLOAD failed: %d", ret);
ret = CMD_RET_FAILURE;
goto exit;
}
ret = thor_handle();
if (ret) {
- error("THOR failed: %d", ret);
+ pr_err("THOR failed: %d", ret);
ret = CMD_RET_FAILURE;
goto exit;
}
diff --git a/cmd/tpm_test.c b/cmd/tpm_test.c
index 3306405..37ad2ff 100644
--- a/cmd/tpm_test.c
+++ b/cmd/tpm_test.c
@@ -303,12 +303,12 @@
index_0 += 1;
if (tpm_nv_write_value(INDEX0, (uint8_t *)&index_0, sizeof(index_0) !=
TPM_SUCCESS)) {
- error("\tcould not write index 0\n");
+ pr_err("\tcould not write index 0\n");
}
tpm_nv_write_value_lock(INDEX0);
if (tpm_nv_write_value(INDEX0, (uint8_t *)&index_0, sizeof(index_0)) ==
TPM_SUCCESS)
- error("\tindex 0 is not locked\n");
+ pr_err("\tindex 0 is not locked\n");
printf("\tdone\n");
return 0;
@@ -471,7 +471,7 @@
case TPM_MAXNVWRITES:
assert(i >= TPM_MAX_NV_WRITES_NOOWNER);
default:
- error("\tunexpected error code %d (0x%x)\n",
+ pr_err("\tunexpected error code %d (0x%x)\n",
result, result);
}
}
diff --git a/cmd/usb_gadget_sdp.c b/cmd/usb_gadget_sdp.c
index b1d8b28..ae4d73c 100644
--- a/cmd/usb_gadget_sdp.c
+++ b/cmd/usb_gadget_sdp.c
@@ -28,13 +28,13 @@
ret = sdp_init(controller_index);
if (ret) {
- error("SDP init failed: %d", ret);
+ pr_err("SDP init failed: %d", ret);
goto exit;
}
/* This command typically does not return but jumps to an image */
sdp_handle(controller_index);
- error("SDP ended");
+ pr_err("SDP ended");
exit:
g_dnl_unregister();
diff --git a/cmd/usb_mass_storage.c b/cmd/usb_mass_storage.c
index 3353f95..cfeecb7 100644
--- a/cmd/usb_mass_storage.c
+++ b/cmd/usb_mass_storage.c
@@ -162,21 +162,21 @@
controller_index = (unsigned int)(simple_strtoul(
usb_controller, NULL, 0));
if (board_usb_init(controller_index, USB_INIT_DEVICE)) {
- error("Couldn't init USB controller.");
+ pr_err("Couldn't init USB controller.");
rc = CMD_RET_FAILURE;
goto cleanup_ums_init;
}
rc = fsg_init(ums, ums_count);
if (rc) {
- error("fsg_init failed");
+ pr_err("fsg_init failed");
rc = CMD_RET_FAILURE;
goto cleanup_board;
}
rc = g_dnl_register("usb_dnl_ums");
if (rc) {
- error("g_dnl_register failed");
+ pr_err("g_dnl_register failed");
rc = CMD_RET_FAILURE;
goto cleanup_board;
}
diff --git a/common/dfu.c b/common/dfu.c
index 546a1ab..07dff31 100644
--- a/common/dfu.c
+++ b/common/dfu.c
@@ -26,13 +26,13 @@
ret = board_usb_init(usbctrl_index, USB_INIT_DEVICE);
if (ret) {
- error("board usb init failed\n");
+ pr_err("board usb init failed\n");
return CMD_RET_FAILURE;
}
g_dnl_clear_detach();
ret = g_dnl_register(usb_dnl_gadget);
if (ret) {
- error("g_dnl_register failed");
+ pr_err("g_dnl_register failed");
return CMD_RET_FAILURE;
}
@@ -75,7 +75,7 @@
ret = dfu_flush(dfu_get_defer_flush(), NULL, 0, 0);
dfu_set_defer_flush(NULL);
if (ret) {
- error("Deferred dfu_flush() failed!");
+ pr_err("Deferred dfu_flush() failed!");
goto exit;
}
}
diff --git a/common/fb_mmc.c b/common/fb_mmc.c
index 26d60b8..cf5b77c 100644
--- a/common/fb_mmc.c
+++ b/common/fb_mmc.c
@@ -84,7 +84,7 @@
blkcnt = lldiv(blkcnt, info->blksz);
if (blkcnt > info->size) {
- error("too large for partition: '%s'\n", part_name);
+ pr_err("too large for partition: '%s'\n", part_name);
fastboot_fail("too large for partition");
return;
}
@@ -93,7 +93,7 @@
blks = blk_dwrite(dev_desc, info->start, blkcnt, buffer);
if (blks != blkcnt) {
- error("failed writing to device %d\n", dev_desc->devnum);
+ pr_err("failed writing to device %d\n", dev_desc->devnum);
fastboot_fail("failed writing to device");
return;
}
@@ -125,7 +125,7 @@
sector_size = info->blksz;
hdr_sectors = DIV_ROUND_UP(sizeof(struct andr_img_hdr), sector_size);
if (hdr_sectors == 0) {
- error("invalid number of boot sectors: 0");
+ pr_err("invalid number of boot sectors: 0");
fastboot_fail("invalid number of boot sectors: 0");
return 0;
}
@@ -133,7 +133,7 @@
/* Read the boot image header */
res = blk_dread(dev_desc, info->start, hdr_sectors, (void *)hdr);
if (res != hdr_sectors) {
- error("cannot read header from boot partition");
+ pr_err("cannot read header from boot partition");
fastboot_fail("cannot read header from boot partition");
return 0;
}
@@ -141,7 +141,7 @@
/* Check boot header magic string */
res = android_image_check_header(hdr);
if (res != 0) {
- error("bad boot image magic");
+ pr_err("bad boot image magic");
fastboot_fail("boot partition not initialized");
return 0;
}
@@ -179,7 +179,7 @@
/* Get boot partition info */
res = part_get_info_by_name(dev_desc, BOOT_PARTITION_NAME, &info);
if (res < 0) {
- error("cannot find boot partition");
+ pr_err("cannot find boot partition");
fastboot_fail("cannot find boot partition");
return -1;
}
@@ -191,14 +191,14 @@
/* Read boot image header */
hdr_sectors = fb_mmc_get_boot_header(dev_desc, &info, hdr);
if (hdr_sectors == 0) {
- error("unable to read boot image header");
+ pr_err("unable to read boot image header");
fastboot_fail("unable to read boot image header");
return -1;
}
/* Check if boot image has second stage in it (we don't support it) */
if (hdr->second_size > 0) {
- error("moving second stage is not supported yet");
+ pr_err("moving second stage is not supported yet");
fastboot_fail("moving second stage is not supported yet");
return -1;
}
@@ -216,7 +216,7 @@
res = blk_dread(dev_desc, ramdisk_sector_start, ramdisk_sectors,
ramdisk_buffer);
if (res != ramdisk_sectors) {
- error("cannot read ramdisk from boot partition");
+ pr_err("cannot read ramdisk from boot partition");
fastboot_fail("cannot read ramdisk from boot partition");
return -1;
}
@@ -225,7 +225,7 @@
hdr->kernel_size = download_bytes;
res = blk_dwrite(dev_desc, info.start, hdr_sectors, (void *)hdr);
if (res == 0) {
- error("cannot writeback boot image header");
+ pr_err("cannot writeback boot image header");
fastboot_fail("cannot write back boot image header");
return -1;
}
@@ -237,7 +237,7 @@
res = blk_dwrite(dev_desc, kernel_sector_start, kernel_sectors,
download_buffer);
if (res == 0) {
- error("cannot write new kernel");
+ pr_err("cannot write new kernel");
fastboot_fail("cannot write new kernel");
return -1;
}
@@ -249,7 +249,7 @@
res = blk_dwrite(dev_desc, ramdisk_sector_start, ramdisk_sectors,
ramdisk_buffer);
if (res == 0) {
- error("cannot write back original ramdisk");
+ pr_err("cannot write back original ramdisk");
fastboot_fail("cannot write back original ramdisk");
return -1;
}
@@ -268,7 +268,7 @@
dev_desc = blk_get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV);
if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) {
- error("invalid mmc device\n");
+ pr_err("invalid mmc device\n");
fastboot_fail("invalid mmc device");
return;
}
@@ -322,7 +322,7 @@
#endif
if (part_get_info_by_name_or_alias(dev_desc, cmd, &info) < 0) {
- error("cannot find partition: '%s'\n", cmd);
+ pr_err("cannot find partition: '%s'\n", cmd);
fastboot_fail("cannot find partition");
return;
}
@@ -360,21 +360,21 @@
struct mmc *mmc = find_mmc_device(CONFIG_FASTBOOT_FLASH_MMC_DEV);
if (mmc == NULL) {
- error("invalid mmc device");
+ pr_err("invalid mmc device");
fastboot_fail("invalid mmc device");
return;
}
dev_desc = blk_get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV);
if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) {
- error("invalid mmc device");
+ pr_err("invalid mmc device");
fastboot_fail("invalid mmc device");
return;
}
ret = part_get_info_by_name_or_alias(dev_desc, cmd, &info);
if (ret < 0) {
- error("cannot find partition: '%s'", cmd);
+ pr_err("cannot find partition: '%s'", cmd);
fastboot_fail("cannot find partition");
return;
}
@@ -393,7 +393,7 @@
blks = blk_derase(dev_desc, blks_start, blks_size);
if (blks != blks_size) {
- error("failed erasing from device %d", dev_desc->devnum);
+ pr_err("failed erasing from device %d", dev_desc->devnum);
fastboot_fail("failed erasing from device");
return;
}
diff --git a/common/fb_nand.c b/common/fb_nand.c
index 3d027d4..aa28046 100644
--- a/common/fb_nand.c
+++ b/common/fb_nand.c
@@ -40,20 +40,20 @@
ret = mtdparts_init();
if (ret) {
- error("Cannot initialize MTD partitions\n");
+ pr_err("Cannot initialize MTD partitions\n");
fastboot_fail("cannot init mtdparts");
return ret;
}
ret = find_dev_and_part(partname, &dev, &pnum, part);
if (ret) {
- error("cannot find partition: '%s'", partname);
+ pr_err("cannot find partition: '%s'", partname);
fastboot_fail("cannot find partition");
return ret;
}
if (dev->id->type != MTD_DEV_TYPE_NAND) {
- error("partition '%s' is not stored on a NAND device",
+ pr_err("partition '%s' is not stored on a NAND device",
partname);
fastboot_fail("not a NAND device");
return -EINVAL;
@@ -154,7 +154,7 @@
ret = fb_nand_lookup(cmd, &mtd, &part);
if (ret) {
- error("invalid NAND device");
+ pr_err("invalid NAND device");
fastboot_fail("invalid NAND device");
return;
}
@@ -209,7 +209,7 @@
ret = fb_nand_lookup(cmd, &mtd, &part);
if (ret) {
- error("invalid NAND device");
+ pr_err("invalid NAND device");
fastboot_fail("invalid NAND device");
return;
}
@@ -220,7 +220,7 @@
ret = _fb_nand_erase(mtd, part);
if (ret) {
- error("failed erasing from device %s", mtd->name);
+ pr_err("failed erasing from device %s", mtd->name);
fastboot_fail("failed erasing from device");
return;
}
diff --git a/common/spl/spl_dfu.c b/common/spl/spl_dfu.c
index 2c97473..05bb210 100644
--- a/common/spl/spl_dfu.c
+++ b/common/spl/spl_dfu.c
@@ -42,13 +42,13 @@
set_default_env(0);
str_env = env_get(dfu_alt_info);
if (!str_env) {
- error("\"dfu_alt_info\" env variable not defined!\n");
+ pr_err("\"dfu_alt_info\" env variable not defined!\n");
return -EINVAL;
}
ret = env_set("dfu_alt_info", str_env);
if (ret) {
- error("unable to set env variable \"dfu_alt_info\"!\n");
+ pr_err("unable to set env variable \"dfu_alt_info\"!\n");
return -EINVAL;
}
diff --git a/common/spl/spl_sdp.c b/common/spl/spl_sdp.c
index 350bcdb..333d518 100644
--- a/common/spl/spl_sdp.c
+++ b/common/spl/spl_sdp.c
@@ -24,13 +24,13 @@
ret = sdp_init(controller_index);
if (ret) {
- error("SDP init failed: %d", ret);
+ pr_err("SDP init failed: %d", ret);
return -ENODEV;
}
/* This command typically does not return but jumps to an image */
sdp_handle(controller_index);
- error("SDP ended");
+ pr_err("SDP ended");
return -EINVAL;
}
diff --git a/common/update.c b/common/update.c
index 974f465..33bffaa 100644
--- a/common/update.c
+++ b/common/update.c
@@ -242,7 +242,7 @@
} else if (interface && devstring) {
update_tftp_dfu = true;
} else {
- error("Interface: %s and devstring: %s not supported!\n",
+ pr_err("Interface: %s and devstring: %s not supported!\n",
interface, devstring);
return -EINVAL;
}
diff --git a/disk/part_efi.c b/disk/part_efi.c
index 208bb14..0abf487 100644
--- a/disk/part_efi.c
+++ b/disk/part_efi.c
@@ -360,7 +360,7 @@
/* Read MBR to backup boot code if it exists */
if (blk_dread(dev_desc, 0, 1, p_mbr) != 1) {
- error("** Can't read from device %d **\n", dev_desc->devnum);
+ pr_err("** Can't read from device %d **\n", dev_desc->devnum);
return -1;
}
@@ -716,7 +716,7 @@
for (i = 0; i < parts; i++) {
if (i == gpt_head->num_partition_entries) {
- error("More partitions than allowed!\n");
+ pr_err("More partitions than allowed!\n");
return -1;
}
@@ -729,7 +729,7 @@
if (strncmp(efi_str, (char *)partitions[i].name,
sizeof(partitions->name))) {
- error("Partition name: %s does not match %s!\n",
+ pr_err("Partition name: %s does not match %s!\n",
efi_str, (char *)partitions[i].name);
return -1;
}
@@ -746,7 +746,7 @@
if ((i == parts - 1) && (partitions[i].size == 0))
continue;
- error("Partition %s size: %llu does not match %llu!\n",
+ pr_err("Partition %s size: %llu does not match %llu!\n",
efi_str, (unsigned long long)gpt_part_size,
(unsigned long long)partitions[i].size);
return -1;
@@ -767,7 +767,7 @@
(unsigned long long)partitions[i].start);
if (le64_to_cpu(gpt_e[i].starting_lba) != partitions[i].start) {
- error("Partition %s start: %llu does not match %llu!\n",
+ pr_err("Partition %s start: %llu does not match %llu!\n",
efi_str, le64_to_cpu(gpt_e[i].starting_lba),
(unsigned long long)partitions[i].start);
return -1;
diff --git a/drivers/adc/adc-uclass.c b/drivers/adc/adc-uclass.c
index a5ef722..a4c20f4 100644
--- a/drivers/adc/adc-uclass.c
+++ b/drivers/adc/adc-uclass.c
@@ -64,7 +64,7 @@
}
if (ret)
- error("%s: can't enable %s-supply!", dev->name, supply_type);
+ pr_err("%s: can't enable %s-supply!", dev->name, supply_type);
return ret;
}
@@ -389,12 +389,12 @@
/* Set ADC VDD platdata: polarity, uV, regulator (phandle). */
ret = adc_vdd_platdata_set(dev);
if (ret)
- error("%s: Can't update Vdd. Error: %d", dev->name, ret);
+ pr_err("%s: Can't update Vdd. Error: %d", dev->name, ret);
/* Set ADC VSS platdata: polarity, uV, regulator (phandle). */
ret = adc_vss_platdata_set(dev);
if (ret)
- error("%s: Can't update Vss. Error: %d", dev->name, ret);
+ pr_err("%s: Can't update Vss. Error: %d", dev->name, ret);
return 0;
}
diff --git a/drivers/adc/exynos-adc.c b/drivers/adc/exynos-adc.c
index 324d72f..3bb065d 100644
--- a/drivers/adc/exynos-adc.c
+++ b/drivers/adc/exynos-adc.c
@@ -22,7 +22,7 @@
struct exynos_adc_v2 *regs = priv->regs;
if (channel != priv->active_channel) {
- error("Requested channel is not active!");
+ pr_err("Requested channel is not active!");
return -EINVAL;
}
@@ -80,7 +80,7 @@
/* Check HW version */
if (readl(®s->version) != ADC_V2_VERSION) {
- error("This driver supports only ADC v2!");
+ pr_err("This driver supports only ADC v2!");
return -ENXIO;
}
@@ -109,7 +109,7 @@
priv->regs = (struct exynos_adc_v2 *)devfdt_get_addr(dev);
if (priv->regs == (struct exynos_adc_v2 *)FDT_ADDR_T_NONE) {
- error("Dev: %s - can't get address!", dev->name);
+ pr_err("Dev: %s - can't get address!", dev->name);
return -ENODATA;
}
diff --git a/drivers/adc/rockchip-saradc.c b/drivers/adc/rockchip-saradc.c
index 0e6271d..a2856db 100644
--- a/drivers/adc/rockchip-saradc.c
+++ b/drivers/adc/rockchip-saradc.c
@@ -46,7 +46,7 @@
struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev);
if (channel != priv->active_channel) {
- error("Requested channel is not active!");
+ pr_err("Requested channel is not active!");
return -EINVAL;
}
@@ -69,7 +69,7 @@
struct rockchip_saradc_priv *priv = dev_get_priv(dev);
if (channel < 0 || channel >= priv->data->num_channels) {
- error("Requested channel is invalid!");
+ pr_err("Requested channel is invalid!");
return -EINVAL;
}
@@ -125,7 +125,7 @@
data = (struct rockchip_saradc_data *)dev_get_driver_data(dev);
priv->regs = (struct rockchip_saradc_regs *)dev_read_addr(dev);
if (priv->regs == (struct rockchip_saradc_regs *)FDT_ADDR_T_NONE) {
- error("Dev: %s - can't get address!", dev->name);
+ pr_err("Dev: %s - can't get address!", dev->name);
return -ENODATA;
}
diff --git a/drivers/adc/sandbox.c b/drivers/adc/sandbox.c
index 3718922..80e8e37 100644
--- a/drivers/adc/sandbox.c
+++ b/drivers/adc/sandbox.c
@@ -61,7 +61,7 @@
/* For single-channel conversion mode, check if channel was selected */
if ((priv->conversion_mode == SANDBOX_ADC_MODE_SINGLE_CHANNEL) &&
!(priv->active_channel_mask & (1 << channel))) {
- error("Request for an inactive channel!");
+ pr_err("Request for an inactive channel!");
return -EINVAL;
}
@@ -82,12 +82,12 @@
/* Return error for single-channel conversion mode */
if (priv->conversion_mode == SANDBOX_ADC_MODE_SINGLE_CHANNEL) {
- error("ADC in single-channel mode!");
+ pr_err("ADC in single-channel mode!");
return -EPERM;
}
/* Check channel selection */
if (!(priv->active_channel_mask & channel_mask)) {
- error("Request for an inactive channel!");
+ pr_err("Request for an inactive channel!");
return -EINVAL;
}
/* The conversion must be started before reading the data */
diff --git a/drivers/ata/dwc_ahci.c b/drivers/ata/dwc_ahci.c
index f614798..b16304b 100644
--- a/drivers/ata/dwc_ahci.c
+++ b/drivers/ata/dwc_ahci.c
@@ -58,19 +58,19 @@
ret = generic_phy_get_by_name(dev, "sata-phy", &phy);
if (ret) {
- error("can't get the phy from DT\n");
+ pr_err("can't get the phy from DT\n");
return ret;
}
ret = generic_phy_init(&phy);
if (ret) {
- error("unable to initialize the sata phy\n");
+ pr_err("unable to initialize the sata phy\n");
return ret;
}
ret = generic_phy_power_on(&phy);
if (ret) {
- error("unable to power on the sata phy\n");
+ pr_err("unable to power on the sata phy\n");
return ret;
}
diff --git a/drivers/clk/clk_boston.c b/drivers/clk/clk_boston.c
index 78f1b75..5c05e3d 100644
--- a/drivers/clk/clk_boston.c
+++ b/drivers/clk/clk_boston.c
@@ -67,13 +67,13 @@
err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
"regmap", &syscon);
if (err) {
- error("unable to find syscon device\n");
+ pr_err("unable to find syscon device\n");
return err;
}
state->regmap = syscon_get_regmap(syscon);
if (!state->regmap) {
- error("unable to find regmap\n");
+ pr_err("unable to find regmap\n");
return -ENODEV;
}
diff --git a/drivers/clk/clk_stm32f7.c b/drivers/clk/clk_stm32f7.c
index 68d6ba0..96a06b8 100644
--- a/drivers/clk/clk_stm32f7.c
+++ b/drivers/clk/clk_stm32f7.c
@@ -224,7 +224,7 @@
return sysclk >>= shift;
break;
default:
- error("clock index %ld out of range\n", clk->id);
+ pr_err("clock index %ld out of range\n", clk->id);
return -EINVAL;
break;
}
diff --git a/drivers/clk/clk_stm32h7.c b/drivers/clk/clk_stm32h7.c
index fd0e3ab..931e5ef 100644
--- a/drivers/clk/clk_stm32h7.c
+++ b/drivers/clk/clk_stm32h7.c
@@ -472,13 +472,13 @@
clk.id = 0;
ret = uclass_get_device_by_name(UCLASS_CLK, name, &fixed_clock_dev);
if (ret) {
- error("Can't find clk %s (%d)", name, ret);
+ pr_err("Can't find clk %s (%d)", name, ret);
return 0;
}
ret = clk_request(fixed_clock_dev, &clk);
if (ret) {
- error("Can't request %s clk (%d)", name, ret);
+ pr_err("Can't request %s clk (%d)", name, ret);
return 0;
}
@@ -518,7 +518,7 @@
break;
case RCC_PLLCKSELR_PLLSRC_NO_CLK:
/* shouldn't happen */
- error("wrong value for RCC_PLLCKSELR register\n");
+ pr_err("wrong value for RCC_PLLCKSELR register\n");
pllsrc = 0;
break;
}
@@ -695,7 +695,7 @@
break;
default:
- error("unexpected gate_offset value (0x%x)\n", gate_offset);
+ pr_err("unexpected gate_offset value (0x%x)\n", gate_offset);
return -EINVAL;
break;
}
@@ -739,13 +739,13 @@
"st,syscfg", &syscon);
if (err) {
- error("unable to find syscon device\n");
+ pr_err("unable to find syscon device\n");
return err;
}
priv->pwr_regmap = syscon_get_regmap(syscon);
if (!priv->pwr_regmap) {
- error("unable to find regmap\n");
+ pr_err("unable to find regmap\n");
return -ENODEV;
}
diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c
index 3a12be7..3661769 100644
--- a/drivers/clk/rockchip/clk_rk3368.c
+++ b/drivers/clk/rockchip/clk_rk3368.c
@@ -302,7 +302,7 @@
dpll_cfg = &dpll_1600;
break;
default:
- error("Unsupported SDRAM frequency!,%ld\n", set_rate);
+ pr_err("Unsupported SDRAM frequency!,%ld\n", set_rate);
}
rkclk_set_pll(cru, DPLL, dpll_cfg);
@@ -360,7 +360,7 @@
break;
default:
- error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+ pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
@@ -385,7 +385,7 @@
break;
default:
- error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+ pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
@@ -530,7 +530,7 @@
/* The reset driver does not have a device node, so bind it here */
ret = device_bind_driver(gd->dm_root, "rk3368_sysreset", "reset", &dev);
if (ret)
- error("bind RK3368 reset driver failed: ret=%d\n", ret);
+ pr_err("bind RK3368 reset driver failed: ret=%d\n", ret);
return ret;
}
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index 50faf5d..f45bba4 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -663,7 +663,7 @@
break;
default:
- error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+ pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
@@ -687,7 +687,7 @@
break;
default:
- error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+ pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
@@ -856,7 +856,7 @@
{.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1};
break;
default:
- error("Unsupported SDRAM frequency!,%ld\n", set_rate);
+ pr_err("Unsupported SDRAM frequency!,%ld\n", set_rate);
}
rkclk_set_pll(&cru->dpll_con[0], &dpll_cfg);
diff --git a/drivers/clk/rockchip/clk_rv1108.c b/drivers/clk/rockchip/clk_rv1108.c
index 86e73e4..55741c3 100644
--- a/drivers/clk/rockchip/clk_rv1108.c
+++ b/drivers/clk/rockchip/clk_rv1108.c
@@ -227,7 +227,7 @@
/* The reset driver does not have a device node, so bind it here */
ret = device_bind_driver(gd->dm_root, "rv1108_sysreset", "reset", &dev);
if (ret)
- error("No Rv1108 reset driver: ret=%d\n", ret);
+ pr_err("No Rv1108 reset driver: ret=%d\n", ret);
return 0;
}
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index ff732ac..2c22b62 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -64,14 +64,14 @@
#endif
str_env = env_get("dfu_alt_info");
if (!str_env) {
- error("\"dfu_alt_info\" env variable not defined!\n");
+ pr_err("\"dfu_alt_info\" env variable not defined!\n");
return -EINVAL;
}
env_bkp = strdup(str_env);
ret = dfu_config_entities(env_bkp, interface, devstr);
if (ret) {
- error("DFU entities configuration failed!\n");
+ pr_err("DFU entities configuration failed!\n");
return ret;
}
@@ -132,7 +132,7 @@
return s;
}
- error("DFU hash method: %s not supported!\n", s);
+ pr_err("DFU hash method: %s not supported!\n", s);
return NULL;
}
@@ -273,7 +273,7 @@
/* we should be in buffer now (if not then size too large) */
if ((dfu->i_buf + size) > dfu->i_buf_end) {
- error("Buffer overflow! (0x%p + 0x%x > 0x%p)\n", dfu->i_buf,
+ pr_err("Buffer overflow! (0x%p + 0x%x > 0x%p)\n", dfu->i_buf,
size, dfu->i_buf_end);
dfu_transaction_cleanup(dfu);
return -1;
@@ -451,7 +451,7 @@
if (s) {
ret = hash_lookup_algo(s, &dfu_hash_algo);
if (ret)
- error("Hash algorithm %s not supported\n", s);
+ pr_err("Hash algorithm %s not supported\n", s);
}
dfu = calloc(sizeof(*dfu), dfu_alt_num);
@@ -576,7 +576,7 @@
dp, left, write);
ret = dfu_write(dfu, dp, write, i);
if (ret) {
- error("DFU write failed\n");
+ pr_err("DFU write failed\n");
return ret;
}
@@ -586,7 +586,7 @@
ret = dfu_flush(dfu, NULL, 0, i);
if (ret)
- error("DFU flush failed!");
+ pr_err("DFU flush failed!");
return ret;
}
diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
index 39e10b1..47948d3 100644
--- a/drivers/dfu/dfu_mmc.c
+++ b/drivers/dfu/dfu_mmc.c
@@ -29,7 +29,7 @@
mmc = find_mmc_device(dfu->data.mmc.dev_num);
if (!mmc) {
- error("Device MMC %d - not found!", dfu->data.mmc.dev_num);
+ pr_err("Device MMC %d - not found!", dfu->data.mmc.dev_num);
return -ENODEV;
}
@@ -69,11 +69,11 @@
buf);
break;
default:
- error("Operation not supported\n");
+ pr_err("Operation not supported\n");
}
if (n != blk_count) {
- error("MMC operation failed");
+ pr_err("MMC operation failed");
if (dfu->data.mmc.hw_partition >= 0)
blk_select_hwpart_devnum(IF_TYPE_MMC,
dfu->data.mmc.dev_num,
@@ -312,7 +312,7 @@
for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) {
*parg = strsep(&s, " ");
if (*parg == NULL) {
- error("Invalid number of arguments.\n");
+ pr_err("Invalid number of arguments.\n");
return -ENODEV;
}
}
@@ -327,13 +327,13 @@
mmc = find_mmc_device(dfu->data.mmc.dev_num);
if (mmc == NULL) {
- error("Couldn't find MMC device no. %d.\n",
+ pr_err("Couldn't find MMC device no. %d.\n",
dfu->data.mmc.dev_num);
return -ENODEV;
}
if (mmc_init(mmc)) {
- error("Couldn't init MMC device.\n");
+ pr_err("Couldn't init MMC device.\n");
return -ENODEV;
}
@@ -360,7 +360,7 @@
int mmcpart = third_arg;
if (part_get_info(blk_dev, mmcpart, &partinfo) != 0) {
- error("Couldn't find part #%d on mmc device #%d\n",
+ pr_err("Couldn't find part #%d on mmc device #%d\n",
mmcpart, mmcdev);
return -ENODEV;
}
@@ -374,7 +374,7 @@
} else if (!strcmp(entity_type, "ext4")) {
dfu->layout = DFU_FS_EXT4;
} else {
- error("Memory layout (%s) not supported!\n", entity_type);
+ pr_err("Memory layout (%s) not supported!\n", entity_type);
return -ENODEV;
}
@@ -397,7 +397,7 @@
dfu_file_buf = memalign(CONFIG_SYS_CACHELINE_SIZE,
CONFIG_SYS_DFU_MAX_FILE_SIZE);
if (!dfu_file_buf) {
- error("Could not memalign 0x%x bytes",
+ pr_err("Could not memalign 0x%x bytes",
CONFIG_SYS_DFU_MAX_FILE_SIZE);
return -ENOMEM;
}
diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c
index 6e3f531..2b5e05a 100644
--- a/drivers/dfu/dfu_ram.c
+++ b/drivers/dfu/dfu_ram.c
@@ -18,12 +18,12 @@
u64 offset, void *buf, long *len)
{
if (dfu->layout != DFU_RAM_ADDR) {
- error("unsupported layout: %s\n", dfu_get_layout(dfu->layout));
+ pr_err("unsupported layout: %s\n", dfu_get_layout(dfu->layout));
return -EINVAL;
}
if (offset > dfu->data.ram.size) {
- error("request exceeds allowed area\n");
+ pr_err("request exceeds allowed area\n");
return -EINVAL;
}
@@ -62,14 +62,14 @@
for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) {
*parg = strsep(&s, " ");
if (*parg == NULL) {
- error("Invalid number of arguments.\n");
+ pr_err("Invalid number of arguments.\n");
return -ENODEV;
}
}
dfu->dev_type = DFU_DEV_RAM;
if (strcmp(argv[0], "ram")) {
- error("unsupported device: %s\n", argv[0]);
+ pr_err("unsupported device: %s\n", argv[0]);
return -ENODEV;
}
diff --git a/drivers/dfu/dfu_tftp.c b/drivers/dfu/dfu_tftp.c
index cd71708..62bf797 100644
--- a/drivers/dfu/dfu_tftp.c
+++ b/drivers/dfu/dfu_tftp.c
@@ -43,7 +43,7 @@
alt_setting_num = dfu_get_alt(sb);
free(sb);
if (alt_setting_num < 0) {
- error("Alt setting [%d] to write not found!",
+ pr_err("Alt setting [%d] to write not found!",
alt_setting_num);
ret = -ENODEV;
goto done;
@@ -51,7 +51,7 @@
dfu = dfu_get_entity(alt_setting_num);
if (!dfu) {
- error("DFU entity for alt: %d not found!", alt_setting_num);
+ pr_err("DFU entity for alt: %d not found!", alt_setting_num);
ret = -ENODEV;
goto done;
}
diff --git a/drivers/dma/dma-uclass.c b/drivers/dma/dma-uclass.c
index ea21fd9..3d0ce22 100644
--- a/drivers/dma/dma-uclass.c
+++ b/drivers/dma/dma-uclass.c
@@ -33,7 +33,7 @@
}
if (!dev) {
- error("No DMA device found that supports %x type\n",
+ pr_err("No DMA device found that supports %x type\n",
transfer_type);
return -EPROTONOSUPPORT;
}
diff --git a/drivers/dma/lpc32xx_dma.c b/drivers/dma/lpc32xx_dma.c
index 955adfe..63a8a2f 100644
--- a/drivers/dma/lpc32xx_dma.c
+++ b/drivers/dma/lpc32xx_dma.c
@@ -96,7 +96,7 @@
{
if (unlikely(((BIT_MASK(channel) & alloc_ch) == 0) ||
(channel >= DMA_NO_OF_CHANNELS))) {
- error("Request for xfer on unallocated channel %d", channel);
+ pr_err("Request for xfer on unallocated channel %d", channel);
return -1;
}
writel(BIT_MASK(channel), &dma->int_tc_clear);
@@ -117,7 +117,7 @@
/* Check if given channel is valid */
if (unlikely(channel >= DMA_NO_OF_CHANNELS)) {
- error("Request for status on unallocated channel %d", channel);
+ pr_err("Request for status on unallocated channel %d", channel);
return -1;
}
@@ -129,7 +129,7 @@
break;
if (get_timer(start) > CONFIG_SYS_HZ) {
- error("DMA status timeout channel %d\n", channel);
+ pr_err("DMA status timeout channel %d\n", channel);
return -ETIMEDOUT;
}
udelay(1);
@@ -138,7 +138,7 @@
if (unlikely(readl(&dma->raw_err_stat) & BIT_MASK(channel))) {
setbits_le32(&dma->int_err_clear, BIT_MASK(channel));
setbits_le32(&dma->raw_err_stat, BIT_MASK(channel));
- error("DMA error on channel %d\n", channel);
+ pr_err("DMA error on channel %d\n", channel);
return -1;
}
setbits_le32(&dma->int_tc_clear, BIT_MASK(channel));
diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c
index 39e9793..635eb78 100644
--- a/drivers/dma/ti-edma3.c
+++ b/drivers/dma/ti-edma3.c
@@ -491,7 +491,7 @@
__edma3_transfer(priv->base, 1, dst, src, len);
break;
default:
- error("Transfer type not implemented in DMA driver\n");
+ pr_err("Transfer type not implemented in DMA driver\n");
break;
}
diff --git a/drivers/i2c/i2c-gpio.c b/drivers/i2c/i2c-gpio.c
index aeeb304..4e8fa21 100644
--- a/drivers/i2c/i2c-gpio.c
+++ b/drivers/i2c/i2c-gpio.c
@@ -322,7 +322,7 @@
return 0;
error:
- error("Can't get %s gpios! Error: %d", dev->name, ret);
+ pr_err("Can't get %s gpios! Error: %d", dev->name, ret);
return ret;
}
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index c98c627..5d33815 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -755,7 +755,7 @@
ret = __omap24_i2c_setspeed(i2c_base, speed, &adap->waitdelay);
if (ret) {
- error("%s: set i2c speed failed\n", __func__);
+ pr_err("%s: set i2c speed failed\n", __func__);
return ret;
}
diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c
index bf5fefa..196f236 100644
--- a/drivers/i2c/stm32f7_i2c.c
+++ b/drivers/i2c/stm32f7_i2c.c
@@ -549,7 +549,7 @@
}
if (list_empty(solutions)) {
- error("%s: no Prescaler solution\n", __func__);
+ pr_err("%s: no Prescaler solution\n", __func__);
ret = -EPERM;
}
@@ -627,7 +627,7 @@
}
if (!s) {
- error("%s: no solution at all\n", __func__);
+ pr_err("%s: no solution at all\n", __func__);
ret = -EPERM;
}
@@ -643,14 +643,14 @@
int ret;
if (setup->speed >= STM32_I2C_SPEED_END) {
- error("%s: speed out of bound {%d/%d}\n", __func__,
+ pr_err("%s: speed out of bound {%d/%d}\n", __func__,
setup->speed, STM32_I2C_SPEED_END - 1);
return -EINVAL;
}
if ((setup->rise_time > i2c_specs[setup->speed].rise_max) ||
(setup->fall_time > i2c_specs[setup->speed].fall_max)) {
- error("%s :timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
+ pr_err("%s :timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
__func__,
setup->rise_time, i2c_specs[setup->speed].rise_max,
setup->fall_time, i2c_specs[setup->speed].fall_max);
@@ -658,13 +658,13 @@
}
if (setup->dnf > STM32_I2C_DNF_MAX) {
- error("%s: DNF out of bound %d/%d\n", __func__,
+ pr_err("%s: DNF out of bound %d/%d\n", __func__,
setup->dnf, STM32_I2C_DNF_MAX);
return -EINVAL;
}
if (setup->speed_freq > i2c_specs[setup->speed].rate) {
- error("%s: Freq {%d/%d}\n", __func__,
+ pr_err("%s: Freq {%d/%d}\n", __func__,
setup->speed_freq, i2c_specs[setup->speed].rate);
return -EINVAL;
}
@@ -711,7 +711,7 @@
setup->clock_src = clk_get_rate(&i2c_priv->clk);
if (!setup->clock_src) {
- error("%s: clock rate is 0\n", __func__);
+ pr_err("%s: clock rate is 0\n", __func__);
return -EINVAL;
}
@@ -734,7 +734,7 @@
} while (ret);
if (ret) {
- error("%s: impossible to compute I2C timings.\n", __func__);
+ pr_err("%s: impossible to compute I2C timings.\n", __func__);
return ret;
}
diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c
index 3255e8e..7d23e51 100644
--- a/drivers/i2c/tegra_i2c.c
+++ b/drivers/i2c/tegra_i2c.c
@@ -372,12 +372,12 @@
ret = reset_get_by_name(dev, "i2c", &i2c_bus->reset_ctl);
if (ret) {
- error("reset_get_by_name() failed: %d\n", ret);
+ pr_err("reset_get_by_name() failed: %d\n", ret);
return ret;
}
ret = clk_get_by_name(dev, "div-clk", &i2c_bus->clk);
if (ret) {
- error("clk_get_by_name() failed: %d\n", ret);
+ pr_err("clk_get_by_name() failed: %d\n", ret);
return ret;
}
diff --git a/drivers/misc/tegra186_bpmp.c b/drivers/misc/tegra186_bpmp.c
index d61bacf..1fdf8ef 100644
--- a/drivers/misc/tegra186_bpmp.c
+++ b/drivers/misc/tegra186_bpmp.c
@@ -44,7 +44,7 @@
ret = tegra_ivc_write_get_next_frame(&priv->ivc, &ivc_frame);
if (ret) {
- error("tegra_ivc_write_get_next_frame() failed: %d\n", ret);
+ pr_err("tegra_ivc_write_get_next_frame() failed: %d\n", ret);
return ret;
}
@@ -55,7 +55,7 @@
ret = tegra_ivc_write_advance(&priv->ivc);
if (ret) {
- error("tegra_ivc_write_advance() failed: %d\n", ret);
+ pr_err("tegra_ivc_write_advance() failed: %d\n", ret);
return ret;
}
@@ -63,7 +63,7 @@
for (;;) {
ret = tegra_ivc_channel_notified(&priv->ivc);
if (ret) {
- error("tegra_ivc_channel_notified() failed: %d\n", ret);
+ pr_err("tegra_ivc_channel_notified() failed: %d\n", ret);
return ret;
}
@@ -73,7 +73,7 @@
/* Timeout 20ms; roughly 10x current max observed duration */
if ((timer_get_us() - start_time) > 20 * 1000) {
- error("tegra_ivc_read_get_next_frame() timed out (%d)\n",
+ pr_err("tegra_ivc_read_get_next_frame() timed out (%d)\n",
ret);
return -ETIMEDOUT;
}
@@ -86,12 +86,12 @@
ret = tegra_ivc_read_advance(&priv->ivc);
if (ret) {
- error("tegra_ivc_write_advance() failed: %d\n", ret);
+ pr_err("tegra_ivc_write_advance() failed: %d\n", ret);
return ret;
}
if (err) {
- error("BPMP responded with error %d\n", err);
+ pr_err("BPMP responded with error %d\n", err);
/* err isn't a U-Boot error code, so don't that */
return -EIO;
}
@@ -144,14 +144,14 @@
ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev_of_offset(dev),
"shmem", NULL, 0, index, &args);
if (ret < 0) {
- error("fdtdec_parse_phandle_with_args() failed: %d\n", ret);
+ pr_err("fdtdec_parse_phandle_with_args() failed: %d\n", ret);
return ret;
}
reg = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, args.node,
"reg", 0, NULL, true);
if (reg == FDT_ADDR_T_NONE) {
- error("fdtdec_get_addr_size_auto_noparent() failed\n");
+ pr_err("fdtdec_get_addr_size_auto_noparent() failed\n");
return -ENODEV;
}
@@ -166,7 +166,7 @@
ret = mbox_send(&priv->mbox, NULL);
if (ret)
- error("mbox_send() failed: %d\n", ret);
+ pr_err("mbox_send() failed: %d\n", ret);
}
static int tegra186_bpmp_probe(struct udevice *dev)
@@ -179,18 +179,18 @@
ret = mbox_get_by_index(dev, 0, &priv->mbox);
if (ret) {
- error("mbox_get_by_index() failed: %d\n", ret);
+ pr_err("mbox_get_by_index() failed: %d\n", ret);
return ret;
}
tx_base = tegra186_bpmp_get_shmem(dev, 0);
if (IS_ERR_VALUE(tx_base)) {
- error("tegra186_bpmp_get_shmem failed for tx_base\n");
+ pr_err("tegra186_bpmp_get_shmem failed for tx_base\n");
return tx_base;
}
rx_base = tegra186_bpmp_get_shmem(dev, 1);
if (IS_ERR_VALUE(rx_base)) {
- error("tegra186_bpmp_get_shmem failed for rx_base\n");
+ pr_err("tegra186_bpmp_get_shmem failed for rx_base\n");
return rx_base;
}
debug("shmem: rx=%lx, tx=%lx\n", rx_base, tx_base);
@@ -198,7 +198,7 @@
ret = tegra_ivc_init(&priv->ivc, rx_base, tx_base, BPMP_IVC_FRAME_COUNT,
BPMP_IVC_FRAME_SIZE, tegra186_bpmp_ivc_notify);
if (ret) {
- error("tegra_ivc_init() failed: %d\n", ret);
+ pr_err("tegra_ivc_init() failed: %d\n", ret);
return ret;
}
@@ -211,7 +211,7 @@
/* Timeout 100ms */
if ((timer_get_us() - start_time) > 100 * 1000) {
- error("Initial IVC reset timed out (%d)\n", ret);
+ pr_err("Initial IVC reset timed out (%d)\n", ret);
ret = -ETIMEDOUT;
goto err_free_mbox;
}
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 40f7892..5edd383 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -155,7 +155,7 @@
priv = malloc(sizeof(struct dwmci_exynos_priv_data));
if (!priv) {
- error("dwmci_exynos_priv_data malloc fail!\n");
+ pr_err("dwmci_exynos_priv_data malloc fail!\n");
return -ENOMEM;
}
diff --git a/drivers/mmc/hi6220_dw_mmc.c b/drivers/mmc/hi6220_dw_mmc.c
index d795198..44a8ef8 100644
--- a/drivers/mmc/hi6220_dw_mmc.c
+++ b/drivers/mmc/hi6220_dw_mmc.c
@@ -44,7 +44,7 @@
host = calloc(1, sizeof(struct dwmci_host));
if (!host) {
- error("dwmci_host calloc failed!\n");
+ pr_err("dwmci_host calloc failed!\n");
return -ENOMEM;
}
diff --git a/drivers/mmc/sti_sdhci.c b/drivers/mmc/sti_sdhci.c
index d8b5888..a98c1eb 100644
--- a/drivers/mmc/sti_sdhci.c
+++ b/drivers/mmc/sti_sdhci.c
@@ -43,7 +43,7 @@
if (plat->instance) {
ret = reset_deassert(&plat->reset);
if (ret < 0) {
- error("MMC1 deassert failed: %d", ret);
+ pr_err("MMC1 deassert failed: %d", ret);
return ret;
}
}
diff --git a/drivers/mmc/stm32_sdmmc2.c b/drivers/mmc/stm32_sdmmc2.c
index 0e1f40b..0bf7135 100644
--- a/drivers/mmc/stm32_sdmmc2.c
+++ b/drivers/mmc/stm32_sdmmc2.c
@@ -569,7 +569,7 @@
case 1:
break;
default:
- error("invalid \"bus-width\" property, force to 1\n");
+ pr_err("invalid \"bus-width\" property, force to 1\n");
}
upriv->mmc = &plat->mmc;
diff --git a/drivers/mmc/xenon_sdhci.c b/drivers/mmc/xenon_sdhci.c
index 2b7cb7f..490a01f 100644
--- a/drivers/mmc/xenon_sdhci.c
+++ b/drivers/mmc/xenon_sdhci.c
@@ -159,7 +159,7 @@
}
if (time <= 0) {
- error("Failed to enable MMC internal clock in time\n");
+ pr_err("Failed to enable MMC internal clock in time\n");
return -ETIMEDOUT;
}
@@ -187,7 +187,7 @@
}
if (time <= 0) {
- error("Failed to init MMC PHY in time\n");
+ pr_err("Failed to init MMC PHY in time\n");
return -ETIMEDOUT;
}
diff --git a/drivers/mtd/nand/lpc32xx_nand_mlc.c b/drivers/mtd/nand/lpc32xx_nand_mlc.c
index 3af7e6d..e1b3670 100644
--- a/drivers/mtd/nand/lpc32xx_nand_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_nand_mlc.c
@@ -583,21 +583,21 @@
/* identify chip */
ret = nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_CHIPS, NULL);
if (ret) {
- error("nand_scan_ident returned %i", ret);
+ pr_err("nand_scan_ident returned %i", ret);
return;
}
/* finish scanning the chip */
ret = nand_scan_tail(mtd);
if (ret) {
- error("nand_scan_tail returned %i", ret);
+ pr_err("nand_scan_tail returned %i", ret);
return;
}
/* chip is good, register it */
ret = nand_register(0, mtd);
if (ret)
- error("nand_register returned %i", ret);
+ pr_err("nand_register returned %i", ret);
}
#else /* defined(CONFIG_SPL_BUILD) */
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 0042a7b..6ab3c8a 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1559,7 +1559,7 @@
pdata->num_cs = fdtdec_get_int(blob, node, "num-cs", 1);
if (pdata->num_cs != 1) {
- error("pxa3xx driver supports single CS only\n");
+ pr_err("pxa3xx driver supports single CS only\n");
break;
}
diff --git a/drivers/net/bcm-sf2-eth-gmac.c b/drivers/net/bcm-sf2-eth-gmac.c
index 9ff72fa..a2b594e 100644
--- a/drivers/net/bcm-sf2-eth-gmac.c
+++ b/drivers/net/bcm-sf2-eth-gmac.c
@@ -610,7 +610,7 @@
/* Busy wait timeout is 1ms */
if (gmac_mii_busywait(1000)) {
- error("%s: Prepare MII read: MII/MDIO busy\n", __func__);
+ pr_err("%s: Prepare MII read: MII/MDIO busy\n", __func__);
return -1;
}
@@ -622,7 +622,7 @@
writel(tmp, GMAC_MII_DATA_ADDR);
if (gmac_mii_busywait(1000)) {
- error("%s: MII read failure: MII/MDIO busy\n", __func__);
+ pr_err("%s: MII read failure: MII/MDIO busy\n", __func__);
return -1;
}
@@ -638,7 +638,7 @@
/* Busy wait timeout is 1ms */
if (gmac_mii_busywait(1000)) {
- error("%s: Prepare MII write: MII/MDIO busy\n", __func__);
+ pr_err("%s: Prepare MII write: MII/MDIO busy\n", __func__);
return -1;
}
@@ -651,7 +651,7 @@
writel(tmp, GMAC_MII_DATA_ADDR);
if (gmac_mii_busywait(1000)) {
- error("%s: MII write failure: MII/MDIO busy\n", __func__);
+ pr_err("%s: MII write failure: MII/MDIO busy\n", __func__);
return -1;
}
@@ -742,7 +742,7 @@
} else if (speed == 10) {
speed_cfg = 0;
} else {
- error("%s: Invalid GMAC speed(%d)!\n", __func__, speed);
+ pr_err("%s: Invalid GMAC speed(%d)!\n", __func__, speed);
return -1;
}
@@ -820,7 +820,7 @@
writel(0, GMAC0_INT_STATUS_ADDR);
if (dma_init(dma) < 0) {
- error("%s: GMAC dma_init failed\n", __func__);
+ pr_err("%s: GMAC dma_init failed\n", __func__);
goto err_exit;
}
@@ -855,7 +855,7 @@
writel(tmp, GMAC_MII_CTRL_ADDR);
if (gmac_mii_busywait(1000)) {
- error("%s: Configure MDIO: MII/MDIO busy\n", __func__);
+ pr_err("%s: Configure MDIO: MII/MDIO busy\n", __func__);
goto err_exit;
}
diff --git a/drivers/net/bcm-sf2-eth.c b/drivers/net/bcm-sf2-eth.c
index e274736..9056f71 100644
--- a/drivers/net/bcm-sf2-eth.c
+++ b/drivers/net/bcm-sf2-eth.c
@@ -40,7 +40,7 @@
rc = eth->mac_init(dev);
if (rc) {
- error("%s: Couldn't cofigure MAC!\n", __func__);
+ pr_err("%s: Couldn't cofigure MAC!\n", __func__);
return rc;
}
@@ -90,7 +90,7 @@
debug(".");
i++;
if (i > 20) {
- error("%s: Tx timeout: retried 20 times\n", __func__);
+ pr_err("%s: Tx timeout: retried 20 times\n", __func__);
rc = -1;
break;
}
@@ -117,7 +117,7 @@
debug("\nNO More Rx\n");
break;
} else if ((rcvlen == 0) || (rcvlen > RX_BUF_SIZE)) {
- error("%s: Wrong Ethernet packet size (%d B), skip!\n",
+ pr_err("%s: Wrong Ethernet packet size (%d B), skip!\n",
__func__, rcvlen);
break;
} else {
@@ -166,9 +166,9 @@
*/
for (i = 0; i < eth->port_num; i++) {
if (phy_startup(eth->port[i])) {
- error("%s: PHY %d startup failed!\n", __func__, i);
+ pr_err("%s: PHY %d startup failed!\n", __func__, i);
if (i == CONFIG_BCM_SF2_ETH_DEFAULT_PORT) {
- error("%s: No default port %d!\n", __func__, i);
+ pr_err("%s: No default port %d!\n", __func__, i);
return -1;
}
}
@@ -205,13 +205,13 @@
dev = (struct eth_device *)malloc(sizeof(struct eth_device));
if (dev == NULL) {
- error("%s: Not enough memory!\n", __func__);
+ pr_err("%s: Not enough memory!\n", __func__);
return -1;
}
eth = (struct eth_info *)malloc(sizeof(struct eth_info));
if (eth == NULL) {
- error("%s: Not enough memory!\n", __func__);
+ pr_err("%s: Not enough memory!\n", __func__);
return -1;
}
@@ -234,7 +234,7 @@
if (gmac_add(dev)) {
free(eth);
free(dev);
- error("%s: Adding GMAC failed!\n", __func__);
+ pr_err("%s: Adding GMAC failed!\n", __func__);
return -1;
}
#else
@@ -263,7 +263,7 @@
rc = bcm_sf2_eth_init(dev);
if (rc != 0) {
- error("%s: configuration failed!\n", __func__);
+ pr_err("%s: configuration failed!\n", __func__);
return -1;
}
diff --git a/drivers/net/cpsw-common.c b/drivers/net/cpsw-common.c
index 8970ee0..0dc83ab 100644
--- a/drivers/net/cpsw-common.c
+++ b/drivers/net/cpsw-common.c
@@ -29,14 +29,14 @@
syscon = fdtdec_lookup_phandle(fdt, node, "syscon");
if (syscon < 0) {
- error("Syscon offset not found\n");
+ pr_err("Syscon offset not found\n");
return -ENOENT;
}
addr = (u32)map_physmem(fdt_translate_address(fdt, syscon, &gmii),
sizeof(u32), MAP_NOCACHE);
if (addr == FDT_ADDR_T_NONE) {
- error("Not able to get syscon address to get mac efuse address\n");
+ pr_err("Not able to get syscon address to get mac efuse address\n");
return -ENOENT;
}
@@ -69,14 +69,14 @@
syscon = fdtdec_lookup_phandle(fdt, node, "syscon");
if (syscon < 0) {
- error("Syscon offset not found\n");
+ pr_err("Syscon offset not found\n");
return -ENOENT;
}
addr = (u32)map_physmem(fdt_translate_address(fdt, syscon, &gmii),
sizeof(u32), MAP_NOCACHE);
if (addr == FDT_ADDR_T_NONE) {
- error("Not able to get syscon address to get mac efuse address\n");
+ pr_err("Not able to get syscon address to get mac efuse address\n");
return -ENOENT;
}
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index d7db0fc..b72258f 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -1368,7 +1368,7 @@
mdio_base = cpsw_get_addr_by_node(fdt, subnode);
if (mdio_base == FDT_ADDR_T_NONE) {
- error("Not able to get MDIO address space\n");
+ pr_err("Not able to get MDIO address space\n");
return -ENOENT;
}
priv->data.mdio_base = mdio_base;
@@ -1407,7 +1407,7 @@
subnode);
if (priv->data.gmii_sel == FDT_ADDR_T_NONE) {
- error("Not able to get gmii_sel reg address\n");
+ pr_err("Not able to get gmii_sel reg address\n");
return -ENOENT;
}
@@ -1418,7 +1418,7 @@
phy_sel_compat = fdt_getprop(fdt, subnode, "compatible",
NULL);
if (!phy_sel_compat) {
- error("Not able to get gmii_sel compatible\n");
+ pr_err("Not able to get gmii_sel compatible\n");
return -ENOENT;
}
}
@@ -1434,7 +1434,7 @@
ret = ti_cm_get_macid(dev, active_slave, pdata->enetaddr);
if (ret < 0) {
- error("cpsw read efuse mac failed\n");
+ pr_err("cpsw read efuse mac failed\n");
return ret;
}
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 5c4315f..00076cf 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -377,7 +377,7 @@
ret = eqos_mdio_wait_idle(eqos);
if (ret) {
- error("MDIO not idle at entry");
+ pr_err("MDIO not idle at entry");
return ret;
}
@@ -397,7 +397,7 @@
ret = eqos_mdio_wait_idle(eqos);
if (ret) {
- error("MDIO read didn't complete");
+ pr_err("MDIO read didn't complete");
return ret;
}
@@ -421,7 +421,7 @@
ret = eqos_mdio_wait_idle(eqos);
if (ret) {
- error("MDIO not idle at entry");
+ pr_err("MDIO not idle at entry");
return ret;
}
@@ -443,7 +443,7 @@
ret = eqos_mdio_wait_idle(eqos);
if (ret) {
- error("MDIO read didn't complete");
+ pr_err("MDIO read didn't complete");
return ret;
}
@@ -459,37 +459,37 @@
ret = clk_enable(&eqos->clk_slave_bus);
if (ret < 0) {
- error("clk_enable(clk_slave_bus) failed: %d", ret);
+ pr_err("clk_enable(clk_slave_bus) failed: %d", ret);
goto err;
}
ret = clk_enable(&eqos->clk_master_bus);
if (ret < 0) {
- error("clk_enable(clk_master_bus) failed: %d", ret);
+ pr_err("clk_enable(clk_master_bus) failed: %d", ret);
goto err_disable_clk_slave_bus;
}
ret = clk_enable(&eqos->clk_rx);
if (ret < 0) {
- error("clk_enable(clk_rx) failed: %d", ret);
+ pr_err("clk_enable(clk_rx) failed: %d", ret);
goto err_disable_clk_master_bus;
}
ret = clk_enable(&eqos->clk_ptp_ref);
if (ret < 0) {
- error("clk_enable(clk_ptp_ref) failed: %d", ret);
+ pr_err("clk_enable(clk_ptp_ref) failed: %d", ret);
goto err_disable_clk_rx;
}
ret = clk_set_rate(&eqos->clk_ptp_ref, 125 * 1000 * 1000);
if (ret < 0) {
- error("clk_set_rate(clk_ptp_ref) failed: %d", ret);
+ pr_err("clk_set_rate(clk_ptp_ref) failed: %d", ret);
goto err_disable_clk_ptp_ref;
}
ret = clk_enable(&eqos->clk_tx);
if (ret < 0) {
- error("clk_enable(clk_tx) failed: %d", ret);
+ pr_err("clk_enable(clk_tx) failed: %d", ret);
goto err_disable_clk_ptp_ref;
}
@@ -533,7 +533,7 @@
ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 1);
if (ret < 0) {
- error("dm_gpio_set_value(phy_reset, assert) failed: %d", ret);
+ pr_err("dm_gpio_set_value(phy_reset, assert) failed: %d", ret);
return ret;
}
@@ -541,13 +541,13 @@
ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 0);
if (ret < 0) {
- error("dm_gpio_set_value(phy_reset, deassert) failed: %d", ret);
+ pr_err("dm_gpio_set_value(phy_reset, deassert) failed: %d", ret);
return ret;
}
ret = reset_assert(&eqos->reset_ctl);
if (ret < 0) {
- error("reset_assert() failed: %d", ret);
+ pr_err("reset_assert() failed: %d", ret);
return ret;
}
@@ -555,7 +555,7 @@
ret = reset_deassert(&eqos->reset_ctl);
if (ret < 0) {
- error("reset_deassert() failed: %d", ret);
+ pr_err("reset_deassert() failed: %d", ret);
return ret;
}
@@ -591,14 +591,14 @@
ret = wait_for_bit(__func__, &eqos->tegra186_regs->auto_cal_status,
EQOS_AUTO_CAL_STATUS_ACTIVE, true, 10, false);
if (ret) {
- error("calibrate didn't start");
+ pr_err("calibrate didn't start");
goto failed;
}
ret = wait_for_bit(__func__, &eqos->tegra186_regs->auto_cal_status,
EQOS_AUTO_CAL_STATUS_ACTIVE, false, 10, false);
if (ret) {
- error("calibrate didn't finish");
+ pr_err("calibrate didn't finish");
goto failed;
}
@@ -713,13 +713,13 @@
rate = 2.5 * 1000 * 1000;
break;
default:
- error("invalid speed %d", eqos->phy->speed);
+ pr_err("invalid speed %d", eqos->phy->speed);
return -EINVAL;
}
ret = clk_set_rate(&eqos->clk_tx, rate);
if (ret < 0) {
- error("clk_set_rate(tx_clk, %lu) failed: %d", rate, ret);
+ pr_err("clk_set_rate(tx_clk, %lu) failed: %d", rate, ret);
return ret;
}
@@ -739,7 +739,7 @@
else
ret = eqos_set_half_duplex(dev);
if (ret < 0) {
- error("eqos_set_*_duplex() failed: %d", ret);
+ pr_err("eqos_set_*_duplex() failed: %d", ret);
return ret;
}
@@ -757,24 +757,24 @@
ret = eqos_set_mii_speed_10(dev);
break;
default:
- error("invalid speed %d", eqos->phy->speed);
+ pr_err("invalid speed %d", eqos->phy->speed);
return -EINVAL;
}
if (ret < 0) {
- error("eqos_set_*mii_speed*() failed: %d", ret);
+ pr_err("eqos_set_*mii_speed*() failed: %d", ret);
return ret;
}
if (en_calibration) {
ret = eqos_calibrate_pads_tegra186(dev);
if (ret < 0) {
- error("eqos_calibrate_pads_tegra186() failed: %d", ret);
+ pr_err("eqos_calibrate_pads_tegra186() failed: %d", ret);
return ret;
}
} else {
ret = eqos_disable_calibration_tegra186(dev);
if (ret < 0) {
- error("eqos_disable_calibration_tegra186() failed: %d",
+ pr_err("eqos_disable_calibration_tegra186() failed: %d",
ret);
return ret;
}
@@ -782,7 +782,7 @@
ret = eqos_set_tx_clk_speed_tegra186(dev);
if (ret < 0) {
- error("eqos_set_tx_clk_speed_tegra186() failed: %d", ret);
+ pr_err("eqos_set_tx_clk_speed_tegra186() failed: %d", ret);
return ret;
}
@@ -848,13 +848,13 @@
ret = eqos_start_clks_tegra186(dev);
if (ret < 0) {
- error("eqos_start_clks_tegra186() failed: %d", ret);
+ pr_err("eqos_start_clks_tegra186() failed: %d", ret);
goto err;
}
ret = eqos_start_resets_tegra186(dev);
if (ret < 0) {
- error("eqos_start_resets_tegra186() failed: %d", ret);
+ pr_err("eqos_start_resets_tegra186() failed: %d", ret);
goto err_stop_clks;
}
@@ -865,13 +865,13 @@
ret = wait_for_bit(__func__, &eqos->dma_regs->mode,
EQOS_DMA_MODE_SWR, false, 10, false);
if (ret) {
- error("EQOS_DMA_MODE_SWR stuck");
+ pr_err("EQOS_DMA_MODE_SWR stuck");
goto err_stop_resets;
}
ret = eqos_calibrate_pads_tegra186(dev);
if (ret < 0) {
- error("eqos_calibrate_pads_tegra186() failed: %d", ret);
+ pr_err("eqos_calibrate_pads_tegra186() failed: %d", ret);
goto err_stop_resets;
}
@@ -881,28 +881,28 @@
eqos->phy = phy_connect(eqos->mii, 0, dev, 0);
if (!eqos->phy) {
- error("phy_connect() failed");
+ pr_err("phy_connect() failed");
goto err_stop_resets;
}
ret = phy_config(eqos->phy);
if (ret < 0) {
- error("phy_config() failed: %d", ret);
+ pr_err("phy_config() failed: %d", ret);
goto err_shutdown_phy;
}
ret = phy_startup(eqos->phy);
if (ret < 0) {
- error("phy_startup() failed: %d", ret);
+ pr_err("phy_startup() failed: %d", ret);
goto err_shutdown_phy;
}
if (!eqos->phy->link) {
- error("No link");
+ pr_err("No link");
goto err_shutdown_phy;
}
ret = eqos_adjust_link(dev);
if (ret < 0) {
- error("eqos_adjust_link() failed: %d", ret);
+ pr_err("eqos_adjust_link() failed: %d", ret);
goto err_shutdown_phy;
}
@@ -1119,7 +1119,7 @@
err_stop_clks:
eqos_stop_clks_tegra186(dev);
err:
- error("FAILED: %d", ret);
+ pr_err("FAILED: %d", ret);
return ret;
}
@@ -1361,7 +1361,7 @@
ret = reset_get_by_name(dev, "eqos", &eqos->reset_ctl);
if (ret) {
- error("reset_get_by_name(rst) failed: %d", ret);
+ pr_err("reset_get_by_name(rst) failed: %d", ret);
return ret;
}
@@ -1369,38 +1369,38 @@
&eqos->phy_reset_gpio,
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
if (ret) {
- error("gpio_request_by_name(phy reset) failed: %d", ret);
+ pr_err("gpio_request_by_name(phy reset) failed: %d", ret);
goto err_free_reset_eqos;
}
ret = clk_get_by_name(dev, "slave_bus", &eqos->clk_slave_bus);
if (ret) {
- error("clk_get_by_name(slave_bus) failed: %d", ret);
+ pr_err("clk_get_by_name(slave_bus) failed: %d", ret);
goto err_free_gpio_phy_reset;
}
ret = clk_get_by_name(dev, "master_bus", &eqos->clk_master_bus);
if (ret) {
- error("clk_get_by_name(master_bus) failed: %d", ret);
+ pr_err("clk_get_by_name(master_bus) failed: %d", ret);
goto err_free_clk_slave_bus;
}
ret = clk_get_by_name(dev, "rx", &eqos->clk_rx);
if (ret) {
- error("clk_get_by_name(rx) failed: %d", ret);
+ pr_err("clk_get_by_name(rx) failed: %d", ret);
goto err_free_clk_master_bus;
}
ret = clk_get_by_name(dev, "ptp_ref", &eqos->clk_ptp_ref);
if (ret) {
- error("clk_get_by_name(ptp_ref) failed: %d", ret);
+ pr_err("clk_get_by_name(ptp_ref) failed: %d", ret);
goto err_free_clk_rx;
return ret;
}
ret = clk_get_by_name(dev, "tx", &eqos->clk_tx);
if (ret) {
- error("clk_get_by_name(tx) failed: %d", ret);
+ pr_err("clk_get_by_name(tx) failed: %d", ret);
goto err_free_clk_ptp_ref;
}
@@ -1454,7 +1454,7 @@
eqos->regs = devfdt_get_addr(dev);
if (eqos->regs == FDT_ADDR_T_NONE) {
- error("devfdt_get_addr() failed");
+ pr_err("devfdt_get_addr() failed");
return -ENODEV;
}
eqos->mac_regs = (void *)(eqos->regs + EQOS_MAC_REGS_BASE);
@@ -1464,19 +1464,19 @@
ret = eqos_probe_resources_core(dev);
if (ret < 0) {
- error("eqos_probe_resources_core() failed: %d", ret);
+ pr_err("eqos_probe_resources_core() failed: %d", ret);
return ret;
}
ret = eqos_probe_resources_tegra186(dev);
if (ret < 0) {
- error("eqos_probe_resources_tegra186() failed: %d", ret);
+ pr_err("eqos_probe_resources_tegra186() failed: %d", ret);
goto err_remove_resources_core;
}
eqos->mii = mdio_alloc();
if (!eqos->mii) {
- error("mdio_alloc() failed");
+ pr_err("mdio_alloc() failed");
goto err_remove_resources_tegra;
}
eqos->mii->read = eqos_mdio_read;
@@ -1486,7 +1486,7 @@
ret = mdio_register(eqos->mii);
if (ret < 0) {
- error("mdio_register() failed: %d", ret);
+ pr_err("mdio_register() failed: %d", ret);
goto err_free_mdio;
}
diff --git a/drivers/net/ep93xx_eth.c b/drivers/net/ep93xx_eth.c
index a94191b..bc45706 100644
--- a/drivers/net/ep93xx_eth.c
+++ b/drivers/net/ep93xx_eth.c
@@ -324,7 +324,7 @@
debug("reporting %d bytes...\n", len);
} else {
/* Do we have an erroneous packet? */
- error("packet rx error, status %08X %08X",
+ pr_err("packet rx error, status %08X %08X",
priv->rx_sq.current->word1,
priv->rx_sq.current->word2);
dump_rx_descriptor_queue(dev);
@@ -401,7 +401,7 @@
; /* noop */
if (!TX_STATUS_TXWE(priv->tx_sq.current)) {
- error("packet tx error, status %08X",
+ pr_err("packet tx error, status %08X",
priv->tx_sq.current->word1);
dump_tx_descriptor_queue(dev);
dump_tx_status_queue(dev);
@@ -452,7 +452,7 @@
priv = malloc(sizeof(*priv));
if (!priv) {
- error("malloc() failed");
+ pr_err("malloc() failed");
goto eth_init_failed_0;
}
memset(priv, 0, sizeof(*priv));
@@ -462,34 +462,34 @@
priv->tx_dq.base = calloc(NUMTXDESC,
sizeof(struct tx_descriptor));
if (priv->tx_dq.base == NULL) {
- error("calloc() failed");
+ pr_err("calloc() failed");
goto eth_init_failed_1;
}
priv->tx_sq.base = calloc(NUMTXDESC,
sizeof(struct tx_status));
if (priv->tx_sq.base == NULL) {
- error("calloc() failed");
+ pr_err("calloc() failed");
goto eth_init_failed_2;
}
priv->rx_dq.base = calloc(NUMRXDESC,
sizeof(struct rx_descriptor));
if (priv->rx_dq.base == NULL) {
- error("calloc() failed");
+ pr_err("calloc() failed");
goto eth_init_failed_3;
}
priv->rx_sq.base = calloc(NUMRXDESC,
sizeof(struct rx_status));
if (priv->rx_sq.base == NULL) {
- error("calloc() failed");
+ pr_err("calloc() failed");
goto eth_init_failed_4;
}
dev = malloc(sizeof *dev);
if (dev == NULL) {
- error("malloc() failed");
+ pr_err("malloc() failed");
goto eth_init_failed_5;
}
memset(dev, 0, sizeof *dev);
diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c
index 72ef42c..21ccab4 100644
--- a/drivers/net/keystone_net.c
+++ b/drivers/net/keystone_net.c
@@ -757,7 +757,7 @@
qm_init();
if (ksnav_init(priv->netcp_pktdma, &priv->net_rx_buffs)) {
- error("ksnav_init failed\n");
+ pr_err("ksnav_init failed\n");
goto err_knav_init;
}
@@ -773,7 +773,7 @@
phy_startup(priv->phydev);
if (priv->phydev->link == 0) {
- error("phy startup failed\n");
+ pr_err("phy startup failed\n");
goto err_phy_start;
}
}
@@ -923,7 +923,7 @@
*/
mdio_bus = mdio_alloc();
if (!mdio_bus) {
- error("MDIO alloc failed\n");
+ pr_err("MDIO alloc failed\n");
return -ENOMEM;
}
priv->mdio_bus = mdio_bus;
@@ -935,7 +935,7 @@
ret = mdio_register(mdio_bus);
if (ret) {
- error("MDIO bus register failed\n");
+ pr_err("MDIO bus register failed\n");
return ret;
}
} else {
@@ -1011,7 +1011,7 @@
slave_name, offset_to_ofnode(slave),
&sl_dev);
if (ret) {
- error("ks2_net - not able to bind slave interfaces\n");
+ pr_err("ks2_net - not able to bind slave interfaces\n");
return ret;
}
}
@@ -1031,7 +1031,7 @@
ret = device_bind_driver_to_node(dev, "eth_ks2_sl", slave_name,
offset_to_ofnode(slave), &sl_dev);
if (ret) {
- error("ks2_net - not able to bind slave interfaces\n");
+ pr_err("ks2_net - not able to bind slave interfaces\n");
return ret;
}
}
@@ -1074,7 +1074,7 @@
mdio = fdt_parent_offset(fdt, phy);
if (mdio < 0) {
- error("mdio dt not found\n");
+ pr_err("mdio dt not found\n");
return -ENODEV;
}
priv->mdio_base = (void *)fdtdec_get_addr(fdt, mdio, "reg");
diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c
index 7d920d4..b5bd25e 100644
--- a/drivers/pci/pci_tegra.c
+++ b/drivers/pci/pci_tegra.c
@@ -369,7 +369,7 @@
addr = ofnode_get_property(node, "assigned-addresses", &len);
if (!addr) {
- error("property \"assigned-addresses\" not found");
+ pr_err("property \"assigned-addresses\" not found");
return -FDT_ERR_NOTFOUND;
}
@@ -460,7 +460,7 @@
err = ofnode_read_u32_default(node, "nvidia,num-lanes", -1);
if (err < 0) {
- error("failed to parse \"nvidia,num-lanes\" property");
+ pr_err("failed to parse \"nvidia,num-lanes\" property");
return err;
}
@@ -468,7 +468,7 @@
err = ofnode_read_pci_addr(node, 0, "reg", &addr);
if (err < 0) {
- error("failed to parse \"reg\" property");
+ pr_err("failed to parse \"reg\" property");
return err;
}
@@ -491,25 +491,25 @@
err = dev_read_resource(dev, 0, &pcie->pads);
if (err < 0) {
- error("resource \"pads\" not found");
+ pr_err("resource \"pads\" not found");
return err;
}
err = dev_read_resource(dev, 1, &pcie->afi);
if (err < 0) {
- error("resource \"afi\" not found");
+ pr_err("resource \"afi\" not found");
return err;
}
err = dev_read_resource(dev, 2, &pcie->cs);
if (err < 0) {
- error("resource \"cs\" not found");
+ pr_err("resource \"cs\" not found");
return err;
}
err = tegra_pcie_board_init();
if (err < 0) {
- error("tegra_pcie_board_init() failed: err=%d", err);
+ pr_err("tegra_pcie_board_init() failed: err=%d", err);
return err;
}
@@ -518,7 +518,7 @@
if (pcie->phy) {
err = tegra_xusb_phy_prepare(pcie->phy);
if (err < 0) {
- error("failed to prepare PHY: %d", err);
+ pr_err("failed to prepare PHY: %d", err);
return err;
}
}
@@ -530,7 +530,7 @@
err = tegra_pcie_parse_port_info(subnode, &index, &num_lanes);
if (err < 0) {
- error("failed to obtain root port info");
+ pr_err("failed to obtain root port info");
continue;
}
@@ -560,7 +560,7 @@
err = tegra_pcie_get_xbar_config(dev_ofnode(dev), lanes, id,
&pcie->xbar);
if (err < 0) {
- error("invalid lane configuration");
+ pr_err("invalid lane configuration");
return err;
}
@@ -574,31 +574,31 @@
ret = power_domain_on(&pcie->pwrdom);
if (ret) {
- error("power_domain_on() failed: %d\n", ret);
+ pr_err("power_domain_on() failed: %d\n", ret);
return ret;
}
ret = clk_enable(&pcie->clk_afi);
if (ret) {
- error("clk_enable(afi) failed: %d\n", ret);
+ pr_err("clk_enable(afi) failed: %d\n", ret);
return ret;
}
ret = clk_enable(&pcie->clk_pex);
if (ret) {
- error("clk_enable(pex) failed: %d\n", ret);
+ pr_err("clk_enable(pex) failed: %d\n", ret);
return ret;
}
ret = reset_deassert(&pcie->reset_afi);
if (ret) {
- error("reset_deassert(afi) failed: %d\n", ret);
+ pr_err("reset_deassert(afi) failed: %d\n", ret);
return ret;
}
ret = reset_deassert(&pcie->reset_pex);
if (ret) {
- error("reset_deassert(pex) failed: %d\n", ret);
+ pr_err("reset_deassert(pex) failed: %d\n", ret);
return ret;
}
@@ -618,14 +618,14 @@
err = tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
if (err < 0) {
- error("failed to power off PCIe partition: %d", err);
+ pr_err("failed to power off PCIe partition: %d", err);
return err;
}
err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
PERIPH_ID_PCIE);
if (err < 0) {
- error("failed to power up PCIe partition: %d", err);
+ pr_err("failed to power up PCIe partition: %d", err);
return err;
}
@@ -645,7 +645,7 @@
err = tegra_plle_enable();
if (err < 0) {
- error("failed to enable PLLE: %d\n", err);
+ pr_err("failed to enable PLLE: %d\n", err);
return err;
}
@@ -705,7 +705,7 @@
/* wait for the PLL to lock */
err = tegra_pcie_pll_wait(pcie, 500);
if (err < 0) {
- error("PLL failed to lock: %d", err);
+ pr_err("PLL failed to lock: %d", err);
return err;
}
@@ -769,7 +769,7 @@
err = tegra_pcie_phy_enable(pcie);
if (err < 0) {
- error("failed to power on PHY: %d\n", err);
+ pr_err("failed to power on PHY: %d\n", err);
return err;
}
#endif
@@ -778,7 +778,7 @@
#ifdef CONFIG_TEGRA186
err = reset_deassert(&pcie->reset_pcie_x);
if (err) {
- error("reset_deassert(pcie_x) failed: %d\n", err);
+ pr_err("reset_deassert(pcie_x) failed: %d\n", err);
return err;
}
#else
@@ -1143,25 +1143,25 @@
err = tegra_pcie_power_on(pcie);
if (err < 0) {
- error("failed to power on");
+ pr_err("failed to power on");
return err;
}
err = tegra_pcie_enable_controller(pcie);
if (err < 0) {
- error("failed to enable controller");
+ pr_err("failed to enable controller");
return err;
}
err = tegra_pcie_setup_translations(dev);
if (err < 0) {
- error("failed to decode ranges");
+ pr_err("failed to decode ranges");
return err;
}
err = tegra_pcie_enable(pcie);
if (err < 0) {
- error("failed to enable PCIe");
+ pr_err("failed to enable PCIe");
return err;
}
diff --git a/drivers/pci/pcie_xilinx.c b/drivers/pci/pcie_xilinx.c
index 4ba32df..6425825 100644
--- a/drivers/pci/pcie_xilinx.c
+++ b/drivers/pci/pcie_xilinx.c
@@ -187,7 +187,7 @@
err = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg",
0, ®_res);
if (err < 0) {
- error("\"reg\" resource not found\n");
+ pr_err("\"reg\" resource not found\n");
return err;
}
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index 3ac405a..3718788 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -509,7 +509,7 @@
debug("Read from reg = %p - value = 0x%x\n",
hpipe_addr + HPIPE_LANE_STATUS1_REG,
data);
- error("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
+ pr_err("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
ret = 0;
}
}
@@ -633,7 +633,7 @@
if (data != 0) {
debug("Read from reg = %p - value = 0x%x\n",
hpipe_addr + HPIPE_LANE_STATUS1_REG, data);
- error("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
+ pr_err("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
ret = 0;
}
@@ -666,14 +666,14 @@
gd->fdt_blob, sata_node, "marvell,armada-8k-ahci");
if (sata_node == 0) {
- error("SATA node not found in FDT\n");
+ pr_err("SATA node not found in FDT\n");
return 0;
}
sata_base = (void __iomem *)fdtdec_get_addr_size_auto_noparent(
gd->fdt_blob, sata_node, "reg", 0, NULL, true);
if (sata_base == NULL) {
- error("SATA address not found in FDT\n");
+ pr_err("SATA address not found in FDT\n");
return 0;
}
@@ -976,7 +976,7 @@
if (data != 0) {
debug("Read from reg = %p - value = 0x%x\n",
hpipe_addr + HPIPE_LANE_STATUS1_REG, data);
- error("SD_EXTERNAL_STATUS0_PLL_TX is %d, SD_EXTERNAL_STATUS0_PLL_RX is %d\n",
+ pr_err("SD_EXTERNAL_STATUS0_PLL_TX is %d, SD_EXTERNAL_STATUS0_PLL_RX is %d\n",
(data & SD_EXTERNAL_STATUS0_PLL_TX_MASK),
(data & SD_EXTERNAL_STATUS0_PLL_RX_MASK));
ret = 0;
@@ -1099,7 +1099,7 @@
if (data != 0) {
debug("Read from reg = %p - value = 0x%x\n",
sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
- error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
+ pr_err("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
(data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
(data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
ret = 0;
@@ -1117,7 +1117,7 @@
data = polling_with_timeout(addr, data, mask, 100);
if (data != 0) {
debug("Read from reg = %p - value = 0x%x\n", sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
- error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
+ pr_err("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
ret = 0;
}
@@ -1398,7 +1398,7 @@
data = polling_with_timeout(addr, data, mask, 15000);
if (data != 0) {
debug("Read from reg = %p - value = 0x%x\n", sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
- error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
+ pr_err("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
(data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
(data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
ret = 0;
@@ -1418,7 +1418,7 @@
if (data != 0) {
debug("Read from reg = %p - value = 0x%x\n",
sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
- error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
+ pr_err("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
ret = 0;
}
@@ -1577,7 +1577,7 @@
if (data != 0) {
debug("Read from reg = %p - value = 0x%x\n",
sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
- error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
+ pr_err("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
(data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
(data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
ret = 0;
@@ -1596,7 +1596,7 @@
if (data != 0) {
debug("Read from reg = %p - value = 0x%x\n",
sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
- error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
+ pr_err("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
ret = 0;
}
@@ -1742,7 +1742,7 @@
mask = data;
data = polling_with_timeout(addr, data, mask, 100);
if (data != 0) {
- error("Impedance calibration is not done\n");
+ pr_err("Impedance calibration is not done\n");
debug("Read from reg = %p - value = 0x%x\n", addr, data);
ret = 0;
}
@@ -1751,7 +1751,7 @@
mask = data;
data = polling_with_timeout(addr, data, mask, 100);
if (data != 0) {
- error("PLL calibration is not done\n");
+ pr_err("PLL calibration is not done\n");
debug("Read from reg = %p - value = 0x%x\n", addr, data);
ret = 0;
}
@@ -1761,7 +1761,7 @@
mask = data;
data = polling_with_timeout(addr, data, mask, 100);
if (data != 0) {
- error("PLL is not ready\n");
+ pr_err("PLL is not ready\n");
debug("Read from reg = %p - value = 0x%x\n", addr, data);
ret = 0;
}
@@ -1818,7 +1818,7 @@
cp110_utmi_data[i].usb_cfg_addr,
cp110_utmi_data[i].utmi_cfg_addr,
cp110_utmi_data[i].utmi_phy_port)) {
- error("Failed to initialize UTMI PHY %d\n", i);
+ pr_err("Failed to initialize UTMI PHY %d\n", i);
continue;
}
printf("UTMI PHY %d initialized to ", i);
@@ -1864,7 +1864,7 @@
(void __iomem *)fdtdec_get_addr_size_auto_noparent(
gd->fdt_blob, node, "reg", 0, NULL, true);
if (cp110_utmi_data[i].utmi_base_addr == NULL) {
- error("UTMI PHY base address is invalid\n");
+ pr_err("UTMI PHY base address is invalid\n");
i++;
continue;
}
@@ -1874,7 +1874,7 @@
(void __iomem *)fdtdec_get_addr_size_auto_noparent(
gd->fdt_blob, node, "reg", 1, NULL, true);
if (cp110_utmi_data[i].usb_cfg_addr == NULL) {
- error("UTMI PHY base address is invalid\n");
+ pr_err("UTMI PHY base address is invalid\n");
i++;
continue;
}
@@ -1884,7 +1884,7 @@
(void __iomem *)fdtdec_get_addr_size_auto_noparent(
gd->fdt_blob, node, "reg", 2, NULL, true);
if (cp110_utmi_data[i].utmi_cfg_addr == NULL) {
- error("UTMI PHY base address is invalid\n");
+ pr_err("UTMI PHY base address is invalid\n");
i++;
continue;
}
@@ -1896,7 +1896,7 @@
cp110_utmi_data[i].utmi_phy_port = fdtdec_get_int(
gd->fdt_blob, node, "utmi-port", UTMI_PHY_INVALID);
if (cp110_utmi_data[i].utmi_phy_port == UTMI_PHY_INVALID) {
- error("UTMI PHY port type is invalid\n");
+ pr_err("UTMI PHY port type is invalid\n");
i++;
continue;
}
@@ -2049,7 +2049,7 @@
* PHY_TYPE_UNCONNECTED state.
*/
ptr_comphy_map->type = PHY_TYPE_UNCONNECTED;
- error("PLL is not locked - Failed to initialize lane %d\n",
+ pr_err("PLL is not locked - Failed to initialize lane %d\n",
lane);
}
}
diff --git a/drivers/phy/sti_usb_phy.c b/drivers/phy/sti_usb_phy.c
index 0e0b1c0..88fcfbb 100644
--- a/drivers/phy/sti_usb_phy.c
+++ b/drivers/phy/sti_usb_phy.c
@@ -47,13 +47,13 @@
ret = reset_deassert(&phy->global_ctl);
if (ret < 0) {
- error("PHY global deassert failed: %d", ret);
+ pr_err("PHY global deassert failed: %d", ret);
return ret;
}
ret = reset_deassert(&phy->port_ctl);
if (ret < 0)
- error("PHY port deassert failed: %d", ret);
+ pr_err("PHY port deassert failed: %d", ret);
return ret;
}
@@ -85,13 +85,13 @@
ret = reset_assert(&phy->port_ctl);
if (ret < 0) {
- error("PHY port assert failed: %d", ret);
+ pr_err("PHY port assert failed: %d", ret);
return ret;
}
ret = reset_assert(&phy->global_ctl);
if (ret < 0)
- error("PHY global assert failed: %d", ret);
+ pr_err("PHY global assert failed: %d", ret);
return ret;
}
@@ -114,20 +114,20 @@
&syscfg_phandle);
if (ret < 0) {
- error("Can't get syscfg phandle: %d\n", ret);
+ pr_err("Can't get syscfg phandle: %d\n", ret);
return ret;
}
ret = uclass_get_device_by_ofnode(UCLASS_SYSCON, syscfg_phandle.node,
&syscon);
if (ret) {
- error("unable to find syscon device (%d)\n", ret);
+ pr_err("unable to find syscon device (%d)\n", ret);
return ret;
}
priv->regmap = syscon_get_regmap(syscon);
if (!priv->regmap) {
- error("unable to find regmap\n");
+ pr_err("unable to find regmap\n");
return -ENODEV;
}
@@ -137,12 +137,12 @@
ARRAY_SIZE(cells));
if (count < 0) {
- error("Bad PHY st,syscfg property %d\n", count);
+ pr_err("Bad PHY st,syscfg property %d\n", count);
return -EINVAL;
}
if (count > PHYPARAM_NB) {
- error("Unsupported PHY param count %d\n", count);
+ pr_err("Unsupported PHY param count %d\n", count);
return -EINVAL;
}
@@ -152,14 +152,14 @@
/* get global reset control */
ret = reset_get_by_name(dev, "global", &priv->global_ctl);
if (ret) {
- error("can't get global reset for %s (%d)", dev->name, ret);
+ pr_err("can't get global reset for %s (%d)", dev->name, ret);
return ret;
}
/* get port reset control */
ret = reset_get_by_name(dev, "port", &priv->port_ctl);
if (ret) {
- error("can't get port reset for %s (%d)", dev->name, ret);
+ pr_err("can't get port reset for %s (%d)", dev->name, ret);
return ret;
}
diff --git a/drivers/phy/ti-pipe3-phy.c b/drivers/phy/ti-pipe3-phy.c
index 680e32f..babf2ff 100644
--- a/drivers/phy/ti-pipe3-phy.c
+++ b/drivers/phy/ti-pipe3-phy.c
@@ -261,7 +261,7 @@
} while (--timeout);
if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
- error("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
+ pr_err("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
__func__, val);
return -EBUSY;
}
@@ -284,14 +284,14 @@
err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
name, &syscon);
if (err) {
- error("unable to find syscon device for %s (%d)\n",
+ pr_err("unable to find syscon device for %s (%d)\n",
name, err);
return NULL;
}
regmap = syscon_get_regmap(syscon);
if (IS_ERR(regmap)) {
- error("unable to find regmap for %s (%ld)\n",
+ pr_err("unable to find regmap for %s (%ld)\n",
name, PTR_ERR(regmap));
return NULL;
}
@@ -299,7 +299,7 @@
cell = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), name,
&len);
if (len < 2*sizeof(fdt32_t)) {
- error("offset not available for %s\n", name);
+ pr_err("offset not available for %s\n", name);
return NULL;
}
@@ -318,13 +318,13 @@
addr = devfdt_get_addr_size_index(dev, 2, &sz);
if (addr == FDT_ADDR_T_NONE) {
- error("missing pll ctrl address\n");
+ pr_err("missing pll ctrl address\n");
return -EINVAL;
}
pipe3->pll_ctrl_base = map_physmem(addr, sz, MAP_NOCACHE);
if (!pipe3->pll_ctrl_base) {
- error("unable to remap pll ctrl\n");
+ pr_err("unable to remap pll ctrl\n");
return -EINVAL;
}
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index 27165b0..2bf853e 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -578,7 +578,7 @@
info->base = (void __iomem *)devfdt_get_addr(dev);
if (!info->base) {
- error("unable to find regmap\n");
+ pr_err("unable to find regmap\n");
return -ENODEV;
}
diff --git a/drivers/pinctrl/pinctrl-sti.c b/drivers/pinctrl/pinctrl-sti.c
index 40341b4..735e412 100644
--- a/drivers/pinctrl/pinctrl-sti.c
+++ b/drivers/pinctrl/pinctrl-sti.c
@@ -142,7 +142,7 @@
break;
default:
- error("%s invalid direction value: 0x%x\n",
+ pr_err("%s invalid direction value: 0x%x\n",
__func__, pin_desc->dir);
BUG();
break;
@@ -237,14 +237,14 @@
prop_name, "#gpio-cells",
0, 0, &args);
if (ret < 0) {
- error("Can't get the gpio bank phandle: %d\n", ret);
+ pr_err("Can't get the gpio bank phandle: %d\n", ret);
return ret;
}
bank_name = fdt_getprop(blob, args.node, "st,bank-name",
&count);
if (count < 0) {
- error("Can't find bank-name property %d\n", count);
+ pr_err("Can't find bank-name property %d\n", count);
return -EINVAL;
}
@@ -254,12 +254,12 @@
prop_name, cells,
ARRAY_SIZE(cells));
if (count < 0) {
- error("Bad pin configuration array %d\n", count);
+ pr_err("Bad pin configuration array %d\n", count);
return -EINVAL;
}
if (count > MAX_STI_PINCONF_ENTRIES) {
- error("Unsupported pinconf array count %d\n", count);
+ pr_err("Unsupported pinconf array count %d\n", count);
return -EINVAL;
}
@@ -284,13 +284,13 @@
err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
"st,syscfg", &syscon);
if (err) {
- error("unable to find syscon device\n");
+ pr_err("unable to find syscon device\n");
return err;
}
plat->regmap = syscon_get_regmap(syscon);
if (!plat->regmap) {
- error("unable to find regmap\n");
+ pr_err("unable to find regmap\n");
return -ENODEV;
}
diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c
index bf2a86c..51fdfb3 100644
--- a/drivers/pinctrl/pinctrl_stm32.c
+++ b/drivers/pinctrl/pinctrl_stm32.c
@@ -160,7 +160,7 @@
config_node = fdt_node_offset_by_phandle(fdt, phandle);
if (config_node < 0) {
- error("prop pinctrl-0 index %d invalid phandle\n", i);
+ pr_err("prop pinctrl-0 index %d invalid phandle\n", i);
return -EINVAL;
}
diff --git a/drivers/power/pmic/as3722.c b/drivers/power/pmic/as3722.c
index 4efe8ee..3b0427e 100644
--- a/drivers/power/pmic/as3722.c
+++ b/drivers/power/pmic/as3722.c
@@ -46,14 +46,14 @@
ret = pmic_reg_read(dev, AS3722_ASIC_ID1);
if (ret < 0) {
- error("failed to read ID1 register: %d", ret);
+ pr_err("failed to read ID1 register: %d", ret);
return ret;
}
*idp = ret;
ret = pmic_reg_read(dev, AS3722_ASIC_ID2);
if (ret < 0) {
- error("failed to read ID2 register: %d", ret);
+ pr_err("failed to read ID2 register: %d", ret);
return ret;
}
*revisionp = ret;
@@ -71,7 +71,7 @@
ret = pmic_reg_write(dev, AS3722_SD_VOLTAGE(sd), value);
if (ret < 0) {
- error("failed to write SD%u voltage register: %d", sd, ret);
+ pr_err("failed to write SD%u voltage register: %d", sd, ret);
return ret;
}
@@ -87,7 +87,7 @@
ret = pmic_reg_write(dev, AS3722_LDO_VOLTAGE(ldo), value);
if (ret < 0) {
- error("failed to write LDO%u voltage register: %d", ldo,
+ pr_err("failed to write LDO%u voltage register: %d", ldo,
ret);
return ret;
}
@@ -102,12 +102,12 @@
ret = as3722_read_id(dev, &id, &revision);
if (ret < 0) {
- error("failed to read ID: %d", ret);
+ pr_err("failed to read ID: %d", ret);
return ret;
}
if (id != AS3722_DEVICE_ID) {
- error("unknown device");
+ pr_err("unknown device");
return -ENOENT;
}
diff --git a/drivers/power/pmic/as3722_gpio.c b/drivers/power/pmic/as3722_gpio.c
index d0b681c..5cf4cb6 100644
--- a/drivers/power/pmic/as3722_gpio.c
+++ b/drivers/power/pmic/as3722_gpio.c
@@ -26,7 +26,7 @@
err = pmic_reg_write(pmic, AS3722_GPIO_CONTROL(gpio), value);
if (err) {
- error("failed to configure GPIO#%u: %d", gpio, err);
+ pr_err("failed to configure GPIO#%u: %d", gpio, err);
return err;
}
@@ -46,7 +46,7 @@
err = pmic_reg_read(pmic, AS3722_GPIO_SIGNAL_OUT);
if (err < 0) {
- error("failed to read GPIO signal out register: %d", err);
+ pr_err("failed to read GPIO signal out register: %d", err);
return err;
}
value = err;
@@ -61,7 +61,7 @@
err = pmic_reg_write(pmic, AS3722_GPIO_SIGNAL_OUT, value);
if (err) {
- error("failed to set GPIO#%u %s: %d", gpio, l, err);
+ pr_err("failed to set GPIO#%u %s: %d", gpio, l, err);
return err;
}
@@ -84,13 +84,13 @@
err = pmic_reg_write(pmic, AS3722_GPIO_CONTROL(gpio), value);
if (err) {
- error("failed to configure GPIO#%u as output: %d", gpio, err);
+ pr_err("failed to configure GPIO#%u as output: %d", gpio, err);
return err;
}
err = as3722_gpio_set_value(pmic, gpio, value);
if (err < 0) {
- error("failed to set GPIO#%u high: %d", gpio, err);
+ pr_err("failed to set GPIO#%u high: %d", gpio, err);
return err;
}
diff --git a/drivers/power/pmic/i2c_pmic_emul.c b/drivers/power/pmic/i2c_pmic_emul.c
index 2d35d09..38a2a04 100644
--- a/drivers/power/pmic/i2c_pmic_emul.c
+++ b/drivers/power/pmic/i2c_pmic_emul.c
@@ -31,7 +31,7 @@
struct sandbox_i2c_pmic_plat_data *plat = dev_get_platdata(emul);
if (plat->rw_reg + len > SANDBOX_PMIC_REG_COUNT) {
- error("Request exceeds PMIC register range! Max register: %#x",
+ pr_err("Request exceeds PMIC register range! Max register: %#x",
SANDBOX_PMIC_REG_COUNT);
return -EFAULT;
}
@@ -68,7 +68,7 @@
len--;
if (plat->rw_reg + len > SANDBOX_PMIC_REG_COUNT) {
- error("Request exceeds PMIC register range! Max register: %#x",
+ pr_err("Request exceeds PMIC register range! Max register: %#x",
SANDBOX_PMIC_REG_COUNT);
}
@@ -111,7 +111,7 @@
SANDBOX_PMIC_REG_COUNT);
if (!reg_defaults) {
- error("Property \"reg-defaults\" not found for device: %s!",
+ pr_err("Property \"reg-defaults\" not found for device: %s!",
emul->name);
return -EINVAL;
}
diff --git a/drivers/power/pmic/lp873x.c b/drivers/power/pmic/lp873x.c
index f505468..95c2b7e 100644
--- a/drivers/power/pmic/lp873x.c
+++ b/drivers/power/pmic/lp873x.c
@@ -27,7 +27,7 @@
int len)
{
if (dm_i2c_write(dev, reg, buff, len)) {
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return -EIO;
}
@@ -37,7 +37,7 @@
static int lp873x_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
{
if (dm_i2c_read(dev, reg, buff, len)) {
- error("read error from device: %p register: %#x!", dev, reg);
+ pr_err("read error from device: %p register: %#x!", dev, reg);
return -EIO;
}
diff --git a/drivers/power/pmic/lp87565.c b/drivers/power/pmic/lp87565.c
index 782a46c..506769e 100644
--- a/drivers/power/pmic/lp87565.c
+++ b/drivers/power/pmic/lp87565.c
@@ -29,7 +29,7 @@
ret = dm_i2c_write(dev, reg, buff, len);
if (ret)
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return ret;
}
@@ -40,7 +40,7 @@
ret = dm_i2c_read(dev, reg, buff, len);
if (ret)
- error("read error from device: %p register: %#x!", dev, reg);
+ pr_err("read error from device: %p register: %#x!", dev, reg);
return ret;
}
diff --git a/drivers/power/pmic/max77686.c b/drivers/power/pmic/max77686.c
index ceca9f9..b3ed849 100644
--- a/drivers/power/pmic/max77686.c
+++ b/drivers/power/pmic/max77686.c
@@ -31,7 +31,7 @@
int len)
{
if (dm_i2c_write(dev, reg, buff, len)) {
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return -EIO;
}
@@ -41,7 +41,7 @@
static int max77686_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
{
if (dm_i2c_read(dev, reg, buff, len)) {
- error("read error from device: %p register: %#x!", dev, reg);
+ pr_err("read error from device: %p register: %#x!", dev, reg);
return -EIO;
}
diff --git a/drivers/power/pmic/max8997.c b/drivers/power/pmic/max8997.c
index f749d7d..5ebeb8a 100644
--- a/drivers/power/pmic/max8997.c
+++ b/drivers/power/pmic/max8997.c
@@ -26,7 +26,7 @@
ret = dm_i2c_write(dev, reg, buff, len);
if (ret)
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return ret;
}
@@ -37,7 +37,7 @@
ret = dm_i2c_read(dev, reg, buff, len);
if (ret)
- error("read error from device: %p register: %#x!", dev, reg);
+ pr_err("read error from device: %p register: %#x!", dev, reg);
return ret;
}
diff --git a/drivers/power/pmic/max8998.c b/drivers/power/pmic/max8998.c
index 7c4773c..a7e0469 100644
--- a/drivers/power/pmic/max8998.c
+++ b/drivers/power/pmic/max8998.c
@@ -26,7 +26,7 @@
ret = dm_i2c_write(dev, reg, buff, len);
if (ret)
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return ret;
}
@@ -37,7 +37,7 @@
ret = dm_i2c_read(dev, reg, buff, len);
if (ret)
- error("read error from device: %p register: %#x!", dev, reg);
+ pr_err("read error from device: %p register: %#x!", dev, reg);
return ret;
}
diff --git a/drivers/power/pmic/palmas.c b/drivers/power/pmic/palmas.c
index 804c0d1..1e1ecb3 100644
--- a/drivers/power/pmic/palmas.c
+++ b/drivers/power/pmic/palmas.c
@@ -27,7 +27,7 @@
int len)
{
if (dm_i2c_write(dev, reg, buff, len)) {
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return -EIO;
}
@@ -37,7 +37,7 @@
static int palmas_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
{
if (dm_i2c_read(dev, reg, buff, len)) {
- error("read error from device: %p register: %#x!", dev, reg);
+ pr_err("read error from device: %p register: %#x!", dev, reg);
return -EIO;
}
diff --git a/drivers/power/pmic/pfuze100.c b/drivers/power/pmic/pfuze100.c
index 5f361c7..a06cbc0 100644
--- a/drivers/power/pmic/pfuze100.c
+++ b/drivers/power/pmic/pfuze100.c
@@ -33,7 +33,7 @@
int len)
{
if (dm_i2c_write(dev, reg, buff, len)) {
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return -EIO;
}
@@ -43,7 +43,7 @@
static int pfuze100_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
{
if (dm_i2c_read(dev, reg, buff, len)) {
- error("read error from device: %p register: %#x!", dev, reg);
+ pr_err("read error from device: %p register: %#x!", dev, reg);
return -EIO;
}
diff --git a/drivers/power/pmic/s2mps11.c b/drivers/power/pmic/s2mps11.c
index 9d83059..522105e 100644
--- a/drivers/power/pmic/s2mps11.c
+++ b/drivers/power/pmic/s2mps11.c
@@ -27,7 +27,7 @@
ret = dm_i2c_write(dev, reg, buff, len);
if (ret)
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return ret;
}
@@ -38,7 +38,7 @@
ret = dm_i2c_read(dev, reg, buff, len);
if (ret)
- error("read error from device: %p register: %#x!", dev, reg);
+ pr_err("read error from device: %p register: %#x!", dev, reg);
return ret;
}
diff --git a/drivers/power/pmic/s5m8767.c b/drivers/power/pmic/s5m8767.c
index f8ae5ea..3812e24 100644
--- a/drivers/power/pmic/s5m8767.c
+++ b/drivers/power/pmic/s5m8767.c
@@ -30,7 +30,7 @@
int len)
{
if (dm_i2c_write(dev, reg, buff, len)) {
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return -EIO;
}
@@ -40,7 +40,7 @@
static int s5m8767_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
{
if (dm_i2c_read(dev, reg, buff, len)) {
- error("read error from device: %p register: %#x!", dev, reg);
+ pr_err("read error from device: %p register: %#x!", dev, reg);
return -EIO;
}
diff --git a/drivers/power/pmic/sandbox.c b/drivers/power/pmic/sandbox.c
index 6763303..e8d6fac 100644
--- a/drivers/power/pmic/sandbox.c
+++ b/drivers/power/pmic/sandbox.c
@@ -31,7 +31,7 @@
const uint8_t *buff, int len)
{
if (dm_i2c_write(dev, reg, buff, len)) {
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return -EIO;
}
@@ -42,7 +42,7 @@
uint8_t *buff, int len)
{
if (dm_i2c_read(dev, reg, buff, len)) {
- error("read error from device: %p register: %#x!", dev, reg);
+ pr_err("read error from device: %p register: %#x!", dev, reg);
return -EIO;
}
@@ -52,7 +52,7 @@
static int sandbox_pmic_bind(struct udevice *dev)
{
if (!pmic_bind_children(dev, dev_ofnode(dev), pmic_children_info))
- error("%s:%d PMIC: %s - no child found!", __func__, __LINE__,
+ pr_err("%s:%d PMIC: %s - no child found!", __func__, __LINE__,
dev->name);
/* Always return success for this device - allows for PMIC I/O */
diff --git a/drivers/power/pmic/tps65090.c b/drivers/power/pmic/tps65090.c
index 4565e3b..ee5358b 100644
--- a/drivers/power/pmic/tps65090.c
+++ b/drivers/power/pmic/tps65090.c
@@ -29,7 +29,7 @@
int len)
{
if (dm_i2c_write(dev, reg, buff, len)) {
- error("write error to device: %p register: %#x!", dev, reg);
+ pr_err("write error to device: %p register: %#x!", dev, reg);
return -EIO;
}
@@ -42,7 +42,7 @@
ret = dm_i2c_read(dev, reg, buff, len);
if (ret) {
- error("read error %d from device: %p register: %#x!", ret, dev,
+ pr_err("read error %d from device: %p register: %#x!", ret, dev,
reg);
return -EIO;
}
diff --git a/drivers/power/regulator/fixed.c b/drivers/power/regulator/fixed.c
index 35c2922..97b4a98 100644
--- a/drivers/power/regulator/fixed.c
+++ b/drivers/power/regulator/fixed.c
@@ -117,7 +117,7 @@
ret = dm_gpio_set_value(&dev_pdata->gpio, enable);
if (ret) {
- error("Can't set regulator : %s gpio to: %d\n", dev->name,
+ pr_err("Can't set regulator : %s gpio to: %d\n", dev->name,
enable);
return ret;
}
diff --git a/drivers/power/regulator/gpio-regulator.c b/drivers/power/regulator/gpio-regulator.c
index 42391c6..1031a03 100644
--- a/drivers/power/regulator/gpio-regulator.c
+++ b/drivers/power/regulator/gpio-regulator.c
@@ -109,7 +109,7 @@
ret = dm_gpio_set_value(&dev_pdata->gpio, enable);
if (ret) {
- error("Can't set regulator : %s gpio to: %d\n", dev->name,
+ pr_err("Can't set regulator : %s gpio to: %d\n", dev->name,
enable);
return ret;
}
diff --git a/drivers/power/regulator/max77686.c b/drivers/power/regulator/max77686.c
index 8780806..2212d36 100644
--- a/drivers/power/regulator/max77686.c
+++ b/drivers/power/regulator/max77686.c
@@ -98,7 +98,7 @@
if (hex >= 0 && hex <= hex_max)
return hex;
- error("Value: %d uV is wrong for BUCK%d", uV, buck);
+ pr_err("Value: %d uV is wrong for BUCK%d", uV, buck);
return -EINVAL;
}
@@ -134,7 +134,7 @@
return uV;
bad_hex:
- error("Value: %#x is wrong for BUCK%d", hex, buck);
+ pr_err("Value: %#x is wrong for BUCK%d", hex, buck);
return -EINVAL;
}
@@ -160,7 +160,7 @@
if (hex >= 0 && hex <= MAX77686_LDO_VOLT_MAX_HEX)
return hex;
- error("Value: %d uV is wrong for LDO%d", uV, ldo);
+ pr_err("Value: %d uV is wrong for LDO%d", uV, ldo);
return -EINVAL;
}
@@ -189,7 +189,7 @@
return uV;
bad_hex:
- error("Value: %#x is wrong for ldo%d", hex, ldo);
+ pr_err("Value: %#x is wrong for ldo%d", hex, ldo);
return -EINVAL;
}
@@ -328,7 +328,7 @@
ldo = dev->driver_data;
if (ldo < 1 || ldo > MAX77686_LDO_NUM) {
- error("Wrong ldo number: %d", ldo);
+ pr_err("Wrong ldo number: %d", ldo);
return -EINVAL;
}
@@ -366,7 +366,7 @@
buck = dev->driver_data;
if (buck < 1 || buck > MAX77686_BUCK_NUM) {
- error("Wrong buck number: %d", buck);
+ pr_err("Wrong buck number: %d", buck);
return -EINVAL;
}
@@ -423,7 +423,7 @@
ldo = dev->driver_data;
if (ldo < 1 || ldo > MAX77686_LDO_NUM) {
- error("Wrong ldo number: %d", ldo);
+ pr_err("Wrong ldo number: %d", ldo);
return -EINVAL;
}
@@ -493,7 +493,7 @@
}
if (mode == 0xff) {
- error("Wrong mode: %d for ldo%d", *opmode, ldo);
+ pr_err("Wrong mode: %d for ldo%d", *opmode, ldo);
return -EINVAL;
}
@@ -545,7 +545,7 @@
buck = dev->driver_data;
if (buck < 1 || buck > MAX77686_BUCK_NUM) {
- error("Wrong buck number: %d", buck);
+ pr_err("Wrong buck number: %d", buck);
return -EINVAL;
}
@@ -614,7 +614,7 @@
}
if (mode == 0xff) {
- error("Wrong mode: %d for buck: %d\n", *opmode, buck);
+ pr_err("Wrong mode: %d for buck: %d\n", *opmode, buck);
return -EINVAL;
}
diff --git a/drivers/power/regulator/pbias_regulator.c b/drivers/power/regulator/pbias_regulator.c
index 914500b..116b7f4 100644
--- a/drivers/power/regulator/pbias_regulator.c
+++ b/drivers/power/regulator/pbias_regulator.c
@@ -70,14 +70,14 @@
err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
"syscon", &syscon);
if (err) {
- error("%s: unable to find syscon device (%d)\n", __func__,
+ pr_err("%s: unable to find syscon device (%d)\n", __func__,
err);
return err;
}
regmap = syscon_get_regmap(syscon);
if (IS_ERR(regmap)) {
- error("%s: unable to find regmap (%ld)\n", __func__,
+ pr_err("%s: unable to find regmap (%ld)\n", __func__,
PTR_ERR(regmap));
return PTR_ERR(regmap);
}
@@ -85,7 +85,7 @@
err = dev_read_resource(dev, 0, &res);
if (err) {
- error("%s: unable to find offset (%d)\n", __func__, err);
+ pr_err("%s: unable to find offset (%d)\n", __func__, err);
return err;
}
priv->offset = res.start;
diff --git a/drivers/power/regulator/sandbox.c b/drivers/power/regulator/sandbox.c
index 06c09fd..f980a17 100644
--- a/drivers/power/regulator/sandbox.c
+++ b/drivers/power/regulator/sandbox.c
@@ -87,7 +87,7 @@
int ret;
if (dev->driver_data > output_count) {
- error("Unknown regulator number: %lu for PMIC %s!",
+ pr_err("Unknown regulator number: %lu for PMIC %s!",
dev->driver_data, dev->name);
return -EINVAL;
}
@@ -95,7 +95,7 @@
reg = (dev->driver_data - 1) * OUT_REG_COUNT + reg_type;
ret = pmic_read(dev->parent, reg, ®_val, 1);
if (ret) {
- error("PMIC read failed: %d\n", ret);
+ pr_err("PMIC read failed: %d\n", ret);
return ret;
}
@@ -115,14 +115,14 @@
int max_value;
if (dev->driver_data > output_count) {
- error("Unknown regulator number: %lu for PMIC %s!",
+ pr_err("Unknown regulator number: %lu for PMIC %s!",
dev->driver_data, dev->name);
return -EINVAL;
}
max_value = range[dev->driver_data - 1].max;
if (value > max_value) {
- error("Wrong value for %s: %lu. Max is: %d.",
+ pr_err("Wrong value for %s: %lu. Max is: %d.",
dev->name, dev->driver_data, max_value);
return -EINVAL;
}
@@ -134,7 +134,7 @@
reg = (dev->driver_data - 1) * OUT_REG_COUNT + reg_type;
ret = pmic_write(dev->parent, reg, ®_val, 1);
if (ret) {
- error("PMIC write failed: %d\n", ret);
+ pr_err("PMIC write failed: %d\n", ret);
return ret;
}
@@ -154,7 +154,7 @@
reg = (dev->driver_data - 1) * OUT_REG_COUNT + OUT_REG_OM;
ret = pmic_read(dev->parent, reg, ®_val, 1);
if (ret) {
- error("PMIC read failed: %d\n", ret);
+ pr_err("PMIC read failed: %d\n", ret);
return ret;
}
@@ -163,7 +163,7 @@
return uc_pdata->mode[i].id;
}
- error("Unknown operation mode for %s!", dev->name);
+ pr_err("Unknown operation mode for %s!", dev->name);
return -EINVAL;
}
@@ -188,14 +188,14 @@
}
if (reg_val == -1) {
- error("Unknown operation mode for %s!", dev->name);
+ pr_err("Unknown operation mode for %s!", dev->name);
return -EINVAL;
}
reg = (dev->driver_data - 1) * OUT_REG_COUNT + OUT_REG_OM;
ret = pmic_write(dev->parent, reg, (uint8_t *)®_val, 1);
if (ret) {
- error("PMIC write failed: %d\n", ret);
+ pr_err("PMIC write failed: %d\n", ret);
return ret;
}
diff --git a/drivers/ram/rockchip/dmc-rk3368.c b/drivers/ram/rockchip/dmc-rk3368.c
index 7577ff0..bfcb1dd 100644
--- a/drivers/ram/rockchip/dmc-rk3368.c
+++ b/drivers/ram/rockchip/dmc-rk3368.c
@@ -230,7 +230,7 @@
tmp = get_timer(0);
do {
if (get_timer(tmp) > timeout_ms) {
- error("%s: POWER_UP_START did not complete in %ld ms\n",
+ pr_err("%s: POWER_UP_START did not complete in %ld ms\n",
__func__, timeout_ms);
return -ETIME;
}
@@ -422,7 +422,7 @@
tmp = get_timer(0);
do {
if (get_timer(tmp) > timeout_ms) {
- error("%s: DFI init did not complete within %ld ms\n",
+ pr_err("%s: DFI init did not complete within %ld ms\n",
__func__, timeout_ms);
return -ETIME;
}
@@ -457,7 +457,7 @@
u32 tfaw_as_ps;
if (params->ddr_speed_bin != DDR3_1600K) {
- error("%s: unimplemented DDR3 speed bin %d\n",
+ pr_err("%s: unimplemented DDR3 speed bin %d\n",
__func__, params->ddr_speed_bin);
return -1;
}
@@ -585,7 +585,7 @@
tmp = get_timer(0);
do {
if (get_timer(tmp) > timeout_ms) {
- error("%s: did not complete within %ld ms\n",
+ pr_err("%s: did not complete within %ld ms\n",
__func__, timeout_ms);
return -ETIME;
}
@@ -625,7 +625,7 @@
}
if (col == 8) {
- error("%s: col detect error\n", __func__);
+ pr_err("%s: col detect error\n", __func__);
return -EINVAL;
}
@@ -644,7 +644,7 @@
}
if (row == 11) {
- error("%s: row detect error\n", __func__);
+ pr_err("%s: row detect error\n", __func__);
return -EINVAL;
}
@@ -764,7 +764,7 @@
}
}
- error("%s: ddrconf (NIU config) not found\n", __func__);
+ pr_err("%s: ddrconf (NIU config) not found\n", __func__);
return -EINVAL;
}
diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index 5ed4b03..76c1fe8 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -551,7 +551,7 @@
tmp = get_timer(0);
do {
if (get_timer(tmp) > timeout_ms) {
- error("DRAM (%s): phy failed to lock within %ld ms\n",
+ pr_err("DRAM (%s): phy failed to lock within %ld ms\n",
__func__, timeout_ms);
return -ETIME;
}
diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
index b1b0289..fdf088e 100644
--- a/drivers/ram/stm32_sdram.c
+++ b/drivers/ram/stm32_sdram.c
@@ -262,7 +262,7 @@
bank_name = (char *)ofnode_get_name(bank_node);
strsep(&bank_name, "@");
if (!bank_name) {
- error("missing sdram bank index");
+ pr_err("missing sdram bank index");
return -EINVAL;
}
@@ -271,7 +271,7 @@
(long unsigned int *)&bank_params->target_bank);
if (bank_params->target_bank >= MAX_SDRAM_BANK) {
- error("Found bank %d , but only bank 0 and 1 are supported",
+ pr_err("Found bank %d , but only bank 0 and 1 are supported",
bank_params->target_bank);
return -EINVAL;
}
@@ -285,7 +285,7 @@
sizeof(struct stm32_sdram_control));
if (!params->bank_params[bank].sdram_control) {
- error("st,sdram-control not found for %s",
+ pr_err("st,sdram-control not found for %s",
ofnode_get_name(bank_node));
return -EINVAL;
}
@@ -298,7 +298,7 @@
sizeof(struct stm32_sdram_timing));
if (!params->bank_params[bank].sdram_timing) {
- error("st,sdram-timing not found for %s",
+ pr_err("st,sdram-timing not found for %s",
ofnode_get_name(bank_node));
return -EINVAL;
}
diff --git a/drivers/reset/sti-reset.c b/drivers/reset/sti-reset.c
index a79708c..024b996 100644
--- a/drivers/reset/sti-reset.c
+++ b/drivers/reset/sti-reset.c
@@ -201,20 +201,20 @@
node = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
compatible);
if (node < 0) {
- error("unable to find %s node\n", compatible);
+ pr_err("unable to find %s node\n", compatible);
return node;
}
ret = uclass_get_device_by_of_offset(UCLASS_SYSCON, node, &syscon);
if (ret) {
- error("%s: uclass_get_device_by_of_offset failed: %d\n",
+ pr_err("%s: uclass_get_device_by_of_offset failed: %d\n",
__func__, ret);
return ret;
}
regmap = syscon_get_regmap(syscon);
if (!regmap) {
- error("unable to get regmap for %s\n", syscon->name);
+ pr_err("unable to get regmap for %s\n", syscon->name);
return -ENODEV;
}
@@ -251,7 +251,7 @@
if (ch->deassert_cnt > 0)
return 0;
} else
- error("Reset balancing error: reset_ctl=%p dev=%p id=%lu\n",
+ pr_err("Reset balancing error: reset_ctl=%p dev=%p id=%lu\n",
reset_ctl, reset_ctl->dev, reset_ctl->id);
}
@@ -268,7 +268,7 @@
reg = (void __iomem *)base + ch->ack_offset;
if (wait_for_bit(__func__, reg, BIT(ch->ack_bit), ctrl_val,
1000, false)) {
- error("Stuck on waiting ack reset_ctl=%p dev=%p id=%lu\n",
+ pr_err("Stuck on waiting ack reset_ctl=%p dev=%p id=%lu\n",
reset_ctl, reset_ctl->dev, reset_ctl->id);
return -ETIMEDOUT;
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index e2f8342..228e714 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -474,7 +474,7 @@
ret = gpio_request_list_by_name(bus, "cs-gpios", priv->cs_gpios,
ARRAY_SIZE(priv->cs_gpios), 0);
if (ret < 0) {
- error("Can't get %s gpios! Error: %d", bus->name, ret);
+ pr_err("Can't get %s gpios! Error: %d", bus->name, ret);
return ret;
}
diff --git a/drivers/spi/lpc32xx_ssp.c b/drivers/spi/lpc32xx_ssp.c
index c5b766c..e2a593b 100644
--- a/drivers/spi/lpc32xx_ssp.c
+++ b/drivers/spi/lpc32xx_ssp.c
@@ -66,17 +66,17 @@
/* we only set up SSP0 for now, so ignore bus */
if (mode & SPI_3WIRE) {
- error("3-wire mode not supported");
+ pr_err("3-wire mode not supported");
return NULL;
}
if (mode & SPI_SLAVE) {
- error("slave mode not supported\n");
+ pr_err("slave mode not supported\n");
return NULL;
}
if (mode & SPI_PREAMBLE) {
- error("preamble byte skipping not supported\n");
+ pr_err("preamble byte skipping not supported\n");
return NULL;
}
diff --git a/drivers/sysreset/sysreset_sti.c b/drivers/sysreset/sysreset_sti.c
index 9b58aa8..bf698a7 100644
--- a/drivers/sysreset/sysreset_sti.c
+++ b/drivers/sysreset/sysreset_sti.c
@@ -39,7 +39,7 @@
"st,syscfg", NULL, 0, 0,
&syscfg_phandle);
if (ret < 0) {
- error("Can't get syscfg phandle: %d\n", ret);
+ pr_err("Can't get syscfg phandle: %d\n", ret);
return ret;
}
@@ -47,14 +47,14 @@
syscfg_phandle.node,
&syscon);
if (ret) {
- error("%s: uclass_get_device_by_of_offset failed: %d\n",
+ pr_err("%s: uclass_get_device_by_of_offset failed: %d\n",
__func__, ret);
return ret;
}
regmap = syscon_get_regmap(syscon);
if (!regmap) {
- error("unable to get regmap for %s\n", syscon->name);
+ pr_err("unable to get regmap for %s\n", syscon->name);
return -ENODEV;
}
diff --git a/drivers/sysreset/sysreset_syscon.c b/drivers/sysreset/sysreset_syscon.c
index 3818fae..3abce7f 100644
--- a/drivers/sysreset/sysreset_syscon.c
+++ b/drivers/sysreset/sysreset_syscon.c
@@ -45,13 +45,13 @@
err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
"regmap", &syscon);
if (err) {
- error("unable to find syscon device\n");
+ pr_err("unable to find syscon device\n");
return err;
}
priv->regmap = syscon_get_regmap(syscon);
if (!priv->regmap) {
- error("unable to find regmap\n");
+ pr_err("unable to find regmap\n");
return -ENODEV;
}
diff --git a/drivers/sysreset/sysreset_watchdog.c b/drivers/sysreset/sysreset_watchdog.c
index 304ed05..ab250ae 100644
--- a/drivers/sysreset/sysreset_watchdog.c
+++ b/drivers/sysreset/sysreset_watchdog.c
@@ -38,7 +38,7 @@
err = uclass_get_device_by_phandle(UCLASS_WDT, dev,
"wdt", &priv->wdt);
if (err) {
- error("unable to find wdt device\n");
+ pr_err("unable to find wdt device\n");
return err;
}
diff --git a/drivers/tpm/tpm_tis_infineon.c b/drivers/tpm/tpm_tis_infineon.c
index ef3ff0d..e3e20d8 100644
--- a/drivers/tpm/tpm_tis_infineon.c
+++ b/drivers/tpm/tpm_tis_infineon.c
@@ -539,7 +539,7 @@
}
if (chip->chip_type != UNKNOWN && vendor != expected_did_vid) {
- error("Vendor id did not match! ID was %08x\n", vendor);
+ pr_err("Vendor id did not match! ID was %08x\n", vendor);
return -ENODEV;
}
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index 35c2dc1..e8432bb 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -28,7 +28,7 @@
dr_mode = fdt_getprop(fdt, node, "dr_mode", NULL);
if (!dr_mode) {
- error("usb dr_mode not found\n");
+ pr_err("usb dr_mode not found\n");
return USB_DR_MODE_UNKNOWN;
}
diff --git a/drivers/usb/eth/mcs7830.c b/drivers/usb/eth/mcs7830.c
index 4abef5d..941d612 100644
--- a/drivers/usb/eth/mcs7830.c
+++ b/drivers/usb/eth/mcs7830.c
@@ -418,25 +418,25 @@
rc = mcs7830_set_autoneg(udev);
if (rc < 0) {
- error("setting autoneg failed\n");
+ pr_err("setting autoneg failed\n");
return rc;
}
rc = mcs7830_write_mchash(udev, priv);
if (rc < 0) {
- error("failed to set multicast hash\n");
+ pr_err("failed to set multicast hash\n");
return rc;
}
rc = mcs7830_write_config(udev, priv);
if (rc < 0) {
- error("failed to set configuration\n");
+ pr_err("failed to set configuration\n");
return rc;
}
rc = mcs7830_apply_fixup(udev);
if (rc < 0) {
- error("fixup application failed\n");
+ pr_err("fixup application failed\n");
return rc;
}
@@ -541,11 +541,11 @@
debug("%s() RX want len %d, got len %d, rc %d\n",
__func__, wantlen, gotlen, rc);
if (rc != 0) {
- error("RX: failed to receive\n");
+ pr_err("RX: failed to receive\n");
return rc;
}
if (gotlen > wantlen) {
- error("RX: got too many bytes (%d)\n", gotlen);
+ pr_err("RX: got too many bytes (%d)\n", gotlen);
return -EIO;
}
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 9df6d32..ad2f606 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1456,7 +1456,7 @@
ret = driver->bind(&udc->gadget);
if (ret) {
- error("driver->bind() returned %d\n", ret);
+ pr_err("driver->bind() returned %d\n", ret);
udc->driver = NULL;
}
@@ -1468,7 +1468,7 @@
struct at91_udc *udc = controller;
if (!driver || !driver->unbind || !driver->disconnect) {
- error("bad paramter\n");
+ pr_err("bad paramter\n");
return -EINVAL;
}
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index ad31703..c0a95a9 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1228,7 +1228,7 @@
ret = driver->bind(&udc->gadget);
if (ret) {
- error("driver->bind() returned %d\n", ret);
+ pr_err("driver->bind() returned %d\n", ret);
udc->driver = NULL;
}
@@ -1240,7 +1240,7 @@
struct usba_udc *udc = &controller;
if (!driver || !driver->unbind || !driver->disconnect) {
- error("bad paramter\n");
+ pr_err("bad paramter\n");
return -EINVAL;
}
@@ -1261,7 +1261,7 @@
eps = malloc(sizeof(struct usba_ep) * pdata->num_ep);
if (!eps) {
- error("failed to alloc eps\n");
+ pr_err("failed to alloc eps\n");
return NULL;
}
diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c
index cb44374..088811c 100644
--- a/drivers/usb/gadget/dwc2_udc_otg.c
+++ b/drivers/usb/gadget/dwc2_udc_otg.c
@@ -835,7 +835,7 @@
ROUND(sizeof(struct usb_ctrlrequest),
CONFIG_SYS_CACHELINE_SIZE));
if (!usb_ctrl) {
- error("No memory available for UDC!\n");
+ pr_err("No memory available for UDC!\n");
return -ENOMEM;
}
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 2cf5c8d..2e0ff45 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1059,7 +1059,7 @@
&& dev->config
&& dev->tx_qlen != 0) {
/* tx fifo is full, but we can't clear it...*/
- error("can't change configurations");
+ pr_err("can't change configurations");
return -ESPIPE;
}
eth_reset_config(dev);
@@ -1233,7 +1233,7 @@
/* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
status = rndis_msg_parser(dev->rndis_config, (u8 *) req->buf);
if (status < 0)
- error("%s: rndis parse error %d", __func__, status);
+ pr_err("%s: rndis parse error %d", __func__, status);
}
#endif /* RNDIS */
@@ -1554,7 +1554,7 @@
retval = usb_ep_queue(dev->out_ep, req, gfp_flags);
if (retval)
- error("rx submit --> %d", retval);
+ pr_err("rx submit --> %d", retval);
return retval;
}
@@ -1624,7 +1624,7 @@
fail2:
usb_ep_free_request(dev->in_ep, dev->tx_req);
fail1:
- error("can't alloc requests");
+ pr_err("can't alloc requests");
return -1;
}
@@ -2060,7 +2060,7 @@
* anything less functional on CDC-capable hardware,
* so we fail in this case.
*/
- error("controller '%s' not recognized",
+ pr_err("controller '%s' not recognized",
gadget->name);
return -ENODEV;
}
@@ -2121,7 +2121,7 @@
in_ep = usb_ep_autoconfig(gadget, &fs_source_desc);
if (!in_ep) {
autoconf_fail:
- error("can't autoconfigure on %s\n",
+ pr_err("can't autoconfigure on %s\n",
gadget->name);
return -ENODEV;
}
@@ -2142,7 +2142,7 @@
if (status_ep) {
status_ep->driver_data = status_ep; /* claim */
} else if (rndis) {
- error("can't run RNDIS on %s", gadget->name);
+ pr_err("can't run RNDIS on %s", gadget->name);
return -ENODEV;
#ifdef CONFIG_USB_ETH_CDC
} else if (cdc) {
@@ -2244,7 +2244,7 @@
if (rndis) {
status = rndis_init();
if (status < 0) {
- error("can't init RNDIS, %d", status);
+ pr_err("can't init RNDIS, %d", status);
goto fail;
}
}
@@ -2335,7 +2335,7 @@
return 0;
fail:
- error("%s failed, status = %d", __func__, status);
+ pr_err("%s failed, status = %d", __func__, status);
eth_unbind(gadget);
return status;
}
@@ -2350,7 +2350,7 @@
ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &dev);
if (!dev || ret) {
- error("No USB device found\n");
+ pr_err("No USB device found\n");
return -ENODEV;
}
@@ -2369,7 +2369,7 @@
#ifdef CONFIG_DM_USB
if (dm_usb_init(dev)) {
- error("USB ether not found\n");
+ pr_err("USB ether not found\n");
return -ENODEV;
}
#else
@@ -2393,11 +2393,11 @@
sizeof(host_addr));
if (!is_eth_addr_valid(dev_addr)) {
- error("Need valid 'usbnet_devaddr' to be set");
+ pr_err("Need valid 'usbnet_devaddr' to be set");
goto fail;
}
if (!is_eth_addr_valid(host_addr)) {
- error("Need valid 'usbnet_hostaddr' to be set");
+ pr_err("Need valid 'usbnet_hostaddr' to be set");
goto fail;
}
@@ -2427,7 +2427,7 @@
while (!dev->network_started) {
/* Handle control-c and timeouts */
if (ctrlc() || (get_timer(ts) > timeout)) {
- error("The remote end did not respond in time.");
+ pr_err("The remote end did not respond in time.");
goto fail;
}
usb_gadget_handle_interrupts(0);
@@ -2456,7 +2456,7 @@
rndis_pkt = malloc(length +
sizeof(struct rndis_packet_msg_type));
if (!rndis_pkt) {
- error("No memory to alloc RNDIS packet");
+ pr_err("No memory to alloc RNDIS packet");
goto drop;
}
rndis_add_hdr(rndis_pkt, length);
@@ -2574,7 +2574,7 @@
ret = _usb_eth_recv(priv);
if (ret) {
- error("error packet receive\n");
+ pr_err("error packet receive\n");
return ret;
}
@@ -2585,7 +2585,7 @@
net_process_received_packet(net_rx_packets[0],
dev->rx_req->length);
} else {
- error("dev->rx_req invalid");
+ pr_err("dev->rx_req invalid");
}
packet_received = 0;
rx_submit(dev, dev->rx_req, 0);
@@ -2641,7 +2641,7 @@
ret = _usb_eth_recv(priv);
if (ret) {
- error("error packet receive\n");
+ pr_err("error packet receive\n");
return ret;
}
@@ -2650,7 +2650,7 @@
*packetp = (uchar *)net_rx_packets[0];
return ethdev->rx_req->length;
} else {
- error("dev->rx_req invalid");
+ pr_err("dev->rx_req invalid");
return -EFAULT;
}
}
@@ -2706,13 +2706,13 @@
ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &usb_dev);
if (!usb_dev || ret) {
- error("No USB device found\n");
+ pr_err("No USB device found\n");
return ret;
}
ret = device_bind_driver(usb_dev, "usb_ether", "usb_ether", &dev);
if (!dev || ret) {
- error("usb - not able to bind usb_ether device\n");
+ pr_err("usb - not able to bind usb_ether device\n");
return ret;
}
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index f3382a9..7acffb6 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -410,7 +410,7 @@
strsep(&cmd, ":");
if (!cmd) {
- error("missing variable");
+ pr_err("missing variable");
fastboot_tx_write_str("FAILmissing var");
return;
}
@@ -593,7 +593,7 @@
strsep(&cmd, ":");
if (!cmd) {
- error("missing partition name");
+ pr_err("missing partition name");
fastboot_tx_write_str("FAILmissing partition name");
return;
}
@@ -645,7 +645,7 @@
strsep(&cmd, ":");
if (!cmd) {
- error("missing partition name");
+ pr_err("missing partition name");
fastboot_tx_write_str("FAILmissing partition name");
return;
}
@@ -718,7 +718,7 @@
}
if (!func_cb) {
- error("unknown command: %.*s", req->actual, cmdbuf);
+ pr_err("unknown command: %.*s", req->actual, cmdbuf);
fastboot_tx_write_str("FAILunknown command");
} else {
if (req->actual < req->length) {
@@ -726,7 +726,7 @@
buf[req->actual] = 0;
func_cb(ep, req);
} else {
- error("buffer overflow");
+ pr_err("buffer overflow");
fastboot_tx_write_str("FAILbuffer overflow");
}
}
diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c
index 0fae66b..fd3da92 100644
--- a/drivers/usb/gadget/f_sdp.c
+++ b/drivers/usb/gadget/f_sdp.c
@@ -237,12 +237,12 @@
u8 report = data[0];
if (status != 0) {
- error("Status: %d", status);
+ pr_err("Status: %d", status);
return;
}
if (report != 1) {
- error("Unexpected report %d", report);
+ pr_err("Unexpected report %d", report);
return;
}
@@ -309,7 +309,7 @@
sdp->next_state = SDP_STATE_IDLE;
break;
default:
- error("Unknown command: %04x\n", be16_to_cpu(cmd->cmd));
+ pr_err("Unknown command: %04x\n", be16_to_cpu(cmd->cmd));
}
}
@@ -322,12 +322,12 @@
int datalen = req->length - 1;
if (status != 0) {
- error("Status: %d", status);
+ pr_err("Status: %d", status);
return;
}
if (report != 2) {
- error("Unexpected report %d", report);
+ pr_err("Unexpected report %d", report);
return;
}
@@ -360,7 +360,7 @@
sdp->state = SDP_STATE_TX_SEC_CONF;
break;
default:
- error("Invalid state: %d", sdp->state);
+ pr_err("Invalid state: %d", sdp->state);
}
}
@@ -370,7 +370,7 @@
int status = req->status;
if (status != 0) {
- error("Status: %d", status);
+ pr_err("Status: %d", status);
return;
}
@@ -393,7 +393,7 @@
sdp->state = SDP_STATE_IDLE;
break;
default:
- error("Wrong State: %d", sdp->state);
+ pr_err("Wrong State: %d", sdp->state);
sdp->state = SDP_STATE_IDLE;
break;
}
diff --git a/drivers/usb/gadget/f_thor.c b/drivers/usb/gadget/f_thor.c
index cd4d9e6..18f233a 100644
--- a/drivers/usb/gadget/f_thor.c
+++ b/drivers/usb/gadget/f_thor.c
@@ -174,7 +174,7 @@
transfer_buffer, THOR_STORE_UNIT_SIZE,
(*cnt)++);
if (ret) {
- error("DFU write failed [%d] cnt: %d",
+ pr_err("DFU write failed [%d] cnt: %d",
ret, *cnt);
return ret;
}
@@ -218,20 +218,20 @@
dfu_entity = dfu_get_entity(alt_setting_num);
if (!dfu_entity) {
- error("Alt setting: %d entity not found!\n", alt_setting_num);
+ pr_err("Alt setting: %d entity not found!\n", alt_setting_num);
return -ENOENT;
}
transfer_buffer = dfu_get_buf(dfu_entity);
if (!transfer_buffer) {
- error("Transfer buffer not allocated!");
+ pr_err("Transfer buffer not allocated!");
return -ENXIO;
}
if (left) {
ret = dfu_write(dfu_entity, transfer_buffer, left, cnt++);
if (ret) {
- error("DFU write failed [%d]: left: %llu", ret, left);
+ pr_err("DFU write failed [%d]: left: %llu", ret, left);
return ret;
}
}
@@ -245,7 +245,7 @@
*/
ret = dfu_flush(dfu_entity, transfer_buffer, 0, cnt);
if (ret)
- error("DFU flush failed!");
+ pr_err("DFU flush failed!");
return ret;
}
@@ -285,7 +285,7 @@
alt_setting_num = dfu_get_alt(f_name);
if (alt_setting_num < 0) {
- error("Alt setting [%d] to write not found!",
+ pr_err("Alt setting [%d] to write not found!",
alt_setting_num);
rsp->ack = -ENODEV;
ret = rsp->ack;
@@ -311,7 +311,7 @@
debug("DL EXIT\n");
break;
default:
- error("Operation not supported: %d", rqt->rqt_data);
+ pr_err("Operation not supported: %d", rqt->rqt_data);
ret = -ENOTSUPP;
}
@@ -342,7 +342,7 @@
puts("RQT: UPLOAD not supported!\n");
break;
default:
- error("unknown request (%d)", rqt->rqt);
+ pr_err("unknown request (%d)", rqt->rqt);
}
return ret;
@@ -541,7 +541,7 @@
status = usb_ep_queue(dev->out_ep, dev->out_req, 0);
if (status) {
- error("kill %s: resubmit %d bytes --> %d",
+ pr_err("kill %s: resubmit %d bytes --> %d",
dev->out_ep->name, dev->out_req->length, status);
usb_ep_set_halt(dev->out_ep);
return -EAGAIN;
@@ -575,7 +575,7 @@
status = usb_ep_queue(dev->in_ep, dev->in_req, 0);
if (status) {
- error("kill %s: resubmit %d bytes --> %d",
+ pr_err("kill %s: resubmit %d bytes --> %d",
dev->in_ep->name, dev->in_req->length, status);
usb_ep_set_halt(dev->in_ep);
}
@@ -608,7 +608,7 @@
case -ESHUTDOWN: /* disconnect from host */
case -EREMOTEIO: /* short read */
case -EOVERFLOW:
- error("ERROR:%d", status);
+ pr_err("ERROR:%d", status);
break;
}
@@ -664,7 +664,7 @@
break;
default:
- error("thor_setup: unknown request: %d", ctrl->bRequest);
+ pr_err("thor_setup: unknown request: %d", ctrl->bRequest);
}
if (value >= 0) {
@@ -973,7 +973,7 @@
debug("Communication Data interface\n");
result = thor_eps_setup(f);
if (result)
- error("%s: EPs setup failed!", __func__);
+ pr_err("%s: EPs setup failed!", __func__);
dev->configuration_done = 1;
break;
}
diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index 0ed72d5..1293e18 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -179,7 +179,7 @@
ret = regulator_set_enable(vbus_supply, true);
if (ret) {
- error("Error enabling vbus supply\n");
+ pr_err("Error enabling vbus supply\n");
return ret;
}
diff --git a/drivers/usb/host/dwc3-sti-glue.c b/drivers/usb/host/dwc3-sti-glue.c
index 02ad311..6dc656a 100644
--- a/drivers/usb/host/dwc3-sti-glue.c
+++ b/drivers/usb/host/dwc3-sti-glue.c
@@ -71,7 +71,7 @@
break;
default:
- error("Unsupported mode of operation %d\n", plat->mode);
+ pr_err("Unsupported mode of operation %d\n", plat->mode);
return -EINVAL;
}
writel(val, plat->syscfg_base + plat->syscfg_offset);
@@ -113,7 +113,7 @@
ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
"reg", reg, ARRAY_SIZE(reg));
if (ret) {
- error("unable to find st,stih407-dwc3 reg property(%d)\n", ret);
+ pr_err("unable to find st,stih407-dwc3 reg property(%d)\n", ret);
return ret;
}
@@ -124,14 +124,14 @@
ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "st,syscfg",
&syscon);
if (ret) {
- error("unable to find syscon device (%d)\n", ret);
+ pr_err("unable to find syscon device (%d)\n", ret);
return ret;
}
/* get syscfg-reg base address */
regmap = syscon_get_regmap(syscon);
if (!regmap) {
- error("unable to find regmap\n");
+ pr_err("unable to find regmap\n");
return -ENODEV;
}
plat->syscfg_base = regmap->base;
@@ -139,14 +139,14 @@
/* get powerdown reset */
ret = reset_get_by_name(dev, "powerdown", &plat->powerdown_ctl);
if (ret) {
- error("can't get powerdown reset for %s (%d)", dev->name, ret);
+ pr_err("can't get powerdown reset for %s (%d)", dev->name, ret);
return ret;
}
/* get softreset reset */
ret = reset_get_by_name(dev, "softreset", &plat->softreset_ctl);
if (ret)
- error("can't get soft reset for %s (%d)", dev->name, ret);
+ pr_err("can't get soft reset for %s (%d)", dev->name, ret);
return ret;
};
@@ -159,14 +159,14 @@
/* check if one subnode is present */
dwc3_node = fdt_first_subnode(gd->fdt_blob, dev_of_offset(dev));
if (dwc3_node <= 0) {
- error("Can't find subnode for %s\n", dev->name);
+ pr_err("Can't find subnode for %s\n", dev->name);
return -ENODEV;
}
/* check if the subnode compatible string is the dwc3 one*/
if (fdt_node_check_compatible(gd->fdt_blob, dwc3_node,
"snps,dwc3") != 0) {
- error("Can't find dwc3 subnode for %s\n", dev->name);
+ pr_err("Can't find dwc3 subnode for %s\n", dev->name);
return -ENODEV;
}
@@ -187,13 +187,13 @@
/* deassert both powerdown and softreset */
ret = reset_deassert(&plat->powerdown_ctl);
if (ret < 0) {
- error("DWC3 powerdown reset deassert failed: %d", ret);
+ pr_err("DWC3 powerdown reset deassert failed: %d", ret);
return ret;
}
ret = reset_deassert(&plat->softreset_ctl);
if (ret < 0) {
- error("DWC3 soft reset deassert failed: %d", ret);
+ pr_err("DWC3 soft reset deassert failed: %d", ret);
goto softreset_err;
}
@@ -208,14 +208,14 @@
init_err:
ret = reset_assert(&plat->softreset_ctl);
if (ret < 0) {
- error("DWC3 soft reset deassert failed: %d", ret);
+ pr_err("DWC3 soft reset deassert failed: %d", ret);
return ret;
}
softreset_err:
ret = reset_assert(&plat->powerdown_ctl);
if (ret < 0)
- error("DWC3 powerdown reset deassert failed: %d", ret);
+ pr_err("DWC3 powerdown reset deassert failed: %d", ret);
return ret;
}
@@ -228,13 +228,13 @@
/* assert both powerdown and softreset */
ret = reset_assert(&plat->powerdown_ctl);
if (ret < 0) {
- error("DWC3 powerdown reset deassert failed: %d", ret);
+ pr_err("DWC3 powerdown reset deassert failed: %d", ret);
return ret;
}
ret = reset_assert(&plat->softreset_ctl);
if (ret < 0)
- error("DWC3 soft reset deassert failed: %d", ret);
+ pr_err("DWC3 soft reset deassert failed: %d", ret);
return ret;
}
diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c
index 18e1e0e..1cb92c0 100644
--- a/drivers/usb/host/ehci-generic.c
+++ b/drivers/usb/host/ehci-generic.c
@@ -51,7 +51,7 @@
break;
err = clk_enable(&priv->clocks[i]);
if (err) {
- error("failed to enable clock %d\n", i);
+ pr_err("failed to enable clock %d\n", i);
clk_free(&priv->clocks[i]);
goto clk_err;
}
@@ -59,7 +59,7 @@
}
} else {
if (clock_nb != -ENOENT) {
- error("failed to get clock phandle(%d)\n", clock_nb);
+ pr_err("failed to get clock phandle(%d)\n", clock_nb);
return clock_nb;
}
}
@@ -80,7 +80,7 @@
break;
if (reset_deassert(&priv->resets[i])) {
- error("failed to deassert reset %d\n", i);
+ pr_err("failed to deassert reset %d\n", i);
reset_free(&priv->resets[i]);
goto reset_err;
}
@@ -88,7 +88,7 @@
}
} else {
if (reset_nb != -ENOENT) {
- error("failed to get reset phandle(%d)\n", reset_nb);
+ pr_err("failed to get reset phandle(%d)\n", reset_nb);
goto clk_err;
}
}
@@ -96,14 +96,14 @@
err = generic_phy_get_by_index(dev, 0, &priv->phy);
if (err) {
if (err != -ENOENT) {
- error("failed to get usb phy\n");
+ pr_err("failed to get usb phy\n");
goto reset_err;
}
} else {
err = generic_phy_init(&priv->phy);
if (err) {
- error("failed to init usb phy\n");
+ pr_err("failed to init usb phy\n");
goto reset_err;
}
}
@@ -122,17 +122,17 @@
if (generic_phy_valid(&priv->phy)) {
ret = generic_phy_exit(&priv->phy);
if (ret)
- error("failed to release phy\n");
+ pr_err("failed to release phy\n");
}
reset_err:
ret = reset_release_all(priv->resets, priv->reset_count);
if (ret)
- error("failed to assert all resets\n");
+ pr_err("failed to assert all resets\n");
clk_err:
ret = clk_release_all(priv->clocks, priv->clock_count);
if (ret)
- error("failed to disable all clocks\n");
+ pr_err("failed to disable all clocks\n");
return err;
}
diff --git a/drivers/usb/host/ohci-generic.c b/drivers/usb/host/ohci-generic.c
index e22ee97..bf55a71 100644
--- a/drivers/usb/host/ohci-generic.c
+++ b/drivers/usb/host/ohci-generic.c
@@ -47,14 +47,14 @@
err = clk_enable(&priv->clocks[i]);
if (err) {
- error("failed to enable clock %d\n", i);
+ pr_err("failed to enable clock %d\n", i);
clk_free(&priv->clocks[i]);
goto clk_err;
}
priv->clock_count++;
}
} else if (clock_nb != -ENOENT) {
- error("failed to get clock phandle(%d)\n", clock_nb);
+ pr_err("failed to get clock phandle(%d)\n", clock_nb);
return clock_nb;
}
@@ -74,28 +74,28 @@
err = reset_deassert(&priv->resets[i]);
if (err) {
- error("failed to deassert reset %d\n", i);
+ pr_err("failed to deassert reset %d\n", i);
reset_free(&priv->resets[i]);
goto reset_err;
}
priv->reset_count++;
}
} else if (reset_nb != -ENOENT) {
- error("failed to get reset phandle(%d)\n", reset_nb);
+ pr_err("failed to get reset phandle(%d)\n", reset_nb);
goto clk_err;
}
err = generic_phy_get_by_index(dev, 0, &priv->phy);
if (err) {
if (err != -ENOENT) {
- error("failed to get usb phy\n");
+ pr_err("failed to get usb phy\n");
goto reset_err;
}
} else {
err = generic_phy_init(&priv->phy);
if (err) {
- error("failed to init usb phy\n");
+ pr_err("failed to init usb phy\n");
goto reset_err;
}
}
@@ -110,17 +110,17 @@
if (generic_phy_valid(&priv->phy)) {
ret = generic_phy_exit(&priv->phy);
if (ret)
- error("failed to release phy\n");
+ pr_err("failed to release phy\n");
}
reset_err:
ret = reset_release_all(priv->resets, priv->reset_count);
if (ret)
- error("failed to assert all resets\n");
+ pr_err("failed to assert all resets\n");
clk_err:
ret = clk_release_all(priv->clocks, priv->clock_count);
if (ret)
- error("failed to disable all clocks\n");
+ pr_err("failed to disable all clocks\n");
return err;
}
diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index 4191a89..258d1cd 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -128,13 +128,13 @@
ret = generic_phy_get_by_index(dev, 0, &plat->usb_phy);
if (ret) {
if (ret != -ENOENT) {
- error("Failed to get USB PHY for %s\n", dev->name);
+ pr_err("Failed to get USB PHY for %s\n", dev->name);
return ret;
}
} else {
ret = generic_phy_init(&plat->usb_phy);
if (ret) {
- error("Can't init USB PHY for %s\n", dev->name);
+ pr_err("Can't init USB PHY for %s\n", dev->name);
return ret;
}
}
@@ -161,7 +161,7 @@
if (generic_phy_valid(&plat->usb_phy)) {
ret = generic_phy_exit(&plat->usb_phy);
if (ret) {
- error("Can't deinit USB PHY for %s\n", dev->name);
+ pr_err("Can't deinit USB PHY for %s\n", dev->name);
return ret;
}
}
diff --git a/drivers/usb/host/xhci-rockchip.c b/drivers/usb/host/xhci-rockchip.c
index ca3abff..b1f9884 100644
--- a/drivers/usb/host/xhci-rockchip.c
+++ b/drivers/usb/host/xhci-rockchip.c
@@ -46,7 +46,7 @@
*/
plat->hcd_base = dev_read_addr(dev);
if (plat->hcd_base == FDT_ADDR_T_NONE) {
- error("Can't get the XHCI register base address\n");
+ pr_err("Can't get the XHCI register base address\n");
return -ENXIO;
}
@@ -60,7 +60,7 @@
}
if (plat->phy_base == FDT_ADDR_T_NONE) {
- error("Can't get the usbphy register address\n");
+ pr_err("Can't get the usbphy register address\n");
return -ENXIO;
}
@@ -117,7 +117,7 @@
ret = dwc3_core_init(rkxhci->dwc3_reg);
if (ret) {
- error("failed to initialize core\n");
+ pr_err("failed to initialize core\n");
return ret;
}
@@ -149,14 +149,14 @@
if (plat->vbus_supply) {
ret = regulator_set_enable(plat->vbus_supply, true);
if (ret) {
- error("XHCI: failed to set VBus supply\n");
+ pr_err("XHCI: failed to set VBus supply\n");
return ret;
}
}
ret = rockchip_xhci_core_init(ctx, dev);
if (ret) {
- error("XHCI: failed to initialize controller\n");
+ pr_err("XHCI: failed to initialize controller\n");
return ret;
}
@@ -179,7 +179,7 @@
if (plat->vbus_supply) {
ret = regulator_set_enable(plat->vbus_supply, false);
if (ret)
- error("XHCI: failed to set VBus supply\n");
+ pr_err("XHCI: failed to set VBus supply\n");
}
return ret;
diff --git a/drivers/usb/musb-new/ti-musb.c b/drivers/usb/musb-new/ti-musb.c
index de10131..233857a 100644
--- a/drivers/usb/musb-new/ti-musb.c
+++ b/drivers/usb/musb-new/ti-musb.c
@@ -106,7 +106,7 @@
"mentor,multipoint",
-1);
if (platdata->musb_config.multipoint < 0) {
- error("MUSB multipoint DT entry missing\n");
+ pr_err("MUSB multipoint DT entry missing\n");
return -ENOENT;
}
@@ -115,14 +115,14 @@
platdata->musb_config.num_eps = fdtdec_get_int(fdt, node,
"mentor,num-eps", -1);
if (platdata->musb_config.num_eps < 0) {
- error("MUSB num-eps DT entry missing\n");
+ pr_err("MUSB num-eps DT entry missing\n");
return -ENOENT;
}
platdata->musb_config.ram_bits = fdtdec_get_int(fdt, node,
"mentor,ram-bits", -1);
if (platdata->musb_config.ram_bits < 0) {
- error("MUSB ram-bits DT entry missing\n");
+ pr_err("MUSB ram-bits DT entry missing\n");
return -ENOENT;
}
@@ -132,7 +132,7 @@
platdata->plat.power = fdtdec_get_int(fdt, node, "mentor,power", -1);
if (platdata->plat.power < 0) {
- error("MUSB mentor,power DT entry missing\n");
+ pr_err("MUSB mentor,power DT entry missing\n");
return -ENOENT;
}
@@ -183,7 +183,7 @@
ret = ti_musb_ofdata_to_platdata(dev);
if (ret) {
- error("platdata dt parse error\n");
+ pr_err("platdata dt parse error\n");
return ret;
}
@@ -229,7 +229,7 @@
ret = device_bind_driver_to_node(parent, "ti-musb-host",
name, offset_to_ofnode(node), &dev);
if (ret) {
- error("musb - not able to bind usb host node\n");
+ pr_err("musb - not able to bind usb host node\n");
return ret;
}
break;
diff --git a/drivers/video/am335x-fb.c b/drivers/video/am335x-fb.c
index bb5cc97..a8b3e74 100644
--- a/drivers/video/am335x-fb.c
+++ b/drivers/video/am335x-fb.c
@@ -128,7 +128,7 @@
raster_ctrl |= LCD_TFT_24BPP_MODE;
break;
default:
- error("am335x-fb: invalid bpp value: %d\n", panel->bpp);
+ pr_err("am335x-fb: invalid bpp value: %d\n", panel->bpp);
return -1;
}
diff --git a/env/common.c b/env/common.c
index b403bd5..70715bb 100644
--- a/env/common.c
+++ b/env/common.c
@@ -84,7 +84,7 @@
if (himport_r(&env_htab, (char *)default_environment,
sizeof(default_environment), '\0', flags, 0,
0, NULL) == 0)
- error("Environment import failed: errno = %d\n", errno);
+ pr_err("Environment import failed: errno = %d\n", errno);
gd->flags |= GD_FLG_ENV_READY;
gd->flags |= GD_FLG_ENV_DEFAULT;
@@ -172,7 +172,7 @@
/* Decrypt the env if desired. */
ret = env_aes_cbc_crypt(ep, 0);
if (ret) {
- error("Failed to decrypt env!\n");
+ pr_err("Failed to decrypt env!\n");
set_default_env("!import failed");
return ret;
}
@@ -183,7 +183,7 @@
return 1;
}
- error("Cannot import environment: errno = %d\n", errno);
+ pr_err("Cannot import environment: errno = %d\n", errno);
set_default_env("!import failed");
@@ -247,7 +247,7 @@
res = (char *)env_out->data;
len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL);
if (len < 0) {
- error("Cannot export environment: errno = %d\n", errno);
+ pr_err("Cannot export environment: errno = %d\n", errno);
return 1;
}
diff --git a/env/sf.c b/env/sf.c
index 6f74371..e51b1ae 100644
--- a/env/sf.c
+++ b/env/sf.c
@@ -236,7 +236,7 @@
ret = env_import((char *)ep, 0);
if (!ret) {
- error("Cannot import environment: errno = %d\n", errno);
+ pr_err("Cannot import environment: errno = %d\n", errno);
set_default_env("!env_import failed");
}
diff --git a/fs/jffs2/jffs2_nand_1pass.c b/fs/jffs2/jffs2_nand_1pass.c
index 1d63fc9..b16005e 100644
--- a/fs/jffs2/jffs2_nand_1pass.c
+++ b/fs/jffs2/jffs2_nand_1pass.c
@@ -798,7 +798,7 @@
struct mtdids *id = part->dev->id;
mtd = get_nand_dev_by_index(id->num);
if (!mtd) {
- error("\nno NAND devices available\n");
+ pr_err("\nno NAND devices available\n");
return 0;
}
diff --git a/fs/yaffs2/yaffs_uboot_glue.c b/fs/yaffs2/yaffs_uboot_glue.c
index bd66d316..2a70e4a 100644
--- a/fs/yaffs2/yaffs_uboot_glue.c
+++ b/fs/yaffs2/yaffs_uboot_glue.c
@@ -168,7 +168,7 @@
mtd = get_nand_dev_by_index(flash_dev);
if (!mtd) {
- error("\nno NAND devices available\n");
+ pr_err("\nno NAND devices available\n");
return;
}