| /* |
| * Copyright 2011 Linaro Limited |
| * Aneesh V <aneesh@ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <asm/setup.h> |
| #include <asm/arch/sys_proto.h> |
| static void do_cancel_out(u32 *num, u32 *den, u32 factor) |
| { |
| while (1) { |
| if (((*num)/factor*factor == (*num)) && |
| ((*den)/factor*factor == (*den))) { |
| (*num) /= factor; |
| (*den) /= factor; |
| } else |
| break; |
| } |
| } |
| |
| #ifdef CONFIG_FASTBOOT_FLASH |
| static void omap_set_fastboot_cpu(void) |
| { |
| char *cpu; |
| u32 cpu_rev = omap_revision(); |
| |
| switch (cpu_rev) { |
| case DRA752_ES1_0: |
| case DRA752_ES1_1: |
| case DRA752_ES2_0: |
| cpu = "DRA752"; |
| break; |
| case DRA722_ES1_0: |
| case DRA722_ES2_0: |
| cpu = "DRA722"; |
| break; |
| default: |
| cpu = NULL; |
| printf("Warning: fastboot.cpu: unknown CPU rev: %u\n", cpu_rev); |
| } |
| |
| env_set("fastboot.cpu", cpu); |
| } |
| |
| static void omap_set_fastboot_secure(void) |
| { |
| const char *secure; |
| u32 dev = get_device_type(); |
| |
| switch (dev) { |
| case EMU_DEVICE: |
| secure = "EMU"; |
| break; |
| case HS_DEVICE: |
| secure = "HS"; |
| break; |
| case GP_DEVICE: |
| secure = "GP"; |
| break; |
| default: |
| secure = NULL; |
| printf("Warning: fastboot.secure: unknown CPU sec: %u\n", dev); |
| } |
| |
| env_set("fastboot.secure", secure); |
| } |
| |
| static void omap_set_fastboot_board_rev(void) |
| { |
| const char *board_rev; |
| |
| board_rev = env_get("board_rev"); |
| if (board_rev == NULL) |
| printf("Warning: fastboot.board_rev: unknown board revision\n"); |
| |
| env_set("fastboot.board_rev", board_rev); |
| } |
| |
| #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV |
| static u32 omap_mmc_get_part_size(const char *part) |
| { |
| int res; |
| struct blk_desc *dev_desc; |
| disk_partition_t info; |
| u64 sz = 0; |
| |
| dev_desc = blk_get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV); |
| if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) { |
| pr_err("invalid mmc device\n"); |
| return 0; |
| } |
| |
| res = part_get_info_by_name(dev_desc, part, &info); |
| if (res < 0) { |
| pr_err("cannot find partition: '%s'\n", part); |
| return 0; |
| } |
| |
| /* Calculate size in bytes */ |
| sz = (info.size * (u64)info.blksz); |
| /* to KiB */ |
| sz >>= 10; |
| |
| return (u32)sz; |
| } |
| |
| static void omap_set_fastboot_userdata_size(void) |
| { |
| char buf[16]; |
| u32 sz_kb; |
| |
| sz_kb = omap_mmc_get_part_size("userdata"); |
| if (sz_kb == 0) { |
| buf[0] = '\0'; |
| printf("Warning: fastboot.userdata_size: unable to calc\n"); |
| } else { |
| sprintf(buf, "%u", sz_kb); |
| } |
| |
| env_set("fastboot.userdata_size", buf); |
| } |
| #else |
| static inline void omap_set_fastboot_userdata_size(void) |
| { |
| } |
| #endif /* CONFIG_FASTBOOT_FLASH_MMC_DEV */ |
| void omap_set_fastboot_vars(void) |
| { |
| omap_set_fastboot_cpu(); |
| omap_set_fastboot_secure(); |
| omap_set_fastboot_board_rev(); |
| omap_set_fastboot_userdata_size(); |
| } |
| #endif /* CONFIG_FASTBOOT_FLASH */ |
| |
| /* |
| * Cancel out the denominator and numerator of a fraction |
| * to get smaller numerator and denominator. |
| */ |
| void cancel_out(u32 *num, u32 *den, u32 den_limit) |
| { |
| do_cancel_out(num, den, 2); |
| do_cancel_out(num, den, 3); |
| do_cancel_out(num, den, 5); |
| do_cancel_out(num, den, 7); |
| do_cancel_out(num, den, 11); |
| do_cancel_out(num, den, 13); |
| do_cancel_out(num, den, 17); |
| while ((*den) > den_limit) { |
| *num /= 2; |
| /* |
| * Round up the denominator so that the final fraction |
| * (num/den) is always <= the desired value |
| */ |
| *den = (*den + 1) / 2; |
| } |
| } |
| |
| __weak void omap_die_id(unsigned int *die_id) |
| { |
| die_id[0] = die_id[1] = die_id[2] = die_id[3] = 0; |
| } |
| |
| void omap_die_id_serial(void) |
| { |
| unsigned int die_id[4] = { 0 }; |
| char serial_string[17] = { 0 }; |
| |
| omap_die_id((unsigned int *)&die_id); |
| |
| if (!env_get("serial#")) { |
| snprintf(serial_string, sizeof(serial_string), |
| "%08x%08x", die_id[0], die_id[3]); |
| |
| env_set("serial#", serial_string); |
| } |
| } |
| |
| void omap_die_id_get_board_serial(struct tag_serialnr *serialnr) |
| { |
| char *serial_string; |
| unsigned long long serial; |
| |
| serial_string = env_get("serial#"); |
| |
| if (serial_string) { |
| serial = simple_strtoull(serial_string, NULL, 16); |
| |
| serialnr->high = (unsigned int) (serial >> 32); |
| serialnr->low = (unsigned int) (serial & 0xffffffff); |
| } else { |
| serialnr->high = 0; |
| serialnr->low = 0; |
| } |
| } |
| |
| void omap_die_id_usbethaddr(void) |
| { |
| unsigned int die_id[4] = { 0 }; |
| unsigned char mac[6] = { 0 }; |
| |
| omap_die_id((unsigned int *)&die_id); |
| |
| if (!env_get("usbethaddr")) { |
| /* |
| * Create a fake MAC address from the processor ID code. |
| * First byte is 0x02 to signify locally administered. |
| */ |
| mac[0] = 0x02; |
| mac[1] = die_id[3] & 0xff; |
| mac[2] = die_id[2] & 0xff; |
| mac[3] = die_id[1] & 0xff; |
| mac[4] = die_id[0] & 0xff; |
| mac[5] = (die_id[0] >> 8) & 0xff; |
| |
| eth_env_set_enetaddr("usbethaddr", mac); |
| } |
| } |
| |
| void omap_die_id_display(void) |
| { |
| unsigned int die_id[4] = { 0 }; |
| |
| omap_die_id(die_id); |
| |
| printf("OMAP die ID: %08x%08x%08x%08x\n", die_id[3], die_id[2], |
| die_id[1], die_id[0]); |
| } |