| /* |
| * PCIe driver for Marvell MVEBU SoCs |
| * |
| * Based on Barebox drivers/pci/pci-mvebu.c |
| * |
| * Ported to U-Boot by: |
| * Anton Schubert <anton.schubert@gmx.de> |
| * Stefan Roese <sr@denx.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| */ |
| |
| #include <common.h> |
| #include <pci.h> |
| #include <linux/errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/soc.h> |
| #include <linux/mbus.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* PCIe unit register offsets */ |
| #define SELECT(x, n) ((x >> n) & 1UL) |
| |
| #define PCIE_DEV_ID_OFF 0x0000 |
| #define PCIE_CMD_OFF 0x0004 |
| #define PCIE_DEV_REV_OFF 0x0008 |
| #define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) |
| #define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) |
| #define PCIE_CAPAB_OFF 0x0060 |
| #define PCIE_CTRL_STAT_OFF 0x0068 |
| #define PCIE_HEADER_LOG_4_OFF 0x0128 |
| #define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4)) |
| #define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) |
| #define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) |
| #define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) |
| #define PCIE_WIN5_CTRL_OFF 0x1880 |
| #define PCIE_WIN5_BASE_OFF 0x1884 |
| #define PCIE_WIN5_REMAP_OFF 0x188c |
| #define PCIE_CONF_ADDR_OFF 0x18f8 |
| #define PCIE_CONF_ADDR_EN BIT(31) |
| #define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) |
| #define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) |
| #define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) |
| #define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8) |
| #define PCIE_CONF_ADDR(dev, reg) \ |
| (PCIE_CONF_BUS(PCI_BUS(dev)) | PCIE_CONF_DEV(PCI_DEV(dev)) | \ |
| PCIE_CONF_FUNC(PCI_FUNC(dev)) | PCIE_CONF_REG(reg) | \ |
| PCIE_CONF_ADDR_EN) |
| #define PCIE_CONF_DATA_OFF 0x18fc |
| #define PCIE_MASK_OFF 0x1910 |
| #define PCIE_MASK_ENABLE_INTS (0xf << 24) |
| #define PCIE_CTRL_OFF 0x1a00 |
| #define PCIE_CTRL_X1_MODE BIT(0) |
| #define PCIE_STAT_OFF 0x1a04 |
| #define PCIE_STAT_BUS (0xff << 8) |
| #define PCIE_STAT_DEV (0x1f << 16) |
| #define PCIE_STAT_LINK_DOWN BIT(0) |
| #define PCIE_DEBUG_CTRL 0x1a60 |
| #define PCIE_DEBUG_SOFT_RESET BIT(20) |
| |
| struct resource { |
| u32 start; |
| u32 end; |
| }; |
| |
| struct mvebu_pcie { |
| struct pci_controller hose; |
| char *name; |
| void __iomem *base; |
| void __iomem *membase; |
| struct resource mem; |
| void __iomem *iobase; |
| u32 port; |
| u32 lane; |
| u32 lane_mask; |
| pci_dev_t dev; |
| }; |
| |
| #define to_pcie(_hc) container_of(_hc, struct mvebu_pcie, pci) |
| |
| /* |
| * MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped |
| * into SoCs address space. Each controller will map 32M of MEM |
| * and 64K of I/O space when registered. |
| */ |
| static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE; |
| #define PCIE_MEM_SIZE (32 << 20) |
| |
| #if defined(CONFIG_ARMADA_38X) |
| #define PCIE_BASE(if) \ |
| ((if) == 0 ? \ |
| MVEBU_REG_PCIE0_BASE : \ |
| (MVEBU_REG_PCIE_BASE + 0x4000 * (if - 1))) |
| |
| /* |
| * On A38x MV6820 these PEX ports are supported: |
| * 0 - Port 0.0 |
| * 1 - Port 1.0 |
| * 2 - Port 2.0 |
| * 3 - Port 3.0 |
| */ |
| #define MAX_PEX 4 |
| static struct mvebu_pcie pcie_bus[MAX_PEX]; |
| |
| static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx, |
| int *mem_target, int *mem_attr) |
| { |
| u8 port[] = { 0, 1, 2, 3 }; |
| u8 lane[] = { 0, 0, 0, 0 }; |
| u8 target[] = { 8, 4, 4, 4 }; |
| u8 attr[] = { 0xe8, 0xe8, 0xd8, 0xb8 }; |
| |
| pcie->port = port[pex_idx]; |
| pcie->lane = lane[pex_idx]; |
| *mem_target = target[pex_idx]; |
| *mem_attr = attr[pex_idx]; |
| } |
| #else |
| #define PCIE_BASE(if) \ |
| ((if) < 8 ? \ |
| (MVEBU_REG_PCIE_BASE + ((if) / 4) * 0x40000 + ((if) % 4) * 0x4000) : \ |
| (MVEBU_REG_PCIE_BASE + 0x2000 + ((if) % 8) * 0x40000)) |
| |
| /* |
| * On AXP MV78460 these PEX ports are supported: |
| * 0 - Port 0.0 |
| * 1 - Port 0.1 |
| * 2 - Port 0.2 |
| * 3 - Port 0.3 |
| * 4 - Port 1.0 |
| * 5 - Port 1.1 |
| * 6 - Port 1.2 |
| * 7 - Port 1.3 |
| * 8 - Port 2.0 |
| * 9 - Port 3.0 |
| */ |
| #define MAX_PEX 10 |
| static struct mvebu_pcie pcie_bus[MAX_PEX]; |
| |
| static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx, |
| int *mem_target, int *mem_attr) |
| { |
| u8 port[] = { 0, 0, 0, 0, 1, 1, 1, 1, 2, 3 }; |
| u8 lane[] = { 0, 1, 2, 3, 0, 1, 2, 3, 0, 0 }; |
| u8 target[] = { 4, 4, 4, 4, 8, 8, 8, 8, 4, 8 }; |
| u8 attr[] = { 0xe8, 0xd8, 0xb8, 0x78, |
| 0xe8, 0xd8, 0xb8, 0x78, |
| 0xf8, 0xf8 }; |
| |
| pcie->port = port[pex_idx]; |
| pcie->lane = lane[pex_idx]; |
| *mem_target = target[pex_idx]; |
| *mem_attr = attr[pex_idx]; |
| } |
| #endif |
| |
| static int mvebu_pex_unit_is_x4(int pex_idx) |
| { |
| int pex_unit = pex_idx < 9 ? pex_idx >> 2 : 3; |
| u32 mask = (0x0f << (pex_unit * 8)); |
| |
| return (readl(COMPHY_REFCLK_ALIGNMENT) & mask) == mask; |
| } |
| |
| static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie) |
| { |
| u32 val; |
| val = readl(pcie->base + PCIE_STAT_OFF); |
| return !(val & PCIE_STAT_LINK_DOWN); |
| } |
| |
| static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie *pcie, int busno) |
| { |
| u32 stat; |
| |
| stat = readl(pcie->base + PCIE_STAT_OFF); |
| stat &= ~PCIE_STAT_BUS; |
| stat |= busno << 8; |
| writel(stat, pcie->base + PCIE_STAT_OFF); |
| } |
| |
| static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie *pcie, int devno) |
| { |
| u32 stat; |
| |
| stat = readl(pcie->base + PCIE_STAT_OFF); |
| stat &= ~PCIE_STAT_DEV; |
| stat |= devno << 16; |
| writel(stat, pcie->base + PCIE_STAT_OFF); |
| } |
| |
| static int mvebu_pcie_get_local_bus_nr(struct mvebu_pcie *pcie) |
| { |
| u32 stat; |
| |
| stat = readl(pcie->base + PCIE_STAT_OFF); |
| return (stat & PCIE_STAT_BUS) >> 8; |
| } |
| |
| static int mvebu_pcie_get_local_dev_nr(struct mvebu_pcie *pcie) |
| { |
| u32 stat; |
| |
| stat = readl(pcie->base + PCIE_STAT_OFF); |
| return (stat & PCIE_STAT_DEV) >> 16; |
| } |
| |
| static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose) |
| { |
| return container_of(hose, struct mvebu_pcie, hose); |
| } |
| |
| static int mvebu_pcie_read_config_dword(struct pci_controller *hose, |
| pci_dev_t dev, int offset, u32 *val) |
| { |
| struct mvebu_pcie *pcie = hose_to_pcie(hose); |
| int local_bus = PCI_BUS(pcie->dev); |
| int local_dev = PCI_DEV(pcie->dev); |
| u32 reg; |
| |
| /* Only allow one other device besides the local one on the local bus */ |
| if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) { |
| if (local_dev == 0 && PCI_DEV(dev) != 1) { |
| /* |
| * If local dev is 0, the first other dev can |
| * only be 1 |
| */ |
| *val = 0xffffffff; |
| return 1; |
| } else if (local_dev != 0 && PCI_DEV(dev) != 0) { |
| /* |
| * If local dev is not 0, the first other dev can |
| * only be 0 |
| */ |
| *val = 0xffffffff; |
| return 1; |
| } |
| } |
| |
| /* write address */ |
| reg = PCIE_CONF_ADDR(dev, offset); |
| writel(reg, pcie->base + PCIE_CONF_ADDR_OFF); |
| *val = readl(pcie->base + PCIE_CONF_DATA_OFF); |
| |
| return 0; |
| } |
| |
| static int mvebu_pcie_write_config_dword(struct pci_controller *hose, |
| pci_dev_t dev, int offset, u32 val) |
| { |
| struct mvebu_pcie *pcie = hose_to_pcie(hose); |
| int local_bus = PCI_BUS(pcie->dev); |
| int local_dev = PCI_DEV(pcie->dev); |
| |
| /* Only allow one other device besides the local one on the local bus */ |
| if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) { |
| if (local_dev == 0 && PCI_DEV(dev) != 1) { |
| /* |
| * If local dev is 0, the first other dev can |
| * only be 1 |
| */ |
| return 1; |
| } else if (local_dev != 0 && PCI_DEV(dev) != 0) { |
| /* |
| * If local dev is not 0, the first other dev can |
| * only be 0 |
| */ |
| return 1; |
| } |
| } |
| |
| writel(PCIE_CONF_ADDR(dev, offset), pcie->base + PCIE_CONF_ADDR_OFF); |
| writel(val, pcie->base + PCIE_CONF_DATA_OFF); |
| |
| return 0; |
| } |
| |
| /* |
| * Setup PCIE BARs and Address Decode Wins: |
| * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks |
| * WIN[0-3] -> DRAM bank[0-3] |
| */ |
| static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie) |
| { |
| const struct mbus_dram_target_info *dram = mvebu_mbus_dram_info(); |
| u32 size; |
| int i; |
| |
| /* First, disable and clear BARs and windows. */ |
| for (i = 1; i < 3; i++) { |
| writel(0, pcie->base + PCIE_BAR_CTRL_OFF(i)); |
| writel(0, pcie->base + PCIE_BAR_LO_OFF(i)); |
| writel(0, pcie->base + PCIE_BAR_HI_OFF(i)); |
| } |
| |
| for (i = 0; i < 5; i++) { |
| writel(0, pcie->base + PCIE_WIN04_CTRL_OFF(i)); |
| writel(0, pcie->base + PCIE_WIN04_BASE_OFF(i)); |
| writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i)); |
| } |
| |
| writel(0, pcie->base + PCIE_WIN5_CTRL_OFF); |
| writel(0, pcie->base + PCIE_WIN5_BASE_OFF); |
| writel(0, pcie->base + PCIE_WIN5_REMAP_OFF); |
| |
| /* Setup windows for DDR banks. Count total DDR size on the fly. */ |
| size = 0; |
| for (i = 0; i < dram->num_cs; i++) { |
| const struct mbus_dram_window *cs = dram->cs + i; |
| |
| writel(cs->base & 0xffff0000, |
| pcie->base + PCIE_WIN04_BASE_OFF(i)); |
| writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i)); |
| writel(((cs->size - 1) & 0xffff0000) | |
| (cs->mbus_attr << 8) | |
| (dram->mbus_dram_target_id << 4) | 1, |
| pcie->base + PCIE_WIN04_CTRL_OFF(i)); |
| |
| size += cs->size; |
| } |
| |
| /* Round up 'size' to the nearest power of two. */ |
| if ((size & (size - 1)) != 0) |
| size = 1 << fls(size); |
| |
| /* Setup BAR[1] to all DRAM banks. */ |
| writel(dram->cs[0].base | 0xc, pcie->base + PCIE_BAR_LO_OFF(1)); |
| writel(0, pcie->base + PCIE_BAR_HI_OFF(1)); |
| writel(((size - 1) & 0xffff0000) | 0x1, |
| pcie->base + PCIE_BAR_CTRL_OFF(1)); |
| } |
| |
| void pci_init_board(void) |
| { |
| int mem_target, mem_attr, i; |
| int bus = 0; |
| u32 reg; |
| u32 soc_ctrl = readl(MVEBU_SYSTEM_REG_BASE + 0x4); |
| |
| /* Check SoC Control Power State */ |
| debug("%s: SoC Control %08x, 0en %01lx, 1en %01lx, 2en %01lx\n", |
| __func__, soc_ctrl, SELECT(soc_ctrl, 0), SELECT(soc_ctrl, 1), |
| SELECT(soc_ctrl, 2)); |
| |
| for (i = 0; i < MAX_PEX; i++) { |
| struct mvebu_pcie *pcie = &pcie_bus[i]; |
| struct pci_controller *hose = &pcie->hose; |
| |
| /* Get port number, lane number and memory target / attr */ |
| mvebu_get_port_lane(pcie, i, &mem_target, &mem_attr); |
| |
| /* Don't read at all from pci registers if port power is down */ |
| if (SELECT(soc_ctrl, pcie->port) == 0) { |
| if (pcie->lane == 0) |
| debug("%s: skipping port %d\n", __func__, pcie->port); |
| continue; |
| } |
| |
| pcie->base = (void __iomem *)PCIE_BASE(i); |
| |
| /* Check link and skip ports that have no link */ |
| if (!mvebu_pcie_link_up(pcie)) { |
| debug("%s: PCIe %d.%d - down\n", __func__, |
| pcie->port, pcie->lane); |
| continue; |
| } |
| debug("%s: PCIe %d.%d - up, base %08x\n", __func__, |
| pcie->port, pcie->lane, (u32)pcie->base); |
| |
| /* Read Id info and local bus/dev */ |
| debug("direct conf read %08x, local bus %d, local dev %d\n", |
| readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie), |
| mvebu_pcie_get_local_dev_nr(pcie)); |
| |
| mvebu_pcie_set_local_bus_nr(pcie, bus); |
| mvebu_pcie_set_local_dev_nr(pcie, 0); |
| pcie->dev = PCI_BDF(bus, 0, 0); |
| |
| pcie->mem.start = (u32)mvebu_pcie_membase; |
| pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1; |
| mvebu_pcie_membase += PCIE_MEM_SIZE; |
| |
| if (mvebu_mbus_add_window_by_id(mem_target, mem_attr, |
| (phys_addr_t)pcie->mem.start, |
| PCIE_MEM_SIZE)) { |
| printf("PCIe unable to add mbus window for mem at %08x+%08x\n", |
| (u32)pcie->mem.start, PCIE_MEM_SIZE); |
| } |
| |
| /* Setup windows and configure host bridge */ |
| mvebu_pcie_setup_wins(pcie); |
| |
| /* Master + slave enable. */ |
| reg = readl(pcie->base + PCIE_CMD_OFF); |
| reg |= PCI_COMMAND_MEMORY; |
| reg |= PCI_COMMAND_MASTER; |
| reg |= BIT(10); /* disable interrupts */ |
| writel(reg, pcie->base + PCIE_CMD_OFF); |
| |
| /* Setup U-Boot PCI Controller */ |
| hose->first_busno = 0; |
| hose->current_busno = bus; |
| |
| /* PCI memory space */ |
| pci_set_region(hose->regions + 0, pcie->mem.start, |
| pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM); |
| pci_set_region(hose->regions + 1, |
| 0, 0, |
| gd->ram_size, |
| PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); |
| hose->region_count = 2; |
| |
| pci_set_ops(hose, |
| pci_hose_read_config_byte_via_dword, |
| pci_hose_read_config_word_via_dword, |
| mvebu_pcie_read_config_dword, |
| pci_hose_write_config_byte_via_dword, |
| pci_hose_write_config_word_via_dword, |
| mvebu_pcie_write_config_dword); |
| pci_register_hose(hose); |
| |
| hose->last_busno = pci_hose_scan(hose); |
| |
| /* Set BAR0 to internal registers */ |
| writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0)); |
| writel(0, pcie->base + PCIE_BAR_HI_OFF(0)); |
| |
| bus = hose->last_busno + 1; |
| |
| /* need to skip more for X4 links, otherwise scan will hang */ |
| if (mvebu_soc_family() == MVEBU_SOC_AXP) { |
| if (mvebu_pex_unit_is_x4(i)) |
| i += 3; |
| } |
| } |
| } |