blob: 124219314b89c42bb9e7a5c8e1d663feff0ccfdd [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* dts file for Xilinx ZynqMP ZCU208
*
* (C) Copyright 2017 - 2020, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
/dts-v1/;
#include "zynqmp.dtsi"
#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU208 RevA";
compatible = "xlnx,zynqmp-zcu208-revA", "xlnx,zynqmp-zcu208", "xlnx,zynqmp";
aliases {
ethernet0 = &gem3;
gpio0 = &gpio;
i2c0 = &i2c0;
i2c1 = &i2c1;
mmc0 = &sdhci1;
rtc0 = &rtc;
serial0 = &uart0;
serial1 = &dcc;
spi0 = &qspi;
usb0 = &usb0;
};
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
xlnx,eeprom = &eeprom;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
sw19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
wakeup-source;
autorepeat;
};
};
leds {
compatible = "gpio-leds";
heartbeat_led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
ina226-vccint {
compatible = "iio-hwmon";
io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
};
ina226-vccint-io-bram-ps {
compatible = "iio-hwmon";
io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
};
ina226-vcc1v8 {
compatible = "iio-hwmon";
io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>;
};
ina226-vcc1v2 {
compatible = "iio-hwmon";
io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>;
};
ina226-vadj-fmc {
compatible = "iio-hwmon";
io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
};
ina226-mgtavcc {
compatible = "iio-hwmon";
io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>;
};
ina226-mgt1v2 {
compatible = "iio-hwmon";
io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>;
};
ina226-mgt1v8 {
compatible = "iio-hwmon";
io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>;
};
ina226-vccint-ams {
compatible = "iio-hwmon";
io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>;
};
ina226-dac-avtt {
compatible = "iio-hwmon";
io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>;
};
ina226-dac-avccaux {
compatible = "iio-hwmon";
io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>;
};
ina226-adc-avcc {
compatible = "iio-hwmon";
io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>;
};
ina226-adc-avccaux {
compatible = "iio-hwmon";
io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>;
};
ina226-dac-avcc {
compatible = "iio-hwmon";
io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>;
};
};
&dcc {
status = "okay";
};
&fpd_dma_chan1 {
status = "okay";
};
&fpd_dma_chan2 {
status = "okay";
};
&fpd_dma_chan3 {
status = "okay";
};
&fpd_dma_chan4 {
status = "okay";
};
&fpd_dma_chan5 {
status = "okay";
};
&fpd_dma_chan6 {
status = "okay";
};
&fpd_dma_chan7 {
status = "okay";
};
&fpd_dma_chan8 {
status = "okay";
};
&gem3 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
phy0: ethernet-phy@c {
reg = <0xc>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
ti,dp83867-rxctrl-strap-quirk;
};
};
&gpio {
status = "okay";
gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */
"QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */
"QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */
"I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */
"", "", "BUTTON", "LED", "", /* 20 - 24 */
"", "PMU_INPUT", "", "", "", /* 25 - 29 */
"", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */
"PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */
"SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "", "", /* 40 - 44 */
"SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */
"SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */
"USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */
"USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */
"ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */
"ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */
"ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
"", "", /* 78 - 79 */
"", "", "", "", "", /* 80 - 84 */
"", "", "", "", "", /* 85 -89 */
"", "", "", "", "", /* 90 - 94 */
"", "", "", "", "", /* 95 - 99 */
"", "", "", "", "", /* 100 - 104 */
"", "", "", "", "", /* 105 - 109 */
"", "", "", "", "", /* 110 - 114 */
"", "", "", "", "", /* 115 - 119 */
"", "", "", "", "", /* 120 - 124 */
"", "", "", "", "", /* 125 - 129 */
"", "", "", "", "", /* 130 - 134 */
"", "", "", "", "", /* 135 - 139 */
"", "", "", "", "", /* 140 - 144 */
"", "", "", "", "", /* 145 - 149 */
"", "", "", "", "", /* 150 - 154 */
"", "", "", "", "", /* 155 - 159 */
"", "", "", "", "", /* 160 - 164 */
"", "", "", "", "", /* 165 - 169 */
"", "", "", ""; /* 170 - 174 */
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
tca6416_u15: gpio@20 { /* u15 */
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller; /* interrupt not connected */
#gpio-cells = <2>;
gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "DAC_AVTT_VOUT_SEL", /* 0 - 3 */
"", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */
"FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */
"", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */
};
i2c-mux@75 { /* u17 */
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x75>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/* PS_PMBUS */
/* PMBUS_ALERT done via pca9544 */
vccint: ina226@40 { /* u65 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vccint";
reg = <0x40>;
shunt-resistor = <5000>;
};
vccint_io_bram_ps: ina226@41 { /* u57 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vccint-io-bram-ps";
reg = <0x41>;
shunt-resistor = <5000>;
};
vcc1v8: ina226@42 { /* u60 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vcc1v8";
reg = <0x42>;
shunt-resistor = <2000>;
};
vcc1v2: ina226@43 { /* u58 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vcc1v2";
reg = <0x43>;
shunt-resistor = <5000>;
};
vadj_fmc: ina226@45 { /* u62 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vadj-fmc";
reg = <0x45>;
shunt-resistor = <5000>;
};
mgtavcc: ina226@46 { /* u67 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-mgtavcc";
reg = <0x46>;
shunt-resistor = <2000>;
};
mgt1v2: ina226@47 { /* u63 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-mgt1v2";
reg = <0x47>;
shunt-resistor = <5000>;
};
mgt1v8: ina226@48 { /* u64 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-mgt1v8";
reg = <0x48>;
shunt-resistor = <5000>;
};
vccint_ams: ina226@49 { /* u61 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vccint-ams";
reg = <0x49>;
shunt-resistor = <5000>;
};
dac_avtt: ina226@4a { /* u59 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-dac-avtt";
reg = <0x4a>;
shunt-resistor = <5000>;
};
dac_avccaux: ina226@4b { /* u124 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-dac-avccaux";
reg = <0x4b>;
shunt-resistor = <5000>;
};
adc_avcc: ina226@4c { /* u75 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-adc-avcc";
reg = <0x4c>;
shunt-resistor = <5000>;
};
adc_avccaux: ina226@4d { /* u71 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-adc-avccaux";
reg = <0x4d>;
shunt-resistor = <5000>;
};
dac_avcc: ina226@4e { /* u77 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-dac-avcc";
reg = <0x4e>;
shunt-resistor = <5000>;
};
};
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
/* NC */
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* u104 - ir35215 0x10/0x40 */
/* u127 - ir38164 0x1b/0x4b */
/* u112 - ir38164 0x13/0x43 */
/* u123 - ir38164 0x1c/0x4c */
irps5401_44: irps5401@44 { /* IRPS5401 - u53 */
compatible = "infineon,irps5401";
reg = <0x44>; /* i2c addr 0x14 */
};
irps5401_45: irps5401@45 { /* IRPS5401 - u55 */
compatible = "infineon,irps5401";
reg = <0x45>; /* i2c addr 0x15 */
};
/* J21 header too */
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
/* SYSMON */
};
};
/* u38 MPS430 */
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
i2c-mux@74 {
compatible = "nxp,pca9548"; /* u20 */
#address-cells = <1>;
#size-cells = <0>;
reg = <0x74>;
/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
i2c_eeprom: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/*
* IIC_EEPROM 1kB memory which uses 256B blocks
* where every block has different address.
* 0 - 256B address 0x54
* 256B - 512B address 0x55
* 512B - 768B address 0x56
* 768B - 1024B address 0x57
*/
eeprom: eeprom@54 { /* u21 */
compatible = "atmel,24c128";
reg = <0x54>;
};
};
i2c_si5341: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
si5341: clock-generator@36 { /* SI5341 - u43 */
compatible = "si5341";
reg = <0x36>;
};
};
i2c_si570_user_c0: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
clock-output-names = "si570_user_c0";
};
};
i2c_si570_mgt: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <156250000>;
clock-frequency = <148500000>;
clock-output-names = "si570_mgt";
};
};
i2c_8a34001: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
/* U409B - 8a34001 */
};
i2c_clk104: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
/* CLK104_SDA */
};
i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
/* RFMCP connector */
};
/* 7 NC */
};
i2c-mux@75 {
compatible = "nxp,pca9548"; /* u22 */
#address-cells = <1>;
#size-cells = <0>;
reg = <0x75>;
/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/* FMCP_HSPC_IIC */
};
i2c_si570_user_c1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
si570_3: clock-generator@5d { /* USER C1 SI570 - u130 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
clock-output-names = "si570_user_c1";
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* SYSMON */
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
/* DDR4 SODIMM */
};
i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
/* SFP3 */
};
i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
/* SFP2 */
};
i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
/* SFP1 */
};
i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
/* SFP0 */
};
};
/* MSP430 */
};
&qspi {
status = "okay";
is-dual = <1>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 1Gb */
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
};
&rtc {
status = "okay";
};
&sata {
status = "okay";
/* SATA OOB timing settings */
ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
phy-names = "sata-phy";
phys = <&lane3 PHY_TYPE_SATA 1 3 125000000>;
};
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
disable-wp;
/*
* This property should be removed for supporting UHS mode
*/
no-1-8-v;
xlnx,mio-bank = <1>;
};
&serdes {
status = "okay";
};
&uart0 {
status = "okay";
};
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
};
&dwc3_0 {
status = "okay";
dr_mode = "host";
snps,usb3_lpm_capable;
phy-names = "usb3-phy";
phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
};